AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3208 TRUCK ENGINE COVERING ENGINE ARRANGEMENTS 9L6082 9L6260 40S00001-UP FUEL SYSTEM Caterpillar SIS



TRUCK ENGINE 3208 TRUCK ENGINE 40S
 3208 TRUCK ENGINE COVERING ENGINE ARRANGEMENTS 9L6082 9L6260 40S00001-UP UEG0894S 3208 40S   (1974)

Parts group 3208:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
9L-6743 CONTROL GP-GOVERNOR
9L6743 GOVERNOR CONTROL GROUP
Serial No. 40S1 to 40S1683 inclusive
CONTROL GP-GOVERNOR
9L-6743 CONTROL GP-GOVERNOR
9L6743 GOVERNOR CONTROL GROUP
Serial No. 40S1684-Up
FILTER GP-FUEL
LINES GP-FUEL FILTER
9N-0435 LINES GP-FUEL FILTER
9N435 FUEL FILTER LINES GROUP
Serial No. 40S1 to 40S3007 inclusive
LINES GP-FUEL FILTER
9N-0435 LINES GP-FUEL FILTER
9N435 FUEL FILTER LINES GROUP
Serial No. 40S3008 to 40S8560 inclusive
LINES GP-FUEL FILTER
9N-0435 LINES GP-FUEL FILTER
9N435 FUEL FILTER LINES GROUP
Serial No. 40S8561-Up
LINES GP-FUEL FILTER
9N-0434 LINES GP-FUEL FILTER
9N434 FUEL FILTER LINES GROUP
Serial No. 40S1 to 40S3007 inclusive
LINES GP-FUEL FILTER
9N-0434 LINES GP-FUEL FILTER
9N434 FUEL FILTER LINES GROUP
Serial No. 40S3008 to 40S8560 inclusive
LINES GP-FUEL FILTER
9N-0434 LINES GP-FUEL FILTER
9N434 FUEL FILTER LINES GROUP
Serial No. 40S8561-Up
FUEL FILTER LINES GROUP
9N-1054 FUEL FILTER LINES GROUP
9N1054 FUEL FILTER LINES GROUP
Serial No. 40S1 to 40S3282 inclusive
FUEL FILTER LINES GROUP
9N-1054 FUEL FILTER LINES GROUP
9N1054 FUEL FILTER LINES GROUP
Serial No. 40S3283 to 40S8560 inclusive
FUEL FILTER LINES GROUP
9N-1054 FUEL FILTER LINES GROUP
9N1054 FUEL FILTER LINES GROUP
Serial No. 40S8561-Up
LINES GP-FUEL FILTER
9N-1945 LINES GP-FUEL FILTER
9N1945 FUEL FILTER LINES GROUP
Serial No. 40S5137 to 40S8560 inclusive
LINES GP-FUEL FILTER
9N-1945 LINES GP-FUEL FILTER
9N1945 FUEL FILTER LINES GROUP
Serial No. 40S8561-Up
LINES GP-FUEL FILTER
6N-2267 LINES GP-FUEL FILTER
6N2267 FUEL FILTER LINES GROUP
Serial No. 40S46794-Up
FILTER GP-FUEL
4N-5868 FILTER GP-FUEL
4N5868 FUEL FILTER GROUP
Serial No. 40S1 to 40S43366 inclusive
FILTER GP-FUEL
4N-5868 FILTER GP-FUEL
4N5868 FUEL FILTER GROUP
Serial No. 40S43367-Up
FILTER GP-FUEL
9N-0396 FILTER GP-FUEL
9N396 FUEL FILTER GROUP
FUEL FILTER GROUP
9N-1050 FUEL FILTER GROUP
9N1050 FUEL FILTER GROUP
FILTER GP-FUEL
6N-2266 FILTER GP-FUEL
6N2266 FUEL FILTER GROUP
FILTER GP-PRIMARY FUEL
8H-4681 FILTER GP-PRIMARY FUEL
8H4681 PRIMARY FUEL FILTER GROUP
Part of 8N3569 and 9N5458 Fuel Pump Groups shown on Pages 170A & 170B
GOVERNOR GP
9N-0495 PUMP GP-GOV DRV,FUEL INJ & TFR
9N495 GOVERNOR AND FUEL INJECTION PUMP GROUP
Provides Field Replacement for 9N1351 and 9N1352 when used in
conjunction with 9N683 Shut-Off Group
GOV & FUEL INJ PUMP GP
9N-1351 GOV & FUEL INJ PUMP GP
9N1351 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2604 & 6N1864 Governor & Fuel Injection Pump and 6N509 Torque Control
parts are shown on Pages 126 & 129
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-1352 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N1352 GOVERNOR AND FUEL INJECTION PUMP GROUP
6N1864 Governor & Fuel Injection Pump & 6N509 Torque Control parts
are shown on Page 129
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2604 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2604 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 9N1351 Governor and Fuel Injection Pump Group shown on Page 125
9N2603 Pump and 9N683 Shut-off parts are shown on Pages 130 through 133,
143 & 144
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2431 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2431 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 40S1 to 40S82487 inclusive
9L6061 Governor and Fuel Injection Pump parts are shown on Page 128
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2431 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2431 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 40S82488-Up
9L6061 Governor and Fuel Injection Pump parts are shown on Page 128
GOVERNOR AND FUEL INJECTION PUMP GROUP
9L-6061 GOVERNOR AND FUEL INJECTION PUMP GROUP
9L6061 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 9N2431 Governor and Fuel Injection Pump Group shown on Page 127
6N1863 Governor and Fuel Injection Pump and 9N683 Electric Shut-Off parts are shown on Pages 134 through 141, 143 & 144
GOV & FUEL INJ PUMP GP
6N-1864 GOV & FUEL INJ PUMP GP
6N1864 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 9N1351 & 9N1352 Governor & Fuel Injection Pump Groups shown on Page 125
6N1863 Governor & Fuel Injection Pump & 9N683 Shut-Off parts are shown on
Pages 134 through 141, 143 & 144
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2603 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2603 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Part of 9N2604 Governor & Fuel Injection Pump Group shown on Page 126
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2603 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2603 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Part of 9N2604 Governor & Fuel Injection Pump Group shown on Page 126
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2603 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2603 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4
Part of 9N2604 Governor & Fuel Injection Pump Group shown on Page 126
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2603 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2603 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4
Part of 9N2604 Governor and Fuel Injection Pump Group shown on Page 126
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4--Type 1
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4--Type 1
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4--Type 1
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4--Type 1
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4--Type 2
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4--Type 2
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4--Type 2
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4--Type 2
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4--Type 3
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4--Type 3
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4--Type 3
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4--Type 3
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-2337 GOV & FUEL INJ PUMP GP
6N2337 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 9N495 Governor and Fuel Injection Pump Group shown on Page 124
