AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D343 ENGINE 62B06728-UP BASIC ENGINE Caterpillar SIS



INDUSTRIAL ENGINE D343 INDUSTRIAL ENGINE 62B
 D343 ENGINE 62B06728-UP UEG0873S D343 62B   (1960)

Parts group D343:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT DRIVE GROUP
7S-3586 CAMSHAFT DRIVE GROUP
7S3586 CAMSHAFT DRIVE GROUP
Only separate parts serviced
CAMSHAFT GP
9S-0737 CAMSHAFT GP
9S737 CAMSHAFT GROUP
Serial No. 62B6728 to 62B8616 inclusive
Only separate parts serviced
CAMSHAFT GP
9S-0737 CAMSHAFT GP
9S737 CAMSHAFT GROUP
Serial No. 62B8617-Up
Only separate parts serviced
CLUTCH GP
ENCLOSED CLUTCH GROUP
7L-5028 ENCLOSED CLUTCH GROUP
7L5028 ENCLOSED CLUTCH GROUP--Rear--Type 1
AN ATTACHMENT
ENCLOSED CLUTCH GROUP
7L-5028 ENCLOSED CLUTCH GROUP
7L5028 ENCLOSED CLUTCH GROUP--Rear--Type 2
2N6967 Flywheel Clutch parts are shown on Page 374
AN ATTACHMENT
FLYWHEEL CLUTCH ASSEMBLY
6L-8509 FLYWHEEL CLUTCH ASSEMBLY
6L8509 FLYWHEEL CLUTCH ASSEMBLY
Specification No. 31322
Part of 7L5028 Enclosed Clutch Group
FLYWHEEL CLUTCH ASSEMBLY
2N-6967 FLYWHEEL CLUTCH ASSEMBLY
2N6967 FLYWHEEL CLUTCH ASSEMBLY
Specification No. 33596
Part of 7L5028 Enclosed Clutch Group shown on Page 372
TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
2N-2806 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
2N2806 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP--Part 1 of 2--Type 1
Serial No. 62B6728 to 62B10703 inclusive
3L4022 Governor parts are shown on Pages 388 and 389
AN ATTACHMENT
TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
2N-2806 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
2N2806 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP--Part 2 of 2--Type 1
Serial No. 62B6728 to 62B10703 inclusive
AN ATTACHMENT
TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
2N-2806 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
2N2806 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP--Part 1 of 2--Type 2
Serial No. 62B6728 to 62B10703 inclusive
3L4022 Governor parts are shown on Pages 388 and 389
AN ATTACHMENT
TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
2N-2806 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
2N2806 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP--Part 2 of 2--Type 2
Serial No. 62B6728 to 62B10703 inclusive
AN ATTACHMENT
TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
2N-2806 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
2N2806 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP--Part 1 of 2--Type 3
Serial No. 62B6728 to 62B10703 inclusive
3L4022 Governor parts are shown on Pages 388 and 389
AN ATTACHMENT
TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
2N-2806 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
2N2806 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP--Part 2 of 2--Type 3
Serial No. 62B6728 to 62B10703 inclusive
AN ATTACHMENT
TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
3N-7414 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
3N7414 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP--Part 1 of 2--Type 1
Serial No. 62B10704-Up
3L4022 Governor parts are shown on Pages 388 and 389
AN ATTACHMENT
TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
3N-7414 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
3N7414 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP--Part 2 of 2--Type 1
Serial No. 62B10704-Up
AN ATTACHMENT
TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
3N-7414 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
3N7414 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP--Part 1 of 2--Type 2
Serial No. 62B10704-Up
3L4022 Governor parts are shown on Pages 388 and 389
AN ATTACHMENT
TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
3N-7414 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP
3N7414 TORQUE CONVERTER OUTPUT SHAFT GOVERNOR GROUP--Part 2 of 2--Type 2
Serial No. 62B10704-Up
AN ATTACHMENT
GOVERNOR AS-RH
3L-4022 GOVERNOR AS-RH
3L4022 GOVERNOR ASSEMBLY--Type 1
