AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3N3269 EXPANSION TANK GROUP--Type 1 FOR USE WITH OR WITHOUT HEAT EXCHANGER. FOR USE WITH 3N3279 OR 3N4926 HOUSING AND REGULATOR GROUPS AND 3N2850 WATER PUMP GROUP SHOWN ON PAGES 48 & 54 AN ATTACHMENT 3304


COOLING SYSTEM
TANK GP-EXPANSION
PUMP GP-WATER

INDUSTRIAL ENGINE 3304 INDUSTRIAL ENGINE 04B
 3304 INDUSTRIAL ENGINE 04B07794-14448 UEG0882S 3304 04B   (1968)

COOLING SYSTEM

TANK GP-EXPANSION
COVER GP-EXPANSION TANK
3N-4924 COVER GP-EXPANSION TANK
COVER GP-EXPANSION TANK
3N-4924 COVER GP-EXPANSION TANK
TANK GP-EXPANSION
3N-3269 TANK GP-EXPANSION
TANK GP-EXPANSION
3N-3269 TANK GP-EXPANSION
TANK GP-EXPANSION
3N-3269 TANK GP-EXPANSION
 

#UEG0882S0100
 

3N-3269: TANK GP-EXPANSION

3N3269 EXPANSION TANK GROUP--Type 1
FOR USE WITH OR WITHOUT HEAT EXCHANGER. FOR USE WITH 3N3279 OR 3N4926 HOUSING
AND REGULATOR GROUPS AND 3N2850 WATER PUMP GROUP SHOWN ON PAGES 48 & 54
AN ATTACHMENT
c203040 UEG0882S
3N3269 TANK GP-EXPANSION Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-3208 C [2] BOLT 2.50 in. (6.35 cm) long  
2. 5B-1345 [3] CLIP  
3. 5P-1420 CH HOSE 111.7 cm(44 in.)  
4. 0S-1615 [6] BOLT  
  3B-4504 [6] LOCKWASHER  
5. 6L-8700 [1] CLAMP  
6. 6L-8617 [1] CAP  
7. 8L-3934 [1] NECK ASSEM.  
8. 4L-7636 [1] GASKET  
9. 6B-0041 [1] COVER  
10. 6L-6580 [1] GASKET  
11. 2P-3200 [2] BOLT  
12. 2P-3201 C [6] BOLT 1 in.(2.54 cm) long  
13. 0S-1621 [2] BOLT  
14. 3N-2396 [1] BRACKET ASSEM.  
15. 6L-5567 [2] GASKET  
16. 3N-1439 [1] ELBOW  
17. 2P-3211 [1] BOLT 3.50 in.(8.89 cm) long  
18. 5P-1262 CH HOSE 6.09 cm(2.4 in)  
19. 9M-7959 [4] CLAMP  
20. 1A-1460 [2] BOLT  
21. 3N-4188 [1] TANK ASSEM.  
22. 1S-4662 [1] ELBOW  
23. 2P-1301 [1] BOLT  
24. 5P-1262 H HOSE 7.62 cm(3 in.)  
25. 5M-6214 C [1] PLUG  
    (Used Without Water Cooled Manifold)
  6L-3616 [1] CONNECTOR  
    (Used With Water Cooled Manifold)
26. 3N-2442 C [1] TUBE ASSEM.  
27. 5K-9243 C [1] ELBOW  
    (Used With Water Cooled Manifold)
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0882S0101
 

