AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8D7470 CIRCLE DRIVE GROUP--Part 2 of 2 Serial No. 74V1 to 74V359 and 74V368 to 74V536 and 74V544 inclusive 130G


HYDRAULIC SYSTEM
DRIVE GP
LINES GP-HYDRAULIC
CYLINDER GP
LOCK GP
CYLINDER GP
CONTROL GP-CENTERSHIFT LOCK

MOTOR GRADER 130G MOTOR GRADER 74V
 130G MOTOR GRADER 74V00001-00587 (MACHINE) UEG0860S 130G 74V   (1975)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
DRIVE GP-PUMP
7D-9600 DRIVE GP-PUMP
 

#UEG0860S0190
 

8D-7470: DRIVE GP-CIRCLE

8D7470 CIRCLE DRIVE GROUP--Part 2 of 2
Serial No. 74V1 to 74V359 and 74V368 to 74V536 and 74V544 inclusive
c200511 UEG0860S
8D7470 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4719 [4] NUT  
  3B-4508 [4] LOCKWASHER  
2. 8D-9812 [1] HOUSING ASSEM.  
    (Includes)
3. 2D-8154 [4] STUD  
4. 8D-7426 [1] BEARING  
5. 7D-9137 [2] STUD  
6. 2D-8369 [2] STUD  
7. 5F-5434 [1] VENT ASSEM.  
8. 8D-7174 [1] COVER ASSEM.  
    (Includes)
9. 8D-7173 [1] BEARING  
10. 5H-4909 [1] SEAL  
11. 0S-1625 [9] BOLT  
  3K-2889 [9] LOCKNUT  
  2S-5658 [9] WASHER  
12. 8D-5344 [1] GEAR (36 teeth)  
13. 1D-4609 [2] BOLT  
  4F-8135 [2] WASHER  
14. 5K-5288 R [1] SEAL GROUP  
    (Includes)
15. 5K-5129 [2] RING  
16. 8D-7425 [2] WASHER  
17. 8D-7427 [1] SHAFT  
18. 1A-1415 [1] NUT  
  8D-7423 [1] LOCK  
  8D-7424 [1] SPACER  
19. 1K-6870 [4] NUT  
20. 4D-6989 [4] WASHER  
21. 4F-8824 [1] SEAL  
22. 8D-7414 [1] PINION  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0860S0191
 

8D-7470: DRIVE GP-CIRCLE

8D7470 CIRCLE DRIVE GROUP--Part 1 of 2
Serial No. 74V360 to 74V367, 74V537 to 74V543 and 74V545-Up
9J439 Motor parts are shown on Page 123B
c152448 UEG0860S
8D7470 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0439 YC [1] MOTOR GROUP  
    (Separate Illustration)
2. 1B-4038 [2] CUP  
  1B-4046 [2] CONE  
3. 1B-5174 [1] PLUG  
4. 9D-1142 [1] WORM  
5. 5K-8454 [3] BOLT  
6. 3B-4508 [10] LOCKWASHER  
7. 6H-1717 [5] BOLT  
8. 2B-7410 [1] PLUG  
9. 2H-9247 [1] SEAL  
10. 9D-1051 [1] CARRIER  
11. 7D-8933 [3] SHAFT  
12. 7D-9015 [3] BEARING  
13. 7D-8932 [6] WASHER  
14. 7D-8931 [1] WASHER  
15. 1H-8128 [1] SEAL  
16. 7D-8929 [3] GEAR  
17. 7D-9092 [1] HOUSING ASSEM.  
    (Includes)
18. 2D-8806 [2] STUD  
19. 1D-4719 [2] NUT  
20. 7D-8983 [10] SHIM (.005 in. thick)  
  7D-8984 [6] SHIM (.007 in. thick)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0860S0192
 

