AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5N5997 FLEXIBLE FUEL OIL LINES GROUP FOR USE WITH 5N5284 SEPARATOR GROUP SHOWN ON PAGES 91A THROUGH 91D AN ATTACHMENT 3304


FUEL SYSTEM
LINES GP-FUEL
PUMP GP-FUEL TRANSFER
FILTER GP-FUEL
PUMP GP-FUEL PRIMING
SEPARATOR GP-WATER

INDUSTRIAL ENGINE 3304 INDUSTRIAL ENGINE 04B
 3304 INDUSTRIAL ENGINE 04B07794-14448 UEG0882S 3304 04B   (1968)

FUEL SYSTEM

LINES GP-FUEL
LINES GP-FLEXIBLE FUEL
3N-8099 LINES GP-FLEXIBLE FUEL
LINES GP-FLEXIBLE FUEL
5N-5997 LINES GP-FLEXIBLE FUEL
FUEL INJECTION VALVE AND LINES GROUP
4N-5670 FUEL INJECTION VALVE AND LINES GROUP
FUEL INJECTION VALVES AND LINES GROUP
4N-5670 FUEL INJECTION VALVES AND LINES GROUP
LINES GP-FUEL INJECTION
7N-3652 LINES GP-FUEL INJECTION
FUEL INJECTION VALVES AND LINES GROUP
6N-1112 FUEL INJECTION VALVES AND LINES GROUP
FUEL INJECTION LINES GROUP
3N-8336 FUEL INJECTION LINES GROUP
FUEL INJECTION LINES GROUP
3N-8336 FUEL INJECTION LINES GROUP
LINES GP-FUEL INJECTION
7N-8065 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7N-3461 LINES GP-FUEL INJECTION
 

#UEG0882S0250
 

5N-5997: LINES GP-FLEXIBLE FUEL

5N5997 FLEXIBLE FUEL OIL LINES GROUP
FOR USE WITH 5N5284 SEPARATOR GROUP SHOWN ON PAGES 91A THROUGH 91D
AN ATTACHMENT
c225551 UEG0882S
5N5997 LINES GP-FLEXIBLE FUEL Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 032-1268 [1] ELBOW  
2. 5N-5981 [1] HOSE ASSEM. 114 cm(45 in.)  
3. 3N-8098 [1] HOSE ASSEM. 91.4 cm(35.98 in.)  
 

#UEG0882S0251
 

8N-3569: PUMP GP-FUEL

8N3569 FUEL PUMP GROUP--Boost--24 Volt--Field Installation
Provides positive Pressure to the sleeve metering fuel system components on the
suction side of the fuel transfer pump
UEG0882S0251 UEG0882S
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8H-4681 Y [1] PRIMARY FUEL FILTER GROUP  
  6N-0006 [1] FUEL PUMP ASSEMBLY  
  Y   SEPARATE ILLUSTRATION
 

#UEG0882S0252
 

9N-5458: PUMP GP-FUEL

9N5458 ELECTRICAL FUEL PUMP GROUP--Boost--12 Volt--Field Installation
c221653 UEG0882S
9N5458 PUMP GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-4681 Y [1] FILTER GP-PRIMARY FUEL  
2. 9N-5459 [1] PUMP AS-FUEL  
  Y   SEPARATE ILLUSTRATION
 

#UEG0882S0253
 

8H-4681: FILTER GP-PRIMARY FUEL

8H4681 PRIMARY FUEL FILTER GROUP--Type 1
Part of 9N5458 & 8N3569 Electrical Fuel Pump Groups shown on Page 90C
c225778 UEG0882S
8H4681 FILTER GP-PRIMARY FUEL Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-2778 [1] GASKET  
2. 7H-9680 [1] COVER-FILTER  
3. 8N-4410 C [1] WASHER-SEALING  
4. 8H-2807 [1] NUT  
5. 1L-3769 [1] RING-RETAINING  
6. 7S-9323 [1] SPRING  
7. 2H-3429 [1] RING-RETAINING  
8. 7H-9678 [1] RETAINER-ELEMENT  
9. 8H-2810 [1] CASE AS-FILTER  
10. 9M-2341 [1] ELEMENT AS (WASHABLE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0882S0254
 

8H-4681: FILTER GP-PRIMARY FUEL

8H4681 PRIMARY FUEL FILTER GROUP--Type 2
Part of 9N5458 & 8N3569 Fuel Pump Groups shown on Page 90C
c233223 UEG0882S
8H4681 FILTER GP-PRIMARY FUEL Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-2778 [1] GASKET  
2. 1N-3583 C [1] BASE-FUEL FILTER  
3. 2J-0157 C [1] SEAL-O-RING  
4. 7N-1628 C [1] NUT  
5. 1L-3769 [1] RING-RETAINING  
6. 7S-9323 [1] SPRING  
7. 2H-3429 [1] RING-RETAINING  
8. 7H-9678 [1] RETAINER-ELEMENT  
9. 8H-2810 [1] CASE AS-FILTER  
10. 9M-2341 [1] ELEMENT AS (WASHABLE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0882S0255
 

4N-4314: PUMP GP-FUEL PRIMING

4N4314 FUEL PRIMING PUMP GROUP
Part of 4N4207 Engine Arrangement listed on Page 13
c210119 UEG0882S
4N4314 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-5514 C [1] BOLT  
  9M-1974 C [2] WASHER (use as required)  
2. 1P-0436 [1] GASKET  
3. 9F-7022 C [1] BOLT  
  5P-0537 [1] WASHER  
4. 4N-2511 [1] PUMP ASSEM.  
  C   INDICATES CHANGE
 