Part of 2N2806 and 3N7414 Governor Groups shown on Pages 378, 380, 382, 384 and 386
GOVERNOR AS-RH
3L-4022 GOVERNOR AS-RH
3L4022 GOVERNOR ASSEMBLY--Type 2
Part of 2N2806 and 3N7414 Governor Groups shown on Pages 378, 380, 382, 384 and 386
COUPLING GP
GENERATOR DRIVE COUPLING GROUP
3N-8236 GENERATOR DRIVE COUPLING GROUP
3N8236 GENERATOR DRIVE COUPLING GROUP
Part of 3N8237 Generator Installation Arrangement listed on Page 300
GENERATOR DRIVE COUPLING GROUP
5L-6099 GENERATOR DRIVE COUPLING GROUP
5L6099 GENERATOR DRIVE COUPLING GROUP--Type 1
Part of 4L7004, 3N1700, 3N3456 and 3N7353 Generator Installation
Arrangements listed on Pages 298, 299 and 300
GENERATOR DRIVE COUPLING GROUP
5L-6099 GENERATOR DRIVE COUPLING GROUP
5L6099 GENERATOR DRIVE COUPLING GROUP--Type 2
Part of 4L7004, 3N1700, 3N3456 and 3N7353 Generator Installation
Arrangements listed on Pages 298, 299 and 300
CRANKSHAFT GP
CRANKSHAFT GROUP
3N-8340 CRANKSHAFT GROUP
3N830 CRANKSHAFT GROUP
Serial No. 62B6728 to 62B18486 inclusive
CRANKSHAFT GROUP
3N-8340 CRANKSHAFT GROUP
3N8340 CRANKSHAFT GROUP
Serial No. 62B18487-Up
CRANKSHAFT GROUP
2N-7992 CRANKSHAFT GROUP
2N7992 CRANKSHAFT GROUP--Type 1
Serial No. 62B6728 to 62B18486 inclusive
CRANKSHAFT GROUP
2N-7992 CRANKSHAFT GROUP
2N7992 CRANKSHAFT GROUP--Type 2
Serial No. 62B6728 to 62B18486 inclusive
CRANKSHAFT GROUP
2N-7992 CRANKSHAFT GROUP
2N7992 CRANKSHAFT GROUP
Serial No. 62B18487-Up
7N-0142 CRANKSHAFT SEAL GROUP
7N142 CRANKSHAFT SEAL GROUP--Front
Serial No. 62B6728 to 62B18486 inclusive. Note: Provides Field Replacement
for 2S1509 Seal shown on Pages 56, 57, 58, 58B, 60 & 61
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS GROUP
1N-5512 CYLINDER BLOCK AND COVERS GROUP
1N5512 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 1 of 2
Serial No. 62B6728 to 62B7782 inclusive
Cylinder Block parts are shown on Page 54. Only separate parts serviced
CYLINDER BLOCK AND COVERS GROUP
1N-5512 CYLINDER BLOCK AND COVERS GROUP
1N5512 CYLINDER BLOCK AND COVERS GROUP--End View--Part 2 of 2
Serial No. 62B6728 to 62B7782 inclusive
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER BLOCK AND COVERS GROUP
1N-5512 CYLINDER BLOCK AND COVERS GROUP
1N5512 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 1 of 2
Serial No. 62B7783 to 62B9122 inclusive
Cylinder Block parts are shown on Pages 54 and 55. Only separate parts serviced
CYLINDER BLOCK AND COVERS GROUP
1N-5512 CYLINDER BLOCK AND COVERS GROUP
1N5512 CYLINDER BLOCK AND COVERS GROUP--End View--Part 2 of 2
Serial No. 62B7783 to 62B9122 inclusive
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER BLOCK AND COVERS GROUP
1N-5512 CYLINDER BLOCK AND COVERS GROUP
1N5512 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 1 of 2
Serial No. 62B9123-Up
Cylinder Block parts are shown on Page 55. Only separate parts serviced
CYLINDER BLOCK AND COVERS GROUP
1N-5512 CYLINDER BLOCK AND COVERS GROUP
1N5512 CYLINDER BLOCK AND COVERS GROUP--End View--Part 2 of 2
Serial No. 62B9123-Up
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER BLOCK AND COVERS GROUP
1N-7500 CYLINDER BLOCK AND COVERS GROUP
1N7500 CYLINDER BLOCK AND COVERS GROUP--Side View--Type 1--Part 1 of 2
Cylinder Block parts are shown on Pages 54 and 55
Only separate parts serviced
CYLINDER BLOCK AND COVERS GROUP
1N-7500 CYLINDER BLOCK AND COVERS GROUP
1N7500 CYLINDER BLOCK AND COVERS GROUP--End View--Type 1--Part 2 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER BLOCK AND COVERS GROUP
1N-7500 CYLINDER BLOCK AND COVERS GROUP
1N7500 CYLINDER BLOCK AND COVERS GROUP--Side View--Type 2--Part 1 of 2
Cylinder Block parts are shown on Pages 54 and 55
Only separate parts serviced
CYLINDER BLOCK AND COVERS GROUP
1N-7500 CYLINDER BLOCK AND COVERS GROUP
1N7500 CYLINDER BLOCK AND COVERS GROUP--End View--Type 2--Part 2 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER BLOCK AND COVERS GROUP
1N-7500 CYLINDER BLOCK AND COVERS GROUP
1N7500 CYLINDER BLOCK AND COVERS GROUP--Side View--Type 3--Part 1 of 2