8D-7470: DRIVE GP-CIRCLE

8D7470 CIRCLE DRIVE GROUP--Part 2 of 2
Serial No. 74V360 to 74V367, 74V537 to 74V543 and 74V545-Up
c152950 UEG0860S
8D7470 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4719 [4] NUT  
  3B-4508 [4] LOCKWASHER  
2. 8D-9812 [1] HOUSING ASSEM.  
    (Includes)
3. 2D-8154 [4] STUD  
4. 8D-7426 [1] BEARING  
5. 7D-9137 [2] STUD  
6. 2D-8369 [2] STUD  
7. 5F-5434 [1] VENT ASSEM.  
8. 8D-7174 [1] COVER ASSEM.  
    (Includes)
9. 8D-7173 [1] BEARING  
10. 5H-4909 [1] SEAL  
11. 0S-1625 [9] BOLT  
  3K-2889 [9] LOCKNUT  
  2S-5658 [9] WASHER  
12. 8D-5344 [1] GEAR (36 teeth)  
13. 1D-4609 [2] BOLT  
  4F-8135 [2] WASHER  
14. 5K-5288 R [1] SEAL GROUP  
    (Includes)
15. 5K-5129 [2] RING  
16. 8D-7425 [2] WASHER  
17. 8D-7427 [1] SHAFT  
18. 1A-1415 [1] NUT  
  8D-7423 [1] LOCK  
  8D-7424 [1] SPACER  
19. 1K-6870 [4] NUT  
20. 4D-6989 [4] WASHER  
21. 4F-8824 [1] SEAL  
22. 8D-7414 [1] PINION  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0860S0193
 

8D-8630: CIRCLE DRIVE MOTOR LINES GROUP

8D8630 CIRCLE DRIVE MOTOR LINES GROUP
Serial No. 74V1 to 74V359 and 74V368 to 74V536 and 74V544 inclusive
8J5913 Valve parts are shown on Page 123
c152450 UEG0860S
8D8630 CIRCLE DRIVE MOTOR LINES GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-4362 C [4] ELBOW  
2. 3K-0360 [15] SEAL  
3. 9D-5968 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 535 cm(210.63 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
4. 030-8188 [4] CONNECTOR  
5. 9D-5964 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 386 cm(151.97 in.)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
6. 0L-1143 [3] BOLT  
7. 3B-4506 [7] LOCKWASHER  
8. 8J-5913 Y [1] CHECK VALVE GROUP  
    (Separate Illustration)
9. 7D-9984 [5] ELBOW  
10. 9D-5864 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 85 cm(33.46 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
11. 8D-5258 [1] BLOCK  
  9S-4191 [1] PLUG  
12. 0T-0573 [2] BOLT  
13. 8D-9501 [1] BLOCK  
14. 1A-5822 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
15. 9D-5965 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 156 cm(61.42 in.)  
  4S-5414 [2] SLEEVE  
  2P-0987 [1] COUPLING ASSEM. (str.)  
  2P-1461 [1] COUPLING ASSEM. (90 degrees)  
16. 9D-1221 [2] CLAMP  
17. 0L-1351 [2] BOLT  
18. 030-7962 [2] ELBOW  
19. 030-8189 [2] CONNECTOR  
  3D-2824 [2] SEAL  
20. 3J-1907 [2] SEAL  
21. 9D-5929 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 81 cm(31.89 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
22. 030-7948 C [1] ELBOW  
23. 9D-5967 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 168 cm(66.14 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (str.)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
24. 9D-5966 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 167 cm(65.75 in.)  
  4S-5414 [2] SLEEVE  
  2P-0987 [1] COUPLING ASSEM. (str.)  
  2P-1461 [1] COUPLING ASSEM. (90 degrees)  
25. 2R-6806 C [1] CONNECTOR  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0860S0194
 

