AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1M1580 CYLINDER GROUP--4" Bore x 22.875" Stroke--2 Required 583K PIPELAYER


HYDRAULIC SYSTEM
CYLINDER GP
BASIC ENGINE
POWER TAKE-OFF GP
WORK TOOLS
WINCH GP
IMPLEMENTS
POWER TAKE-OFF GP
WORK TOOLS
WINCH GP

PIPELAYER 583K PIPELAYER 78V
 583K PIPELAYER 78V00001-00534 (MACHINE) UEG0892S 583K 78V   (1974)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP
1M-1580 CYLINDER GP
 

#UEG0892S0170
 

1M-1580: CYLINDER GP

1M1580 CYLINDER GROUP--4" Bore x 22.875" Stroke--2 Required
c109758 UEG0892S
1M1580 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 583K PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1M-1571 [1] RING  
  3H-2665 [2] PACKING  
  1M-1568 [1] NUT  
  4F-2609 [1] PIN  
  2K-5708 [1] BEARING  
    (PART OF ASSEM. 1M1566)
  1M-1569 [1] RETAINER  
  1M-1570 [2] RETAINER  
  4F-7952 [1] SEAL  
  1M-1572 [1] PISTON  
  1M-1566 [1] CYLINDER ASSEM.  
  0S-1590 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  2H-3932 [1] SEAL  
  1M-1577 [1] HEAD  
  1K-7112 [1] PACKING  
  1K-6981 [1] SEAL  
  0S-1588 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  1M-3108 [1] ROD ASSEM.  
  2K-4511 [1] BEARING  
    (PART OF ASSEM. 1M3108)
  1M-1573 [1] RETAINER  
  1M-1574 [1] SHIM (.0650"THICK)  
  1M-1575 [2] SHIM (.010"THICK)  
  1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  2K-6830 [1] WASHER  
  1H-8128 [1] SEAL  
 

#UEG0892S0171
 

4M-4646: POWER TAKE-OFF CLUTCH CONTROL

POWER TAKE-OFF CLUTCH CONTROL (4M4646 N/S)
c204232 UEG0892S
4M4646 POWER TAKE-OFF CLUTCH CONTROL Parts scheme
  For full view, you need register

Parts for your 583K PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6F-7010 [1] END  
  1B-4430 [1] NUT  
  1P-5847 C [1] ROD ASSEM.  
  1B-4430 [1] NUT  
  2M-8340 [1] END  
    (PARTS OF ROD ASSEM. 1P5847)
  3H-1258 [1] RING  
  0M-9336 [1] WASHER  
  3B-8489 [1] FITTING  
  8H-0349 [2] BEARING  
    (PART OF BELLCRANK ASSEM. 1M8126)
  2H-1495 [2] SEAL  
  0L-0829 [1] HANDLE  
  4M-4617 [1] LEVER ASSEM.  
  2K-5830 [2] BEARING  
    (PART OF LEVER ASSEM. 4M4617)
  0S-1584 [4] BOLT  
  1B-4205 [4] NUT  
  0V-0531 C [4] WASHER  
  3B-4508 [4] LOCKWASHER  
  2K-7052 [1] BRACKET  
  3B-8488 [1] FITTING  
  1M-0316 [1] BELLCRANK ASSEM.  
  3B-6824 [1] WASHER  
  2K-5807 [1] PIN  
  1K-7029 [2] SHIM  
  5F-1678 [2] SEAL  
  0S-0107 [1] WASHER  
  4B-6060 [1] SET SCREW  
  1H-9535 [1] RING  
  4B-9562 [1] WASHER  
  3B-8489 [1] FITTING  
  0S-0175 [2] PIN  
  3B-4617 [2] COTTER PIN  
  1M-8126 [1] BELL CRANK ASSEM.  
  0S-0175 [2] PIN  
  3B-4617 [2] COTTER PIN  
  1M-8115 [1] FORK ASSEM.  
  6F-7010 [1] END  
  1B-4430 [1] NUT  
  1K-0505 [1] WASHER  
  0S-1595 [1] BOLT  
  3B-4508 [1] LOCKWASHER  
  8F-6437 [1] WASHER  
  1M-8119 [1] GUIDE ASSEM.  
  1M-8116 [1] SPRING  
  1M-8121 [1] ROD ASSEM.  
  6F-7010 [1] END  
  1B-4430 [1] NUT  
  7M-6189 [1] ROD ASSEM.  
  1B-4430 [1] NUT  
  2M-8340 [1] END  
    (PARTS OF ROD ASSEM. 7M6189)
  7M-6190 [1] LEVER  
  1B-8714 [1] KEY  
  0S-1579 [1] BOLT  
  1B-4205 [1] NUT  
  0S-0175 [2] PIN  
  3B-4617 [2] COTTER PIN  
  4B-3672 [1] BEARING  
    (PART OF BELLCRANK ASSEM. 1M316)
  5H-6136 [2] SEAL  
  C   INDICATES CHANGE
 

