AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9D6505 POWER BLADE AND TIP CIRCLE GROUP--Type 1 Part of 9D6470 and 9D6475 Power Blade and Tip Arrangements listed on Page 229 9D6427 Circle parts are shown on Page 120. AN ATTACHMENT 130G


IMPLEMENTS
CIRCLE GP
BRAKING SYSTEM
TANK GP
HYDRAULIC SYSTEM
VALVE GP-CHECK
MOTOR GP
DRIVE GP

MOTOR GRADER 130G MOTOR GRADER 74V
 130G MOTOR GRADER 74V00001-00587 (MACHINE) UEG0860S 130G 74V   (1975)

IMPLEMENTS

CIRCLE GP
CIRCLE GP
9D-3560 CIRCLE GP
CIRCLE GP
9D-6375 CIRCLE GP
CIRCLE GP
9D-8865 CIRCLE GP
POWER BLADE AND TIP CIRCLE GROUP
9D-6506 POWER BLADE AND TIP CIRCLE GROUP
CIRCLE GP
9D-6505 CIRCLE GP
POWER BLADE AND TIP CIRCLE ASSEMBLY
9D-6427 POWER BLADE AND TIP CIRCLE ASSEMBLY
CIRCLE AND BEAM ASSEMBLY
2G-3978 CIRCLE AND BEAM ASSEMBLY
 

#UEG0860S0180
 

9D-6506: POWER BLADE AND TIP CIRCLE GROUP

9D6505 POWER BLADE AND TIP CIRCLE GROUP--Type 1
Part of 9D6470 and 9D6475 Power Blade and Tip Arrangements listed on Page 229
9D6427 Circle parts are shown on Page 120. AN ATTACHMENT
c207470 UEG0860S
9D6506 POWER BLADE AND TIP CIRCLE GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 9D-6427 Y [1] CIRCLE ASSEM.  
    (Separate Illustration)
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 1.38 in.(3.51 cm) long  
  8F-4028 [2] SPACER .25 in.(.64 cm) long  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 [42] BOLT 1.125 in.(2.86 cm) long  
8. 5D-0134 [4] STRIP (end)  
  9D-6638 [1] STRIP (center)  
9. 8D-5946 [1] BRACKET ASSEM.  
    (Includes)
10. 8S-9092 [2] BOLT 2.25 in.(5.72 cm) long  
  1A-8537 [2] BOLT 2.75 in.(6.99 cm) long  
  3B-4510 [4] LOCKWASHER  
11. 5D-6644 [10] SHIM  
12. 8D-5863 [1] GUARD ASSEM.  
15. 2G-3221 C [5] SHIM .060 in.(.15 cm) thick  
17. 7F-3708 [2] PIN  
  1D-0503 [2] WASHER  
  2B-2673 [2] NUT  
  3B-4617 [2] COTTER PIN  
19. 8D-5842 C [1] BRACKET (L.H.)  
  8D-5841 [1] BRACKET (R.H.)  
20. 6D-6423 [2] BOLT  
  9F-4364 [2] NUT  
  0S-1822 [2] WASHER .25 in.(.64 cm) thick  
  7D-1446 [2] WASHER .188 in.(.48 cm) thick  
  2H-3768 [2] COTTER PIN  
22. 7F-0482 [4] NUT  
23. 8D-5949 [1] BAR  
24. 6D-5415 [10] PLATE  
25. 4B-4285 [2] WASHER .125 in.(.32 cm) thick  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0860S0181
 