Cylinder Block parts are shown on Pages 54 and 55
Only separate parts serviced
CYLINDER BLOCK AND COVERS GROUP
1N-7500 CYLINDER BLOCK AND COVERS GROUP
1N7500 CYLINDER BLOCK AND COVERS GROUP--End View--Type 3-Part 2 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER BLOCK AND COVERS GROUP
2N-7985 CYLINDER BLOCK AND COVERS GROUP
2N7985 CYLINDER BLOCK AND COVERS GROUP--Side View-Part 1 of 2
Cylinder Block parts are shown on Pages 54 and 55
Only separate parts serviced
CYLINDER BLOCK AND COVERS GROUP
2N-7985 CYLINDER BLOCK AND COVERS GROUP
2N7985 CYLINDER BLOCK AND COVERS GROUP--End View - Part 2 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER BLOCK AND COVERS GROUP
6N-6752 CYLINDER BLOCK AND COVERS GROUP
6N6752 CYLINDER BLOCK AND COVERS GROUP--Side View - Part 1 of 2
7S3601 Cylinder Block parts are shown on Page 55
CYLINDER BLOCK AND COVERS GROUP
6N-6752 CYLINDER BLOCK AND COVERS GROUP
6N6752 CYLINDER BLOCK AND COVERS GROUP--End View - Part 2 of 2
See Page 62 for Gasket Kits
CYLINDER BLOCK
7S-3601 CYLINDER BLOCK
CYLINDER BLOCK (7S3601 N/S)
Serial No. 62B6728 to 62B8588 inclusive. Part of 1N5512, 1N7500 and 2N7985 Cylinder Block and Covers Groups shown
on Pages 40, 42, 46, 48, 50 and 52. Note: For Field Replacement order 9S6169 Service Block Group
CYLINDER BLOCK ASSEMBLY
7S-3601 CYLINDER BLOCK ASSEMBLY
7S3601 CYLINDER BLOCK ASSEMBLY
Serial No. 62B8589-Up. Part of 1N5512, 1N7500 and 2N7985 Cylinder Block and Covers
Groups shown on Pages 42, 44, 46, 48, 50 and 52
CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Part 1 of 2
Serial No. 62B6728 to 62B9585 inclusive
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 62B6728 to 62B9585 inclusive
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Part 1 of 2
Serial No. 62B9586 to 62B11582 inclusive
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 62B9586 to 62B11582 inclusive
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Part 1 of 2
Serial No. 62B11583 to 62B12326 inclusive
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 62B11583 to 62B12326 inclusive
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Part 1 of 2
Serial No. 62B12327-Up
See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 62B12327-Up
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-7501 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N7501 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Type 1--Part 1 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-7501 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N7501 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Type 1--Part 2 of 2
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-7501 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N7501 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Type 2--Part 1 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-7501 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N7501 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Type 2--Part 2 of 2
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-7501 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N7501 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Type 3--Part 1 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-7501 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N7501 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Type 3--Part 2 of 2
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
2N-7986 CYLINDER HEAD AND VALVE MECHANISM GROUP
2N7986 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Type 1--Part 1 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
2N-7986 CYLINDER HEAD AND VALVE MECHANISM GROUP
2N7986 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Type 1--Part 2 of 2
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
2N-7986 CYLINDER HEAD AND VALVE MECHANISM GROUP
2N7986 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Type 2--Part 1 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
2N-7986 CYLINDER HEAD AND VALVE MECHANISM GROUP