3N-3269: TANK GP-EXPANSION

3N3269 EXPANSION TANK GROUP--Type 2
FOR USE WITH OR WITHOUT HEAT EXCHANGER
FOR USE WITH 3N2850 WATER PUMP GROUP AND 3N3279 OR 3N4926 HOUSING AND REGULATOR GROUPS
SHOWN ON PAGES 48 AND 54. AN ATTACHMENT
c217606 UEG0882S
3N3269 TANK GP-EXPANSION Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1143 C [2] BOLT 6.35 cm(2.50 in.) long  
2. 5B-1345 C [2] CLIP  
3. 5P-1420 H HOSE 111.7 cm(44 in.)  
4. 0S-1615 [6] BOLT  
  5P-0537 C [6] WASHER  
5. 6L-8700 [1] CLAMP  
6. 6L-8617 [1] CAP  
7. 8L-3934 [1] NECK ASSEM.  
8. 4L-7636 [1] GASKET  
9. 6B-0041 [1] COVER  
10. 6L-6580 [1] GASKET  
11. 0S-0509 C [2] BOLT  
12. 1A-2029 C [5] BOLT 2.9 cm(1.125 in.) long  
13. 0S-1595 [2] BOLT  
14. 6N-7845 C [1] BRACKET ASSEM.  
15. 6L-5567 [2] GASKET  
16. 3N-1439 [1] ELBOW  
17. 0T-0065 C [1] BOLT 8.89 cm(3.50 in.) long  
18. 5P-1262 H HOSE 6.09 cm(2.4 in.)  
19. 9M-7959 [4] CLAMP  
20. 2B-0947 C [2] BOLT  
21. 3N-4188 [1] TANK ASSEM.  
22. 1S-4662 [1] ELBOW  
23. 0S-1619 C [1] BOLT  
24. 5P-1262 H HOSE 7.62 cm(3 in.)  
25. 6L-3616 [1] CONNECTOR  
26. 7N-6572 C [1] TUBE ASSEM.  
27. 5K-9243 [1] ELBOW  
    (Used with water cooled manifold)
28. 5M-6214 [1] PLUG  
    (Used without water cooled manifold)
29. 6N-6992 C [1] TUBE ASSEM.  
30. 3B-1915 C [1] BOLT 3.5 cm(1.375 in.)  
  5M-2894 C [1] WASHER  
  4M-1149 C [1] CLIP  
    (Used with aftercooler)
31. 1A-2029 C [1] BOLT 2.9 cm(1.125 in.)  
  5M-2894 C [1] WASHER  
    (Used without aftercooler)
32. 2M-0849 C [4] WASHER  
33. 5M-6213 C [2] PLUG  
34. 5M-2894 C [7] WASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0882S0102
 

3N-3269: TANK GP-EXPANSION

3N3269 EXPANSION TANK GROUP--Type 3
FOR USE WITH OR WITHOUT HEAT EXCHANGER
FOR USE WITH 3N2850 WATER PUMP GROUP AND 3N3279 OR 3N4926 HOUSING AND REGULATOR
GROUPS SHOWN ON PAGES 48 AND 54. AN ATTACHMENT
c224344 UEG0882S
3N3269 TANK GP-EXPANSION Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1143 [2] BOLT 6.35 cm(2.50 in.) long  
2. 5B-1345 [2] CLIP  
3. 5P-1420 H HOSE 111.7 cm(44 in.)  
4. 0S-1615 [6] BOLT  
  5P-0537 [6] WASHER  
5. 6L-8700 [1] CLAMP  
6. 6L-8617 [1] CAP  
7. 8L-3934 [1] NECK ASSEM.  
8. 4L-7636 [1] GASKET  
9. 6B-0041 [1] COVER  
10. 6L-6580 [1] GASKET  
11. 0S-0509 [2] BOLT  
12. 1A-2029 [5] BOLT 2.9 cm(1.125 in.)long  
13. 7B-3235 C [4] BOLT  
14. 6N-7845 [1] BRACKET ASSEM.  
15. 6L-5567 [2] GASKET  
16. 3N-1439 [1] ELBOW  
17. 0T-0065 [1] BOLT 8.89 cm(3.50 in.) long  
18. 5P-1262 H HOSE 6.09 cm(2.4 in.)  
19. 9M-7959 [4] CLAMP  
20. 2B-0947 [2] BOLT  
21. 3N-4188 [1] TANK ASSEM.  
22. 1S-4662 [1] ELBOW  
23. 0S-1619 [1] BOLT  
24. 5P-1262 H HOSE 7.62 cm(3 in.)  
25. 5M-2894 [7] WASHER  
26. 2D-9872 C [1] HOSE ASSEM. 20.3 cm(8 in.)  
27. 3B-6552 C [1] ELBOW  
    (Used with water cooled manifold)
28. 5M-6214 [1] PLUG  
    (Used without water cooled manifold)
29. 6N-6992 [1] TUBE ASSEM.  
30. 3B-1915 [1] BOLT 3.5 cm(1.375 in.)  
  5M-2894 [1] WASHER  
31. 4M-1149 [1] CLIP  
32. 5K-9243 C [1] ELBOW  
33. 6L-3616 C [1] CONNECTOR  
    (Used with aftercooler)
34. 1A-2029 [1] BOLT 2.9 cm(1.125 in.)  
  5M-2894 [1] WASHER  
    (Used without aftercooler)
35. 2M-0849 C [6] WASHER  
36. 5M-6213 [2] PLUG  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETER
 