#UEG0892S0172
 

7S-7962: CLUTCH AS-POWER TAKE-OFF

7S7962 POWER TAKE-OFF CLUTCH ASSEMBLY
Part of Clutch and Drive Group shown on Page 101
c226298 UEG0892S
7S7962 CLUTCH AS-POWER TAKE-OFF Parts scheme
  For full view, you need register

Parts for your 583K PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1K-3166 [1] PLATE  
  1K-3165 [6] SPRING  
  9M-2887 [1] HUB  
  1K-9582 C [6] PIN  
  7S-7934 [2] PLATE ASSEM.  
  6B-1011 [1] SPRING  
  1K-3618 [1] PIN  
  3P-3106 C [6] LEVER  
  1S-9319 [3] PIN  
  6L-3964 [3] COTTER PIN  
  1K-1482 [1] COLLAR  
  3P-3104 C [6] ROLLER  
  1K-3620 [1] RING  
  1K-3616 [3] SPRING  
  3P-3105 C [3] SPACER  
  2K-3102 [1] SLEEVE  
  1K-6730 [1] RING  
  1K-1708 [1] BEARING  
  1K-1709 [1] WASHER  
  8B-7789 [1] RING  
  1K-3613 [1] YOKE  
  1K-3612 [1] DISC  
  1K-3626 [1] PLATE  
  C   INDICATES CHANGE
 

#UEG0892S0173
 

1M-0522: CLUTCH & DRIVE GP

1M522 CLUTCH AND DRIVE GROUP--Rear View--Part 1 of 2
Serial No. 78V1 to 78V528 inclusive
c125889 UEG0892S
1M0522 CLUTCH & DRIVE GP Parts scheme
  For full view, you need register

Parts for your 583K PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2K-3037 [1] ROD ASSEM.  
  5B-9079 [1] NUT  
    (PART OF ASSEM. 2K3037)
  5B-9079 [3] NUT  
  3F-1417 [1] WASHER  
  2K-2771 [2] SEAT  
  3H-1937 [1] SPRING  
  2K-2772 [1] PIN  
  9H-8447 [1] LEVER  
  5M-2027 [1] JOINT  
  5B-9079 [1] NUT  
  3B-4506 [1] LOCKWASHER  
  9H-8465 C [1] PLATE  
  0S-1579 [1] BOLT  
  1B-4205 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  9H-8470 [1] LEVER  
  2K-5224 [1] CHAIN ASSEM.  
  2K-2730 [1] LINK  
  5B-6375 [52] LINK  
  2K-2729 [25] LINK  
  6H-5852 [1] COVER  
  0L-1351 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  4H-3119 [1] PIN  
  9H-8458 [1] SHOE ASSEM.  
  1K-4687 [1] BEARING  
    (PART OF ASSEM. 9H8481)
  1K-0480 [1] PIN  
  3B-4628 [2] COTTER PIN  
  2K-5201 [1] COVER  
  9B-2596 [1] RIVET  
    (PARTS OF ASSEM. 9H8481)
  0S-0509 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  2K-2681 [1] COVER  
  0S-1594 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  0T-0694 [1] PIN  
  3B-4617 [2] COTTER PIN  
  2K-2677 [1] LINING  
  7B-5062 [6] RIVET  
    (PARTS OF ASSEM. 9H8458)
  9H-5470 [1] PLATE  
    (LUBRICATION INSTRUCTIONS)
  7F-9090 [4] SCREW  
  1K-3958 [1] COVER  
  0L-1351 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  2K-2724 [1] ADAPTER ASSEM.  
  1M-0540 [1] SHAFT  
  0S-1594 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  1K-4687 [1] BUSHING  
    (PART OF ASSEM. 2K2724)
  2K-2753 [1] YOKE  
  3B-1915 [2] BOLT  
  1B-8714 [3] KEY  
  2B-7410 [1] PLUG  
  1A-2029 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  9H-8481 [1] HOUSING ASSEM.  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEG0892S0174
 

