AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3P1750 TRANSMISSION ARRANGEMENT Serial No. 87V736, 737, 739, 740 to 743, 745, 746, 750, 751 to 754, 760, 761, 763 to 768, 770, 771 and 87V776-Up and 82V638 to 644, 646, and 82V649-Up and Test No. 907-Up. 3P1751 Transfer Gears, 3P756 Planetary Transmission, 3P2807 Transmission Hydraulic Control, 3P2833 Transmission Lines, 6P2091 Transmission Filter and 3P892 Gear Pump parts are shown on Pages 61 through 63, 65 through 67, 70, 79 80 and 80A. Note: 5P3764 Transmission Overhaul Gasket Kit is available 120G


POWER TRAIN
TRANSMISSION GP
GEAR GP
TRANSMISSION GP
OPERATOR STATION
CONTROL GP-TRANSMISSION

MOTOR GRADER 120G MOTOR GRADER 82V
 120G MOTOR GRADER 82V00001-00667 (MACHINE) UEG0878S 120G 82V   (1974)

POWER TRAIN

TRANSMISSION GP
TRANSMISSION ARRANGEMENT
3P-1750 TRANSMISSION ARRANGEMENT
TRANSMISSION ARRANGEMENT
3P-1750 TRANSMISSION ARRANGEMENT
TRANSMISSION CASE AS
3P-1752 TRANSMISSION CASE AS
PLANETARY TRANSMISSION GROUP
3P-0756 PLANETARY TRANSMISSION GROUP
PLANETARY TRANSMISSION GROUP
3P-0756 PLANETARY TRANSMISSION GROUP
PLANETARY TRANSMISSION GROUP
3P-0756 PLANETARY TRANSMISSION GROUP
 

#UEG0878S0080
 

3P-1750: TRANSMISSION ARRANGEMENT

3P1750 TRANSMISSION ARRANGEMENT
Serial No. 87V736, 737, 739, 740 to 743, 745, 746, 750, 751 to 754, 760, 761, 763 to
768, 770, 771 and 87V776-Up and 82V638 to 644, 646, and 82V649-Up and Test
No. 907-Up. 3P1751 Transfer Gears, 3P756 Planetary Transmission, 3P2807
Transmission Hydraulic Control, 3P2833 Transmission Lines, 6P2091 Transmission
Filter and 3P892 Gear Pump parts are shown on Pages 61 through 63, 65 through
67, 70, 79 80 and 80A. Note: 5P3764 Transmission Overhaul Gasket Kit is available
c154882 UEG0878S
3P1750 TRANSMISSION ARRANGEMENT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-0892 Y [1] GEAR PUMP  
2. 3P-2807 Y [1] HYDRAULIC CONTROL  
3. 3P-1751 Y [1] TRANSFER GEAR  
    (Separate Illustration)
4. 3P-5826 [1] COVERS GROUP  
    (Shipping & Storage-Consists of Covers, Gaskets, Plugs, Seals, & Hardware)
5. 3P-0756 Y [1] PLANETARY TRANSMISSION  
6. 3P-2833 Y [1] OIL LINES  
7. 6P-2091 YC [1] TRANSMISSION FILTER GROUP  
    (Separate Illustration)
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0878S0081
 

3P-1751: TRANSFER CASE & GEAR GP

TRANSFER GEARS (3P1751 N/S)--Part 1 of 3
Part of 3P1750 Transmission Arrangement. 3P1752 Transmission Case parts
are shown on Page 64. Note: 5P3763 Gasket Kit is available
c203372 UEG0878S
3P1751 TRANSFER CASE & GEAR GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-1752 Y [1] CASE ASSEM.  
    (Separate Illustration)
2. 1A-2029 [6] BOLT  
  5M-2894 [6] WASHER  
3. 3P-0321 [1] CAGE  
  3P-0322 [1] SHIM PACK  
4. 0S-1585 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
5. 7F-8268 [1] SEAL  
6. 0L-2315 [1] BOLT  
7. 4S-5824 [1] RETAINER  
8. 4H-5440 [2] COVER  
  7L-3111 [2] GASKET  
9. 8S-9130 [2] SCREEN  
  8S-9129 [2] FILTER  
10. 0S-1594 [8] BOLT  
11. 3B-4506 [46] LOCKWASHER  
12. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL  
13. 3P-0320 [1] COVER  
14. 0S-1588 [31] BOLT  
15. 1D-4717 [6] NUT  
16. 6B-5262 [1] PLUG  
  6K-5551 [1] GASKET  
17. 2P-9326 [1] GASKET  
18. 2P-9325 [1] COVER  
19. 3P-6061 [1] GASKET  
20. 2N-0822 [1] PLATE  
21. 6F-6673 [1] SEAL  
22. 9S-8009 [2] PLUG  
  4K-1388 [2] SEAL  
23. 0S-1591 [1] BOLT  
24. 4B-4278 [19] WASHER  
25. 4F-9029 [5] SEAL  
26. 3B-6553 [1] ELBOW  
27. 8S-5820 [1] BREATHER  
  Y   SEPARATE ILLUSTRATION
 