#UEG0882S0103
 

2P-0662: PUMP GP-WATER

2P662 WATER PUMP GROUP
Serial No. 4B11914-Up
Part of 4N4207 Engine Arrangement listed on Page 13
c235724 UEG0882S
2P0662 PUMP GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 C [2] BOLT  
2. 6N-8190 C [1] GASKET  
3. 4N-6556 [1] SEAL ASSEM.  
4. 8S-7762 [1] RING  
5. 8S-8821 [1] SEAL  
6. 8H-9520 [1] SEAL  
7. 5F-3106 [1] SEAL  
8. 1K-6985 H [1] RETAINER  
9. 8H-9789 H [1] BEARING  
10. 0S-1619 H [1] BOLT  
  3B-4506 H [1] LOCKWASHER  
11. 2P-0660 [1] GEAR ASSEM. (40 teeth)  
    (Includes)
12. 2L-5893 [2] PIN  
13. 6H-3957 H [1] BEARING  
14. 5M-6213 H [1] PLUG  
15. 6N-8413 C [1] HOUSING  
16. 8S-9191 C [2] BOLT  
17. 8N-5929 C [1] COVER  
18. 6N-8411 C [1] IMPELLER  
19. 4L-6454 H [1] BOLT  
20. 1P-9929 H [1] SHAFT  
21. 9M-6527 H [1] WASHER  
22. 5M-2894 C [4] WASHER  
  1W-7051 C [1] REBUILD KIT  
    (Includes Parts Marked H)
  C   INDICATES CHANGE
 

#UEG0882S0104
 

2P-0662: PUMP GP-WATER

2P662 WATER PUMP GROUP
Serial No. 4B7794 to 4B11913 inclusive
Part of 4N4207 Engine Arrangement listed on Page 13
c235723 UEG0882S
2P0662 PUMP GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-3200 [2] BOLT  
2. 2P-0405 [1] GASKET  
3. 4N-6556 C [1] SEAL ASSEM.  
4. 8S-7762 [1] RING  
5. 8S-8821 [1] SEAL  
6. 8H-9520 [1] SEAL  
7. 5F-3106 [1] SEAL  
8. 1K-6985 H [1] RETAINER  
9. 8H-9789 H [1] BEARING  
10. 0S-1619 H [1] BOLT  
  3B-4506 H [1] LOCKWASHER  
11. 2P-0660 [1] GEAR ASSEM. (40 teeth)  
12. 2L-5893 [2] PIN  
13. 6H-3957 H [1] BEARING  
14. 5M-6213 H [1] PLUG  
15. 2P-0671 [1] HOUSING  
16. 8S-9191 C [2] BOLT  
  5M-2894 [2] WASHER  
17. 2P-0404 [1] COVER  
18. 1P-9952 [1] IMPELLER  
19. 4L-6454 H [1] BOLT  
20. 1P-9929 H [1] SHAFT  
21. 9M-6527 H [1] WASHER  
  C   INDICATES CHANGE
 