2N7986 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Type 2--Part 2 of 2
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
2N-7986 CYLINDER HEAD AND VALVE MECHANISM GROUP
2N7986 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Type 3--Part 1 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
2N-7986 CYLINDER HEAD AND VALVE MECHANISM GROUP
2N7986 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Type 3--Part 2 of 2
Only separate parts serviced
DAMPER GP
CRANKSHAFT AND DAMPER GROUP
8L-4429 CRANKSHAFT AND DAMPER GROUP
8L4429 CRANKSHAFT AND DAMPER GROUP
Serial No. 62B6728 to 62B10004 inclusive
Only separate parts serviced
CRANKSHAFT AND DAMPER GROUP
8L-4429 CRANKSHAFT AND DAMPER GROUP
8L4429 CRANKSHAFT AND DAMPER GROUP
Serial No. 62B10005 to 62B10087 inclusive
Only separate parts serviced
CRANKSHAFT AND DAMPER GROUP
8L-4429 CRANKSHAFT AND DAMPER GROUP
8L4429 CRANKSHAFT AND DAMPER GROUP
Serial No. 62B10088 to 62B18486 inclusive
CRANKSHAFT AND DAMPER GROUP
8L-4429 CRANKSHAFT AND DAMPER GROUP
8L4429 CRANKSHAFT AND DAMPER GROUP
Serial No. 62B18487 to 62B18618 inclusive
CRANKSHAFT AND DAMPER GROUP
8L-4429 CRANKSHAFT AND DAMPER GROUP
8L4429 CRANKSHAFT AND DAMPER GROUP
Serial No. 62B18619--Only
CRANKSHAFT AND DAMPER GROUP
8L-4429 CRANKSHAFT AND DAMPER GROUP
8L4429 CRANKSHAFT AND DAMPER GROUP
Serial No. 62B18620-Up
DRIVE GP-ACCESSORY
ACCESSORY DRIVE GROUP
1N-8428 ACCESSORY DRIVE GROUP
1N8428 ACCESSORY DRIVE GROUP
Serial No. 62B6728 to 62B10703 inclusive
8S5115 Variable Timing Drive parts are shown on Page 168
Only separate parts serviced
ACCESSORY DRIVE GROUP
1N-8428 ACCESSORY DRIVE GROUP
1N8428 ACCESSORY DRIVE GROUP
Serial No. 62B10704-Up
4N4788 Variable Timing Drive parts are shown on Page 168
Only separate parts serviced
DRIVE GP-AUXILIARY
AUXILIARY DRIVE GROUP
2N-6494 AUXILIARY DRIVE GROUP
2N6494 AUXILIARY DRIVE GROUP--R.H.--1.176:1 Ratio
AN ATTACHMENT
AUXILIARY DRIVE GROUP
1N-7502 AUXILIARY DRIVE GROUP
1N7502 AUXILIARY DRIVE GROUP--R.H.--1.176:1 Ratio
CANNOT BE USED WITH AUXILIARY WATER PUMP
Only separate parts serviced. AN ATTACHMENT
AUXILIARY DRIVE GROUP
2N-6492 AUXILIARY DRIVE GROUP
2N6492 AUXILIARY DRIVE GROUP--R.H.--1.176:1 Ratio
FOR USE WITH 2N6494 DRIVE GROUP SHOWN ON PAGE 375
AN ATTACHMENT
DRIVE GP-FAN
SUCTION FAN AND DRIVE GROUP
7L-7422 SUCTION FAN AND DRIVE GROUP
7L7422 SUCTION FAN AND DRIVE GROUP--33"--6 Blade
Only separate parts serviced. When complete Group
is required order 2N7559 shown on Page 110. AN ATTACHMENT
SUCTION FAN AND DRIVE GROUP
2N-7559 SUCTION FAN AND DRIVE GROUP
2N7559 SUCTION FAN AND DRIVE GROUP--33"--6 Blade
AN ATTACHMENT
SUCTION FAN AND DRIVE GROUP
6L-9912 SUCTION FAN AND DRIVE GROUP
6L9912 SUCTION FAN AND DRIVE GROUP--40"--8 Blade
Only separate parts serviced. When complete Group is required order 2N7558 shown on Page 112
AN ATTACHMENT
SUCTION FAN AND DRIVE GROUP
2N-7558 SUCTION FAN AND DRIVE GROUP
2N7558 SUCTION FAN AND DRIVE GROUP--40"--8 Blade
AN ATTACHMENT
DRIVE GP-PUMP
OIL PUMP AND DRIVE GROUP
4L-3346 OIL PUMP AND DRIVE GROUP
4L3346 OIL PUMP AND DRIVE GROUP
9S1195 Pump parts are shown on Pages 72 and 73
WATER PUMP AND DRIVE GROUP
1N-5304 WATER PUMP AND DRIVE GROUP
1N5304 WATER PUMP AND DRIVE GROUP
Part of 1N7503 Auxiliary Water Pump and Drive Group
FLYWHEEL GP
FLYWHEEL GROUP
8L-4428 FLYWHEEL GROUP
8L4428 FLYWHEEL GROUP
Only separate parts serviced
HOUSING GP-FLYWHEEL
7L-5950 FLYWHEEL HOUSING ADAPTER GROUP
7L5950 FLYWHEEL HOUSING ADAPTER GROUP
FOR USE WITHOUT STANDARD FLYWHEEL
AN ATTACHMENT
LIFTING GP-ENGINE
LIFTING EYE GROUP
6L-3142 LIFTING EYE GROUP
6L3142 LIFTING EYE GROUP
Only separate parts serviced
LIFTING EYE GROUP
2N-7991 LIFTING EYE GROUP
2N7991 LIFTING EYE GROUP
Only separate parts serviced
MISCELLANEOUS INFORMATION
OUTPUT DRIVE MOUNTING GROUP
1L-9050 OUTPUT DRIVE MOUNTING GROUP
1L9050 OUTPUT DRIVE MOUNTING GROUP
FOR USE WITH STRAIGHT SHAFT OUTPUT ASSEMBLY WHEN USED WITH
OR WITHOUT REVERSE GEAR. Only separate parts serviced
AN ATTACHMENT
OUTPUT DRIVE MOUNTING GROUP
1L-9051 OUTPUT DRIVE MOUNTING GROUP