6N509 Control and 6N1863 Pump parts are shown on Pages 129 and 134 through 141
DRIVE GP-GOVERNOR & FUEL PUMP
9N-8062 DRIVE GP-GOVERNOR & FUEL PUMP
9N8062 GOVERNOR AND FUEL PUMP DRIVE GROUP
DRIVE GP-GOVERNOR & FUEL PUMP
9N-0740 DRIVE GP-GOVERNOR & FUEL PUMP
9N740 GOVERNOR AND FUEL PUMP DRIVE GROUP
INJECTION GP-CETANE
INJECTION GP-CETANE
9N-3771 INJECTION GP-CETANE
9N3771 CETANE INJECTION GROUP--Field Installation
Note: Reduces white smoke when starting engine in cold temperatures
LINES GP-FUEL
LINES GP-FUEL INJECTION
9N-0119 LINES GP-FUEL INJECTION
9N119 FUEL INJECTION LINES GROUP
Serial No. 40S1 to 40S2475 inclusive
LINES GP-FUEL INJECTION
9N-0119 LINES GP-FUEL INJECTION
9N119 FUEL INJECTION LINES GROUP
Serial No. 40S2476-Up
LINES GP-FUEL INJECTION
9N-3706 LINES GP-FUEL INJECTION
9N3706 FUEL INJECTION LINES GROUP
Serial No. 40S1 to 40S65910 inclusive
LINES GP-FUEL INJECTION
9N-3706 LINES GP-FUEL INJECTION
9N3706 FUEL INJECTION LINES GROUP
Serial No. 40S65911-Up
LINES GP-FUEL FILTER
9N-0435 LINES GP-FUEL FILTER
9N435 FUEL FILTER LINES GROUP
Serial No. 40S1 to 40S3007 inclusive
LINES GP-FUEL FILTER
9N-0435 LINES GP-FUEL FILTER
9N435 FUEL FILTER LINES GROUP
Serial No. 40S3008 to 40S8560 inclusive
LINES GP-FUEL FILTER
9N-0435 LINES GP-FUEL FILTER
9N435 FUEL FILTER LINES GROUP
Serial No. 40S8561-Up
LINES GP-FUEL FILTER
9N-0434 LINES GP-FUEL FILTER
9N434 FUEL FILTER LINES GROUP
Serial No. 40S1 to 40S3007 inclusive
LINES GP-FUEL FILTER
9N-0434 LINES GP-FUEL FILTER
9N434 FUEL FILTER LINES GROUP
Serial No. 40S3008 to 40S8560 inclusive
LINES GP-FUEL FILTER
9N-0434 LINES GP-FUEL FILTER
9N434 FUEL FILTER LINES GROUP
Serial No. 40S8561-Up
FUEL FILTER LINES GROUP
9N-1054 FUEL FILTER LINES GROUP
9N1054 FUEL FILTER LINES GROUP
Serial No. 40S1 to 40S3282 inclusive
FUEL FILTER LINES GROUP
9N-1054 FUEL FILTER LINES GROUP
9N1054 FUEL FILTER LINES GROUP
Serial No. 40S3283 to 40S8560 inclusive
FUEL FILTER LINES GROUP
9N-1054 FUEL FILTER LINES GROUP
9N1054 FUEL FILTER LINES GROUP
Serial No. 40S8561-Up
LINES GP-FUEL FILTER
9N-1945 LINES GP-FUEL FILTER
9N1945 FUEL FILTER LINES GROUP
Serial No. 40S5137 to 40S8560 inclusive
LINES GP-FUEL FILTER
9N-1945 LINES GP-FUEL FILTER
9N1945 FUEL FILTER LINES GROUP
Serial No. 40S8561-Up
LINES GP-FUEL FILTER
6N-2267 LINES GP-FUEL FILTER
6N2267 FUEL FILTER LINES GROUP
Serial No. 40S46794-Up
MISCELLANEOUS INFORMATION
FASTENER GP-FUEL PUMP HOUSING
9L-6925 FASTENER GP-FUEL PUMP HOUSING
9L6925 FUEL SYSTEM FASTENER GROUP
PUMP GP-FUEL INJECTION
9N-0495 PUMP GP-GOV DRV,FUEL INJ & TFR
9N495 GOVERNOR AND FUEL INJECTION PUMP GROUP
Provides Field Replacement for 9N1351 and 9N1352 when used in
conjunction with 9N683 Shut-Off Group
GOV & FUEL INJ PUMP GP
9N-1351 GOV & FUEL INJ PUMP GP
9N1351 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2604 & 6N1864 Governor & Fuel Injection Pump and 6N509 Torque Control
parts are shown on Pages 126 & 129
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-1352 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N1352 GOVERNOR AND FUEL INJECTION PUMP GROUP
6N1864 Governor & Fuel Injection Pump & 6N509 Torque Control parts
are shown on Page 129
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2604 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2604 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 9N1351 Governor and Fuel Injection Pump Group shown on Page 125
9N2603 Pump and 9N683 Shut-off parts are shown on Pages 130 through 133,
143 & 144
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2431 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2431 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 40S1 to 40S82487 inclusive
9L6061 Governor and Fuel Injection Pump parts are shown on Page 128
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2431 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2431 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 40S82488-Up
9L6061 Governor and Fuel Injection Pump parts are shown on Page 128
GOVERNOR AND FUEL INJECTION PUMP GROUP
9L-6061 GOVERNOR AND FUEL INJECTION PUMP GROUP
9L6061 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 9N2431 Governor and Fuel Injection Pump Group shown on Page 127
6N1863 Governor and Fuel Injection Pump and 9N683 Electric Shut-Off parts are shown on Pages 134 through 141, 143 & 144
GOV & FUEL INJ PUMP GP
6N-1864 GOV & FUEL INJ PUMP GP
6N1864 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 9N1351 & 9N1352 Governor & Fuel Injection Pump Groups shown on Page 125
6N1863 Governor & Fuel Injection Pump & 9N683 Shut-Off parts are shown on
Pages 134 through 141, 143 & 144
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2603 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2603 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Part of 9N2604 Governor & Fuel Injection Pump Group shown on Page 126
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2603 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2603 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Part of 9N2604 Governor & Fuel Injection Pump Group shown on Page 126
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2603 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2603 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4
Part of 9N2604 Governor & Fuel Injection Pump Group shown on Page 126
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2603 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N2603 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4
Part of 9N2604 Governor and Fuel Injection Pump Group shown on Page 126
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4--Type 1
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4--Type 1
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4--Type 1
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4--Type 1
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4--Type 2
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4--Type 2
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4--Type 2
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4--Type 2
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4--Type 3
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4--Type 3
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4--Type 3
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4--Type 3
Part of 9L6061, 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 128, 129 & 142
GOV & FUEL INJ PUMP GP
