AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N251 FUEL INJECTION PUMP AND GOVERNOR GROUP--Part 1 of 2--Type 1 Serial No. 4B7794 to 4B13905 inclusive Part of 6N2826, 6N2827, 6N291 and 6N292 Fuel Injection Pump and Governor Groups shown on Pages 92C and 93 3304


FUEL SYSTEM
GOVERNOR GP

INDUSTRIAL ENGINE 3304 INDUSTRIAL ENGINE 04B
 3304 INDUSTRIAL ENGINE 04B07794-14448 UEG0882S 3304 04B   (1968)

FUEL SYSTEM

GOVERNOR GP
FUEL INJECTION PUMP AND GOVERNOR GROUP
6N-0292 FUEL INJECTION PUMP AND GOVERNOR GROUP
FUEL INJECTION PUMP AND GOVERNOR GROUP
6N-0292 FUEL INJECTION PUMP AND GOVERNOR GROUP
GOV & FUEL INJ PUMP GP
6N-0251 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0251 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0251 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0251 GOV & FUEL INJ PUMP GP
 

#UEG0882S0280
 

6N-0251: GOV & FUEL INJ PUMP GP

6N251 FUEL INJECTION PUMP AND GOVERNOR GROUP--Part 1 of 2--Type 1
Serial No. 4B7794 to 4B13905 inclusive
Part of 6N2826, 6N2827, 6N291 and 6N292 Fuel Injection Pump and Governor Groups shown on Pages 92C and 93
c203228 UEG0882S
6N0251 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2820 [1] LEVER ASSEM.  
    (Includes)
2. 7L-4993 [1] DOWEL  
3. 3N-2822 [1] LEVER  
4. 3N-2815 [1] SHAFT  
5. 9F-1707 [1] BOLT  
6. 3N-2824 [1] LEVER ASSEM.  
    (Includes)
7. 6N-0265 [1] DOWEL  
8. 6N-0242 [1] COVER  
  4N-0403 [1] GASKET  
9. 2A-0762 [2] BOLT  
10. 9F-7022 [1] BOLT  
11. 4N-5490 [1] BASE ASSEM.  
    (Includes)
12. 9S-4167 [1] STUD  
13. 4N-4581 [1] GASKET  
14. 9F-6580 [2] BOLT  
15. 4N-9336 [1] DISC  
16. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
17. 0S-1615 [11] BOLT  
18. 8S-4710 [1] BOLT  
19. 6D-0238 [1] VALVE ASSEM.  
20. 4N-4430 [1] CHANNEL  
  4N-4431 [1] GASKET  
21. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
22. 4N-9181 [1] VALVE  
  5F-0229 [1] SPRING  
23. 4N-4350 [1] COVER  
  4N-9056 [1] GASKET  
24. 9L-5914 [1] WASHER  
25. 6N-0248 [1] SHAFT ASSEM.  
26. 4N-0159 [1] GASKET  
27. 2N-2658 [1] BOLT  
28. 3N-2831 [1] ADAPTER ASSEM.  
    (Includes)
29. 4N-9467 [2] BEARING  
30. 3N-2813 [1] SEAL  
 

#UEG0882S0281
 

6N-0251: GOV & FUEL INJ PUMP GP

6N251 FUEL INJECTION PUMP AND GOVERNOR GROUP--Part 2 of 2--Type 1
Serial No. 4B7794 to 4B13905 inclusive
Part of 6N2826, 6N2827, 6N291 and 6N292 Fuel Injection Pump and Governor Groups shown on Pages 92C and 93
4N6550 Fuel Injection Pump parts are shown on Pages 96 through 99D-4
c203229 UEG0882S
6N0251 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-8507 [2] COVER  
  4N-0117 [2] GASKET  
2. 2A-0762 [6] BOLT  
3. 3L-5987 [1] COVER  
4. 6L-5773 [1] GASKET  
5. 4N-0444 [2] SPACER  
6. 2P-0726 [1] SPRING  
7. 4N-8179 [1] PIN  
8. 6B-4198 [1] BOLT  
9. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL  
10. 3N-2832 [1] GASKET  
11. 3N-2826 [1] BASE  
12. 0S-1615 [3] BOLT  
13. 4N-5658 [1] PLUG  
14. 8F-6302 [1] BOLT  
15. 4N-0609 [1] COVER  
16. 4F-7957 [2] BOLT  
17. 5M-6214 [1] PLUG  
18. 4N-0610 [1] DIAPHRAGM  
19. Y [1] FUEL INJECTION PUMP  
    (Separate Illustration)
  Y   SEPARATE ILLUSTRATION
 

