AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N6557 CAMSHAFT ASSEMBLY--Type 1 Part of 4N6550 Fuel Injection Pump and Governor Group shown on Pages 99A & 99D-1. AN ATTACHMENT 3304


FUEL SYSTEM
PUMP GP-FUEL INJECTION
CONTROL GP-FUEL RATIO
PUMP GP-FUEL INJECTION
GOVERNOR GP
CONTROL GP-FUEL RATIO
GOVERNOR GP

INDUSTRIAL ENGINE 3304 INDUSTRIAL ENGINE 04B
 3304 INDUSTRIAL ENGINE 04B07794-14448 UEG0882S 3304 04B   (1968)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
GOV & FUEL INJ PUMP GP
6N-6268 GOV & FUEL INJ PUMP GP
CAMSHAFT ASSEMBLY
4N-6548 CAMSHAFT ASSEMBLY
CAMSHAFT AS
6N-6557 CAMSHAFT AS
CAMSHAFT AS
6N-6557 CAMSHAFT AS
GOV & FUEL INJ PUMP GP
6N-6211 GOV & FUEL INJ PUMP GP
6N-7605 GOV & FUEL INJ PUMP GP
 

#UEG0882S0310
 

6N-6557: CAMSHAFT AS

6N6557 CAMSHAFT ASSEMBLY--Type 1
Part of 4N6550 Fuel Injection Pump and Governor Group shown on
Pages 99A & 99D-1. AN ATTACHMENT
c159366 UEG0882S
6N6557 CAMSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9018 [1] SHAFT  
2. 4N-5524 [3] WEIGHT  
3. 4N-1723 [1] SHIELD  
4. 4N-0511 [3] DOWEL  
5. 4N-0446 [1] CARRIER  
6. 4N-9019 [1] DOWEL  
7. 6N-6567 [1] CAMSHAFT  
8. 4N-2955 [3] BOLT  
 

#UEG0882S0311
 

6N-4654: CONTROL GP-FUEL RATIO

6N4654 FUEL RATIO CONTROL GROUP
Part of 6N6268 & 6N253 Governor and Fuel Injection Pump Groups shown on
Pages 99J-1 & 103
c213636 UEG0882S
6N4654 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5764 [1] COVER-ADJUSTMENT  
2. 6L-5766 [1] GASKET  
3. 6N-1606 [1] SPRING  
4. 6L-5769 [1] WASHER  
5. 6N-1603 [1] HOUSING AS  
6. 6N-1602 [1] BEARING-SLEEVE  
7. 9N-0866 [1] BOLT-CONTROL ADJUSTABLE  
8. 4S-7458 [1] DIAPHRAGM  
9. 2N-5919 [3] BOLT  
10. 4F-7957 [2] BOLT  
11. 5S-6120 [1] RETAINER AS  
12. 6L-5767 [1] COVER-DIAPHRAGM  
13. 6N-7523 C [5] WASHER  
14. 5S-6458 [1] DOWEL  
15. 6N-0968 [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0882S0312
 

6N-6557: CAMSHAFT AS

6N6557 CAMSHAFT ASSEMBLY--Type 2
Part of 4N6550 Fuel Injection Pump and Governor Group shown on
Pages 99A & 99D-1. AN ATTACHMENT
c174520 UEG0882S
6N6557 CAMSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9018 [1] SHAFT  
2. 4N-5524 [3] WEIGHT  
3. 4N-1723 [1] SHIELD  
4. 4N-0511 [3] DOWEL  
5. 8N-2663 C [1] CARRIER  
6. 4N-9019 [1] DOWEL  
7. 6N-6567 [1] CAMSHAFT  
8. 8N-2662 C [3] BOLT  
  C   INDICATES CHANGE
 

#UEG0882S0313
 

6N-6211: GOV & FUEL INJ PUMP GP

6N6211 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 4B11327-Up. Part of 4N4207 Engine Arrangement listed on Page 13
6N6268 Governor and Fuel Injection Pump and 6N509 Torque Control parts are
shown on Pages 99G, 99H & 100. Refer to list page on Governor Springs listed on
Page 99K
c162330 UEG0882S
6N6211 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0509 Y [1] TORQUE CONTROL  
2. 6N-6268 Y [1] GOVERNOR & FUEL INJECTION PUMP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4224 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#UEG0882S0314
 

6N-7605: GOV & FUEL INJ PUMP GP

6N7605 GOVERNOR & FUEL INJECTION PUMP GROUP
Provides Field Replacement for 6N6211 Governor and Fuel Injection Pump Group
shown on Page 100B
UEG0882S0314 UEG0882S
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6N-7821 Y [1] PUMP GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEG0882S0315
 