6N-2337 GOV & FUEL INJ PUMP GP
6N2337 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 9N495 Governor and Fuel Injection Pump Group shown on Page 124
6N509 Control and 6N1863 Pump parts are shown on Pages 129 and 134 through 141
DRIVE GP-GOVERNOR & FUEL PUMP
9N-8062 DRIVE GP-GOVERNOR & FUEL PUMP
9N8062 GOVERNOR AND FUEL PUMP DRIVE GROUP
DRIVE GP-GOVERNOR & FUEL PUMP
9N-0740 DRIVE GP-GOVERNOR & FUEL PUMP
9N740 GOVERNOR AND FUEL PUMP DRIVE GROUP
INJECTION GP-CETANE
9N-3771 INJECTION GP-CETANE
9N3771 CETANE INJECTION GROUP--Field Installation
Note: Reduces white smoke when starting engine in cold temperatures
FASTENER GP-FUEL PUMP HOUSING
9L-6925 FASTENER GP-FUEL PUMP HOUSING
9L6925 FUEL SYSTEM FASTENER GROUP
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
4N3287 FUEL PRIMING PUMP GROUP
PUMP GP-FUEL PRIMING
4N-4314 PUMP GP-FUEL PRIMING
4N4314 FUEL PRIMING PUMP GROUP
PUMP GP-FUEL TRANSFER
9N-0495 PUMP GP-GOV DRV,FUEL INJ & TFR
9N495 GOVERNOR AND FUEL INJECTION PUMP GROUP
Provides Field Replacement for 9N1351 and 9N1352 when used in
conjunction with 9N683 Shut-Off Group
8N-3569 PUMP GP-FUEL
8N3569 FUEL PUMP GROUP--Boost--24 Volt--Field Installation
Note: Provides positive pressure to the sleeve metering fuel system components
on the suction side of the fuel transfer pump
PUMP GP-FUEL
9N-5458 PUMP GP-FUEL
9N5458 FUEL PUMP GROUP--Boost--12 Volt--Field Installation
Note: Provides positive pressure to the sleeve metering fuel system components
on the suction side of the fuel transfer pump
SEPARATOR GP-WATER
SEPARATOR GP-WATER
7N-0950 SEPARATOR GP-WATER
7N950 WATER SEPARATOR GROUP
AN ATTACHMENT
TORQUE CONTROL GP
TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP
6N509 TORQUE CONTROL GROUP
Part of 9N1351, 9N1352 & 6N2337 Governor & Fuel Injection Pump Groups
shown on Pages 125 & 142

Information:

(For parts list, see above)

Service Magazine
New Camshaft Rear Bearing For The Sleeve Metering Fuel System{1253}
1978/09/04
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Engine News
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems
1977/10/12
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Engine News
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems
1977/10/12
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Truck Engine News
New Seal Used On Governor Control Shaft
1982/12/08
New Spring Used In Governor Control Groups
1992/04/01
Engine News
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power
1978/04/05
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Service Magazine
New Governor Spring Available For Specific Engine Applications{1264,1265}
1981/02/23
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
New Shutoff Solenoid Group Used{1259}
1983/03/21
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power{1265,1269}
1978/03/27
Engine News
New Pistons And Timing Advance Unit Give Better Emissions Control And Easier Starts
1979/04/04
Service Magazine
New Pistons And Timing Advance Unit Give Better Emissions Control And Easier Starts{1214,1272}
1979/04/02
Engine News
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Service Magazine
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Truck Engine News
Use 6V4069 Body Group To Remove Tapered Drive Sleeve
1981/07/07
Tachometer Drive Is Now An Attachment
1985/08/01
Engine News
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter
1979/04/25
Service Magazine
Tachometer Drive Is Now An Attachment{1166,1250,7450,7452,7487}
1985/08/12
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter{7462}
1979/04/02
Truck Engine News
Wrong Water Separator Element Will Not Remove Water
1982/06/23
Improved Water Separator Group Used
1982/06/23
New Fuel Priming Pump Assembly Used In Fuel Priming Pump Group{1258}
1994/09/01
Troubleshooting Reminder For Low Power Or Intermittent Low Power Symptoms {1250,1252,1256,1260,1261,1273}
1998/09/01
Engine News
Improvements Made To Water Separator Groups
1980/04/30
Use Only Caterpillar Water Separator Elements
1980/10/01
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Water Separators Needed On Engines In The Field With SMFS
1977/12/14
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage
1978/04/19
New Type Seal Used On Water Separator Elements
1978/05/03
Specifications
Fuel Filter Base
3208 TRUCK ENGINE
Disassembly and Assembly
Fuel Filter Base
3208 TRUCK ENGINE
Service Magazine
Improvements Made To Water Separator Groups{1263}
1980/05/05
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
Wrong Water Separator Element Will Not Remove Water{1263}
1982/05/17
Improved Water Separator Group Used {1263}
1982/05/31
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Special Instruction
Installation Of 8N9754 Fuel Heater Group{1296}
Installation Of 8N9754 Fuel Heater Group{1296}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Truck Engine News
New Governor Spring Available For Specific Engine Applications
1981/03/06
Clean Electrical Contacts In Exhaust Gas Recirculation (e.g.r.) Switch Group And Cover Assembly Before Installation
1981/04/09
Electrical Information For Egr (exhaust Gas Recirculation) Systems On 3208 Truck Engines So Equipped
1981/04/09
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/09
New 6V3060 EGR System Tester Group Available
1981/05/12
Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines
1981/08/18
Bent Lever For Fuel Shut-off Solenoid Can Cause Low Engine Performance
1982/02/17
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/27
New Seal Used On Governor Control Shaft
1982/12/08
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/11/01
Check Valve Added To Keep Air From Entering Fuel System
1988/10/01
Governor Springs For Sleeve Metering Fuel Systems
1990/05/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/01
Engine News
Improvements Made To Fuel Injection Pump And Governor Group
1979/03/14
New Pistons And Timing Advance Unit Give Better Emissions Control And Easier Starts
1979/04/04
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
Timing Advance Mechanism Used In Certain 3208 Truck Engines In Ford Trucks
1979/08/08
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
Important: Use Only 12 Volts Direct Current To Boost Start 3208 Truck Engines Equipped With Exhaust Gas Recirculation Systems
1980/04/09
Low Emission Truck Engines With Exhaust Gas Recirculation (EGR) Systems
1977/01/28
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Service Tools For Low Emission Truck Engines With EGR