#UEG0882S0282
 

6N-0251: GOV & FUEL INJ PUMP GP

6N251 FUEL INJECTION PUMP AND GOVERNOR GROUP--Part 1 of 2--Type 2
Serial No. 4B7794 to 4B13905 inclusive
Part of 6N2826, 6N2827, 6N291 and 6N292 Fuel Injection Pump and Governor Groups shown on Pages 92C, 92D and 93
c158448 UEG0882S
6N0251 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2820 [1] LEVER ASSEM.  
    (Includes)
2. 7L-4993 [1] DOWEL  
3. 3N-9633 C [1] LEVER ASSEM.  
    (Includes)
  5H-8985 [1] PIN  
4. 3N-2815 [1] SHAFT  
5. 9F-1707 [1] BOLT  
6. 3N-2824 [1] LEVER ASSEM.  
    (Includes)
7. 6N-0265 [1] DOWEL  
8. 6N-0248 [1] SHAFT ASSEM.  
9. 4N-0159 [1] GASKET  
10. 9F-7022 [1] BOLT  
11. 4N-5490 [1] BASE ASSEM.  
    (Includes)
12. 9S-4167 [1] STUD  
13. 6N-2843 C [1] GASKET  
14. 9F-6580 [2] BOLT  
15. 4N-9336 [1] DISC  
16. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
17. 0S-1615 [11] BOLT  
18. 8S-4710 [1] BOLT  
19. 6D-0238 [1] VALVE ASSEM.  
20. 6N-2810 C [1] CHANNEL  
  4N-4431 [1] GASKET  
21. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
22. 2N-2658 [1] BOLT  
23. 4N-4350 [1] COVER  
  4N-9056 [1] GASKET  
24. 6N-7375 C [1] ADAPTER ASSEM.  
    (Includes)
25. 4N-9467 [2] BEARING  
26. 3N-2813 [1] SEAL  
  C   INDICATES CHANGE
 

#UEG0882S0283
 

6N-0251: GOV & FUEL INJ PUMP GP

6N251 FUEL INJECTION PUMP AND GOVERNOR GROUP--Part 2 of 2--Type 2
Serial No. 4B7794 to 4B13905 inclusive
Part of 6N2826, 6N2827, 6N291 and 6N292 Fuel Injection Pump and Governor Groups shown on Pages 92C, 92D and 93
4N6550 Pump parts are shown on Pages 96 through 99D-4
c158449 UEG0882S
6N0251 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-8507 [2] COVER  
  4N-0117 [2] GASKET  
2. 2A-0762 [6] BOLT  
3. 3L-5987 [1] COVER  
4. 6L-5773 [1] GASKET  
5. 4N-0444 [2] SPACER  
6. 9S-8597 C [1] SPRING  
7. 4N-8179 [1] PIN  
8. 4L-3776 C [1] BOLT  
9. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL  
10. 6N-6597 C [1] GASKET  
11. 6N-6994 C [1] BASE  
12. 0S-1615 C [1] BOLT  
13. 4N-5658 [1] PLUG  
14. 8F-6302 [1] BOLT  
15. 6N-5933 C [1] COVER  
16. 4F-7957 C [3] BOLT  
17. 0S-1616 C [2] BOLT  
  2S-4652 C [2] WASHER  
18. 4N-6550 YC [1] FUEL INJECTION PUMP GROUP  
    (Separate Illustration)
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0882S0284
 

