AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3N5600 WIRING HARNESS ASSEMBLY--Type 4 FOR USE WITH ELECTRIC WOODWARD GOVERNOR Also part of 3N7046 and 3N6419 Start-Stop Arrangements listed on Page 256 Refer to Automatic Start-Stop Chart listed on Page 254C for usage. AN ATTACHMENT D343


ELECTRICAL AND STARTING SYSTEM
WIRING GP
SHUTOFF GP
BOX GP
SHUTOFF GP

INDUSTRIAL ENGINE D343 INDUSTRIAL ENGINE 62B
 D343 ENGINE 62B06728-UP UEG0873S D343 62B   (1960)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
8L-4849 WIRING GP
WIRING HARNESS ASSEMBLY
3N-5600 WIRING HARNESS ASSEMBLY
WIRING HARNESS ASSEMBLY
3N-5600 WIRING HARNESS ASSEMBLY
WIRING HARNESS ASSEMBLY
3N-5600 WIRING HARNESS ASSEMBLY
WIRING HARNESS ASSEMBLY
3N-5600 WIRING HARNESS ASSEMBLY
WIRING HARNESS ASSEMBLY
3N-5600 WIRING HARNESS ASSEMBLY
6L-4407 WIRING GP-PLUG
2L-9808 WIRING GP
 

#UEG0873S0400
 

3N-5600: WIRING HARNESS ASSEMBLY

3N5600 WIRING HARNESS ASSEMBLY--Type 4
FOR USE WITH ELECTRIC WOODWARD GOVERNOR
Also part of 3N7046 and 3N6419 Start-Stop Arrangements listed on Page 256
Refer to Automatic Start-Stop Chart listed on Page 254C for usage. AN ATTACHMENT
c162220 UEG0873S
3N5600 WIRING HARNESS ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D343 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1475 C [24] TERMINAL  
2. 2L-8057 [3] TERMINAL  
3. 3N-9696 [1] CONNECTOR  
4. 5P-1276 J CONDUIT 59 cm(23.23 in.)  
5. 3N-9697 [1] FERRULE  
6. 2L-8068 C [2] TERMINAL  
7. 8L-8413 [90] STRAP (use as required)  
8. 2L-8061 [1] TERMINAL  
9. 5P-1477 [5] TERMINAL  
10. 5P-1476 [2] TERMINAL  
11. 032-9798 [2] TERMINAL  
12. 2L-8071 [3] TERMINAL  
13. 2L-8075 C [6] TERMINAL  
14. 2L-8065 C [2] TERMINAL  
    THE FOLLOWING WIRE IS AVAILABLE:
  5P-6021 H WIRE (8 gauge)  
  5P-5632 H WIRE (10 gauge)  
  5P-5629 H WIRE (14 gauge)  
  C   INDICATES CHANGE
  H   ORDER BY THE METRE
  J   ORDER BY THE CENTIMETRE
 

#UEG0873S0401
 

3N-5600: WIRING HARNESS ASSEMBLY

3N5600 WIRING HARNESS ASSEMBLY--Type 5
FOR USE WITH ELECTRIC WOODWARD GOVERNOR
Also part of 3N7046 and 3N6419 Start-Stop Arrangements listed on Page 256
Refer to Automatic Start-Stop Chart listed on Page 254C for usage. AN ATTACHMENT
c171247 UEG0873S
3N5600 WIRING HARNESS ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D343 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1475 C [22] TERMINAL  
2. 2L-8057 [3] TERMINAL  
3. 3N-9696 [1] CONNECTOR  
4. 5P-1276 J CONDUIT 59 cm (23.23 in.)  
5. 3N-9697 [1] FERRULE  
6. 2L-8068 [2] TERMINAL  
7. 8L-8413 [90] STRAP (use as required)  
8. 2L-8061 [1] TERMINAL  
9. 5P-1477 [5] TERMINAL  
10. 5P-1476 [2] TERMINAL  
11. 8S-4626 C [2] SPLICE  
12. 2L-8071 [3] TERMINAL  
13. 2L-8075 C [14] TERMINAL  
14. 2L-8065 [2] TERMINAL  
15. 2L-8076 C [2] TERMINAL  
    THE FOLLOWING WIRE IS AVAILABLE:
  5P-5689 CH WIRE (8 gauge)  
  5P-5622 CH WIRE (10 gauge)  
  5P-5624 CH WIRE (14 gauge)  
  C   INDICATES CHANGE
  H   ORDER BY THE METER
  J   ORDER BY THE CENTIMETER
 