#UEG0882S0105
 

3N-2850: PUMP GP-WATER

3N2850 WATER PUMP GROUP--With Spline Drive and Side Inlet
Serial No. 4B7794 to 4B13411 inclusive. FOR USE WITH EXPANSION TANK
Also part of 6N1106 and 6N1107 Engine Arrangements listed on Pages 14B and 14C
AN ATTACHMENT
c217622 UEG0882S
3N2850 PUMP GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 C [2] BOLT  
2. 6N-8190 C [1] GASKET  
3. 4N-6556 C [1] SEAL ASSEM.  
4. 8S-7762 [1] RING  
5. 8S-8821 [1] SEAL  
6. 8H-9520 [1] SEAL  
7. 1K-6985 H [1] RETAINER  
8. 5P-0076 CH [1] BOLT  
  3B-4506 H [1] LOCKWASHER  
9. 6H-3957 H [2] BEARING  
10. 2P-0659 [1] GEAR ASSEM. (40 teeth)  
11. 2L-5893 [2] PIN  
12. 5F-3106 [1] SEAL  
13. 5M-6213 H [1] PLUG  
14. 3N-1440 [1] HOUSING  
15. 8S-9191 C [2] BOLT  
16. 2P-0404 [1] COVER  
17. 1P-9952 H [1] IMPELLER  
18. 4L-6454 H [1] BOLT  
  9M-6527 H [1] WASHER  
19. 1P-9929 H [1] SHAFT  
20. 5M-2894 C [4] WASHER  
  C   INDICATES CHANGE
 

#UEG0882S0106
 

3N-2850: PUMP GP-WATER

3N2850 WATER PUMP GROUP--With Spline Drive & Side Inlet
Serial No. 4B13412-Up. FOR USE WITH EXPANSION TANK
Also part of 6N1106 & 6N1107 Engine Arrangements listed on Page 14B & 14C
c237045 UEG0882S
3N2850 PUMP GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [2] BOLT  
2. 6N-8190 [1] GASKET  
3. 4N-6556 [1] SEAL ASSEM.  
4. 8S-7762 [1] RING  
5. 8S-8821 [1] SEAL  
6. 8H-9520 [1] SEAL  
7. 1K-6985 H [1] RETAINER  
8. 5P-0076 H [1] BOLT  
  3B-4506 H [1] LOCKWASHER  
9. 6H-3957 H [2] BEARING  
10. 7N-5186 C [1] GEAR ASSEM. (40 teeth)  
11. 5M-2894 [4] WASHER  
12. 5F-3106 [1] SEAL  
13. 5M-6213 H [1] PLUG  
14. 6N-8412 C [1] HOUSING  
15. 8S-9191 [2] BOLT  
16. 8N-5929 C [1] COVER  
17. 6N-8411 CH [1] IMPELLER  
18. 4L-6454 H [1] BOLT  
  9M-6527 H [1] WASHER  
19. 1P-9929 H [1] SHAFT  
  C   INDICATES CHANGE
 

#UEG0882S0107
 

2P-0661: PUMP GP-WATER

2P661 WATER PUMP GROUP--With Spline Drive and Bottom Inlet--Type 1
AN ATTACHMENT
c209424 UEG0882S
2P0661 PUMP GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-3200 [2] BOLT  
2. 2P-0405 [1] GASKET  
3. 4N-6556 C [1] SEAL ASSEM.  
4. 8S-7762 [1] RING  
5. 8S-8821 [1] SEAL  
6. 8H-9520 [1] SEAL  
7. 1K-6985 H [1] RETAINER  
8. 5P-0076 CH [1] BOLT  
  3B-4506 H [1] LOCKWASHER  
9. 6H-3957 H [2] BEARING  
10. 2P-0659 [1] GEAR ASSEM. (40 teeth)  
11. 2L-5893 [2] PIN  
  6N-9604 C [1] REBUILD KIT  
    (Consists of parts marked h)
12. 5F-3106 [1] SEAL  
13. 5M-6213 H [1] PLUG  
14. 2P-0671 [1] HOUSING  
15. 2P-7557 [2] BOLT 9.53 cm(3.75 in.) long  
    -OR-
  8S-9191 [2] BOLT 10.16 cm(4 in.) long  
  5M-2894 [2] WASHER  
16. 2P-0404 [1] COVER  
17. 1P-9952 H [1] IMPELLER  
18. 4L-6454 H [1] BOLT  
  9M-6527 H [1] WASHER  
19. 1P-9929 H [1] SHAFT  
  C   INDICATES CHANGE
 