1977/06/29
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Changes To The Injection Pump And The Fuel Setting
1977/09/28
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power
1978/04/05
9N3700 Or 9N3299 Nozzle Assemblies Must Be Used On 3208 Engines That Are Equipped With Exhaust Gas Recirculation (EGR)
1978/04/05
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
New Control Cover Gives Better Control Of Exhaust Gas Recirculation System
1978/11/15
New Fuel Injection Nozzles Are Used In 3208 Truck Engines When Equipped With EGR
1978/11/15
A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group
1978/12/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
3208 TRUCK ENGINE
Governor
3208 TRUCK ENGINE
Fuel Transfer Pump
3208 TRUCK ENGINE
Automatic Timing Advance Unit
3208 TRUCK ENGINE
Drive Gear For The Injection Pump<BR> (Earlier Bolt)
3208 TRUCK ENGINE
Drive Gear For The Injection Pump<BR> (Later Bolt)
3208 TRUCK ENGINE
Automatic Timing Advance Unit 3&deg; For EGR Engine
3208 TRUCK ENGINE
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE
Check Valve And Bypass Valve
3208 TRUCK ENGINE
Fuel Injection Pumps
3208 TRUCK ENGINE
Fuel Transfer Pump
3208 TRUCK ENGINE
Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE
Governor
3208 TRUCK ENGINE
Fuel Injection Pump Housing
3208 TRUCK ENGINE
Automatic Timing Advance
3208 TRUCK ENGINE
Service Magazine
New Governor Spring Available For Specific Engine Applications{1264,1265}
1981/02/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines{1288,0374}
1981/06/29
Certification Film Necessary On Engines Adjusted For High Altitude Operation{7557,1251,1257,1264}
1981/08/10
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Cross Link Between Fuel Racks Has Smoother Surface{1250,1257}
1985/03/11
Changes To Naturally Aspirated Truck Engines For 1985{1000,1200,1214,1218,1250,1251,1254}
1985/04/08
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Changes To The Injection Pump And The Fuel Setting{1251,1257}
1977/09/19
Washer Removed From Variable Timing Unit{1206,1272}
1977/10/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power{1265,1269}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group{1288,7462}
1978/11/20
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281,1286}
1979/03/05
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
Special Instruction
Installation Of 8N9754 Fuel Heater Group{1296}
Installation Of 8N9754 Fuel Heater Group{1296}
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Repair Kit For Diesel Fuel Heater Available {1296}
1983/04/18
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Truck Engine News
Cetane Injection Group Uses New Orifice, Tee and Seals
1984/11/07
Special Instruction
INSTALLATION, OPERATION AND MAINTENANCE OF 9N3771 INJECTION GROUP (CETANE){1250}
INSTALLATION, OPERATION AND MAINTENANCE OF 9N3771 INJECTION GROUP (CETANE){1250}
Service Magazine
Cetane Injection Group Uses New Orifice, Tee and Seals{1250,1274}
1984/10/29
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Truck Engine News
Fuel Pressure Relief Valve Is Shown Inverted (wrong End Up) In Parts Book Illustrations
1981/04/09
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/07/07
Wrong Water Separator Element Will Not Remove Water
1982/06/23
Improved Water Separator Group Used
1982/06/23
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/01
Fuel Line Hoses Can Be Damaged In Locations Between Engine And Vehicle Components
1982/09/01
Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Tune-up Kit And Remanufactured Nozzles Available
1984/09/26
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/11/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DlFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
Shutoff Valve In Fuel Return Lines{1274,1279}
1995/10/01
An Improved O-Ring Seal And Proper Use Of Adapter Locks Reduces Oil Leaks{1252}
1996/10/01
Engine News
New Fuel Injection Nozzles Are Used In 3208 Engines
1979/03/14
Do Not Use Later 9N3979 Nozzle Assemblies In Place Of Earlier Nozzle Assemblies
1979/05/23
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines
1979/06/06
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies
1979/06/20
Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures
1980/04/30
Improvements Made To Water Separator Groups
1980/04/30
Use Only Caterpillar Water Separator Elements
1980/10/01
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line
1977/09/28
Water Separators Needed On Engines In The Field With SMFS
1977/12/14
9N3700 Or 9N3299 Nozzle Assemblies Must Be Used On 3208 Engines That Are Equipped With Exhaust Gas Recirculation (EGR)
1978/04/05
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage
1978/04/19
New Type Seal Used On Water Separator Elements
1978/05/03
New Fuel Injection Nozzles Are Used In 3208 Truck Engines When Equipped With EGR
1978/11/15
Service Letter-NACD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CFEL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CSARL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Americas
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Specifications
Injection Nozzle<BR> (9L6969)
3208 TRUCK ENGINE
Fuel Filter Base
3208 TRUCK ENGINE
Service Letter-China
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-APD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Disassembly and Assembly
Fuel Injection Lines
3208 TRUCK ENGINE
Fuel Filter Base
3208 TRUCK ENGINE
Fuel Injection Nozzles
3208 TRUCK ENGINE
Service Magazine
Improvements Made To Water Separator Groups{1263}
1980/05/05
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Larger Valve Springs{1108,1101,1252}
1981/05/04
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Wrong Water Separator Element Will Not Remove Water{1263}
1982/05/17
Improved Water Separator Group Used {1263}
1982/05/31
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/09
Fuel Line Hoses Can Be Damaged In Locations Between Engine And Vehicle Components{1274}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
9N3700 Or 9N3299 Nozzle Assemblies Must Be Used On 3208 Engines That Are Equipped With Exhaust Gas Recirculation (EGR){1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New Fuel Injection Nozzles Are Used In 3208 Truck Engines When Equipped With EGR{1254}
1978/10/30
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Do Not Use Later 9N3979 Nozzle Assemblies In Plate Of Earlier Nozzle Assemblies{1254}
1979/05/21