#UEG0873S0402
 

5L-8984: SOLENOID SHUT-OFF GROUP

5L8984 SOLENOID SHUT-OFF GROUP--24 Volt
Replaced by 3N584. FOR USE WITH HYDRO-MECHANICAL GOVERNOR. Also
part of 2N3889 and 2N1946 Arrangements listed on Pages 257 and 262
AN ATTACHMENT
c111877 UEG0873S
5L8984 SOLENOID SHUT-OFF GROUP Parts scheme
  For full view, you need register

Parts for your D343 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2N-2385 [1] SOLENOID  
  5L-8983 [1] SPRING  
  5L-8982 [1] SHAFT (1.44" LONG)  
    - OR -
  7L-5189 [1] SHAFT (2" LONG)  
  5B-9079 [1] NUT  
  8L-3873 [1] GASKET  
  2L-8919 [4] DISCONNECT  
  2L-8076 [2] TERMINAL  
  4S-8787 H [9IN.] WIRE  
  8F-1559 [2] INSULATOR  
  H   ORDER BY THE FOOT
 

#UEG0873S0403
 

3N-0584: SHUT-OFF GP-SOLENOID

3N584 SOLENOID SHUT-OFF GROUP--24 Volt
Also part of 3N6419, 2N3889, 3N873 and 2N1946 Arrangements listed on Pages
256, 257 and 262. Refer to Chart listed on Pages 254B and 254C
for usage. AN ATTACHMENT
c218010 UEG0873S
3N0584 SHUT-OFF GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your D343 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3N-8085 C [1] DIODE ASSEM.  
  2N-2385 [1] SOLENOID  
  5L-8983 [1] SPRING  
  3N-0548 [1] SHAFT  
    (USED WITHOUT WOODWARD GOVERNOR)
  7L-5189 [1] SHAFT  
    (USED WITH WOODWARD GOVERNOR)
  5B-9079 [1] NUT  
  8L-3873 [1] GASKET  
  2L-8919 [4] DISCONNECT  
  2L-8076 [2] TERMINAL  
  5P-5624 HC WIRE .240 m(9.44 in.)  
  8F-1559 [2] INSULATOR  
  C   INDICATES CHANGE
  H   ORDER BY THE METRE
 

#UEG0873S0404
 

3N-0859: JUNCTION BOX GP

3N859 JUNCTION BOX GROUP
FOR USE WITH ELECTRIC WOODWARD GOVERNOR. Also part of 3N874 and
3N873 Start-Stop Arrangements listed on Pages 255 and 257
AN ATTACHMENT
c203114 UEG0873S
3N0859 JUNCTION BOX GP Parts scheme
  For full view, you need register

Parts for your D343 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-5520 C [4] SCREW-TAPPING  
2. 5L-8546 [1] STRIP-MARKER  
3. 4D-1260 [1] STRIP-TERMINAL  
4. 9B-7155 [2] SCREW-MACHINE  
  4B-2047 [2] NUT  
  3B-4502 [2] LOCKWASHER  
5. 4B-4276 [2] WASHER  
  4B-1320 [2] SCREW-MACHINE  
6. 1B-4330 [2] NUT  
  3B-4504 [2] LOCKWASHER  
7. 3N-0854 [1] BOX-JUNCTION  
8. 3N-0856 [2] BRACKET  
9. 0L-1351 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  5M-2894 [2] WASHER  
10. 3N-0855 [1] COVER-BOX  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0873S0405
 

5L-6546: JUNCTION BOX GROUP

5L6546 JUNCTION BOX GROUP
Part of 2N2400 and 2N3889 Start-Stop Arrangements listed on Pages 255 and 257
Refer to Chart listed on Pages 254B and 254C for usage
AN ATTACHMENT
c203542 UEG0873S
5L6546 JUNCTION BOX GROUP Parts scheme
  For full view, you need register

