AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J6380 BLADE LIFT CYLINDER GROUP (Changes 2,3)--3.25" Bore X 40.00" Stroke Part of 8D7950 Blade Lift Cylinder and Mounting Group shown on Page 136 130G


HYDRAULIC SYSTEM
CYLINDER GP
SWIVEL GP
CYLINDER GP
LINES GP-HYDRAULIC
LINES GP-SIDESHIFT
CYLINDER GP
LINES GP-HYDRAULIC

MOTOR GRADER 130G MOTOR GRADER 74V
 130G MOTOR GRADER 74V00001-00587 (MACHINE) UEG0860S 130G 74V   (1975)

HYDRAULIC SYSTEM

CYLINDER GP
BLADE SIDE SHIFT CYLINDER AND MOUNTING GROUP
7D-9945 BLADE SIDE SHIFT CYLINDER AND MOUNTING GROUP
CYLINDER & MOUNTING GP
9D-9830 CYLINDER & MOUNTING GP
BLADE LIFT CYLINDER GROUP
8J-6380 BLADE LIFT CYLINDER GROUP
CYLINDER GP-BLADE SIDE SHIFT
8J-0028 CYLINDER GP-BLADE SIDE SHIFT
TIP MOUNTING AND CYLINDER GROUP
9D-6670 TIP MOUNTING AND CYLINDER GROUP
CYLINDER & MOUNTING GP
7D-9955 CYLINDER & MOUNTING GP
 

#UEG0860S0210
 

8J-6380: BLADE LIFT CYLINDER GROUP

8J6380 BLADE LIFT CYLINDER GROUP (Changes 2,3)--3.25" Bore X 40.00" Stroke
Part of 8D7950 Blade Lift Cylinder and Mounting Group shown on Page 136
c200421 UEG0860S
8J6380 BLADE LIFT CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 8J-7415 [1] WASHER  
3. 8J-6371 [1] RING  
4. 6J-0793 [1] SEAL ASSEM.  
5. 8J-6370 [1] PISTON  
6. 8J-6381 R [1] CYLINDER ASSEM.  
7. 8J-6384 [2] BEARING  
8. 1H-7339 [1] SEAL  
9. 8J-2574 [1] RING  
10. 8J-6375 [1] HEAD  
11. 6J-6917 [1] SEAL  
12. 5J-8200 [1] SEAL  
13. 8J-5912 [1] SCREW  
14. 1K-6981 [1] SEAL  
15. 8J-6666 [1] ROD ASSEM.  
16. 8J-6377 [1] CROWN  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0860S0211
 

8J-0028: CYLINDER GP-BLADE SIDE SHIFT

8J28 BLADE SIDE SHIFT CYLINDER GROUP (Change 2)--3.00" Bore x 47.00" Stroke
Part of Blade Side Shift Cylinder and Mounting shown on Page 136
c200097 UEG0860S
8J0028 CYLINDER GP-BLADE SIDE SHIFT Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 6J-5733 [1] RING  
3. 6J-1972 [1] SEAL ASSEM.  
4. 6J-9178 [1] SEAL  
5. 8J-5912 [1] SCREW  
6. 8J-5911 [1] CROWN  
7. 8J-6681 R [1] ROD ASSEM.  
8. 4J-8980 [1] SEAL  
9. 5J-8175 [1] SEAL  
10. 7J-3351 [1] HEAD  
11. 6J-5731 [1] RING  
12. 5H-8848 [1] SEAL  
13. 8J-0027 R [1] CYLINDER ASSEM.  
    (Includes)
14. 6J-0499 [2] LUG  
15. 7J-5682 [1] PISTON  
16. 3K-5234 [1] WASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0860S0212
 

8J-4568: SWIVEL JOINT GP

8J4568 SWIVEL JOINT GROUP
Part of 9D6420 Blade Shift Lines Group shown on Page 140
c202423 UEG0860S
8J4568 SWIVEL JOINT GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-4564 [1] RETAINER  
2. 4K-1493 [2] SCREW  
3. 8J-5512 [6] SHIM  
4. 8J-4562 [2] SEAL  
5. 8J-4561 [2] SEAL  
6. 8J-5863 [5] SEAL ASSEM.  
7. 8J-4567 [1] BODY  
8. 8J-4566 [1] ROTOR  
9. 9S-4185 [2] PLUG  
  3K-0360 [2] SEAL  
 