1L9051 OUTPUT DRIVE MOUNTING GROUP
FOR USE WITH HEAVY DUTY STRAIGHT SHAFT OUTPUT ASSEMBLY AND
WITHOUT REVERSE GEAR. Only separate parts serviced. AN ATTACHMENT
OUTPUT DRIVE MOUNTING GROUP
1L-9053 OUTPUT DRIVE MOUNTING GROUP
1L9053 OUTPUT DRIVE MOUNTING GROUP
FOR USE WITH WIDE CHAIN OUTPUT ASSEMBLY AND WITHOUT REVERSE
GEAR. Only separate parts serviced. AN ATTACHMENT
MOUNTING GP-ENGINE
SUPPORT GROUP
4L-3326 SUPPORT GROUP
4L3326 SUPPORT GROUP
Serial No. 62B6728 to 8414, 8416 to 8424, 8428, 8429, 8432 to 8857, 8859 to
8920, 8929 and 62B8933 inclusive. Only separate parts serviced
FRONT SUPPORT GROUP
3N-1889 FRONT SUPPORT GROUP
3N1889 FRONT SUPPORT GROUP
Serial No. 62B8415, 8425 to 8427, 8430, 8431, 8858, 8921 to 8928, 8930 to
8932 and 62B8934-Up. AN ATTACHMENT
REAR SUPPORT GROUP
3N-1893 REAR SUPPORT GROUP
3N1893 REAR SUPPORT GROUP
Serial No. 62B8415, 8425 to 8427, 8430, 8431, 8858, 8921 to 8928,
8930 to 8932 and 62B8934-Up. AN ATTACHMENT
PAN GP-OIL
OIL PAN GROUP
4L-3343 OIL PAN GROUP
4L3343 OIL PAN GROUP
Only separate parts serviced
OIL PAN GROUP
6N-6750 OIL PAN GROUP
6N6750 OIL PAN GROUP
PISTON & ROD GP
CONNECTING ROD AND PISTON GROUP
8S-0813 CONNECTING ROD AND PISTON GROUP
8S813 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 62B6728 to 62B7278 inclusive
Only separate parts serviced
CONNECTING ROD AND PISTON GROUP
8S-0813 CONNECTING ROD AND PISTON GROUP
8S813 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 62B7279 to 62B8588 inclusive
Only separate parts serviced
CONNECTING ROD AND PISTON GROUP
8S-0813 CONNECTING ROD AND PISTON GROUP
8S813 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 62B8589-Up
Only separate parts serviced
PISTON GP-ROD
9L-6055 PISTON GP-ROD
9L6055 CONNECTING ROD AND PISTON GROUP--6 Required
POWER TAKE-OFF GP
POWER TAKE-OFF STUB SHAFT GROUP
1N-9461 POWER TAKE-OFF STUB SHAFT GROUP
1N9461 POWER TAKE-OFF STUB SHAFT GROUP--Rear Mounted
Only separate parts serviced
AN ATTACHMENT
PULLEY GP
AUXILIARY DRIVE PULLEY GROUP
4L-5798 AUXILIARY DRIVE PULLEY GROUP
4L5798 AUXILIARY DRIVE PULLEY GROUP
FOR USE WITH AUXILIARY WATER PUMP
Only separate parts serviced. AN ATTACHMENT
SHAFT GP-STUB
GUARD GP-STUB SHAFT
3N-7779 GUARD GP-STUB SHAFT
3N7779 STUB SHAFT GUARD GROUP
AN ATTACHMENT
POWER TAKE-OFF STUB SHAFT GROUP
1N-9461 POWER TAKE-OFF STUB SHAFT GROUP
1N9461 POWER TAKE-OFF STUB SHAFT GROUP--Rear Mounted
Only separate parts serviced
AN ATTACHMENT
SHAFT GP-FRONT PTO STUB
6L-2691 SHAFT GP-FRONT PTO STUB
6L2691 POWER TAKE-OFF STUB SHAFT GROUP--Front Mounted--Type 1
AN ATTACHMENT
SHAFT GP-FRONT PTO STUB
6L-2691 SHAFT GP-FRONT PTO STUB
6L2691 POWER TAKE-OFF STUB SHAFT GROUP--Front Mounted--Type 2
AN ATTACHMENT
SERPENTINE/V-BELTS
ALTERNATOR BELT GUARD GROUP
6N-7107 ALTERNATOR BELT GUARD GROUP
6N7107 ALTERNATOR BELT GUARD GROUP
Serial No. 62B14519-Up. FOR USE WITHOUT FAN DRIVE OR FRONT POWER
TAKE-OFF. AN ATTACHMENT
VALVE MECHANISM GP
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Part 1 of 2
Serial No. 62B6728 to 62B9585 inclusive
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 62B6728 to 62B9585 inclusive
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Part 1 of 2
Serial No. 62B9586 to 62B11582 inclusive
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 62B9586 to 62B11582 inclusive
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Part 1 of 2
Serial No. 62B11583 to 62B12326 inclusive
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 62B11583 to 62B12326 inclusive
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Part 1 of 2
Serial No. 62B12327-Up
See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-5513 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N5513 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 62B12327-Up
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-7501 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N7501 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Type 1--Part 1 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-7501 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N7501 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Type 1--Part 2 of 2