9D-6505: CIRCLE GP

9D6505 POWER BLADE AND TIP CIRCLE GROUP--Type 2
Part of 9D6470 and 9D6475 Blade and Tip Arrangements listed on Page 229
2 G3978 Circle and Beam parts are shown on Page 120
AN ATTACHMENT
c159238 UEG0860S
9D6505 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 2G-3978 YC [1] CIRCLE ASSEM.  
    (Separate Illustration)
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 1.38 in.(3.51 cm) long  
  8F-4028 [2] SPACER .25 in.(.64 cm) long  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 [42] BOLT 1.125 in.(2.86 cm) long  
8. 5D-0134 [4] STRIP (end)  
  9D-6638 [1] STRIP (center)  
9. 8D-5946 [1] BRACKET ASSEM.  
    (Includes)
10. 8S-9092 [2] BOLT 2.25 in.(5.72 cm) long  
  1A-8537 [2] BOLT 2.75 in.(6.99 cm) long  
  3B-4510 [4] LOCKWASHER  
11. 5D-6644 [10] SHIM  
12. 8D-5863 [1] GUARD ASSEM.  
15. 2G-3221 [5] SHIM .060 in.(.15 cm) thick  
17. 7F-3708 [2] PIN  
  1D-0503 [2] WASHER  
  2B-2673 [2] NUT  
  3B-4617 [2] COTTER PIN  
19. 8D-5842 [1] BRACKET (L.H.)  
  8D-5841 [1] BRACKET (R.H.)  
20. 6D-6423 [2] BOLT  
  9F-4364 [2] NUT  
  0S-1822 [2] WASHER .25 in. (.64 cm) thick  
  7D-1446 [2] WASHER .188 in. (.48 cm) thick  
  2H-3768 [2] COTTER PIN  
22. 7F-0482 [4] NUT  
23. 8D-5949 [1] BAR  
24. 6D-5415 [10] PLATE  
25. 4B-4285 [2] WASHER .125 in.(.32 cm) thick  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0860S0182
 

9D-6427: POWER BLADE AND TIP CIRCLE ASSEMBLY

9D6427 POWER BLADE AND TIP CIRCLE ASSEMBLY
Replaced by 2G3978
Part of 9D6505 Power Blade and Tip Circle Group shown on Page 118A
c202535 UEG0860S
9D6427 POWER BLADE AND TIP CIRCLE ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-5037 [2] LOCK  
2. 8D-0461 [1] BRACE ASSEM.  
3. 9D-3221 [1] BRACKET  
4. 4D-4375 [2] LUG  
5. 6D-6547 [2] BEARING  
6. 6D-1886 [2] STOP  
7. 8D-3093 [2] SPACER  
  9D-2185 [2] SHIM (.100 in. thick)  
  9D-2186 [2] SHIM (.050 in. thick)  
 

#UEG0860S0183
 

2G-3978: CIRCLE AND BEAM ASSEMBLY

2G3978 CIRCLE AND BEAM ASSEMBLY
Part of 9D6505 Power Blade and Tip Circle Group shown on Page 119
c159239 UEG0860S
2G3978 CIRCLE AND BEAM ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-5037 [2] LOCK  
2. 6D-4689 [1] BRACE  
3. 2G-3971 [1] BRACKET ASSEM.  
4. 4D-4375 [2] LUG  
5. 6D-6547 [2] BEARING  
6. 6D-1886 [2] STOP  
7. 8D-3093 [2] SPACER  
  9D-2185 [2] SHIM 2.54 mm(.100 in.) thick  
  9D-2186 [2] SHIM 1.27 mm(.050 in.) thick  
8. 7B-5036 [2] SHAFT  
 

#UEG0860S0184
 

9D-5050: AIR RESERVOIR TANK GROUP

9D5050 AIR RESERVOIR TANK GROUP
c210278 UEG0860S
9D5050 AIR RESERVOIR TANK GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5339 [1] TUBE  
2. 3B-7259 [1] ELBOW  
3. 5P-4403 C [1] CONNECTOR  
4. 8F-8513 [3] CLIP  
5. 0S-1594 [3] BOLT  
6. 3B-4506 [7] LOCKWASHER  
7. 5P-2823 C [1] UNION  
8. 5P-1202 CH TUBE 61.72 cm(24.30 in.)  
9. 5P-4463 C [1] ELBOW  
10. 7D-6865 [1] BODY  
11. 7D-6864 [1] VALVE  
12. 7D-6936 [1] VALVE ASSEM. (check)  
13. 9D-5416 [1] AIR RESERVOIR  
14. 1P-7115 [4] GROMMET  
15. 0L-1319 [8] WASHER  
16. 0S-1571 C [4] BOLT  
  1D-4717 [4] NUT  
  4B-4278 [4] WASHER  
17. 2G-1034 C [1] VALVE (safety)  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0860S0185
 