1M-0522: CLUTCH & DRIVE GP

1M522 CLUTCH AND DRIVE GROUP--Top View--Part 2 of 2
Serial No. 78V1 to 78V528 inclusive
7S7962 Clutch, 2K7061, 2K7062 Drive Shaft and 2K2784 Drive Hanger parts are shown on Pages 99, 102 and 103
c116128 UEG0892S
1M0522 CLUTCH & DRIVE GP Parts scheme
  For full view, you need register

Parts for your 583K PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2K-7062 Y [1] SHAFT ASSEM.  
    (SEPARATE ILLUSTRATION)
  2K-2784 Y [1] HANGER GROUP  
    (SEPARATE ILLUSTRATION)
  2K-2707 [3] STUD  
  3F-7673 [3] NUT  
  1K-4693 [3] WASHER  
  2K-2706 [5] STUD  
    (PART OF ASSEM. 9H8479)
  1B-4203 [5] NUT  
  3B-4506 [5] LOCKWASHER  
  9H-8479 [1] HOUSING ASSEM.  
  2K-2732 [1] KEY  
  2D-5898 C [1] FITTING  
  2K-2733 [2] KEY  
  9H-8449 [1] SHAFT  
  2H-3783 [1] CUP  
  3B-6495 [1] ELBOW  
  0L-0478 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  2K-7061 Y [1] SHAFT ASSEM.  
    (SEPARATE ILLUSTRATION)
  8B-5144 [5] BOLT  
  1B-4206 [5] NUT  
  3B-4510 [5] LOCKWASHER  
  1D-4327 [1] SEAL  
  2K-5164 [1] RETAINER  
  1A-2029 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  2K-5252 [1] GASKET  
  9B-0576 [1] NUT  
  9B-0577 [1] LOCK  
  2D-5658 C [1] BEARING  
  2H-3846 [1] SEAL  
  2D-5898 C [1] FITTING  
  5H-0793 [1] RING  
  5H-1901 [1] RACE & ROLLER ASSEM.  
  8B-5964 [1] INNER RACE  
  2K-5165 [1] SPROCKET  
  2K-5221 [1] SLEEVE  
  2K-2738 [8] STUD  
  1B-4442 [8] NUT  
  3B-4610 [8] COTTER PIN  
  9H-8468 [1] FLANGE  
  1T-0043 C [1] BEARING  
  5H-0793 [1] RING  
  2H-3918 [1] SEAL  
  9H-8471 [1] SLEEVE  
  7S-7962 YC [1] CLUTCH ASSEM.  
    (SEPARATE ILLUSTRATION)
  2K-5223 [1] SLEEVE  
  4D-7023 [1] SEAL  
  8F-1145 [1] RING  
  2K-5254 [1] RACE & ROLLER ASSEM.  
  2K-5253 [1] INNER RACE  
  2K-5220 [1] WASHER  
  0S-1593 [2] BOLT  
  0S-1922 [1] LOCK  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0892S0175
 

1M-0522: CLUTCH & DRIVE GP

1M522 CLUTCH AND DRIVE GROUP--Rear View--Part 1 of 2
Serial No. 78V529-Up
c161441 UEG0892S
1M0522 CLUTCH & DRIVE GP Parts scheme
  For full view, you need register

Parts for your 583K PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2K-3037 [1] ROD ASSEM.  
  5B-9079 [1] NUT  
    (PART OF ASSEM. 2K3037)
  5B-9079 [3] NUT  
  3F-1417 [1] WASHER  
  2K-2771 [2] SEAT  
  3H-1937 [1] SPRING  
  2K-2772 [1] PIN  
  9H-8447 [1] LEVER  
  5M-2027 [1] JOINT  
  5B-9079 [1] NUT  
  3B-4506 [1] LOCKWASHER  
  8P-5859 C [1] PLATE  
  0S-1579 [1] BOLT  
  1B-4205 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  9H-8470 [1] LEVER  
  2K-5224 [1] CHAIN ASSEM.  
    (Includes)
  2K-2730 [1] LINK  
  5B-6375 [52] LINK  
  2K-2729 [25] LINK  
  6H-5852 [1] COVER  
  0L-1351 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  4H-3119 [1] PIN  
  9H-8458 [1] SHOE ASSEM.  
  1K-4687 [1] BEARING  
    (PART OF ASSEM. 9H8481)
  1K-0480 [1] PIN  
  3B-4628 [2] COTTER PIN  
  2K-5201 [1] COVER  
  9B-2596 [1] RIVET  
    (PARTS OF ASSEM. 9H8481)
  0S-0509 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  2K-2681 [1] COVER  
  0S-1594 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  0T-0694 [1] PIN  
  3B-4617 [2] COTTER PIN  
  2K-2677 [1] LINING  
  7B-5062 [6] RIVET  
    (PARTS OF ASSEM. 9H8458)
  9H-5470 [1] PLATE  
    (LUBRICATION INSTRUCTIONS)
  7F-9090 [4] SCREW  
  1K-3958 [1] COVER  
  0L-1351 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  2K-2724 [1] ADAPTER ASSEM.  
  1M-0540 [1] SHAFT  
  0S-1594 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  1K-4687 [1] BUSHING  
    (PART OF ASSEM. 2K2724)
  2K-2753 [1] YOKE  
  3B-1915 [2] BOLT  
  1B-8714 [3] KEY  
  2B-7410 [1] PLUG  
  1A-2029 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  9H-8481 [1] HOUSING ASSEM.  
  C   INDICATES CHANGE
 