#UEG0860S0213
 

9D-6670: TIP MOUNTING AND CYLINDER GROUP

9D6670 TIP MOUNTING AND CYLINDER GROUP
Replaced by 7D9955 shown on Page 139A. Part of 9D6470 and 9D6475 Power
Blade and Tip Arrangement listed on Page 229. 9J3466 Cylinder parts are shown on Page 141
c202219 UEG0860S
9D6670 TIP MOUNTING AND CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-3466 Y [1] CYLINDER GROUP  
    (Separate Illustration)
2. 8D-6687 [1] PIN  
3. 5K-5552 [1] BOLT  
4. 5F-4258 [2] SEAL  
5. 3B-5329 [1] COTTER PIN  
6. 030-1927 [2] SEAL  
7. 8D-7678 [1] PIN  
  Y   SEPARATE ILLUSTRATION
 

#UEG0860S0214
 

7D-9955: CYLINDER & MOUNTING GP

7D9955 MOUNTING AND BLADE TIP CYLINDER GROUP
Part of 9D6470 and 9D6475 Blade and Tip Arrangements listed on Page 229
9J3466 Cylinder parts are shown on Page 141. AN ATTACHMENT
c159028 UEG0860S
7D9955 CYLINDER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-3466 CY [1] CYLINDER GROUP  
    (Separate Illustration)
2. 8D-6687 [1] PIN  
3. 5K-5552 [1] BOLT  
4. 5F-4258 [2] SEAL  
5. 3B-5329 [1] COTTER PIN  
6. 030-1927 [2] SEAL  
7. 8D-7678 [1] PIN  
8. 2G-3967 C [2] SPACER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0860S0215
 

2G-3420: LINES GP-HYDRAULIC

2G3420 BLADE SHIFT LINES GROUP--1 Circuit
Part of 9D6450 and 9D6395 Power Blade Arrangements listed on Page 229
8J5913 Valve and 8J4568 Swivel parts are shown on Pages 123 & 139
c159029 UEG0860S
2G3420 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 369 cm(145.3 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [2] BOLT  
3. 5P-1075 [5] LOCKWASHER  
4. 1D-4717 [2] NUT  
5. 9D-6068 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 127 cm(50 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [12] SEAL  
8. 7D-9984 [2] ELBOW  
9. 7K-1181 [1] STRAP  
10. 2G-2558 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 249 cm(98 in.)  
  8S-4055 [2] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
11. 9D-5980 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 148 cm(58.20 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
12. 0L-1143 [3] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-4568 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4628 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 5H-1625 [1] CLAMP  
22. 1S-0994 [2] CLIP  
23. 0S-1585 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  031-5183 [1] SPACER  
24. 2G-2561 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 279 cm(109.9 in.)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
 

#UEG0860S0216
 

9D-6420: BLADE SHIFT LINES GROUP

9D6420 BLADE SHIFT LINES GROUP
Replaced by 2G3420 shown on Page 139B
Part of 9D6395 and 9D6450 Power Blade Arrangements listed on Page 229
8J5913 Valve and 8J4568 Swivel parts are shown on Pages 123 and 139
c202421 UEG0860S
9D6420 BLADE SHIFT LINES GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 369 cm(145.3 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [2] BOLT  
3. 3B-4506 [5] LOCKWASHER  
4. 1D-4717 [2] NUT  
5. 9D-5983 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 136 cm(53.5 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [16] SEAL  
8. 7D-9984 [6] ELBOW  
9. 7K-1181 [1] STRAP  
10. 9D-5980 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 148 cm(57.2 in.)  
  8S-4055 [2] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
11. 9D-5864 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 85 cm(33.4 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [2] COUPLING ASSEM.  
12. 0L-1143 [3] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-4568 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4629 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 5H-1625 [1] CLAMP  
22. 1S-0994 [2] CLIP  
23. 0S-1585 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  031-5183 [1] SPACER  
24. 9D-5866 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 184 cm(72.44 in.)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
25. 9D-5871 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 141 cm(55.46 in.)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
 