#UEG0878S0082
 

3P-1751: TRANSFER CASE & GEAR GP

TRANSFER GEARS (3P1751 N/S)--Part 2 of 3
Part of 3P1750 Transmission Arrangement shown on Page 60
c155938 UEG0878S
3P1751 TRANSFER CASE & GEAR GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3934 [2] SEAL  
2. 3P-6599 [1] RING  
3. 1P-9341 [1] BEARING ASSEM.  
4. 2P-1068 [1] RING  
5. 3P-0329 [1] DRUM ASSEM.  
6. 3P-5728 [1] RING  
  3P-5859 [1] SEAL  
7. 3P-0337 [6] PLATE (clutch)  
8. 3P-0340 [6] DISC ASSEM.  
9. 3P-0341 [1] GEAR (teeth)  
10. 4F-8965 [8] BOLT  
11. 3P-5737 [2] SHAFT ASSEM.  
    (Includes)
  3P-7009 [1] PLUG  
  7D-0225 [2] DOWEL  
12. 7M-4673 [1] DOWEL  
13. 8J-6322 [2] CUP  
  1B-3953 [2] CONE  
14. 1L-8497 [1] RING  
15. 8S-9030 [1] CARRIER  
16. 8S-6378 [2] SEAL  
18. 1T-0234 [2] RING  
19. 1S-8478 [6] SPRING  
20. 3P-5360 [1] HUB  
21. 3P-5726 [1] RING  
22. 3P-0335 [1] PLATE  
23. 3P-5359 [1] PISTON  
24. 3P-5347 [1] PLATE  
25. 3D-2898 [1] SEAL  
26. 3P-0327 [2] SHIM PACK  
27. 3P-0325 [2] CAGE ASSEM.  
    (Includes)
28. 1L-8497 [1] RING  
29. 8S-9030 [1] CARRIER  
30. 9S-8005 [2] PLUG  
  3K-0360 [2] SEAL  
31. 2H-3777 [2] NUT  
  5F-8916 [2] LOCK  
32. 1A-2029 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
33. 3P-3426 [1] LEVER  
34. 3P-3424 [1] SHAFT  
35. 2N-7609 [1] BEARING  
36. 3K-4897 [2] PIN  
37. 6K-8088 [1] BEARING  
38. 3P-6159 [1] LEVER  
 

#UEG0878S0083
 

3P-1751: TRANSFER CASE & GEAR GP

TRANSFER GEARS (3P1751 N/S)--Part 3 of 3
Part of 3P1750 Transmission Arrangement shown on Page 60
c203374 UEG0878S
3P1751 TRANSFER CASE & GEAR GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-0340 [6] DISC ASSEM.  
2. 3P-0337 [6] PLATE (clutch)  
3. 3P-0323 [1] GEAR (47 teeth)  
4. 1P-2636 [3] CUP  
  1P-2662 [3] CONE  
5. 4B-9530 [1] GUIDE  
6. 9S-3582 [1] CONE  
7. 9S-3581 [1] CUP  
8. 2R-0098 [1] SEAL  
9. 3P-5360 [1] HUB  
10. 4F-8965 [8] BOLT  
11. 8S-9030 [1] CARRIER  
12. 1L-8497 [1] RING  
13. 8J-6322 [2] CUP  
  1B-3953 [2] CONE  
14. 1T-0234 [2] RING  
15. 3P-5728 [1] RING  
  3P-5859 [1] SEAL  
16. 1S-8478 [6] SPRING  
17. 3P-0342 [1] GEAR  
18. 3P-0754 [1] SHAFT ASSEM.  
    (Includes)
19. 8M-6521 [1] PIN  
20. 7S-8576 [1] BEARING ASSEM.  
21. 3P-0343 [1] GEAR (idler-62 teeth)  
22. 5K-4068 [1] RING  
23. 4H-7859 [1] NUT  
  1B-6161 [1] LOCK  
24. 3P-0294 [1] CAGE ASSEM.  
    (Includes)
25. 8S-9030 [1] CARRIER  
26. 3K-0834 [1] BEARING  
27. 8M-1047 [6] STUD  
28. 1P-9646 [1] RING  
  1P-9645 [1] SPACER  
29. 3P-0296 [1] GEAR (73 teeth)  
30. 8S-6378 [3] SEAL  
31. 3H-0107 [3] SEAL  
32. 5H-3252 [1] SEAL  
33. 5M-7423 [1] SEAL  
34. 3P-5359 [1] PISTON  
35. 3P-5347 [1] PLATE  
36. 1P-9341 [1] BEARING ASSEM.  
37. 3P-6599 [1] RING  
38. 2H-3934 [2] SEAL  
39. 3D-2898 [1] SEAL  
40. 2P-1068 [1] RING  
41. 3P-5726 [1] RING  
42. 3P-0335 [1] PLATE  
43. 3P-0329 [1] DRUM ASSEM.  
 