9D-5060: AIR TANK GROUP

9D5060 AIR TANK GROUP
Part of 9D5440 Air and Brake Control Arrangement listed on Page 92
c207468 UEG0860S
9D5060 AIR TANK GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1202 CH TUBE 83.59 cm(32.91 in.)  
2. 5F-6049 [1] ELBOW  
3. 5B-8978 [1] TEE  
4. 8F-8513 [3] CLIP  
5. 5P-1202 CH TUBE 164.87 cm(64.91 in.)  
6. 3B-6553 [1] ELBOW  
7. 3H-5265 [1] UNION  
8. 5P-1202 CH TUBE 61.57 cm(24.24 in.)  
9. 2D-9155 [2] ELBOW  
10. 7D-6865 [2] BODY  
11. 7D-6864 [2] VALVE  
12. 7D-6936 [2] VALVE ASSEM. (check)  
13. 7B-4115 C [1] NIPPLE  
14. 1P-7115 [4] GROMMET  
15. 0L-1319 [8] WASHER  
16. 0S-1571 C [4] BOLT  
  1D-4717 [4] NUT  
  4B-4278 [4] WASHER  
17. 2G-1034 C [2] VALVE (safety)  
18. 8D-9761 [1] AIR RESERVOIR  
19. 3B-6496 [1] ELBOW  
20. 5F-6047 [2] CONNECTOR  
21. 3B-4506 [7] LOCKWASHER  
22. 0S-1594 [3] BOLT  
23. 5F-6051 [1] ELBOW  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0860S0186
 

8J-5913: VALVE GP

8J5913 PILOT OPERATED CHECK VALVE GROUP
Part of 8D8630 Circle Motor Lines, 9D6240 Blade Shift Lines, 8D8640 Hydraulic Power
Blade Lines, 2G1610 Hydraulic Blade Tip Lines and 8D8600 Hydraulic Leaning Wheel
Lines Groups shown on Pages 126, 140, 142, 143 and 154
c207401 UEG0860S
8J5913 VALVE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0404 [2] PLUG  
  7J-9933 C [2] SEAL  
3. 9J-4871 C [2] BALL  
4. 9J-0403 [2] SPRING  
5. 9J-8285 C [1] BODY ASSEM.  
    (Includes)
6. 9J-5768 [1] PISTON  
7. 9J-0405 [2] SEAT  
  C   INDICATES CHANGE
 

#UEG0860S0187
 

9J-0688: PISTON MOTOR GROUP

9J688 PISTON MOTOR GROUP
Serial No. 74V1 to 74V359 and 74V368 to 74V536 and 74V544 inclusive
Part of 8D7470 Circle Drive Group shown on Page 124
c203506 UEG0860S
9J0688 PISTON MOTOR GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0697 [3] PIN  
2. 9J-0695 [1] SPIDER  
3. 9J-0732 [1] RACE  
4. 5P-1827 [2] RACE  
5. 9J-0731 [1] HOUSING ASSEM.  
    (Includes)
6. 5P-1941 [1] BEARING  
7. 008-3214 [1] RING  
8. 9J-0740 [1] SHAFT  
9. 5P-1825 [1] SEAL  
10. 5P-1828 [1] BEARING  
11. 9J-0736 [1] PIVOT  
12. 9J-2501 [1] RETAINER  
13. 9J-0735 [1] WASHER  
14. 9J-0741 [1] SPRING  
15. 9J-0730 [1] BARREL  
16. 9J-0734 [1] WASHER  
17. 1A-9579 C [6] BOLT  
18. 4F-3544 [1] RING  
19. 9J-0733 [1] PLATE ASSEM.  
    (Includes)
20. 033-5381 [1] BEARING  
21. 1L-3768 [1] RING  
22. 3K-0715 [1] SEAL  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  9J-0738 [1] KIT (piston)  
  C   INDICATES CHANGE
 

#UEG0860S0188
 

9J-0439: MOTOR GP-PISTON

9J439 PISTON MOTOR GROUP
Serial No. 74V360 to 74V367, 74V537 to 74V543 and 74V545-Up
Part of 8D7470 Circle Drive Group shown on Page 124B
c200258 UEG0860S
9J0439 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1829 [1] BEARING  
2. 2R-1236 [1] RING  
3. 9J-0450 [1] SPACER  
4. 9J-0449 [2] DOWEL  
5. 9J-0443 [1] PLATE ASSEM.  
    (Includes)
6. 033-5381 [1] BEARING  
7. 0S-1590 [4] BOLT  
8. 5P-1830 [1] BEARING  
9. 2N-8611 [1] RING  
10. 9J-0441 [1] CARTRIDGE ASSEM. (15 GPM)  
11. 9J-0438 [1] HOUSING  
12. 9J-0446 [1] RETAINER  
13. 2J-7550 [1] RING  
14. 9J-0442 [1] SHAFT  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  9J-0454 [1] SEAL KIT  
    (Includes Gasket and Seals)
 