6N-7821: GOV & FUEL INJ PUMP GP

6N7821 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 6N7605 Governor & Fuel Injection Pump Group shown on Page 100B
6N5356 Governor & Fuel Injection Pump parts are shown on Pages 107A through 107H
c161610 UEG0882S
6N7821 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-4710 [2] BOLT  
2. 4N-0053 [1] COVER  
  4N-0159 [1] GASKET  
3. 0S-1616 [1] BOLT  
4. 6N-2843 [1] GASKET  
5. 4N-5490 [1] BASE ASSEM.  
    (Includes)
6. 9S-4167 [1] STUD  
7. 9S-8597 [1] SPRING  
8. 6N-0509 [1] CONTROL GROUP  
9. 6N-5356 Y [1] PUMP GROUP  
    (Separate Illustration)
10. 9F-7022 [1] BOLT  
11. 4N-9336 [1] DISC  
12. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
13. 0S-1615 [11] BOLT  
14. 9F-6580 [2] BOLT  
15. 8S-4710 [1] BOLT  
16. 6D-0238 [1] VALVE ASSEM.  
17. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
18. 4N-4431 [1] GASKET  
  6N-2810 [1] CHANNEL  
19. 4N-4350 [1] COVER  
  4N-9056 [1] GASKET  
20. 4N-0443 [1] PIN  
21. 4N-4224 [1] SPRING  
22. 6N-0248 [1] SHAFT ASSEM.  
23. 4N-0444 [2] SPACER  
24. 4N-8179 [1] PIN  
25. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#UEG0882S0316
 

6N-0290: FUEL INJECTION PUMP AND GOVERNOR GROUP

6N290 FUEL INJECTION PUMP AND GOVERNOR GROUP
Part of 4N4207 Engine Arrangement listed on Page 13. 6N509 Torque Control and
6N253 Fuel Injection Pump and Governor parts are shown on Pages
100 and 102 through 103
c155017 UEG0882S
6N0290 FUEL INJECTION PUMP AND GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] TORQUE CONTROL  
2. Y [1] GOVERNOR & FUEL INJECTION PUMP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4228 C [1] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0882S0317
 

4N-4900: FUEL RATIO CONTROL GROUP

4N4900 FUEL RATIO CONTROL GROUP
Part of Fuel Injection Pump and Governor shown on Page 102A
c207144 UEG0882S
4N4900 FUEL RATIO CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5764 [1] COVER  
2. 6L-5766 [1] GASKET  
3. 6N-1606 [1] SPRING  
4. 6L-5769 [1] WASHER  
5. 6L-5771 C [1] HOUSING  
7. 9N-0866 [1] BOLT  
8. 4S-7458 [1] DIAPHRAGM  
9. 2N-5919 [3] BOLT  
10. 4F-7957 [2] BOLT  
11. 5S-6120 [1] RETAINER ASSEM.  
12. 6L-5767 [1] COVER  
13. 2S-4652 [5] WASHER  
14. 5S-6458 [1] PIN  
15. 6N-0968 [1] SPRING  
  C   INDICATES CHANGE
 

#UEG0882S0318
 

6N-0253: FUEL INJECTION PUMP AND GOVERNOR GROUP

6N253 FUEL INJECTION PUMP AND GOVERNOR GROUP--Part 1 of 2--Type 1
Part of 6N290 Fuel Injection Pump and Governor Group shown on Page 101
c151933 UEG0882S
6N0253 FUEL INJECTION PUMP AND GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2820 [1] LEVER ASSEM.  
    (Includes)
2. 7L-4993 [1] DOWEL  
3. 3N-2822 [1] LEVER  
4. 3N-2815 [1] SHAFT  
5. 9F-1707 [1] BOLT  
6. 3N-2824 [1] LEVER ASSEM.  
    (Includes)
7. 6N-0265 [1] DOWEL  
8. 6N-0242 [1] COVER  
  4N-0403 [1] GASKET  
9. 2A-0762 [2] BOLT  
10. 9F-7022 [1] BOLT  
11. 4N-5490 [1] BASE ASSEM.  
    (Includes)
12. 9S-4167 [1] STUD  
13. 6N-2843 C [1] GASKET  
14. 9F-6580 [2] BOLT  
15. 4N-9336 [1] DISC  
16. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
17. 0S-1615 [11] BOLT  
18. 8S-4710 [1] BOLT  
19. 6D-0238 [1] VALVE ASSEM.  
20. 6N-2810 C [1] CHANNEL  
  4N-4431 [1] GASKET  
21. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
23. 4N-4350 [1] COVER  
  4N-9056 [1] GASKET  
24. 9L-5914 [1] WASHER  
25. 6N-0248 [1] SHAFT ASSEM.  
26. 4N-0159 [1] GASKET  
27. 2N-2658 [1] BOLT  
28. 3N-2831 [1] ADAPTER ASSEM.  
    (Includes)
29. 4N-9467 [2] BEARING  
30. 3N-2813 [1] SEAL  
  C   INDICATES CHANGE
 