6N-0251: GOV & FUEL INJ PUMP GP

6N251 FUEL INJECTION PUMP AND GOVERNOR GROUP--Part 1 of 2--Type 3
Serial No. 4B13906-Up
Part of 6N2826, 6N2827, 6N291 & 6N292 Fuel Injection Pump & Governor Groups
shown on Pages 92C, 92D and 93
c217612 UEG0882S
6N0251 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2820 [1] LEVER ASSEM.  
3. 3N-9633 [1] LEVER ASSEM.  
    (Includes)
  5H-8985 [1] PIN  
4. 3N-2815 [1] SHAFT  
5. 9F-1707 [1] BOLT  
6. 3N-2824 [1] LEVER ASSEM.  
    (Includes)
7. 6N-0265 [1] DOWEL  
8. 6N-0248 [1] SHAFT ASSEM.  
9. 4N-0159 [1] GASKET  
10. 9F-7022 [1] BOLT  
11. 4N-5490 [1] BASE ASSEM.  
    (Includes)
12. 9S-4167 [1] STUD  
13. 6N-2843 [1] GASKET  
14. 9F-6580 [2] BOLT  
15. 4N-9336 [1] DISC  
16. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
17. 0S-1615 [11] BOLT  
18. 8S-4710 [1] BOLT  
19. 7N-0450 C [1] VALVE ASSEM.  
20. 6N-2810 [1] CHANNEL  
  4N-4431 [1] GASKET  
21. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
22. 2N-2658 [1] BOLT  
23. 4N-4350 [1] COVER  
  4N-9056 [1] GASKET  
24. 7N-3094 C [1] ADAPTER ASSEM.  
    (Includes)
25. 4N-9467 [2] BEARING  
26. 3N-2813 [1] SEAL  
  C   INDICATES CHANGE
 

#UEG0882S0285
 

6N-0251: GOV & FUEL INJ PUMP GP

6N251 FUEL INJECTION PUMP AND GOVERNOR GROUP--Part 2 of 2--Type 3
Serial No. 4B13906-Up
Part of 6N2826, 6N2827, 6N291 and 6N292 Fuel Injection Pump & Governor Groups shown on
Pages 92C, 92D & 93. 4N6550 Pump parts are shown on Pages 95 through 99D-4
c217613 UEG0882S
6N0251 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-8507 [2] COVER  
  4N-0117 [2] GASKET  
2. 2A-0762 [6] BOLT  
3. 3L-5987 [1] COVER  
4. 6L-5773 [1] GASKET  
5. 4N-0444 [2] SPACER  
6. 9S-8597 [1] SPRING  
7. 4N-8179 [1] PIN  
8. 4L-3776 [1] BOLT  
9. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL  
10. 6N-6597 [1] GASKET  
11. 7N-3096 C [1] BASE  
12. 0S-1615 [1] BOLT  
13. 9S-9332 C [1] FITTING  
14. 8F-6302 [1] BOLT  
15. 6N-5933 [1] COVER  
16. 4F-7957 [3] BOLT  
17. 0S-1616 [2] BOLT  
  6N-7523 C [2] WASHER  
18. 4N-6550 Y [1] FUEL INJECTION PUMP GROUP  
    (Separate Illustration)
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0882S0286
 