#UEG0860S0189
 

8D-7470: DRIVE GP-CIRCLE

8D7470 CIRCLE DRIVE GROUP--Part 1 of 2
Serial No. 74V1 to 74V359 and 74V368 to 74V536 and 74V544 inclusive
9J688 Motor parts are shown on Page 123
c200510 UEG0860S
8D7470 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0688 Y [1] MOTOR GROUP  
    (Separate Illustration)
2. 1B-4038 [2] CUP  
  1B-4046 [2] CONE  
3. 1B-5174 [1] PLUG  
4. 9D-1142 [1] WORM  
5. 5K-8454 [3] BOLT  
6. 3B-4508 [10] LOCKWASHER  
7. 6H-1717 [5] BOLT  
8. 2B-7410 [1] PLUG  
9. 2H-9247 [1] SEAL  
10. 9D-1051 [1] CARRIER  
11. 7D-8933 [3] SHAFT  
12. 7D-9015 [3] BEARING  
13. 7D-8932 [6] WASHER  
14. 7D-8931 [1] WASHER  
15. 1H-8128 [1] SEAL  
16. 7D-8929 [3] GEAR  
17. 7D-9092 [1] HOUSING ASSEM.  
    (Includes)
18. 2D-8806 [2] STUD  
19. 1D-4719 [2] NUT  
20. 7D-8983 [10] SHIM (.005 in. thick)  
  7D-8984 [6] SHIM (.007 in. thick)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Foreword
CIRCLE AND DRAWBAR
When Required
CIRCLE AND DRAWBAR
Special Instruction
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Specifications
Drive For The Circle
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Circle Drive Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Circle Drive With Slip Clutch Group (Attachment)<BR> (5T0570 - 12G, 120G, 130G, 140G)
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Circle Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Reuse And Salvage Guidelines
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Disassembly and Assembly
Swivel Joint
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drawbar
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive Motor
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive And Blade Sideshift Lock Check Valves
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drawbar
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drawbar Bolt
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drawbar Bolt
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive Motor (Earlier)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive Motor (Later)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive (Earlier)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive (Later)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Service Magazine
One-Piece Shaft And Lower Brace Made From A Tube Are Now Used In The Circle And Beam Assembly{6154}
1980/04/14
Reinforcement Plate Can Be Installed On Circle Drawbar{6153}
1980/05/26
Front 120&deg; Of Circle Assembly Is Now Heat Treated; Lower Brace Has A Tube And A One-Piece Shaft{6154}
1980/06/02
New Drawbar And Yoke Assembly Has Improved Ball Joint; New Wear Strips Used Between Circle And Drawbar{6153,6154,6155,6170,6171}
1980/08/25
Slip Clutches Now Available On Circle Drive Group{5058,5237,5207,6154}
1981/02/09
New Circle Guide Shoes Can Be Adjusted For Better Control Of Clearance Between Circle Teeth And Drive Pinion{6155,6153}
1981/07/13
6V6037, 6V6038, And 6V6039 Template Available For Installation Of Circle Tooth Segments{0626,6152}
1982/05/10
Improved Circle Tooth Segment{6152}
1982/08/16
New Shims Available To Make Drawbar Wear Strips Level{6153}
1982/09/06
New, Narrower Blade Tip Brackets Used{5254,6154}
1982/10/11
New Drawbar Group Has Several Improvements{6153,6155}
1982/10/11
Lubrication Of Bronze Alloy Wear Strips Is Not Necessary{6155}
1984/01/30
Less Oil Used In Circle Drive Group To Prevent Leakage Through Vent Assembly{5207}
1984/01/30
Replacement Circle Guide Shoes And Bronze Alloy Wear Strips Available For Parts Service{6150,6154,6155}
1984/09/17
Lubrication Of Circle Drive Pinion And Wear Strips; Wear Strip Clearance Adjustment{5207,6155}
1984/11/05
Order The Correct Replacement Parts For Piston Motor Groups In The Circle Drive{5058}
1984/11/19
Hydraulic Motor And Lines Changed For Circle Drive{5050,5200}
1977/04/11
New Drawbar Groups Have Changes To Circle Shoes{6153,6154,6155,6171}
1977/09/12
Correct Adjustment And Lubrication Will Improve Circle Component Life {5207,6154}
1987/08/03
Procedure To Test And Adjust Circle Drive Slip Clutch{5207}
1987/08/10
Back-Up Rings Added To Circle Drive Gerotor Motor Groups{5082}
1987/10/12
Back-Up Rings Made Of Harder Material Are Available For Use In Circle Drive Gerotor Motor Groups {5082}
1988/05/02
New Circle Drive Pinions Have Longer Service Life {5207}
1988/09/26
New Circle Drive Gerotor Motor Groups Provide Higher Torque To Circle Drive {5082}
1988/12/19
Circle Segments Are Now Available To Make Repairs To Circles That Have Cracked Or Broken Teeth{6154}
1979/02/05
New Seal Ring Used In Gerotor Motor Group For Circle Drive{5050,5200}
1979/04/02
More Information About Use Of Shims With New One-Piece Wear Strips In Circle Groups For Hydraulic Sideshift Moldboards{6154,6151}
1979/07/02
Items To Check If Excessive Effort Is Required To Operate Circle Drive Motor{5050,5235}
1989/01/30
Stronger Bracket Assembly Used In Circle Groups{6150,6154}
1989/09/18
Circle Repair Segments Available{6152,6154}
1990/04/16
Circle Drives Now Use Gear Oil{5207,5200,0645,7555,7561}
1992/03/02
Side Shift Cylinder Guard Group Bracket Has Been Improved To Prevent Being Bent {6154}
1993/06/14
Replaceable Sleeve Bearings Can Be Installed In The Circle Assembly And Moldboard Rail Brackets {6154,6157}
1994/02/21
6G-2943 Circle Assembly Can Be Reinforced To Improve Service Life In Severe Applications {6154,6157}
1994/02/28
Circle Drive Unit Cover Can Be Modified To Prevent Oil Loss Through The Vent{5201,5209}
1994/03/07
New Splined Circle Drive Group Provides Improved Performance {5207}
1995/04/10
Ground Body Bolts And Locknuts Improve Retention Of The Aluminum Gear In The Circle Drive Groups {5207}
1995/09/11
Supplement For Special Instruction, &quot;Installation Of Circle Repair Segments&quot;{6154,6152}
1998/07/06
Correction to the Service Magazine , "Replaceable Sleeve Bearings Can Be Installed In The Circle Assembly And Moldboard Rail Brackets" {6154, 6157}
2001/08/13
Special Instruction, SEHS7268, "Installation of Circle Repair Segments" Is Now Available {6152, 6154}
2004/05/03
Circle Tooth Profile and the Correct Use of Templates for the Installation of Circle Segments For Certain Motor Graders {6152, 6152}
2012/03/20
Installation of Circle Repair Segments {6152}
2008/03/31
Steel Wear Strips are Available for the Circle Group on Certain Motor Graders {6152, 6154, 6155}
2009/11/16
Steel Wear Strips for the Circle Group May be Modified in Order to Make The Wear Strips Adjustable {6152, 6154, 6155}
2009/11/16