8D-8630: CIRCLE DRIVE MOTOR LINES GROUP

8D8630 CIRCLE DRIVE MOTOR LINES GROUP
Serial No. 74V360 to 74V367, 74V537 to 74V543 and 74V545-Up
8J5913 Valve parts are shown on Page 123
c152451 UEG0860S
8D8630 CIRCLE DRIVE MOTOR LINES GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-4362 [4] ELBOW  
2. 3K-0360 [15] SEAL  
3. 9D-5968 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 535 cm(210.63 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
4. 030-8188 [4] CONNECTOR  
5. 9D-5964 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 386 cm(151.97 in.)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 DEGREES)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
6. 0L-1143 [3] BOLT  
7. 3B-4506 [7] LOCKWASHER  
8. 8J-5913 Y [1] CHECK VALVE GROUP  
    (Separate Illustration)
9. 7D-9984 [5] ELBOW  
10. 9D-5864 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 85 cm(33.46 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
11. 8D-5258 [1] BLOCK  
  9S-4191 [1] PLUG  
12. 0T-0573 [2] BOLT  
13. 8D-9501 [1] BLOCK  
14. 1A-5822 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
15. 9D-5965 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 156 cm(61.42 in.)  
  4S-5414 [2] SLEEVE  
  2P-0987 [1] COUPLING ASSEM. (str.)  
  2P-1461 [1] COUPLING ASSEM. (90 DEGREES)  
16. 9D-1221 [2] CLAMP  
17. 0L-1351 [2] BOLT  
18. 030-7962 [2] ELBOW  
19. 030-8189 [2] CONNECTOR  
  3D-2824 [2] SEAL  
20. 3J-1907 [2] SEAL  
21. 9D-5929 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 81 cm(31.89 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
22. 030-7948 C [1] ELBOW  
23. 9D-5967 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 168 cm(66.14 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (str.)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
24. 9D-5966 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 167 cm(65.75 in.)  
  4S-5414 [2] SLEEVE  
  2P-0987 [1] COUPLING ASSEM. (str.)  
  2P-1461 [1] COUPLING ASSEM. (90 degrees)  
25. 030-7947 C [1] ELBOW  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0860S0195
 

7D-9700: CYLINDER & MOUNTING GP

7D9700 CENTERSHIFT CYLINDER AND MOUNTING GROUP
8J6367 Cylinder parts are shown on Page 128
c207390 UEG0860S
7D9700 CYLINDER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4628 C [4] BOLT  
2. 3B-4514 [4] LOCKWASHER  
3. 8J-6367 Y [1] CYLINDER GROUP  
    (Separate Illustration)
4. 9D-3089 [2] CAP  
5. 9D-2754 [4] INSERT  
6. 3B-8485 C [2] FITTING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0860S0196
 

8D-9920: LOCK GP-CENTERSHIFT

8D9920 CENTERSHIFT LOCK GROUP
c207388 UEG0860S
8D9920 LOCK GP-CENTERSHIFT Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9786 [1] PIN  
2. 6D-7889 [2] SEAL-O-RING  
3. 9D-4447 [1] PISTON  
4. 9D-5064 [1] SEAL  
5. 9F-7283 [1] SEAL-O-RING  
6. 9D-4441 [1] HOUSING  
7. 9D-4443 [1] CAP  
8. 2H-9247 [1] SEAL-O-RING  
9. 8D-1777 [2] WASHER-THRUST 1.905MM(.075IN)THK  
  8D-1776 [1] WASHER-THRUST 2.388MM(.094IN)THK  
10. 1D-4753 [1] SPRING  
11. 9D-4442 [1] HOUSING  
12. 7H-3171 [1] PLUG-PIPE  
13. 0S-1571 [2] BOLT  
  0T-0329 [1] LOCK-NUT  
14. 5P-1895 [2] BOLT  
15. 6F-0711 [1] SEAL-O-RING  
16. 8D-1791 [2] SEAL  
17. 3B-4510 [2] LOCKWASHER  
    -OR-
  2S-5658 [2] WASHER-HARD  
 

#UEG0860S0197
 

8J-6367: CENTERSHIFT CYLINDER GROUP

8J6367 CENTERSHIFT CYLINDER GROUP--(Change 2, 3 & 4)--3.25" Bore x 18.08" Stroke
Part of Centershift Cylinder and Mounting shown on Page 127
c200099 UEG0860S
8J6367 CENTERSHIFT CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 8J-6368 [1] CYLINDER ASSEM.  
3. 1H-7339 [1] SEAL  
4. 8J-2574 [1] RING  
5. 8J-5912 [1] SCREW  
6. 8J-6378 [1] ROD ASSEM.  
7. 1K-6981 [1] SEAL  
8. 8J-6377 [1] CROWN  
9. 5J-8200 [1] SEAL  
10. 6J-6917 [1] SEAL  
11. 8J-6375 [1] HEAD  
12. 6J-0793 [1] SEAL ASSEM.  
13. 8J-6371 [1] RING  
14. 8J-6370 [1] PISTON  
15. 8J-7415 [1] WASHER  
 

