AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N5356 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4--Type 1 Part of 6N6268, 6N7821 & 6N253 Governor and Fuel Injection Pump Groups shown on Pages 99J-1, 100C & 103B 3304


FUEL SYSTEM
GOVERNOR GP

INDUSTRIAL ENGINE 3304 INDUSTRIAL ENGINE 04B
 3304 INDUSTRIAL ENGINE 04B07794-14448 UEG0882S 3304 04B   (1968)

FUEL SYSTEM

GOVERNOR GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
 

#UEG0882S0330
 

6N-5356: GOV & FUEL INJ PUMP GP

6N5356 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4--Type 1
Part of 6N6268, 6N7821 & 6N253 Governor and Fuel Injection Pump Groups shown on Pages 99J-1, 100C & 103B
c214980 UEG0882S
6N5356 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-5324 [1] HOUSING ASSEM.  
    (Includes)
2. 4N-2333 [1] PIN (spring)  
3. 8S-6814 [1] DOWEL  
4. 4N-5050 C [1] PLUG  
5. 4N-0260 [2] SEAL  
6. 6N-2578 [1] BEARING  
7. 4N-2786 [1] SEAL  
8. 9S-4180 C [1] PLUG  
  4J-7533 C [1] SEAL  
9. 4N-0425 [3] WEIGHT  
10. 4N-2927 [2] RACE  
11. 4N-0511 [3] DOWEL  
12. 4N-0446 [1] CARRIER  
13. 6N-6567 [1] CAMSHAFT  
14. 4N-2955 [3] BOLT  
15. 4N-2953 [1] RING  
16. 4N-2401 [1] BEARING  
17. 4N-0434 [1] RISER  
18. 4N-9018 [1] SHAFT  
19. 4N-9019 [1] DOWEL  
20. 4N-0927 [1] SHAFT ASSEM.  
21. 5M-6509 [1] SEAL  
22. 4N-0406 [1] GEAR (10 teeth)  
23. 9L-6863 C [1] BODY ASSEM.  
    (Includes)
24. 8H-9804 [1] SHAFT  
25. 4N-0636 [1] SEAL  
26. 4N-1584 [1] SEAL  
27. 8S-6814 [1] DOWEL  
28. 4N-5050 [1] PLUG  
29. 4N-3779 [1] KEY  
30. 4N-0429 [1] GEAR (15 teeth)  
31. 4N-0527 [1] SPRING  
32. 6N-4655 [1] DASHPOT ASSEM.  
33. 6N-2957 [2] WASHER  
  6N-2956 [1] WASHER (spring)  
34. 6N-7451 [1] SEAT  
35. 4N-1723 [1] SHIELD  
36. 4N-0507 [1] SHAFT ASSEM.  
  C   INDICATES CHANGE
 

#UEG0882S0331
 

6N-5356: GOV & FUEL INJ PUMP GP

6N5356 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4--Type 1
Part of 6N6268, 6N7821 & 6N253 Governor and Fuel Injection Pump Groups shown on Pages 99J-1, 100C & 103B
c214981 UEG0882S
6N5356 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6430 [1] PIN  
2. 3B-8695 [1] BOLT 8.89 cm(3.5 in.) long  
  2A-4781 [1] BOLT 6.98 cm(2.75 in.) long  
3. 1P-9925 [2] BOLT 6.35 cm(2.5 in.) long  
4. 6N-1346 [1] HOUSING ASSEM.  
    (Includes)
  6N-0343 [1] STUD  
5. 4N-2333 [1] PIN (spring)  
6. 4N-1826 [1] DOWEL  
  2D-6392 [1] SEAL  
7. 6N-5325 [4] PIN  
8. 1P-2298 [1] VALVE ASSEM.  
9. 9S-8632 [1] SPRING  
10. 4N-0116 [1] GUIDE  
11. 5J-5314 [4] BOLT  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-5578 C [1] COVER  
  4N-0049 [1] GASKET  
17. 6N-7523 C [1] WASHER  
18. 4N-0594 [1] GASKET  
  C   INDICATES CHANGE
 

#UEG0882S0332
 

6N-5356: GOV & FUEL INJ PUMP GP

6N5356 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4--Type 1
Part of 6N6268, 6N7821 & 6N253 Governor and Fuel Injection Pump Groups shown
on Pages 99J-1, 100C & 103B
c227044 UEG0882S
6N5356 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [4] BONNET  
2. 4N-0218 C [4] BUSHING  
3. 9B-1320 [4] VALVE  
  9L-9424 [4] SPRING  
4. 4N-0224 [4] RING  
5. 4N-1765 [4] PLUNGER AND BARREL ASSEM.  
6. 4N-4318 [4] SPRING  
7. 4N-2728 [4] WASHER  
8. 4N-1750 [4] LIFTER  
  4N-2685 C [4] ROLLER  
9. 2N-2658 [4] SCREW  
10. 4N-1763 [4] LEVER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 3H-0442 [1] SEAL  
15. 4N-0508 [1] GASKET  
16. 2M-5471 [2] BOLT  
17. 4N-1591 [1] COVER ASSEM.  
    (Includes)
  4N-0506 [1] COVER  
18. 4N-1594 C [1] SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER -1.53 mm(.06 in.) thick  
  8F-1326 [1] WASHER -.82 mm(.032 in.) thick  
19. 4N-0223 [4] SEAL  
20. 4N-0445 [1] LEVER  
21. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
  C   INDICATES CHANGE
 