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines{7555,1254}
1979/05/21
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Truck Engine News
Identification Of Remanufactured Direct Injection Fuel Nozzles (DlFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
Service Letter-NACD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Magazine
Larger Valve Springs{1108,1101,1252}
1981/05/04
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/09
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
9N3700 Or 9N3299 Nozzle Assemblies Must Be Used On 3208 Engines That Are Equipped With Exhaust Gas Recirculation (EGR){1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Fuel Injection Nozzles Are Used In 3208 Truck Engines When Equipped With EGR{1254}
1978/10/30
New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Do Not Use Later 9N3979 Nozzle Assemblies In Plate Of Earlier Nozzle Assemblies{1254}
1979/05/21
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines{7555,1254}
1979/05/21
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Engine News
New Electric Service Meter Used
1978/12/13
Service Magazine
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
New Electric Service Meter Used{7480}
1978/12/11
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Truck Engine News
Do Not Adjust The Fuel Setting Or High Idle Higher Than Necessary
1981/03/06
New Governor Spring Available For Specific Engine Applications
1981/03/06
Clean Electrical Contacts In Exhaust Gas Recirculation (e.g.r.) Switch Group And Cover Assembly Before Installation
1981/04/09
Electrical Information For Egr (exhaust Gas Recirculation) Systems On 3208 Truck Engines So Equipped
1981/04/09
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/09
Fuel Pressure Relief Valve Is Shown Inverted (wrong End Up) In Parts Book Illustrations
1981/04/09
New 6V3060 EGR System Tester Group Available
1981/05/12
Use 6V4069 Body Group To Remove Tapered Drive Sleeve
1981/07/07
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/07/07
Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines
1981/08/18
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation
1981/09/09
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System
1981/09/09
Bent Lever For Fuel Shut-off Solenoid Can Cause Low Engine Performance
1982/02/17
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/31
Wrong Water Separator Element Will Not Remove Water
1982/06/23
Improved Water Separator Group Used
1982/06/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/01
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems
1982/09/01
Fuel Line Hoses Can Be Damaged In Locations Between Engine And Vehicle Components
1982/09/01
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/27
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/27
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
New Seal Used On Governor Control Shaft
1982/12/08
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/12/21
Tune-up Kit And Remanufactured Nozzles Available
1984/09/26
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Cross Link Between Fuel Racks Has Smoother Surface
1985/03/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Anti-seize Compound And/or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/11/01
Fuel Sulfur Analyzer Available
1986/01/01
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
New Engine Timing Indicator Group Available
1986/07/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals
1986/11/01
Two New Cold Weather Fuel Heaters Available
1986/11/01
Incorrect Use Of Fuel Heaters Can Reduce Engine Power
1987/02/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/11/01
Check Valve Added To Keep Air From Entering Fuel System
1988/10/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Governor Springs For Sleeve Metering Fuel Systems
1990/05/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DlFN)
1992/04/01
New Fuel Priming Pump Assembly Used In Fuel Priming Pump Group{1258}
1994/09/01
New &quot;Fuel System Reuse And Salvage Guides&quot; Reference Manual Available{1250}
1997/04/01
Lubricity Limit Added To Preferred Distillate Fuel Recommendation{1280}
1997/08/01
Engine News
New Fuel Injection Nozzles Are Used In 3208 Engines
1979/03/14
Improvements Made To Fuel Injection Pump And Governor Group
1979/03/14
New Pistons And Timing Advance Unit Give Better Emissions Control And Easier Starts
1979/04/04
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter
1979/04/25
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
Do Not Use Later 9N3979 Nozzle Assemblies In Place Of Earlier Nozzle Assemblies
1979/05/23
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines
1979/06/06
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies
1979/06/20
Timing Advance Mechanism Used In Certain 3208 Truck Engines In Ford Trucks
1979/08/08
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Important: Use Only 12 Volts Direct Current To Boost Start 3208 Truck Engines Equipped With Exhaust Gas Recirculation Systems
1980/04/09
Improvements Made To Water Separator Groups
1980/04/30
Use Only Caterpillar Water Separator Elements
1980/10/01
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Rack Shut-Off Solenoid Can Be Removed And Engine Started When There Is An Emergency
1980/11/12
Low Emission Truck Engines With Exhaust Gas Recirculation (EGR) Systems
1977/01/28
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems
1977/02/28
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Service Tools For Low Emission Truck Engines With EGR
1977/06/29
Changes To The Injection Pump And The Fuel Setting
1977/09/28
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line
1977/09/28
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems
1977/10/12
Water Separators Needed On Engines In The Field With SMFS
1977/12/14
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power
1978/04/05
9N3700 Or 9N3299 Nozzle Assemblies Must Be Used On 3208 Engines That Are Equipped With Exhaust Gas Recirculation (EGR)
1978/04/05
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage
1978/04/19
New Type Seal Used On Water Separator Elements
1978/05/03
New Camshaft Rear Bearing For The Sleeve Metering Fuel System
1978/08/30
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
New Control Cover Gives Better Control Of Exhaust Gas Recirculation System
1978/11/15
New Fuel Injection Nozzles Are Used In 3208 Truck Engines When Equipped With EGR
1978/11/15