#UEG0860S0198
 

8D-5190: CONTROL GP-CENTERSHIFT

8D5190 CENTERSHIFT LOCK CONTROL GROUP
Serial No. 74V1 to 74V479 inclusive
8D7306 Valve parts are shown on Page 130
c154208 UEG0860S
8D5190 CONTROL GP-CENTERSHIFT Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-7306 Y [1] VALVE GROUP  
    (Separate Illustration)
2. 5M-6214 [1] PLUG  
3. 3B-8822 [3] ELBOW  
4. 5H-4778 [3] UNION  
5. 7D-6095 [2] HOSE ASSEM. 209 in. (53.09 dm)  
6. 5K-8451 [4] CLIP  
7. 0S-0509 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
8. 4B-1232 [1] SCREW  
9. 4S-7560 [1] HOSE ASSEM. 22 in. (5.59 dm)  
10. 4D-2560 [3] UNION  
11. 9F-9831 C [3] WASHER  
12. 2G-1535 [1] BASE  
13. 4B-1227 [1] SCREW  
14. 2G-1536 [1] SPRING  
15. 2G-1537 [1] BRACKET  
16. 4B-8626 [1] SCREW  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0860S0199
 

8D-5190: CONTROL GP-CENTERSHIFT

8D5190 CENTERSHIFT LOCK CONTROL GROUP
Serial No. 74V480-Up
8D7306 Valve parts are shown on Page 130
c154209 UEG0860S
8D5190 CONTROL GP-CENTERSHIFT Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-7306 Y [1] VALVE GROUP  
    (Separate Illustration)
2. 5M-6214 [1] PLUG  
3. 3B-8822 [3] ELBOW  
4. 5H-4778 C [2] UNION  
5. 7D-6095 [2] HOSE ASSEM. 209 in.(53.09 dm)  
6. 5K-8451 [4] CLIP  
7. 0S-0509 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
8. 4B-1232 [1] SCREW  
9. 4S-7560 [1] HOSE ASSEM. 22 in.(5.59 dm)  
10. 4D-2560 [3] UNION  
11. 9F-9831 [3] WASHER  
12. 2G-1535 [1] BASE  
13. 4B-1227 [1] SCREW  
14. 2G-1536 [1] SPRING  
15. 2G-1537 [1] BRACKET  
16. 4B-8626 [1] SCREW  
17. 9D-4210 C [1] WIRE ASSEM.  
    (Includes)
  5P-0497 H WIRE (16 gauge) 2 dm(8 in.)  
  8M-0537 [1] TERMINAL (.375 in. screw)  
  4L-3916 [1] TERMINAL  
18. 2J-4211 C [1] UNION  
19. 3B-7738 C [1] NIPPLE  
20. 7J-8611 C [1] ELBOW  
21. 9D-9685 C [1] WIRE ASSEM.  
    (Includes)
  5P-0497 H WIRE 16 gauge 3.05 dm(12 in.)  
  2L-8076 [1] TERMINAL (no 10 screw)  
  4L-3916 [1] TERMINAL  
22. 6D-8981 C [1] VALVE ASSEM.  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE DECIMETRE
 

Information:

Special Instruction
Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207}
Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207}
Specifications
Drive For Hydraulic Pump
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Pump Drive
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Circle Drive Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Circle Drive With Slip Clutch Group (Attachment)<BR> (5T0570 - 12G, 120G, 130G, 140G)
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Reuse And Salvage Guidelines
Motor Grader Circle Pinion Reuse {5207}
Motor Grader Circle Pinion Reuse {5207}
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Disassembly and Assembly
Pump Group Drive Shaft
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Circle Drive Motor
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Pump Drive
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive And Blade Sideshift Lock Check Valves
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive Motor (Earlier)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive Motor (Later)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive (Earlier)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive (Later)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Pump Drive
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Pump Group Drive Shaft
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Service Magazine
Slip Clutches Now Available On Circle Drive Group{5058,5237,5207,6154}
1981/02/09
Less Oil Used In Circle Drive Group To Prevent Leakage Through Vent Assembly{5207}
1984/01/30
Lubrication Of Circle Drive Pinion And Wear Strips; Wear Strip Clearance Adjustment{5207,6155}
1984/11/05
Order The Correct Replacement Parts For Piston Motor Groups In The Circle Drive{5058}
1984/11/19
Hydraulic Motor And Lines Changed For Circle Drive{5050,5200}
1977/04/11
Correct Adjustment And Lubrication Will Improve Circle Component Life {5207,6154}
1987/08/03
Procedure To Test And Adjust Circle Drive Slip Clutch{5207}
1987/08/10
Back-Up Rings Added To Circle Drive Gerotor Motor Groups{5082}
1987/10/12
Back-Up Rings Made Of Harder Material Are Available For Use In Circle Drive Gerotor Motor Groups {5082}
1988/05/02
New Circle Drive Pinions Have Longer Service Life {5207}
1988/09/26
New Circle Drive Gerotor Motor Groups Provide Higher Torque To Circle Drive {5082}
1988/12/19
New Seal Ring Used In Gerotor Motor Group For Circle Drive{5050,5200}
1979/04/02
Items To Check If Excessive Effort Is Required To Operate Circle Drive Motor{5050,5235}
1989/01/30
Corrections to Disassembly and Assembly Module For 12G, 120G, 130G, 140G Motor Graders Vehicle Systems, SENR3650 {5058}
1990/07/02
Circle Drives Now Use Gear Oil{5207,5200,0645,7555,7561}
1992/03/02
Circle Drive Unit Cover Can Be Modified To Prevent Oil Loss Through The Vent{5201,5209}
1994/03/07
New Splined Circle Drive Group Provides Improved Performance {5207}
1995/04/10
Ground Body Bolts And Locknuts Improve Retention Of The Aluminum Gear In The Circle Drive Groups {5207}
1995/09/11
Correction to Service Magazine , "Circle Drive can be Modified to Improve Performance" {5207}
2001/12/03
Procedure To Test the Slip Clutch for the Circle Drive {5082, 5207, 5209}
2004/08/16
Circle Worm Drive Has Been Improved on Certain Motor Graders {5207}
2014/01/29
An Improved Pinion Shaft with a New Rugged Bolted Joint Provides Consistent Torque on the Circle Drive {5207}
2008/05/12
The Disassembly and Assembly Manual for Worm Gear Bearing Preload Setting has been Updated on Certain Motor Graders {5207}
2015/01/16
A New Shaft With New Pinion In The Circle Drive Group Is Now Used On Certain Motor Graders {5207}
2015/07/30

Caterpillar Parts SIS Catalog 130G :

DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
MOTOR GP-PISTON
9J-0439 MOTOR GP-PISTON
PISTON MOTOR GROUP
9J-0688 PISTON MOTOR GROUP
VALVE GP
8J-5913 VALVE GP
AIR TANK GROUP
9D-5060 AIR TANK GROUP
AIR RESERVOIR TANK GROUP
9D-5050 AIR RESERVOIR TANK GROUP
CIRCLE AND BEAM ASSEMBLY
2G-3978 CIRCLE AND BEAM ASSEMBLY
POWER BLADE AND TIP CIRCLE ASSEMBLY
9D-6427 POWER BLADE AND TIP CIRCLE ASSEMBLY
DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
CIRCLE DRIVE MOTOR LINES GROUP
8D-8630 CIRCLE DRIVE MOTOR LINES GROUP
CIRCLE DRIVE MOTOR LINES GROUP
8D-8630 CIRCLE DRIVE MOTOR LINES GROUP
CYLINDER & MOUNTING GP
7D-9700 CYLINDER & MOUNTING GP
LOCK GP-CENTERSHIFT
8D-9920 LOCK GP-CENTERSHIFT
CENTERSHIFT CYLINDER GROUP
8J-6367 CENTERSHIFT CYLINDER GROUP
CONTROL GP-CENTERSHIFT
8D-5190 CONTROL GP-CENTERSHIFT

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.