#UEG0892S0176
 

1M-0522: CLUTCH & DRIVE GP

1M522 CLUTCH AND DRIVE GROUP--Top View--Part 2 of 2
Serial No. 78V529-Up
7S7962 Clutch, 2K7061, 2K7062 Drive Shaft and 2K2784 Drive Hanger parts are shown on Pages 99, 102 and 103
c161442 UEG0892S
1M0522 CLUTCH & DRIVE GP Parts scheme
  For full view, you need register

Parts for your 583K PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2K-7062 Y [1] SHAFT ASSEM.  
    (SEPARATE ILLUSTRATION)
  2K-2784 Y [1] HANGER GROUP  
    (SEPARATE ILLUSTRATION)
  2K-2707 [3] STUD  
  3F-7673 [3] NUT  
  1K-4693 [3] WASHER  
  2K-2706 [5] STUD  
    (PART OF ASSEM. 9H8479)
  1B-4203 [5] NUT  
  3B-4506 [5] LOCKWASHER  
  9H-8479 [1] HOUSING ASSEM.  
  2K-2732 [1] KEY  
  2D-5898 [1] FITTING  
  2K-2733 [2] KEY  
  9H-8449 [1] SHAFT  
  2H-3783 [1] CUP  
  3B-6495 [1] ELBOW  
  0L-0478 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  2K-7061 Y [1] SHAFT ASSEM.  
    (SEPARATE ILLUSTRATION)
  8B-5144 [5] BOLT  
  1B-4206 [5] NUT  
  3B-4510 [5] LOCKWASHER  
  1D-4327 [1] SEAL  
  2K-5164 [1] RETAINER  
  1A-2029 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  2K-5252 [1] GASKET  
  9B-0576 [1] NUT  
  9B-0577 [1] LOCK  
  2D-5658 [1] BEARING  
  2H-3846 [1] SEAL  
  2D-5898 [1] FITTING  
  5H-0793 [1] RING  
  5H-1901 [1] RACE & ROLLER ASSEM.  
  8B-5964 [1] INNER RACE  
  2K-5165 [1] SPROCKET  
  2K-5221 [1] SLEEVE  
  2K-2738 [8] STUD  
  1B-4442 [8] NUT  
  3B-4610 [8] COTTER PIN  
  9H-8468 [1] FLANGE  
  1T-0043 [1] BEARING  
  5H-0793 [1] RING  
  2H-3918 [1] SEAL  
  9H-8471 [1] SLEEVE  
  7S-7962 Y [1] CLUTCH ASSEM.  
    (SEPARATE ILLUSTRATION)
  2K-5223 [1] SLEEVE  
  4D-7023 [1] SEAL  
  8F-1145 [1] RING  
  2K-5254 [1] RACE & ROLLER ASSEM.  
  2K-5253 [1] INNER RACE  
  2K-5220 [1] WASHER  
  0S-1593 [2] BOLT  
  0S-1922 [1] LOCK  
  Y   SEPARATE ILLUSTRATION
 

#UEG0892S0177
 

2K-7061: DRIVE SHAFT GP

2K7061 DRIVE SHAFT ASSEMBLY
Part of Clutch and Drive Group shown on Page 101
c47531 UEG0892S
2K7061 DRIVE SHAFT GP Parts scheme
  For full view, you need register

Parts for your 583K PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2K-7183 [1] COUPLING PLATE  
  0L-0478 [16] BOLT  
  3B-4506 [16] LOCKWASHER  
  2K-4606 [4] PLUG  
  2K-4644 [4] WASHER  
    (2 OF EACH IN EACH ASSEM. 2K3631)
  2K-3632 [1] FITTING YOKE & DUST CUP ASSEM.  
  3H-0298 [8] WASHER  
    (4 IN EACH ASSEM. 2K3631)
  2K-3631 [2] SPIDER & BEARING ASSEM.  
 