#UEG0882S0108
 

2P-0661: PUMP GP-WATER

2P661 WATER PUMP GROUP--With Spline Drive and Bottom Inlet--Type 2
AN ATTACHMENT
c165250 UEG0882S
2P0661 PUMP GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 C [2] BOLT  
2. 6N-8190 C [1] GASKET  
3. 4N-6556 [1] SEAL ASSEM.  
4. 8S-7762 [1] RING  
5. 8S-8821 [1] SEAL  
6. 8H-9520 [1] SEAL  
7. 1K-6985 H [1] RING  
8. 5P-0076 H [1] BOLT  
  3B-4506 H [1] LOCKWASHER  
9. 6H-3957 H [2] BEARING  
10. 2P-0659 [1] GEAR ASSEM. (40 teeth)  
11. 2L-5893 [2] PIN  
12. 5F-3106 [1] SEAL  
13. 5M-6213 H [1] PLUG  
14. 6N-8413 C [1] HOUSING  
15. 8S-9191 [2] BOLT  
16. 2P-0404 [1] COVER  
17. 6N-8411 HC [1] IMPELLER  
18. 4L-6454 H [1] BOLT  
  9M-6527 H [1] WASHER  
19. 1P-9929 H [1] SHAFT  
20. 5M-2894 C [4] WASHER  
  7N-4663 C [1] REBUILD KIT  
    (Consists of parts marked H)
  C   INDICATES CHANGE
 

#UEG0882S0109
 

3N-4927: PUMP GP-AUXILIARY

3N4927 AUXILIARY PUMP GROUP--Sea Water
AN ATTACHMENT
c117790 UEG0882S
3N4927 PUMP GP-AUXILIARY Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-3229 Y [1] PUMP GROUP  
    (Separate Illustration)
2. 3H-6622 [4] BOLT  
  5M-2894 [4] WASHER  
3. 2L-9714 [2] FLANGE  
4. 6L-5827 [2] GASKET  
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Cooling System Pressure Cap<BR> (6L8617)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Expansion Tank And Heat Exchanger
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Expansion Tank And Heat Exchanger
3304 & 3306 INDUSTRIAL & MARINE ENGINES

Caterpillar Parts SIS Catalog 3304 :

COVER GP-EXPANSION TANK
3N-4924 COVER GP-EXPANSION TANK
LINES GP-WATER
2P-7740 LINES GP-WATER
COVER GP-EXPANSION TANK
3N-4924 COVER GP-EXPANSION TANK
LINES GP-WATER
2P-7740 LINES GP-WATER
LINES GP-WATER
2P-7728 LINES GP-WATER
LINES GP-WATER
3N-3914 LINES GP-WATER
LINES GP-WATER
3N-4921 LINES GP-WATER
LINES GP-AUXILIARY
3N-4920 LINES GP-AUXILIARY
TANK GP-EXPANSION
3N-3269 TANK GP-EXPANSION
TANK GP-EXPANSION
3N-3269 TANK GP-EXPANSION
PUMP GP-WATER
2P-0662 PUMP GP-WATER
PUMP GP-WATER
2P-0662 PUMP GP-WATER
PUMP GP-WATER
3N-2850 PUMP GP-WATER
PUMP GP-WATER
3N-2850 PUMP GP-WATER
PUMP GP-WATER
2P-0661 PUMP GP-WATER
PUMP GP-WATER
2P-0661 PUMP GP-WATER

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.