#UEG0860S0217
 

9J-3466: CYLINDER GP-BLADE TIP

9J3466 BLADE TIP CYLINDER GROUP (Changes 0,1)--2.75" Bore x 12.09" Stroke
Part of 9D6670 Tip Mounting and Cylinder Group shown on Page 139
c202220 UEG0860S
9J3466 CYLINDER GP-BLADE TIP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-0112 [1] RING  
2. 9J-3465 R [1] CYLINDER ASSEM.  
3. 2D-8652 [1] BEARING  
  8J-3774 [2] RING  
4. 4J-8979 [1] SEAL  
5. 1H-5728 [1] SEAL  
6. 4J-9225 [1] RING  
7. 8J-0119 [1] HEAD  
8. 8J-0118 [1] CROWN  
9. 8J-6901 R [1] ROD ASSEM.  
10. 2D-8652 [1] BEARING  
  8J-3774 [2] RING  
11. 8J-5912 [1] SCREW  
12. 5J-8150 [1] SEAL  
13. 7J-5639 [1] BOLT  
14. 6J-9733 [1] SEAL  
15. 5J-7010 [1] SEAL ASSEM.  
16. 8J-0113 [1] PISTON  
17. 8J-7415 [1] WASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0860S0218
 

8D-8640: HYDRAULIC POWER BLADE LINES

8D8640 HYDRAULIC POWER BLADE LINES--1 Circuit
Replaced by 2G3450 shown on Page 142A
Part of 9D6470 and 9D6475 Power Blade and Tip Arrangements listed on Page 229
8J5913 Valve and 8J384 Swivel parts are shown on Pages 123 and 145
c208783 UEG0860S
8D8640 HYDRAULIC POWER BLADE LINES Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM.  
    For service of each furnish:
  5P-0178 H HOSE 369 cm(145.3 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [4] BOLT  
3. 3B-4506 [7] LOCKWASHER  
4. 1D-4717 [4] NUT  
5. 9D-5983 [2] HOSE ASSEM.  
    For service of each furnish:
  5P-0178 H HOSE 136 cm(53.5 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [16] SEAL  
8. 7D-9984 [6] ELBOW  
10. 9D-5980 [2] HOSE ASSEM.  
    For service of each furnish:
  5P-0178 H HOSE 148 cm(57.2 in.)  
  8S-6417 C [2] COUPLING ASSEM.  
  4S-5414 C [2] SLEEVE  
11. 9D-5864 [2] HOSE ASSEM.  
    For service of each furnish:
  5P-0178 H HOSE 85 cm(33.4 in.)  
  4S-5414 C [2] SLEEVE  
  8S-6417 C [2] COUPLING ASSEM.  
12. 0L-1143 [3] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-0384 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4629 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 3K-8320 [2] CLAMP  
22. 1S-0994 [2] CLIP  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0860S0219
 