4N-6550: GOV & FUEL INJ PUMP GP

4N6550 FUEL INJECTION PUMP AND GOVERNOR--Part 1 of 4--Type 1
Part of 6N251 & 6N7820 Fuel Injection Pump and Governor Groups shown on Pages 95, 95B, 95D & 99F
4N6548 Camshaft parts are shown on Page 100. AN ATTACHMENT
c154286 UEG0882S
4N6550 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6547 [1] HOUSING ASSEM.  
    (Includes)
2. 4N-2333 [1] DOWEL  
3. 8S-6814 [2] DOWEL  
4. 5M-6214 [1] PLUG  
5. 4N-0260 [2] SEAL  
6. 6N-2578 C [1] BEARING  
7. 4N-2786 [1] SEAL  
8. 4N-6402 [1] GUIDE  
9. 4N-1723 [1] SHIELD  
10. 4N-2927 [2] RACE  
11. 6N-4655 C [1] DASHPOT ASSEM.  
  4N-6403 [1] SEAT  
12. 4N-6407 [1] SPOOL  
13. 4N-6406 [1] RING  
14. 4N-6404 [1] RING  
15. 4N-2953 [1] RING  
16. 4N-2401 [1] BEARING  
17. 4N-0434 [1] RISER  
18. Y [1] CAMSHAFT  
    (Separate Illustration)
20. 4N-0927 [1] SHAFT ASSEM.  
21. 5M-6509 [1] SEAL  
22. 4N-0406 [1] GEAR (10 teeth)  
23. 4N-1131 [1] BODY ASSEM.  
    (Includes)
24. 8H-9804 [1] SHAFT  
25. 4N-0636 [1] SEAL  
26. 4N-1584 [1] SEAL  
27. 8S-6814 [1] DOWEL  
29. 4N-3779 [1] KEY  
30. 4N-0429 [1] GEAR (15 teeth)  
31. 4N-0527 [1] SPRING  
33. 4N-0436 [1] SEAT  
34. 4N-0507 [1] SHAFT ASSEM.  
    (Includes)
  [1] SHAFT  
  4N-9464 [1] LEVER  
  [1] SPRING  
  [1] LEVER ASSEM.  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0882S0287
 

4N-6550: GOV & FUEL INJ PUMP GP

4N6550 FUEL INJECTION PUMP AND GOVERNOR GROUP--Part 2 of 4--Type 1
Part of 6N251 & 6N7820 Fuel Injection Pump and Governor Groups shown on Pages 95, 95B, 95D & 99F
AN ATTACHMENT
c223912 UEG0882S
4N6550 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-5484 [1] VALVE  
2. 4N-5485 [1] BODY  
3. 6H-9691 [1] SEAL  
4. 6N-1346 [1] HOUSING ASSEM.  
    (Includes)
5. 4N-2333 [1] PIN  
6. 4N-1826 [1] DOWEL  
  2D-6392 [1] SEAL  
7. 4N-2334 [4] PIN  
8. 1P-2298 [1] VALVE ASSEM.  
9. 6N-0343 [1] STUD  
10. 6N-1078 C [1] BEARING  
11. 8N-0628 C [1] BEARING  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-0009 [1] COVER  
  4N-0049 [1] GASKET  
17. 1P-9925 [1] BOLT  
  2S-4652 [1] WASHER  
18. 4N-0594 [1] GASKET  
19. 0S-1616 [2] BOLT 2.54 cm(1 in.) long  
  1P-9925 C [1] BOLT 6.35 cm(2.50 in.) long  
  3B-8695 [1] BOLT 8.89 cm(3.50 in.) long  
  2A-4781 [1] BOLT 6.99 cm(2.75 in.) long  
20. 9S-8632 [1] SPRING  
  4N-0116 [1] GUIDE  
21. 4N-6430 [1] PIN  
22. 5F-9144 [1] SEAL  
23. 5J-5314 [4] BOLT  
  C   INDICATES CHANGE
 

#UEG0882S0288
 

4N-6550: GOV & FUEL INJ PUMP GP

4N6550 FUEL INJECTION PUMP AND GOVERNOR GROUP--Part 3 of 4--Type 1
Part of 6N251 & 6N7820 Fuel Injection Pump and Governor Groups shown on
Pages 95, 95B, 95D & 99F. AN ATTACHMENT
c203234 UEG0882S
4N6550 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [4] BONNET  
2. 4N-0218 [4] BUSHING  
3. 4N-2655 [4] VALVE  
  9L-9424 [4] SPRING  
4. 4N-0224 [4] RING  
5. 4N-1765 [4] PLUNGER & BARREL ASSEM.  
6. 4N-4318 [4] SPRING  
7. 4N-2728 [4] WASHER  
8. 4N-1750 [4] LIFTER  
  4N-2685 [4] ROLLER  
9. 2N-2658 [4] SCREW  
10. 4N-1763 [4] LEVER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 3H-0442 [1] SEAL  
15. 4N-0508 [1] GASKET  
16. 4N-1591 [1] COVER ASSEM.  
    (Includes)
  4N-0506 [1] COVER  
17. 4N-1594 [1] MACHINE SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER (.06 in. thick)  
  8F-1326 [1] WASHER (.032 in. thick)  
18. 2M-5471 [2] BOLT  
19. 2P-3200 [1] BOLT  
  1J-9671 [1] SEAL  
20. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
21. 4N-0445 [1] LEVER  
 