#UEG0878S0084
 

3P-1752: TRANSMISSION CASE AS

3P1752 TRANSMISSION CASE ASSEMBLY
Part of Transfer Gears shown on Page 61
c152288 UEG0878S
3P1752 TRANSMISSION CASE AS Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-2061 [2] DOWEL  
2. 9M-4007 [2] DOWEL  
3. 1P-8654 [2] EYE  
4. 0S-1589 [2] BOLT  
  3B-4510 [2] LOCKWASHER  
5. 3P-0852 [1] TUBE  
6. 1P-8594 [6] SLEEVE  
7. 2P-5780 [2] SLEEVE  
8. 3P-0854 [1] TUBE  
9. 3P-0857 [1] TUBE  
10. 3P-1749 [1] TUBE  
11. 3P-0858 [1] TUBE  
12. 5S-0385 [1] PLUG  
13. 3P-0853 [1] TUBE  
14. 3P-0851 [1] TUBE  
15. 6P-8273 C [1] SLEEVE  
  C   INDICATES CHANGE
 

#UEG0878S0085
 

3P-0756: PLANETARY TRANSMISSION GROUP

3P756 PLANETARY TRANSMISSION GROUP--Part 1 of 3
Part of 3P1750 Transmission Arrangement shown on Page 60
c202981 UEG0878S
3P0756 PLANETARY TRANSMISSION GROUP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-8109 [3] PIN  
2. 2S-5816 [30] SPRING  
3. 2P-2884 [6] WASHER  
4. 3P-1681 [9] DOWEL  
5. 1P-7492 [3] GEAR (21 teeth)  
6. 1M-3150 [5] DOWEL  
7. 0L-1351 [6] BOLT  
8. 5M-2894 [6] WASHER  
9. 9H-5537 [10] SPRING  
10. 3P-5349 [1] PISTON ASSEM.  
    (Includes)
  5H-8985 [5] PIN  
12. 3P-0786 [1] GEAR (32 & 101 teeth)  
13. 3P-0315 [1] PISTON  
14. 3P-0784 [1] PISTON  
15. 3P-0817 [3] SPRING  
16. 3P-0800 [1] RING  
  3P-0815 [1] SEAL  
17. 3P-0787 [1] PLATE  
18. 3P-0730 [3] GEAR (27 teeth)  
  5M-6126 [3] ROLLER ASSEM.  
19. 7S-8631 [3] SHAFT ASSEM.  
    (Each Includes)
  3S-0036 [1] PLUG  
20. 3P-0309 [1] CAGE  
21. 3P-0732 [3] GEAR (24 teeth)  
  5M-2054 [3] ROLLER ASSEM.  
22. 3P-0726 [3] SHAFT ASSEM.  
    (Each Includes)
  2A-3746 [1] PLUG  
23. 3P-0304 [1] GEAR (39 teeth)  
24. 3S-2708 [9] PIN  
25. 2P-2886 [18] WASHER  
26. 1P-7491 [3] GEAR (30 teeth)  
27. 5M-5018 [3] ROLLER ASSEM.  
28. 3P-0297 [3] SHAFT ASSEM.  
    (Includes)
  2A-3746 [1] PLUG  
29. 2S-0669 [6] ROLLER ASSEM.  
30. 5S-7945 [3] SHAFT ASSEM.  
    (Each Includes)
  2A-3746 [1] PLUG  
31. 3P-0298 [1] CARRIER  
32. 3P-1608 [1] RING  
 