#UEG0882S0256
 

7N-0950: SEPARATOR GP-WATER

7N950 WATER SEPARATOR GROUP
Replaced by 9N6519 shown on Page 91A
AN ATTACHMENT
c227370 UEG0882S
7N0950 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7618 [1] CLAMP-RETAINING  
2. 6N-7624 [1] BASE-SEPARATOR  
3. 2P-4173 C [2] COCK-DRAIN  
4. 5M-6213 [2] PLUG  
5. 6N-7617 [1] ELEMENT  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0882S0257
 

9N-6519: SEPARATOR GP-WATER

9N6519 WATER SEPARATOR GROUP
AN ATTACHMENT
c228664 UEG0882S
9N6519 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9802 [1] CLAMP-RETAINING  
2. 8N-9801 [1] BASE-SEPARATOR  
3. 6V-2611 [2] VALVE  
4. 3K-8460 [2] PLUG  
5. 8N-9803 [1] ELEMENT  
6. 5P-4675 [2] ADAPTER  
7. 1J-9671 [6] SEAL-O-RING  
 

#UEG0882S0258
 

5N-5284: SEPARATOR GP-WATER

5N5284 WATER SEPARATOR GROUP--Type 1
AN ATTACHMENT
c222917 UEG0882S
5N5284 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4173 [2] COCK  
2. 6N-7624 [1] BASE  
3. 032-1268 [2] ELBOW  
4. 6N-7617 [1] ELEMENT  
5. 7N-3761 [1] HOSE 30 cm (12 in.)  
6. 032-1267 [1] CONNECTOR  
7. 5N-5283 [1] BRACKET  
8. 5M-6213 [1] PLUG  
9. 5P-1442 H HOSE 72 cm (28 in.)  
  3S-5096 [1] CLAMP  
10. 1A-2029 [2] BOLT  
  1D-4717 [2] NUT  
  5M-2894 [4] WASHER  
11. 6N-7618 [1] CLAMP  
  H   ORDER BY THE CENTIMETER
 

#UEG0882S0259
 

5N-5284: SEPARATOR GP-WATER

5N5284 WATER SEPARATOR GROUP--Type 2
AN ATTACHMENT
c176704 UEG0882S
5N5284 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7618 [1] CLAMP  
2. 032-1268 [2] ELBOW  
3. 2G-7552 C [1] HOSE ASSEM. (not serviced)  
    For Service Furnish:
  2P-5943 G HOSE 10.63 in.(27 cm)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
4. 032-1267 [1] CONNECTOR  
5. 1D-4717 [2] NUT  
6. 5M-2894 [4] WASHER  
7. 5N-5283 [1] BRACKET  
8. 1A-2029 [2] BOLT  
9. 5P-7833 C [2] VALVE  
10. 6N-7624 [1] BASE  
11. 5M-6213 [1] PLUG  
12. 6N-7617 [1] ELEMENT  
13. 5P-5991 CD HOSE .72 m(28 in.)  
  6L-8700 C [1] CLAMP  
14. 030-7765 C [1] NIPPLE  
15. 5B-1309 C [1] COUPLING  
  D   ORDER BY THE METER
  G   ORDER BY THE INCH
  C   INDICATES CHANGE
 

Information:

Engine News
Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank
1979/03/07
New Fuel Injection Nozzle Assembly Used
1980/01/23
New Fuel Injection Lines And Clamps Prevent Stresses And Contact Which Can Cause Leakage
1980/03/12
Improvements Made To Water Separator Groups
1980/04/30
Use Only Caterpillar Water Separator Elements
1980/10/01
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Improved Water Separator Group Used
1982/06/16
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Manufacturing And Design Improvements Incorporated Into Fuel Injection Nozzle Assemblies{1252,1307}
1997/07/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Needle Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{1250,0782}
1999/04/01
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line
1977/09/28
Water Separators Needed On Engines In The Field With SMFS
1977/12/14
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage
1978/04/19
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Disassembly and Assembly
Fuel Injection Valves
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
New Fuel Injection Lines And Clamps Prevent Stresses And Contact Which Can Cause Leakage{1252}
1980/03/24
Improvements Made To Water Separator Groups{1263}
1980/05/05
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Improved Water Separator Group Used {1263}
1982/05/31
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank{1275,1253,1274}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14

Caterpillar Parts SIS Catalog 3304 :

LINES GP-FLEXIBLE FUEL
3N-8099 LINES GP-FLEXIBLE FUEL
FUEL TANK & BASE GP
8N-7155 FUEL TANK & BASE GP
BASE & FUEL TANK GP
5N-2142 BASE & FUEL TANK GP
BASE & FUEL TANK GP
5N-2142 BASE & FUEL TANK GP
TANK & BASE GP-FUEL
3N-8066 TANK & BASE GP-FUEL
TANK & BASE GP-FUEL
3N-8066 TANK & BASE GP-FUEL
TANK & BASE GP-FUEL
3N-8065 TANK & BASE GP-FUEL
TANK & BASE GP-FUEL
3N-8065 TANK & BASE GP-FUEL
8N-3569 PUMP GP-FUEL
PUMP GP-FUEL
9N-5458 PUMP GP-FUEL
FILTER GP-PRIMARY FUEL
8H-4681 FILTER GP-PRIMARY FUEL
FILTER GP-PRIMARY FUEL
8H-4681 FILTER GP-PRIMARY FUEL
PUMP GP-FUEL PRIMING
4N-4314 PUMP GP-FUEL PRIMING
SEPARATOR GP-WATER
7N-0950 SEPARATOR GP-WATER
SEPARATOR GP-WATER
9N-6519 SEPARATOR GP-WATER
SEPARATOR GP-WATER
5N-5284 SEPARATOR GP-WATER

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.