#UEG0882S0319
 

6N-0253: FUEL INJECTION PUMP AND GOVERNOR GROUP

6N253 FUEL INJECTION PUMP AND GOVERNOR GROUP--Part 2 of 2--Type 1
Part of 6N290 Fuel Injection Pump and Governor Group shown on Page 101
4N4900 Fuel Ratio Control and 4N1834 Fuel Injection Pump and Governor parts are shown on Pages 101 and 104 through 107
c151934 UEG0882S
6N0253 FUEL INJECTION PUMP AND GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-8507 [2] COVER  
  4N-0117 [2] GASKET  
2. 2A-0762 [4] BOLT  
3. Y [1] FUEL RATIO CONTROL  
    (Separate Illustration)
4. 6L-5773 [1] GASKET  
5. 4N-0444 [2] SPACER  
6. 2P-0726 [1] SPRING  
7. 4N-8179 [1] PIN  
8. 4L-3776 C [1] BOLT  
9. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL  
10. 3N-2832 [1] GASKET  
11. 3N-2826 [1] BASE  
12. 0S-1615 [3] BOLT  
13. 4N-5658 [1] PLUG  
14. 8F-6302 [1] BOLT  
15. 4N-0609 [1] COVER  
16. 4F-7957 [2] BOLT  
17. 5M-6214 [1] PLUG  
18. 4N-0610 [1] DIAPHRAGM  
19. Y [1] FUEL INJECTION PUMP  
    (Separate Illustration)
20. 2M-5471 [2] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet
1979/08/22
Improvements Made To Fuel Injection Pump And Governor Group
1979/11/28
New Fuel Injection Nozzle Assembly Used
1980/01/23
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Explanation Of Differences In Timing Advance Information
1981/08/26
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals
1981/09/16
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Seal Used On Governor Control Shaft
1982/12/15
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Service Information For Woodward Governors
1983/10/26
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly
1991/04/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Manufacturing And Design Improvements Incorporated Into Fuel Injection Nozzle Assemblies{1252,1307}
1997/07/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
A New Exhaust Manifold And Fuel Pump Heat Shield Is Used On Industrial Engines That Have A Woodward Governor With An Electric Motor
1978/07/05
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Equipment
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (4N4864)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (7L543 and 2N8603)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Bypass Valve
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governors
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Output Shaft Governor<BR> (8L8661)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Equipment
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Adjustable &quot;Dashpot&quot;<BR> (Close Regulation Type Governor)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel System Timing<BR> (Engines With Timing Pointer)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance Unit
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor<BR> (8N6774)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor Control
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Transfer Pump
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assembly And Push Rods (D330C, D333C, 3304 &amp; 3306 Industrial Engines)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Adapter Housing And Levers
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Check Valve And Bypass Valve
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Rocker Shaft And Push Rods
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Rocker Shaft (Later)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
New Fuel Injection Lines And Clamps Prevent Stresses And Contact Which Can Cause Leakage{1252}
1980/03/24
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New Tachometer Drive Adapter Has Increased Service Life{7462,1288}
1979/01/22
Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank{1275,1253,1274}
1979/03/12
Replacement Bushing Available For Cast Iron Rocker Arms Only{1102}
1979/03/26
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/04/15
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3304 :

TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP
CAMSHAFT ASSEMBLY
4N-6548 CAMSHAFT ASSEMBLY
GOVERNOR SPRINGS
GOVERNOR AS-RH
3L-4022 GOVERNOR AS-RH
GOVERNOR GP
8N-8597 GOVERNOR GP
GOVERNOR GP
8N-8597 GOVERNOR GP
GOV & FUEL INJ PUMP GP
6N-6268 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-6268 GOV & FUEL INJ PUMP GP
CONTROL GP-FUEL RATIO
6N-4654 CONTROL GP-FUEL RATIO
CAMSHAFT AS
6N-6557 CAMSHAFT AS
GOV & FUEL INJ PUMP GP
6N-6211 GOV & FUEL INJ PUMP GP
6N-7605 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-7821 GOV & FUEL INJ PUMP GP
FUEL INJECTION PUMP AND GOVERNOR GROUP
6N-0290 FUEL INJECTION PUMP AND GOVERNOR GROUP
FUEL RATIO CONTROL GROUP
4N-4900 FUEL RATIO CONTROL GROUP
FUEL INJECTION PUMP AND GOVERNOR GROUP
6N-0253 FUEL INJECTION PUMP AND GOVERNOR GROUP

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.