#UEG0878S0086
 

3P-0756: PLANETARY TRANSMISSION GROUP

3P756 PLANETARY TRANSMISSION GROUP--Part 2 of 3
Part of 3P1750 Transmission Arrangement shown on Page 60
c212130 UEG0878S
3P0756 PLANETARY TRANSMISSION GROUP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4511 [4] RING  
2. 3P-0306 [1] CARRIER  
3. 5M-7878 [1] RING  
4. 3P-3713 [1] GEAR ASSEM. (sun-33 teeth)  
    (Includes)
  8S-3426 [1] DOWEL  
5. 3P-0951 [1] BEARING  
6. 3P-0789 [1] CARRIER ASSEM.  
    (Includes)
7. 8M-6521 [2] DOWEL  
8. 3P-0311 [1] GEAR (sun-27 teeth)  
9. 3P-0952 [1] BEARING  
10. 8S-9104 [1] RING  
11. 3P-0785 [1] HUB ASSEM.  
    (Includes)
  8S-3426 [1] DOWEL  
12. 3P-0814 [1] RING  
13. 3P-1654 [1] CAGE ASSEM.  
14. 2M-2123 [1] RING  
15. 8H-8830 [1] RING  
16. 3P-0316 [1] HUB ASSEM.  
    (Includes)
17. 8M-6521 [4] DOWEL  
18. 0S-1594 [4] BOLT  
  1S-8572 [2] LOCK  
19. 0S-1608 [14] BOLT  
20. 5M-2894 [14] WASHER  
21. 2P-9156 [1] GEAR (ring-81 teeth)  
22. 3K-1432 [1] RING  
23. 3P-0307 [1] CAGE ASSEM.  
    (Includes)
  8S-3426 [1] DOWEL  
24. 1M-8649 [1] RING  
25. 3P-0953 [1] BEARING  
26. 3P-0299 [1] SHAFT ASSEM. (center)  
27. 5M-2477 [1] PLATE (number)  
28. 7B-3028 [2] SCREW (drive)  
 

#UEG0878S0087
 

3P-0756: PLANETARY TRANSMISSION GROUP

3P756 PLANETARY TRANSMISSION GROUP--Part 3 of 3
Part of 3P1750 Transmission Arrangement shown on Page 60
c209652 UEG0878S
3P0756 PLANETARY TRANSMISSION GROUP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4364 [1] HOUSING ASSEM.  
    (Includes)
  5M-7937 [4] DOWEL  
2. 2P-4367 [1] HOUSING  
3. 3P-0312 [1] HOUSING ASSEM.  
    (Includes)
  4B-9880 [1] BALL  
  5F-4250 [2] DOWEL (large)  
  5M-7937 [2] DOWEL (small)  
4. 3P-1601 [4] PLUNGER  
5. 2B-2254 [4] SPRING  
6. 4D-1577 C [1] SEAL  
7. 3P-0318 [1] HOUSING ASSEM.  
    (Includes)
  3F-3442 [1] DOWEL  
8. 2K-6921 [4] DOWEL  
9. 1M-8657 [12] BOLT  
  2M-0849 [12] WASHER  
10. 0S-1588 [2] BOLT  
11. 3P-0801 [4] PLATE  
12. 3P-0805 [4] DISC ASSEM.  
13. 5F-6199 [5] BALL  
14. 3P-0860 [10] INSERT  
15. 9M-4355 [12] DAMPER  
16. 3S-8109 [2] PIN  
17. 2P-4432 [1] GEAR (81 teeth)  
18. 1P-9216 [4] RING  
19. 2P-4510 [4] PISTON  
20. 8P-1656 C [9] PLATE (clutch)  
21. 3P-5955 [4] DISC ASSEM.  
22. 2P-4435 [1] PLATE  
23. 2P-4433 [2] GEAR (81 teeth)  
24. 7F-8268 [1] SEAL  
25. 4F-8946 [1] SEAL  
26. 4F-7952 [1] SEAL  
27. 9S-8005 [1] PLUG  
  3K-0360 [1] SEAL  
28. 9S-8004 C [1] PLUG  
  3J-1907 [1] SEAL  
  C   INDICATES CHANGE
 