#UEG0882S0289
 

4N-6550: GOV & FUEL INJ PUMP GP

4N6550 FUEL INJECTION PUMP AND GOVERNOR GROUP--Part 4 of 4--Type 1
Part of 6N251 and 6N7820 Fuel Injection Pump and Governor Groups shown on Pages 95, 95B, 95D & 99F
AN ATTACHMENT
c159634 UEG0882S
4N6550 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1881 [1] LEVER  
2. 4N-0448 [1] LEVER ASSEM.  
    (Includes)
  9L-8571 [1] DOWEL  
3. 8F-5368 [1] WASHER  
4. 9S-8601 [1] PIN  
5. 4N-1767 [1] VALVE  
6. 4N-0605 [1] SPRING  
7. 4N-0613 [2] PLATE  
9. 4N-0687 [1] COVER ASSEM.  
    (Includes)
10. 4N-2786 C [1] SEAL  
12. 0S-1616 [4] BOLT  
13. 4N-0402 [1] GASKET  
  C   INDICATES CHANGE
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet
1979/08/22
Improvements Made To Fuel Injection Pump And Governor Group
1979/11/28
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Explanation Of Differences In Timing Advance Information
1981/08/26
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals
1981/09/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Seal Used On Governor Control Shaft
1982/12/15
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Governor Control Cover Assembly Includes New Seal And Improved Cover{1264}
1997/07/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
A New Exhaust Manifold And Fuel Pump Heat Shield Is Used On Industrial Engines That Have A Woodward Governor With An Electric Motor
1978/07/05
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Equipment
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (4N4864)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (7L543 and 2N8603)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governors
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Output Shaft Governor<BR> (8L8661)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Equipment
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Adjustable &quot;Dashpot&quot;<BR> (Close Regulation Type Governor)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel System Timing<BR> (Engines With Timing Pointer)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance Unit
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor<BR> (8N6774)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor Control
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Transfer Pump
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Adapter Housing And Levers
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Check Valve And Bypass Valve
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
A New Exhaust Manifold And Fuel Pump Heat Shield Is Used On Industrial Engines That Have A Woodward Governor With An Electric Motor{1059,1250,1289}
1978/05/29
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Tachometer Drive Adapter Has Increased Service Life{7462,1288}
1979/01/22
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog 3304 :

FUEL INJECTION PUMP AND GOVERNOR GROUP
6N-0292 FUEL INJECTION PUMP AND GOVERNOR GROUP
FUEL INJECTION PUMP AND GOVERNOR GROUP
6N-0292 FUEL INJECTION PUMP AND GOVERNOR GROUP
FUEL INJECTION PUMP AND GOVERNOR GROUP
6N-0291 FUEL INJECTION PUMP AND GOVERNOR GROUP
FUEL INJECTION PUMP AND GOVERNOR GROUP
6N-0291 FUEL INJECTION PUMP AND GOVERNOR GROUP
FUEL INJECTION PUMP AND GOVERNOR GROUP
6N-2827 FUEL INJECTION PUMP AND GOVERNOR GROUP
FUEL INJECTION PUMP AND GOVERNOR GROUP
6N-2827 FUEL INJECTION PUMP AND GOVERNOR GROUP
FUEL INJECTION PUMP AND GOVERNOR GROUP
6N-2826 FUEL INJECTION PUMP AND GOVERNOR GROUP
GAUGE GP-FUEL
8N-6820 GAUGE GP-FUEL
GOV & FUEL INJ PUMP GP
6N-0251 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0251 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0251 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0251 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0251 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-6550 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-6550 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-6550 GOV & FUEL INJ PUMP GP

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.