A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group
1978/12/13
New Electric Service Meter Used
1978/12/13
Special Instruction
INSTALLATION, OPERATION AND MAINTENANCE OF 9N3771 INJECTION GROUP (CETANE){1250}
INSTALLATION, OPERATION AND MAINTENANCE OF 9N3771 INJECTION GROUP (CETANE){1250}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Letter-NACD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CFEL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CSARL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Americas
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-China
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-APD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Improvements Made To Water Separator Groups{1263}
1980/05/05
New Governor Spring Available For Specific Engine Applications{1264,1265}
1981/02/23
Do Not Adjust The Fuel Setting Or High Idle Higher Than Necessary{1257}
1981/02/23
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Troubleshooting Water In Shut-Off Solenoid Housing{1259}
1981/06/08
Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines{1288,0374}
1981/06/29
Certification Film Necessary On Engines Adjusted For High Altitude Operation{7557,1251,1257,1264}
1981/08/10
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Be Sure To Use Correct Water Temperature Regulators{1355}
1982/05/10
Wrong Water Separator Element Will Not Remove Water{1263}
1982/05/17
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Fuel Line Hoses Can Be Damaged In Locations Between Engine And Vehicle Components{1274}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Field Conversion Procedure For EPA Certified On-Highway Truck And On-Highway Vehicle Engines{0374,0375,7557,1250}
1982/10/11
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Shutoff Solenoid Group Used{1259}
1983/03/21
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Why MPG Suffers In Cold Weather{1250,1280}
1983/11/14
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
Causes Of White Exhaust Smoke During Cold Weather Starts And Ways To Reduce It{1250}
1984/03/05
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Cross Link Between Fuel Racks Has Smoother Surface{1250,1257}
1985/03/11
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Changes To Naturally Aspirated Truck Engines For 1985{1000,1200,1214,1218,1250,1251,1254}
1985/04/08
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Tachometer Drive Is Now An Attachment{1166,1250,7450,7452,7487}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems{1259}
1977/03/07
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Changes To The Injection Pump And The Fuel Setting{1251,1257}
1977/09/19
Washer Removed From Variable Timing Unit{1206,1272}
1977/10/03
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
The Causes And Reduction Of White Exhaust Smoke During Cold Engine Starts; Maintenance Aids Available To Decrease This Problem{1250,1383,1050}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Camshaft Rear Bearing For The Sleeve Metering Fuel System{1253}
1978/09/04
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Fuel Injection Nozzles Are Used In 3208 Truck Engines When Equipped With EGR{1254}
1978/10/30
A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group{1288,7462}
1978/11/20
New Coolant Temperature Regulator Has Flat Washer-Type By-Pass Valve{1355}
1978/11/27
New Electric Service Meter Used{7480}
1978/12/11
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281,1286}
1979/03/05
New Pistons And Timing Advance Unit Give Better Emissions Control And Easier Starts{1214,1272}
1979/04/02
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter{7462}
1979/04/02
Two Fuel Pressure Pumps Are Available To Increase Fuel Pressure{1250,1295}
1979/05/14
Do Not Use Later 9N3979 Nozzle Assemblies In Plate Of Earlier Nozzle Assemblies{1254}
1979/05/21
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines{7555,1254}
1979/05/21
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05
Do Not Use Later 9N3979 Nozzle Assemblies In Plate Of Earlier Nozzle Assemblies{1254}
1979/05/21
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines{7555,1254}
1979/05/21
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Truck Engine News
New Governor Spring Available For Specific Engine Applications
1981/03/06
Clean Electrical Contacts In Exhaust Gas Recirculation (e.g.r.) Switch Group And Cover Assembly Before Installation
1981/04/09
Electrical Information For Egr (exhaust Gas Recirculation) Systems On 3208 Truck Engines So Equipped
1981/04/09
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/09
New 6V3060 EGR System Tester Group Available
1981/05/12
Use 6V4069 Body Group To Remove Tapered Drive Sleeve
1981/07/07
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/07/07
Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines
1981/08/18
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System
1981/09/09
Bent Lever For Fuel Shut-off Solenoid Can Cause Low Engine Performance
1982/02/17
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/31
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/01
Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/27
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
New Seal Used On Governor Control Shaft
1982/12/08
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/12/21
Tune-up Kit And Remanufactured Nozzles Available
1984/09/26
Cetane Injection Group Uses New Orifice, Tee and Seals
1984/11/07
Identification Of Camshaft Groups And Valve Mechanism Groups
1984/12/17
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Cross Link Between Fuel Racks Has Smoother Surface
1985/03/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
New 8T2998 Lubricant Available
1986/02/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/11/01
Check Valve Added To Keep Air From Entering Fuel System
1988/10/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Governor Springs For Sleeve Metering Fuel Systems
1990/05/01
New Spring Used In Governor Control Groups
1992/04/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DlFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/01
Engine News
New Fuel Injection Nozzles Are Used In 3208 Engines
1979/03/14
Improvements Made To Fuel Injection Pump And Governor Group
1979/03/14
New Pistons And Timing Advance Unit Give Better Emissions Control And Easier Starts
1979/04/04
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