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-7501 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N7501 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Type 2--Part 1 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-7501 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N7501 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Type 2--Part 2 of 2
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-7501 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N7501 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Type 3--Part 1 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
1N-7501 CYLINDER HEAD AND VALVE MECHANISM GROUP
1N7501 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Type 3--Part 2 of 2
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
2N-7986 CYLINDER HEAD AND VALVE MECHANISM GROUP
2N7986 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Type 1--Part 1 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
2N-7986 CYLINDER HEAD AND VALVE MECHANISM GROUP
2N7986 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Type 1--Part 2 of 2
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
2N-7986 CYLINDER HEAD AND VALVE MECHANISM GROUP
2N7986 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Type 2--Part 1 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
2N-7986 CYLINDER HEAD AND VALVE MECHANISM GROUP
2N7986 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Type 2--Part 2 of 2
Only separate parts serviced
CYLINDER HEAD AND VALVE MECHANISM GROUP
2N-7986 CYLINDER HEAD AND VALVE MECHANISM GROUP
2N7986 CYLINDER HEAD AND VALVE MECHANISM GROUP--Top View--Type 3--Part 1 of 2
Only separate parts serviced. See Page 62 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM GROUP
2N-7986 CYLINDER HEAD AND VALVE MECHANISM GROUP
2N7986 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Type 3--Part 2 of 2
Only separate parts serviced

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Engine News
New 8T2998 Lubricant Available
1986/03/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Engine News
Installation Of Rear Bearing Oil Seals In 3N6542, 3N8617, And 3N8618 Rear Power Takeoff Clutch Groups
1981/05/20
Service Magazine
Installation Of Rear Bearing Oil Seals In 3N6542, 3N8617, And 3N8618 Rear Power Takeoff Clutch Groups{3055}
1981/05/11
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Crankshaft Now Has A Fillet Radius At Front Main Bearing Journal
1980/10/22
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Crankshaft Has Step At Front Of No. 1 Main Bearing Journal
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again
1977/05/13
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy
1977/11/09
New Flange-Type Seal Used At Rear Of Crankshaft
1978/08/16
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of 7N142 Seal Group{1160}
Installation Of 7N142 Seal Group{1160}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Flange-Type Seal Used At Rear Of Crankshaft{1161}
1978/07/10
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Crankshaft Now Has A Fillet Radius At Front Main Bearing Journal
1980/10/22
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
Crankshaft Has Step At Front Of No. 1 Main Bearing Journal
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
New Engine Cylinder Liner Available {1216}
1996/01/17
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy
1977/11/09
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Service Letter-NACD
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Service Letter-APD
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Improved Manufacturing Process Extends Service Life Of New Exhaust Valves
1990/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Use Correct Washers With Cylinder Head Bolts
1992/01/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