#UEG0882S0333
 

6N-5356: GOV & FUEL INJ PUMP GP

6N5356 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4--Type 1
Part of 6N6268, 6N7821 & 6N253 Governor and Fuel Injection Pump Groups shown on Pages 99J-1, 100C & 103B
c160293 UEG0882S
6N5356 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1881 [1] LEVER  
2. 4N-0448 [1] LEVER ASSEM.  
    (Includes)
  9L-8571 [1] DOWEL  
3. 8F-5368 [1] WASHER  
4. 0S-1616 [4] BOLT  
5. 4N-0402 [1] GASKET  
6. 9S-8601 [1] PIN  
7. 6N-5482 [2] PLATE  
8. 4N-0605 [1] SPRING  
9. 4N-0687 [1] COVER ASSEM.  
    (Includes)
10. 4N-2786 [1] SEAL  
11. 4N-1767 [1] VALVE  
 

#UEG0882S0334
 

6N-5356: GOV & FUEL INJ PUMP GP

6N5356 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4--Type 2
Part of 6N6268, 6N7821 & 6N253 Governor & Fuel Injection Pump Groups shown on Pages 99J-1, 100C & 103B
c226241 UEG0882S
6N5356 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-5324 [1] HOUSING ASSEM.  
    (Includes)
2. 4N-2333 [1] PIN (spring)  
3. 8S-6814 [1] DOWEL  
4. 4N-5050 [1] PLUG  
5. 4N-0260 [2] SEAL  
6. 6N-2578 [1] BEARING  
7. 4N-2786 [1] SEAL  
8. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
9. 4N-0425 [3] WEIGHT  
10. 4N-2927 [2] RACE  
11. 4N-0511 [3] DOWEL  
12. 4N-1723 [1] SHIELD  
13. 6N-6567 [1] CAMSHAFT  
14. 4N-0507 [1] SHAFT ASSEM.  
15. 4N-2953 [1] RING  
16. 4N-2401 [1] BEARING  
17. 4N-0434 [1] RISER  
18. 4N-9018 [1] SHAFT  
19. 4N-9019 [1] DOWEL  
20. 4N-0927 [1] SHAFT ASSEM.  
21. 5M-6509 [1] SEAL  
22. 4N-0406 [1] GEAR (10 teeth)  
23. 9L-6863 [1] BODY ASSEM.  
    (Includes)
24. 8H-9804 [1] SHAFT  
25. 4N-0636 [1] SEAL  
26. 4N-1584 [1] SEAL  
27. 8S-6814 [1] DOWEL  
28. 4N-5050 [1] PLUG  
29. 4N-3779 [1] KEY  
30. 4N-0429 [1] GEAR (15 teeth)  
31. 4N-0527 [1] SPRING  
32. 6N-4655 [1] DASHPOT ASSEM.  
33. 6N-2957 [2] WASHER  
  6N-2956 [1] WASHER (spring)  
34. 6N-7451 [1] SEAT  
35. 4N-0446 [1] CARRIER  
    - OR -
C. 8N-2663 [1] CARRIER  
36. 4N-2955 [3] BOLT- 22.23 mm(.875 in.) long  
    - OR -
  8N-2662 C [3] BOLT- 25.4 mm(1 in.) long (Low Head)  
  C   INDICATES CHANGE
 

#UEG0882S0335
 

6N-5356: GOV & FUEL INJ PUMP GP

6N5356 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4--Type 2
Part of 6N6268, 6N7821 & 6N253 Governor and Fuel Injection Pump Groups shown on Pages 99J-1, 100C and 103B
c222933 UEG0882S
6N5356 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6430 [1] PIN  
2. 3B-8695 [1] BOLT 8.89 cm(3.5 in.) long  
  2A-4781 [1] BOLT 6.98 cm(2.75 in.) long  
3. 1P-9925 [2] BOLT 6.35 cm(2.5 in.) long  
4. 8N-1569 C [1] HOUSING ASSEM.  
    (Includes)
  4N-5481 [1] STUD  
5. 4N-2333 [1] PIN (spring)  
6. 4N-1826 [1] DOWEL  
  2D-6392 [1] SEAL  
7. 8N-0984 [4] PIN  
8. 1P-2298 [1] VALVE ASSEM.  
9. 9S-8632 [1] SPRING  
10. 4N-0116 [1] GUIDE  
11. 5J-5314 [4] BOLT  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-5578 [1] COVER  
  4N-0049 [1] GASKET  
17. 6N-7523 [1] WASHER  
18. 4N-0594 [1] GASKET  
  C   INDICATES CHANGE
 