Do Not Use Later 9N3979 Nozzle Assemblies In Place Of Earlier Nozzle Assemblies
1979/05/23
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines
1979/06/06
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies
1979/06/20
Timing Advance Mechanism Used In Certain 3208 Truck Engines In Ford Trucks
1979/08/08
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
Important: Use Only 12 Volts Direct Current To Boost Start 3208 Truck Engines Equipped With Exhaust Gas Recirculation Systems
1980/04/09
Low Emission Truck Engines With Exhaust Gas Recirculation (EGR) Systems
1977/01/28
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Service Tools For Low Emission Truck Engines With EGR
1977/06/29
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Changes To The Injection Pump And The Fuel Setting
1977/09/28
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power
1978/04/05
9N3700 Or 9N3299 Nozzle Assemblies Must Be Used On 3208 Engines That Are Equipped With Exhaust Gas Recirculation (EGR)
1978/04/05
New Camshaft Rear Bearing For The Sleeve Metering Fuel System
1978/08/30
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
New Control Cover Gives Better Control Of Exhaust Gas Recirculation System
1978/11/15
New Fuel Injection Nozzles Are Used In 3208 Truck Engines When Equipped With EGR
1978/11/15
A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group
1978/12/13
Special Instruction
INSTALLATION, OPERATION AND MAINTENANCE OF 9N3771 INJECTION GROUP (CETANE){1250}
INSTALLATION, OPERATION AND MAINTENANCE OF 9N3771 INJECTION GROUP (CETANE){1250}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Service Letter-NACD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CFEL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CSARL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Americas
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Specifications
Fuel Injection Pump
3208 TRUCK ENGINE
Governor
3208 TRUCK ENGINE
Injection Nozzle<BR> (9L6969)
3208 TRUCK ENGINE
Fuel Transfer Pump
3208 TRUCK ENGINE
Automatic Timing Advance Unit
3208 TRUCK ENGINE
Drive Gear For The Injection Pump<BR> (Earlier Bolt)
3208 TRUCK ENGINE
Drive Gear For The Injection Pump<BR> (Later Bolt)
3208 TRUCK ENGINE
Automatic Timing Advance Unit 3&deg; For EGR Engine
3208 TRUCK ENGINE
Service Letter-China
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE
Check Valve And Bypass Valve
3208 TRUCK ENGINE
Fuel Injection Pumps
3208 TRUCK ENGINE
Fuel Transfer Pump
3208 TRUCK ENGINE
Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE
Governor
3208 TRUCK ENGINE
Fuel Injection Pump Housing
3208 TRUCK ENGINE
Rocker Shafts And Push Rods
3208 TRUCK ENGINE
Rocker Shafts
3208 TRUCK ENGINE
Fuel Injection Nozzles
3208 TRUCK ENGINE
Automatic Timing Advance
3208 TRUCK ENGINE
Service Magazine
New Governor Spring Available For Specific Engine Applications{1264,1265}
1981/02/23
High Concentration Of Aluminum In Oil Analysis Can Be The Result Of Rocker Arm Support Wear{1318,1102}
1981/03/02
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines{1288,0374}
1981/06/29
Certification Film Necessary On Engines Adjusted For High Altitude Operation{7557,1251,1257,1264}
1981/08/10
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Use Correct Torque To Prevent Broken Rocker Arm Shafts{1102}
1982/07/05
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/09
New Thrust Washer Can Prevent Wrong Oil Sample Readings{1102}
1982/08/23
New Rocker Arm Assemblies Used {1102}
1982/09/13
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Cetane Injection Group Uses New Orifice, Tee and Seals{1250,1274}
1984/10/29
Identification Of Camshaft Groups And Valve Mechanism Groups{1210,1102}
1984/11/26
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Changes To Naturally Aspirated Truck Engines For 1985{1000,1200,1214,1218,1250,1251,1254}
1985/04/08
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Changes To The Injection Pump And The Fuel Setting{1251,1257}
1977/09/19
Washer Removed From Variable Timing Unit{1206,1272}
1977/10/03
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
9N3700 Or 9N3299 Nozzle Assemblies Must Be Used On 3208 Engines That Are Equipped With Exhaust Gas Recirculation (EGR){1254}
1978/03/27
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power{1265,1269}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Camshaft Rear Bearing For The Sleeve Metering Fuel System{1253}
1978/09/04
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New Fuel Injection Nozzles Are Used In 3208 Truck Engines When Equipped With EGR{1254}
1978/10/30
A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group{1288,7462}
1978/11/20
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281,1286}
1979/03/05
New Pistons And Timing Advance Unit Give Better Emissions Control And Easier Starts{1214,1272}
1979/04/02
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
Do Not Use Later 9N3979 Nozzle Assemblies In Plate Of Earlier Nozzle Assemblies{1254}
1979/05/21
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines{7555,1254}
1979/05/21
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Truck Engine News
New Fuel Priming Pump Assembly Used In Fuel Priming Pump Group{1258}
1994/09/01
Service Magazine
Improvements Made To Water Separator Groups{1263}
1980/05/05
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Improved Fuel Priming Pump Used{1258}
1987/04/20
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Truck Engine News
New Governor Spring Available For Specific Engine Applications
1981/03/06
Clean Electrical Contacts In Exhaust Gas Recirculation (e.g.r.) Switch Group And Cover Assembly Before Installation
1981/04/09
Electrical Information For Egr (exhaust Gas Recirculation) Systems On 3208 Truck Engines So Equipped
1981/04/09
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/09
New 6V3060 EGR System Tester Group Available
1981/05/12
Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines
1981/08/18
Bent Lever For Fuel Shut-off Solenoid Can Cause Low Engine Performance
1982/02/17
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/31
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/27
New Seal Used On Governor Control Shaft
1982/12/08
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/12/21
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Anti-seize Compound And/or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/11/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/11/01