New Water Temperature Regulator Has A Closer Fit At The Valve Seat To Keep Leakage At A Minimum{1355}
1977/01/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Manufacturing Process Extends Service Life Of New Exhaust Valves {1105}
1990/05/28
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Use Correct Washers With Cylinder Head Bolts{1100}
1992/01/20
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Special Instruction
Dynamometer Test Specifications For Caterpillar Engines{1000}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Engine News
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again
1977/05/13
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Engine News
New Flange-Type Seal Used At Rear Of Crankshaft
1978/08/16
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Flange-Type Seal Used At Rear Of Crankshaft{1161}
1978/07/10
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Engine News
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again
1977/05/13
Service Magazine
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings
1980/08/13
Crankshaft Now Has A Fillet Radius At Front Main Bearing Journal
1980/10/22
Parts Service Information For Pistons And Rings
1983/01/19
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again
1977/05/13
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy
1977/11/09
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
New Flange-Type Seal Used At Rear Of Crankshaft
1978/08/16
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of 7N142 Seal Group{1160}
Installation Of 7N142 Seal Group{1160}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Magazine
Installation Of Rear Bearing Oil Seals In 3N6542, 3N8617, And 3N8618 Rear Power Takeoff Clutch Groups{3055}
1981/05/11
Do Not Use "V" Mark As Reference To Install Pistons With Keystone-Type Rings{1214,1215}
1981/12/07
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Flange-Type Seal Used At Rear Of Crankshaft{1161}
1978/07/10
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Use Correct Washers With Cylinder Head Bolts{1100}
1992/01/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Engine News
"Off-Size" Bearing Kits Available
1991/10/01
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings
1980/08/13
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Parts Service Information For Pistons And Rings
1983/01/19
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy
1977/11/09
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Magazine
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings{1215,1214,1213}
1980/08/04
Do Not Use "V" Mark As Reference To Install Pistons With Keystone-Type Rings{1214,1215}
1981/12/07
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
Installation Of Rear Bearing Oil Seals In 3N6542, 3N8617, And 3N8618 Rear Power Takeoff Clutch Groups
1981/05/20
Service Magazine
Installation Of Rear Bearing Oil Seals In 3N6542, 3N8617, And 3N8618 Rear Power Takeoff Clutch Groups{3055}
1981/05/11
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20
Engine News
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Engine News
New 6V87 Gauge Measures Valve Stem Wear
1979/01/10
Separate Valve Stem Gauges Available
1982/08/25
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
Use Of 5P8690 Fixture Assembly And 5P8691 Socket For Reconditioning Of 5M4169 Cam Follower Assemblies{1112}
Use Of 5P8690 Fixture Assembly And 5P8691 Socket For Reconditioning Of 5M4169 Cam Follower Assemblies{1112}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
5P8690 Fixture Group And 5P8691 Socket Are Available For Easier Reconditioning Of 5M4169 Cam Followers{0622}
1978/10/23
Do Not Use Heli-Coils&reg; To Repair Rocker Arm Assemblies On 5.4&quot; Bore Engines {1123}
1988/12/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

1999 CAT D343
Call 
1999 CAT D343

REICAL
CAT D343
USD $9,850 
CAT D343

Elite Equipment Pros, LLC
Parker, Colorado 80138
CAT D343
Call 
CAT D343

JW Bell LLC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.