Caterpillar Parts SIS Catalog 130G :

CIRCLE GP
9D-8865 CIRCLE GP
CIRCLE GP
9D-6375 CIRCLE GP
CIRCLE GP
9D-3560 CIRCLE GP
CASE & FRAME GP
8D-3680 CASE & FRAME GP
FRONT FRAME GROUP
8D-7250 FRONT FRAME GROUP
8D-2980 FRONT AXLE GROUP
FRONT AXLE GROUP
8D-2980 FRONT AXLE GROUP
8D-2980 FRONT AXLE GROUP
CIRCLE GP
9D-6505 CIRCLE GP
POWER BLADE AND TIP CIRCLE ASSEMBLY
9D-6427 POWER BLADE AND TIP CIRCLE ASSEMBLY
CIRCLE AND BEAM ASSEMBLY
2G-3978 CIRCLE AND BEAM ASSEMBLY
AIR RESERVOIR TANK GROUP
9D-5050 AIR RESERVOIR TANK GROUP
AIR TANK GROUP
9D-5060 AIR TANK GROUP
VALVE GP
8J-5913 VALVE GP
PISTON MOTOR GROUP
9J-0688 PISTON MOTOR GROUP
MOTOR GP-PISTON
9J-0439 MOTOR GP-PISTON

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.