Check Valve Added To Keep Air From Entering Fuel System
1988/10/01
Governor Springs For Sleeve Metering Fuel Systems
1990/05/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/01
Engine News
Improvements Made To Fuel Injection Pump And Governor Group
1979/03/14
New Pistons And Timing Advance Unit Give Better Emissions Control And Easier Starts
1979/04/04
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
Timing Advance Mechanism Used In Certain 3208 Truck Engines In Ford Trucks
1979/08/08
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
Important: Use Only 12 Volts Direct Current To Boost Start 3208 Truck Engines Equipped With Exhaust Gas Recirculation Systems
1980/04/09
Low Emission Truck Engines With Exhaust Gas Recirculation (EGR) Systems
1977/01/28
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Service Tools For Low Emission Truck Engines With EGR
1977/06/29
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power
1978/04/05
9N3700 Or 9N3299 Nozzle Assemblies Must Be Used On 3208 Engines That Are Equipped With Exhaust Gas Recirculation (EGR)
1978/04/05
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
New Control Cover Gives Better Control Of Exhaust Gas Recirculation System
1978/11/15
New Fuel Injection Nozzles Are Used In 3208 Truck Engines When Equipped With EGR
1978/11/15
A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group
1978/12/13
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
3208 TRUCK ENGINE
Governor
3208 TRUCK ENGINE
Fuel Transfer Pump
3208 TRUCK ENGINE
Automatic Timing Advance Unit
3208 TRUCK ENGINE
Drive Gear For The Injection Pump<BR> (Earlier Bolt)
3208 TRUCK ENGINE
Drive Gear For The Injection Pump<BR> (Later Bolt)
3208 TRUCK ENGINE
Automatic Timing Advance Unit 3&deg; For EGR Engine
3208 TRUCK ENGINE
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE
Check Valve And Bypass Valve
3208 TRUCK ENGINE
Fuel Injection Pumps
3208 TRUCK ENGINE
Fuel Transfer Pump
3208 TRUCK ENGINE
Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE
Governor
3208 TRUCK ENGINE
Fuel Injection Pump Housing
3208 TRUCK ENGINE
Automatic Timing Advance
3208 TRUCK ENGINE
Service Magazine
New Governor Spring Available For Specific Engine Applications{1264,1265}
1981/02/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines{1288,0374}
1981/06/29
Certification Film Necessary On Engines Adjusted For High Altitude Operation{7557,1251,1257,1264}
1981/08/10
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
Changes To Naturally Aspirated Truck Engines For 1985{1000,1200,1214,1218,1250,1251,1254}
1985/04/08
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Changes To The Injection Pump And The Fuel Setting{1251,1257}
1977/09/19
Washer Removed From Variable Timing Unit{1206,1272}
1977/10/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power{1265,1269}
1978/03/27
Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Camshaft Rear Bearing For The Sleeve Metering Fuel System{1253}
1978/09/04
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group{1288,7462}
1978/11/20
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281,1286}
1979/03/05
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
Two Fuel Pressure Pumps Are Available To Increase Fuel Pressure{1250,1295}
1979/05/14
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Service Magazine
Two Fuel Pressure Pumps Are Available To Increase Fuel Pressure{1250,1295}
1979/05/14
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Be Sure To Use Correct Water Temperature Regulators{1355}
1982/05/10
New Coolant Temperature Regulator Has Flat Washer-Type By-Pass Valve{1355}
1978/11/27
New Coolant Temperature Regulator Housing And Vent Line Valve Give Better Control Of Engine Cooling; Conversion Kits Available{1380,1355}
1979/10/22
Truck Engine News
Wrong Water Separator Element Will Not Remove Water
1982/06/23
Improved Water Separator Group Used
1982/06/23
Engine News
Improvements Made To Water Separator Groups
1980/04/30
Use Only Caterpillar Water Separator Elements
1980/10/01
Water Separators Needed On Engines In The Field With SMFS
1977/12/14
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage
1978/04/19
New Type Seal Used On Water Separator Elements
1978/05/03
Service Magazine
Improvements Made To Water Separator Groups{1263}
1980/05/05
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
Wrong Water Separator Element Will Not Remove Water{1263}
1982/05/17
Improved Water Separator Group Used {1263}
1982/05/31
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Engine News
Rack Shut-Off Solenoid Can Be Removed And Engine Started When There Is An Emergency
1980/11/12
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems
1977/02/28
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Service Magazine
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
New Shutoff Solenoid Group Used{1259}
1983/03/21
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Truck Engine News
New 6V3060 EGR System Tester Group Available
1981/05/12
Use 6V4069 Body Group To Remove Tapered Drive Sleeve
1981/07/07
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/07/07
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation
1981/09/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Fuel Sulfur Analyzer Available
1986/01/01
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Engine News
Timing Groups To Be Canceled
1980/07/09
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Service Magazine
Use 6V4069 Body Group To Remove Tapered Drive Sleeve{0611}
1981/05/11
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Socket Assembly To Tighten The Bolts That Fasten The Sleeve Levers To The Sleeve Shaft{0621,1250}
1977/04/25
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Truck Engine News
New Governor Spring Available For Specific Engine Applications
1981/03/06
Governor Springs For Sleeve Metering Fuel Systems
1990/05/01
Service Magazine
New Governor Spring Available For Specific Engine Applications{1264,1265}
1981/02/23
Do Not Adjust The Fuel Setting Or High Idle Higher Than Necessary{1257}
1981/02/23
Certification Film Necessary On Engines Adjusted For High Altitude Operation{7557,1251,1257,1264}
1981/08/10
Cross Link Between Fuel Racks Has Smoother Surface{1250,1257}
1985/03/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Engine News
Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures
1980/04/30

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.