Parts for your D343 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4M-4147 [1] GASKET  
  5L-1764 [1] COVER  
    (PART OF BOX ASSEM. 5L1767)
  5L-6538 [1] BRACKET  
  2L-8049 [1] TERMINAL  
  4B-1221 [1] SCREW  
    (PART OF BOX ASSEM. 5L1767)
  4F-8711 [2] PLUG  
  3F-9501 [1] MARKER  
  5L-1767 [1] BOX ASSEM.  
  7F-6518 [1] BRIDGE  
  5L-2579 [1] GROMMET  
  6F-8974 [1] TERMINAL STRIP  
  6F-9135 [1] STRIP (MARKER)  
  5P-0606 HC [WIRE 18.29 D M] WIRE  
    (72 IN.)
  3F-9509 [1] MARKER  
  3F-9501 [1] MARKER  
  2L-8054 [1] TERMINAL  
  3F-9509 [1] MARKER  
  5H-4871 [3] PLUG  
  2L-8054 [1] TERMINAL  
  2L-8049 [1] TERMINAL  
  8F-5758 [4] SCREW  
  3B-4504 [4] LOCKWASHER  
  4B-1232 [2] SCREW  
  4B-2047 [2] NUT  
  3B-4502 [2] LOCKWASHER  
  0S-1621 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE DECIMETRE
 

#UEG0873S0406
 

2N-4392: JUNCTION BOX GROUP

2N4392 JUNCTION BOX GROUP
Part of 2N2400 and 2N3889 Start-Stop Arrangements listed on Pages
255 and 257. Only separate parts serviced
c132528 UEG0873S
2N4392 JUNCTION BOX GROUP Parts scheme
  For full view, you need register

Parts for your D343 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-4393 [1] BRACKET  
2. 5L-8546 [1] STRIP (Marker)  
3. 4B-1308 [2] BOLT  
  4B-2047 [2] NUT  
  3B-4502 [2] LOCKWASHER  
4. 4D-1260 [1] STRIP (Terminal)  
5. 0S-1621 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
6. 8L-4236 [1] BOX  
7. 2A-0762 [2] BOLT  
  1B-4330 [2] NUT  
  3B-4504 [2] LOCKWASHER  
  4B-4276 [2] WASHER  
 

#UEG0873S0407
 

2N-1946: SAFETY SHUT-OFF ARRANGEMENT

2N1946 SAFETY SHUT-OFF ARRANGEMENT--24 Volt
OIL PRESSURE AND WATER TEMPERATURE
AN ATTACHMENT
UEG0873S0407 UEG0873S
  For full view, you need register

Parts for your D343 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-6190 Y [1] SAFETY ALARM CONTACTOR GROUP  
  5L-8984 Y [1] SOLENOID SHUT-OFF GROUP  
    - OR -
  3N-0584 Y [1] SOLENOID SHUT-OFF GROUP  
  3L-6521 [1] TEE SWITCH TO FILTER BASE  
  2L-3402 [1] SWITCH FUEL PRESSURE  
  4L-1192 [1] WIRING GROUP  
  2L-9724 [4] CLIP  
  2L-8065 [6] TERMINAL  
  2L-8074 [4] TERMINAL  
  2L-8075 [21] TERMINAL  
  2L-8079 [2] TERMINAL  
  2L-8081 [2] TERMINAL  
  8L-8413 [50] TIE  
  4S-8787 WIRE (NO. 14) 25 FOOT  
  Y   SEPARATE ILLUSTRATION
 

#UEG0873S0408
 

3N-3956: SAFETY SHUT-OFF ARRANGEMENT

3N3956 SAFETY SHUT-OFF ARRANGEMENT--24 Volt
OIL PRESSURE AND WATER TEMPERATURE. FOR USE WITH 1N9790
WOODWARD GOVERNOR AND DRIVE GROUP SHOWN ON PAGES 184
THROUGH 189. AN ATTACHMENT
UEG0873S0408 UEG0873S
  For full view, you need register