#UEG0878S0088
 

9D-5030: CONTROL GP-TRANSMISSION

TRANSMISSION CONTROL (9D5030 N/S)--Part 1 of 2
Serial No. 87V1 to 87V767 inclusive and 82V1 to 82V634 inclusive
c203363 UEG0878S
9D5030 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-5293 [4] RING  
2. 0S-1594 [11] BOLT  
3. 3B-4506 [2] LOCKWASHER  
4. 8D-5296 [1] COUPLING  
5. 8D-5297 [1] COUPLING  
6. 3D-2992 [2] SEAL  
7. 8D-5284 [1] RETAINER  
8. 9S-1354 [6] NUT  
9. 9D-4634 [1] CABLE  
10. 8D-5295 [2] PIN  
  8D-5294 [2] RING  
11. 9D-5506 [2] ROD END  
  1B-4201 [2] NUT  
12. 1P-8116 [2] SEAL  
13. 9D-4635 [1] CABLE  
14. 9D-0793 [1] SUPPORT ASSEM.  
15. 2D-3406 [1] PLUG  
16. 0L-1351 [16] BOLT  
17. 9F-5644 [33] LOCKWASHER  
18. 4B-4278 [14] WASHER  
19. 9D-0791 [1] PLATE ASSEM.  
20. 9D-0787 [1] PLATE ASSEM.  
    (Includes)
  6D-6538 [1] STUD  
21. 9D-1106 [1] GATE  
22. 9D-0811 [1] BRACKET  
  0T-0102 [2] BOLT  
23. 1D-4717 [4] NUT  
24. 7M-0706 [1] KNOB  
25. 8D-5366 [1] COVER  
  9D-5331 [1] GASKET  
26. 6F-0253 [2] LOCKWASHER  
27. 9D-0633 [1] HOUSING  
28. 9D-0682 [1] SUPPORT ASSEM.  
29. 9D-0801 [1] PAD  
30. 8D-6354 [6] SPACER  
31. 8D-9813 [6] WASHER  
32. 0S-1591 [6] BOLT  
 

#UEG0878S0089
 

9D-5030: CONTROL GP-TRANSMISSION

TRANSMISSION CONTROL (9D5030 N/S)--Part 2 of 2
Serial No. 87V1 to 87V767 inclusive and 82V1 to 82V634 inclusive
c203364 UEG0878S
9D5030 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-5387 [1] LEVER  
2. 7D-9327 [1] SHAFT  
3. 7D-9251 [6] BEARING  
4. 0T-0065 [1] BOLT  
  1D-4717 [1] NUT  
  3B-4506 [1] LOCKWASHER  
5. 8D-5450 [1] SHAFT ASSEM.  
6. 7D-0087 [1] LEVER  
7. 1B-8704 [2] KEY  
8. 6L-7751 [2] ROD END  
  1B-4201 [2] NUT  
9. 0S-1616 [2] BOLT  
  1H-3244 [2] LOCKWASHER  
10. 5H-3249 [2] RING  
11. 1B-7182 [2] BOLT  
  9M-6527 [2] WASHER  
12. 8D-5440 [1] SHAFT ASSEM.  
13. 7D-9304 [1] LEVER  
14. 7D-9343 [1] PLATE ASSEM.  
15. 1B-0676 [1] PIN  
  3B-4615 [1] COTTER PIN  
  4B-4278 [2] WASHER  
16. 1H-7366 [1] ROD  
17. 8S-9128 [1] SPRING  
18. 9D-0795 [1] PLATE ASSEM.  
19. 7D-9368 [1] ROD END  
20. 1B-4202 [2] NUT  
21. 3B-4505 [2] LOCKWASHER  
22. 9D-2343 [1] BRACKET ASSEM.  
    (Includes)
  4D-2619 [1] BEARING  
23. 7H-3641 [1] ROD END  
24. 4B-3388 [1] BOLT  
  1D-4716 [1] NUT  
 

Information:

Special Instruction
Installation Of Transmission Guard Groups{7153}
Installation Of Transmission Guard Groups{7153}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Specifications
Transmission<BR> (3P756 and 8P5958)
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Oil Pump For The Transmission<BR> (3P891)
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Relief Valve Group<BR> (2P5811)
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Relief Valve Group<BR> (3P840 and 8P4301)
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Transmission Control Group<BR> (3P841)
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Transmission Control
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Transmission
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Transmission Oil Filter
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Transmission Oil Pump
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Transmission Control Valve Group
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Transmission Control Group
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Engine Mounting Bolts
3304 VEHICULAR ENGINE
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Testing And Adjusting
12G, 120G. 130G, 140G MOTOR GRADERS
Testing &amp; Adjusting
12G, 120G, 130G & 140G MOTOR GRADERS POWER SHIFT TRANSMISSIO
Bench Test Procedures
Bench Test Procedure For A 120G, 130G, 140G, 160G, 12G, 14G, and 16G Motor Grader Transmission{3030, 3073}
Bench Test Procedure For A 120G, 130G, 140G, 160G, 12G, 14G, and 16G Motor Grader Transmission{3030, 3073}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission Control
12G, 14G, 16G, 120G, 130G & 140G MOTOR GRADERS OPERATOR'S ST
Transmission Oil Filter Base
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Relief Control Valve
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Transmission Oil And Scavenge Pump
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Transmission
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Transmission Hydraulic Control Valves
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Transmission Oil Cooler
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Transmission Oil Filter Base
120G MOTOR GRADER POWER TRAIN
Relief Control Valve
120G MOTOR GRADER POWER TRAIN
Transmission Oil And Scavenge Pump
120G MOTOR GRADER POWER TRAIN
Transmission
120G MOTOR GRADER POWER TRAIN
Transmission Hydraulic Control Valves
120G MOTOR GRADER POWER TRAIN
Service Magazine
Clearance Increased Between Sleeve Bearing And Transmission Center Shaft {3176}
1980/01/07
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
New Rod Ends With Steel Bearings Are Now Used For The Transmission Control Linkage{3156}
1983/05/30
New Transmission Parts Will Improve Service Life Of Support Bearings In Number 7 Clutch{3150}
1983/12/19
New Transmission Center Shaft Improves Lubrication And Cooling To Sleeve Bearing {3150}
1984/06/25
Shorter Pinion Shaft Prevents Possible Transmission Bearing Failures{3254}
1977/03/07
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Improvements To The Six-Speed Power Shift Transmission{3176}
1977/06/13
Bearing Of A Different Design Now Used In No. 7 Clutch Of Transmission Planetary Group{3155,7551}
1977/10/24
Spring Pins Now Used To Hold Lock Ring In Planetary Group{3150}
1977/12/19
Seal Ring Now Used At The Rear Of The Transmission Input Shaft{3150,3155}
1978/01/09
New Transmission And Engine Oil Cooler Has Rubber End Sheets{1375,1378}
1988/02/08
Improvements Made To Planetary Groups And Transfer Gear Groups{3176}
1988/03/28
Input Carrier In Planetary Gear Group Now Has Harder Drive Splines{3150}
1979/06/11
New Transmission Bearing Used Between Carrier And Hub For No. 7 Clutch{3160,3186}
1990/08/13
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 120G :

TRANSMISSION ARRANGEMENT
3P-1750 TRANSMISSION ARRANGEMENT
COOLANT FLOW SWITCH GROUP
2G-7540 COOLANT FLOW SWITCH GROUP
WARNING LIGHTING GROUP
2G-6095 WARNING LIGHTING GROUP
LIGHTING GP-WARNING
2G-6115 LIGHTING GP-WARNING
WARNING GP-BACK-UP
2G-5090 WARNING GP-BACK-UP
BACK-UP WARNING GROUP
9D-5249 BACK-UP WARNING GROUP
LIGHTING GROUP
9D-6090 LIGHTING GROUP
LIGHTING GP
2G-1010 LIGHTING GP
TRANSFER CASE & GEAR GP
3P-1751 TRANSFER CASE & GEAR GP
TRANSFER CASE & GEAR GP
3P-1751 TRANSFER CASE & GEAR GP
TRANSFER CASE & GEAR GP
3P-1751 TRANSFER CASE & GEAR GP
TRANSMISSION CASE AS
3P-1752 TRANSMISSION CASE AS
PLANETARY TRANSMISSION GROUP
3P-0756 PLANETARY TRANSMISSION GROUP
PLANETARY TRANSMISSION GROUP
3P-0756 PLANETARY TRANSMISSION GROUP
PLANETARY TRANSMISSION GROUP
3P-0756 PLANETARY TRANSMISSION GROUP
CONTROL GP-TRANSMISSION
9D-5030 CONTROL GP-TRANSMISSION

Truck sale:

Caterpillar 120G
 
Caterpillar 120G
- motor graders
HOLT CAT
 
40,000 
Caterpillar 120G, motor graders, Construction
- motor graders
ALTORFER INC.
Caterpillar H120GCS.CW40S, hammer, Construction
18,210 
Caterpillar H120GCS.CW40S, hammer, Construction
- hammer
BERGERAT MONNOYEUR S.A.S.
Caterpillar 120G, motor graders, Construction
32,000 
Caterpillar 120G, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
 
33,500 
Caterpillar HH120GCS, hammer, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.