2G-3450: LINES GP-HYDRAULIC

2G3450 HYDRAULIC POWER BLADE LINES GROUP--1 Circuit
Part of 9D6470 and 9D6475 Power Blade and Tip Arrangements listed on Page 229
8J5913 Valve and 8J384 Swivel parts are shown on Pages 123 and 144
AN ATTACHMENT
c159027 UEG0860S
2G3450 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 369 cm(145.3 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [4] BOLT  
3. 5P-1075 [7] WASHER  
4. 1D-4717 [4] NUT  
5. 9D-6068 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 127 cm(50 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [12] SEAL  
8. 7D-9984 [2] ELBOW  
9. 1S-0994 [2] CLIP  
10. 9D-5980 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 148 cm(57.2 in.)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
11. 2G-2558 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 249 cm(98.04 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
12. 0L-1143 [3] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-0384 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4628 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 3K-8320 [2] CLAMP  
22. 2G-2557 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 243 cm(95.7 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Installation Of Improved Steering Cylinders, Sockets And Crossover Relief Valves On Motor Graders{4303}
Installation Of Improved Steering Cylinders, Sockets And Crossover Relief Valves On Motor Graders{4303}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Mounting For Articulation Cylinder
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Cylinder Groups
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Cylinder Mounting
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Steering Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Wheel Lean Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Ball And Socket Joint Inserts
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Sideshift Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Centershift Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Tip Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Articulation Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Hydraulic Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Steering Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Wheel Lean Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Ball And Socket Joint Inserts
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Sideshift Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Tip Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Articulation Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Hydraulic Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Service Magazine
Valve Assembly Used In Centershift Lock Control Group To Prevent Accidental Rotation And Lowering Of Blade{5220,5221,5223,6151}
1980/10/20
Valve Assembly And Nipple Moved From Centershift Lock Control Group To Brake Control Group To Prevent Unauthorized Operation{4282,4267,5220,5221,5223,6151}
1980/11/10
Correct Position Of Shims In Blade Lift And Centershift Cylinder Groups{5102,5223}
1982/04/12
New Pin For Moldboard Shift Cylinder Prevents Loss During Operation{5229}
1984/06/04
Improved Charging Valve For Accumulators And Suspension Cylinders{7107,7201}
1985/06/17
Centershift Extension Groups: A Better Method To Cut A Bank Slope At A 2:1 Ratio{5229,6151}
1977/04/11
Washers Added To Articulation Cylinders Minimize Damage To Cylinder Crowns{7058,4303}
1987/05/25
New Back-up Rings For Hydraulic Cylinders{5200,5100}
1988/03/28
New Hydraulic Cylinder Washers Keep Piston Retaining Bolts Tighter{5200,5213,5223,5229,6150}
1988/05/16
New Articulation And Scarifier Cylinders Have Larger Piston Retaining Bolts{5213,7058}
1988/10/24
New Blade Lift And Centershift Cylinders Have Caps With Shims For Adjustment{5102,5223}
1979/03/12
Adjustment Procedure For Blade Lift Cylinders And Centershift Cylinders{5223,5102}
1979/03/26
Steering System Improvements Prevent Possible Damage To Steering Cylinder Sockets{4303,4304,4305,4322}
1979/08/27
Adjustable Wear Strip Kit Available For Blade Cylinder Tip Bracket {5254,5230}
1989/05/08
Hydraulic Cylinder Drift On All Caterpillar Series G Motor Graders{5050,6150,7562}
1990/04/02
New Articulation Cylinders Which Prevent Piston Bolt Loosening{5265}
1991/12/02
Improved Performance For The Thirteenth Valve{5106,5140,5212}
1992/05/25
Side Shift Cylinder Guard Group Bracket Has Been Improved To Prevent Being Bent {6154}
1993/06/14
New Side Shift Cylinder Group Used With Higher Torque On Piston Retaining Bolt{5229}
1993/07/12
Lock Valve Group With A Relief For Right Blade Lift Cylinder Is Available On Motor Graders{5102,5100}
1994/02/07
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
Snap Ring Improves Rod Wiper Seal Retention {4303,5101,5102,5104,5213}
1999/07/12
Correction to Specifications, SENR3488 {5265}
2000/02/21
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Cat<SUP>&reg;</SUP> Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/06/05

Caterpillar Parts SIS Catalog 130G :

CYLINDER & MOUNTING GP
9D-9830 CYLINDER & MOUNTING GP
BLADE SIDE SHIFT CYLINDER AND MOUNTING GROUP
7D-9945 BLADE SIDE SHIFT CYLINDER AND MOUNTING GROUP
CYLINDER & MOUNTING GP
8D-7950 CYLINDER & MOUNTING GP
8D-5285 LIFT GP-BLADE
LIFT GP-BLADE
8D-5285 LIFT GP-BLADE
CHECK & RELIEF VALVE GP
8J-9975 CHECK & RELIEF VALVE GP
LINES GP-LIFT CYLINDER
8D-2820 LINES GP-LIFT CYLINDER
HYDRAULIC CENTERSHIFT LINES
8D-9530 HYDRAULIC CENTERSHIFT LINES
CYLINDER GP-BLADE SIDE SHIFT
8J-0028 CYLINDER GP-BLADE SIDE SHIFT
SWIVEL JOINT GP
8J-4568 SWIVEL JOINT GP
TIP MOUNTING AND CYLINDER GROUP
9D-6670 TIP MOUNTING AND CYLINDER GROUP
CYLINDER & MOUNTING GP
7D-9955 CYLINDER & MOUNTING GP
LINES GP-HYDRAULIC
2G-3420 LINES GP-HYDRAULIC
BLADE SHIFT LINES GROUP
9D-6420 BLADE SHIFT LINES GROUP
CYLINDER GP-BLADE TIP
9J-3466 CYLINDER GP-BLADE TIP
HYDRAULIC POWER BLADE LINES
8D-8640 HYDRAULIC POWER BLADE LINES

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.