#UEG0892S0178
 

2K-7062: DRIVE SHAFT GP

2K7062 DRIVE SHAFT GROUP
Part of Clutch and Drive Group shown on Page 101
c221989 UEG0892S
2K7062 DRIVE SHAFT GP Parts scheme
  For full view, you need register

Parts for your 583K PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-7184 [1] YOKE ASSEM.  
2. 2K-3631 [2] SPIDER & BEARING ASSEM.  
    (Each Includes)
  027-1287 [1] FITTING  
3. 3V-2431 C [12] WASHER  
4. 2K-3632 [1] FITTING YOKE & DUST CUP ASSEM.  
5. 0L-0478 C [12] BOLT  
  C   INDICATES CHANGE
 

#UEG0892S0179
 

2K-2784: HANGER GP-DRIVE

2K2784 DRIVE HANGER ASSEMBLY
Part of Clutch and Drive Group shown on Page 101
c213112 UEG0892S
2K2784 HANGER GP-DRIVE Parts scheme
  For full view, you need register

Parts for your 583K PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2D-5898 [1] FITTING  
  2K-1615 [1] GASKET  
  1A-2029 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  2K-2669 [1] RETAINER  
  2K-2670 [1] SHAFT  
  2K-2739 [1] SET SCREW  
  1D-5118 [1] NUT  
  2K-2638 [1] COVER  
  2K-2737 [1] GASKET  
  2K-2667 [1] SPROCKET  
  0S-1594 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  0S-1593 [2] BOLT  
  0S-1922 [1] LOCK  
  1F-7840 [1] WASHER  
  1D-4327 [2] SEAL  
  2K-2711 [1] RACE  
  6L-2319 [1] OUTER RACE AND ROLLER ASSEM.  
  2K-2640 [1] HOUSING  
  2D-5658 C [1] BEARING  
  9B-0576 [1] NUT  
  9B-0577 [1] LOCK  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Counterweight Cylinders<BR> (1M1580)
572G & 583K PIPELAYERS
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Counterweight Cylinders
583K PIPELAYER PORTION
Service Magazine
New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 583K :

COUNTERWEIGHT
9H-3305 COUNTERWEIGHT
TRANSMISSION GP-WINCH
2K-1636 TRANSMISSION GP-WINCH
TRANSMISSION GP-WINCH
2K-1636 TRANSMISSION GP-WINCH
TRANSMISSION REVERSE LOCK CONTROL GROUP
1M-0315 TRANSMISSION REVERSE LOCK CONTROL GROUP
TRANSMISSION CONTROL GROUP
8M-1393 TRANSMISSION CONTROL GROUP
SHEAVE BLOCK AND CABLE GROUP
9H-0380 SHEAVE BLOCK AND CABLE GROUP
SHEAVE BLOCK AND CABLE ARRANGEMENT
2K-3083 SHEAVE BLOCK AND CABLE ARRANGEMENT
BOOM GP
2K-2375 BOOM GP
POWER TAKE-OFF CLUTCH CONTROL
4M-4646 POWER TAKE-OFF CLUTCH CONTROL
CLUTCH AS-POWER TAKE-OFF
7S-7962 CLUTCH AS-POWER TAKE-OFF
CLUTCH & DRIVE GP
1M-0522 CLUTCH & DRIVE GP
CLUTCH & DRIVE GP
1M-0522 CLUTCH & DRIVE GP
CLUTCH & DRIVE GP
1M-0522 CLUTCH & DRIVE GP
CLUTCH & DRIVE GP
1M-0522 CLUTCH & DRIVE GP
DRIVE SHAFT GP
2K-7061 DRIVE SHAFT GP
DRIVE SHAFT GP
2K-7062 DRIVE SHAFT GP

Truck sale:

CATERPILLAR 583K 1976
 
CATERPILLAR 583K 1976
- PIPELAYERS
PIPELINE MACHINERY
15434 Cypress North Houston - Cypress -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.