#UEG0882S0336
 

6N-5356: GOV & FUEL INJ PUMP GP

6N5356 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4--Type 2
Part of 6N6268, 6N7821 & 6N253 Governor & Fuel Injection Pump Groups shown on
Pages 99J-1, 100C & 103B
c227045 UEG0882S
6N5356 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [4] BONNET  
2. 4N-0218 [4] BUSHING  
3. 9B-1320 [4] VALVE  
  9L-9424 [4] SPRING  
4. 4N-0224 [4] RING  
5. 4N-1765 [4] PLUNGER AND BARREL ASSEM.  
6. 4N-4318 [4] SPRING  
7. 4N-2728 [4] WASHER  
8. 8N-1317 C [4] LIFTER  
  4N-2685 C [4] ROLLER  
9. 2N-2658 [4] SCREW  
10. 4N-1763 [4] LEVER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 3H-0442 [1] SEAL  
15. 4N-0508 [1] GASKET  
16. 2M-5471 [2] BOLT  
17. 4N-1591 [1] COVER ASSEM.  
    (Includes)
  4N-0506 [1] COVER  
18. 4N-1594 C [1] SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER -1.53 mm(.06 in.) thick  
  8F-1326 [1] WASHER -.82 mm (.032 in.)thick  
19. 4N-0223 [4] SEAL  
20. 4N-0445 [1] LEVER  
21. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
  C   INDICATES CHANGE
 

#UEG0882S0337
 

6N-5356: GOV & FUEL INJ PUMP GP

6N5356 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4--Type 2
Part of 6N6268, 6N7821 & 6N253 Governor and Fuel Injection Pump Groups shown on Pages 99J-1, 100C & 103B
c160293 UEG0882S
6N5356 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1881 [1] LEVER  
2. 4N-0448 [1] LEVER ASSEM.  
    (Includes)
  9L-8571 [1] DOWEL  
3. 8F-5368 [1] WASHER  
4. 0S-1616 [4] BOLT  
5. 4N-0402 [1] GASKET  
6. 9S-8601 [1] PIN  
7. 6N-5482 [2] PLATE  
8. 4N-0605 [1] SPRING  
9. 4N-0687 [1] COVER ASSEM.  
    (Includes)
10. 4N-2786 [1] SEAL  
11. 4N-1767 [1] VALVE  
 

#UEG0882S0338
 

6N-1461: WOODWARD GOVERNOR GROUP

6N1461 WOODWARD GOVERNOR GROUP--24 Volt
6N1460 Governor parts are shown on Page 109. AN ATTACHMENT
c154306 UEG0882S
6N1461 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-2081 [1] LEVER  
2. 3L-1474 [1] PIN  
3. 6N-1460 Y [1] GOVERNOR ASSEM.  
    (Separate Illustration)
4. 2L-8919 [6] DISCONNECT  
5. 8F-1559 [3] INSULATOR  
6. 3L-3911 [1] SWITCH (speed)  
7. 3L-4576 [1] PLATE (name)  
  [1] WIRING DIAGRAM  
  Y   SEPARATE ILLUSTRATION
 

#UEG0882S0339
 

4N-6308: WOODWARD GOVERNOR GROUP

4N6308 WOODWARD GOVERNOR GROUP
4N6337 Governor parts are shown on Page 110. AN ATTACHMENT
c152741 UEG0882S
4N6308 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-2081 [1] LEVER  
2. 3L-1474 [1] PIN  
3. 4N-6337 Y [1] GOVERNOR ASSEM.  
    (Separate Illustration)
4. 2L-8919 [6] DISCONNECT  
5. 8F-1559 [3] INSULATOR  
6. 3L-3911 C [1] SWITCH (speed)  
7. 3L-4576 C [1] PLATE (name)  
  C [1] WIRING DIAGRAM  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet
1979/08/22
Improvements Made To Fuel Injection Pump And Governor Group
1979/11/28
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Explanation Of Differences In Timing Advance Information
1981/08/26
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals
1981/09/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Seal Used On Governor Control Shaft
1982/12/15
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Governor Control Cover Assembly Includes New Seal And Improved Cover{1264}
1997/07/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
A New Exhaust Manifold And Fuel Pump Heat Shield Is Used On Industrial Engines That Have A Woodward Governor With An Electric Motor
1978/07/05
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Equipment
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (4N4864)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (7L543 and 2N8603)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governors
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Output Shaft Governor<BR> (8L8661)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Equipment
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Adjustable &quot;Dashpot&quot;<BR> (Close Regulation Type Governor)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel System Timing<BR> (Engines With Timing Pointer)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance Unit
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor<BR> (8N6774)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor Control
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Transfer Pump
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Adapter Housing And Levers
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Check Valve And Bypass Valve
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
A New Exhaust Manifold And Fuel Pump Heat Shield Is Used On Industrial Engines That Have A Woodward Governor With An Electric Motor{1059,1250,1289}
1978/05/29
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Tachometer Drive Adapter Has Increased Service Life{7462,1288}
1979/01/22
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog 3304 :

GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0253 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0253 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0253 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0253 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
WOODWARD GOVERNOR GROUP
6N-1461 WOODWARD GOVERNOR GROUP

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.