Parts for your D343 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-6190 Y [1] CONTACTOR GROUP SAFETY ALARM  
  8F-1559 [2] INSULATOR  
  2L-3402 [1] SWITCH FUEL PRESSURE  
  2L-8076 [2] TERMINAL  
  2L-8919 [4] DISCONNECT  
  3L-6521 [1] TEE SWITCH TO FILTER BASE  
  4S-8787 WIRE (NO. 14) 9 INCH  
  4L-1192 [1] WIRING GROUP  
  2L-9724 [4] CLIP  
  2L-8065 [6] TERMINAL  
  2L-8074 [4] TERMINAL  
  2L-8075 [21] TERMINAL  
  2L-8079 [2] TERMINAL  
  2L-8081 [2] TERMINAL  
  8L-8413 [50] TIE  
  4S-8787 WIRE (NO. 14) 25 FOOT  
  Y   SEPARATE ILLUSTRATION
 

#UEG0873S0409
 

2N-4975: SAFETY SHUT-OFF GROUP

2N4975 SAFETY SHUT-OFF GROUP--Oil Pressure
FOR USE WITH HYDRO-MECHANICAL GOVERNOR. 8L4908 Shut-Off parts
are shown on Page 267. Only separate parts serviced. When complete Group
is required order 2N4963 shown on Page 264. AN ATTACHMENT
c130900 UEG0873S
2N4975 SAFETY SHUT-OFF GROUP Parts scheme
  For full view, you need register

Parts for your D343 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8999 [1] FITTING  
  8F-8997 [1] NUT  
    (Part of 3B8999 Fitting)
2. 2N-4962 [1] FLANGE  
3. 8B-8886 [1] LEVER  
  1B-8704 [1] KEY  
4. 7B-2742 [1] BOLT  
  1B-4330 [1] NUT  
  3B-4504 [1] LOCKWASHER  
5. 8L-3873 [2] GASKET  
6. 8L-4908 Y [1] SHUT-OFF ASSEM.  
    (See Separate Illustration)
7. 1F-4656 [2] FITTING  
  8F-8997 [2] NUT  
    (1 in each 1F4656 Fitting)
8. 2N-4958 [1] TUBE  
9. 5H-8936 [1] ADAPTER  
10. 3B-8996 [1] FITTING  
  8F-8997 [1] NUT  
    (Part of 3B8996 Fitting)
11. 2N-4959 [1] TUBE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/11/01
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Caterpillar Parts SIS Catalog D343 :

WIRING HARNESS ASSEMBLY
3N-5600 WIRING HARNESS ASSEMBLY
WIRING HARNESS ASSEMBLY
3N-5600 WIRING HARNESS ASSEMBLY
WIRING HARNESS ASSEMBLY
3N-5600 WIRING HARNESS ASSEMBLY
INSTRUMENT PANEL AS
3N-6354 INSTRUMENT PANEL AS
INSTRUMENT PANEL AS
3N-6354 INSTRUMENT PANEL AS
8L-4849 WIRING GP
3N-0873 AUTOMATIC START-STOP ARRANGEMENT
2N-3889 AUTOMATIC START-STOP ARRANGEMENT
WIRING HARNESS ASSEMBLY
3N-5600 WIRING HARNESS ASSEMBLY
SOLENOID SHUT-OFF GROUP
5L-8984 SOLENOID SHUT-OFF GROUP
SHUT-OFF GP-SOLENOID
3N-0584 SHUT-OFF GP-SOLENOID
JUNCTION BOX GP
3N-0859 JUNCTION BOX GP
JUNCTION BOX GROUP
5L-6546 JUNCTION BOX GROUP
JUNCTION BOX GROUP
2N-4392 JUNCTION BOX GROUP
2N-1946 SAFETY SHUT-OFF ARRANGEMENT
3N-3956 SAFETY SHUT-OFF ARRANGEMENT

Truck sale:

1999 CAT D343
Call 
1999 CAT D343

REICAL
CAT D343
USD $9,850 
CAT D343

Elite Equipment Pros, LLC
Parker, Colorado 80138
CAT D343
Call 
CAT D343

JW Bell LLC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.