AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9N3763 CYLINDER BLOCK SERVICE GROUP 3208 TRUCK ENGINE


BASIC ENGINE
MISCELLANEOUS INFORMATION
CYLINDER BLOCK GP
CRANKSHAFT GP

TRUCK ENGINE 3208 TRUCK ENGINE 40S
 3208 TRUCK ENGINE COVERING ENGINE ARRANGEMENTS 9L6082 9L6260 40S00001-UP UEG0894S 3208 40S   (1974)

BASIC ENGINE

MISCELLANEOUS INFORMATION
9N-3763 SERVICE GP-CYLINDER BLOCK
 

#UEG0894S0040
 

9N-3763: SERVICE GP-CYLINDER BLOCK

9N3763 CYLINDER BLOCK SERVICE GROUP
UEG0894S0040 UEG0894S
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9N-3761 Y [1] CYLINDER BLOCK GROUP  
  9L-6065 Y [1] CYLINDER BLOCK COVER GROUP  
  9N-3790 [1] BEARING FRONT MAIN  
  Y   SEPARATE ILLUSTRATION
 

#UEG0894S0041
 

9N-1250: SHORT BLOCK GP

9N1250 SHORT BLOCK GROUP--Replaced by 9N2139
FIELD INSTALLATION
UEG0894S0041 UEG0894S
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9L-6065 Y [1] CYLINDER BLOCK COVER GROUP  
  9N-0130 Y [1] CYLINDER BLOCK GROUP  
  9N-0150 Y [8] CONNECTING ROD AND PISTON GROUP  
  9N-0310 Y [1] CRANKSHAFT GROUP  
  9L-7816 [2] BOLT FLYWHEEL  
  Y   SEPARATE ILLUSTRATION
 

#UEG0894S0042
 

9N-2139: BLOCK GP-SHORT

9N2139 SHORT BLOCK GROUP--Field Installation
UEG0894S0042 UEG0894S
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9L-6065 Y [1] CYLINDER BLOCK COVER GROUP  
  9N-0150 Y [8] CONNECTING ROD AND PISTON GROUP  
    - OR -
  9N-2613 Y [8] CONNECTING ROD AND PISTON GROUP  
  9N-2017 Y [1] CRANKSHAFT GROUP  
  9N-3120 Y [1] CYLINDER BLOCK GROUP  
    - OR -
  9N-3551 Y [1] CYLINDER BLOCK GROUP  
  9L-7816 [2] BOLT FLYWHEEL .438 IN. X 1.69 IN.  
  Y   SEPARATE ILLUSTRATION
 

#UEG0894S0043
 

9N-5190: BLOCK GP-SHORT

9N5190 SHORT BLOCK GROUP--Field Installation
UEG0894S0043 UEG0894S
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9N-3761 Y [1] CYLINDER BLOCK GROUP  
  9N-2017 Y [1] CRANKSHAFT GROUP  
  9L-6065 Y [1] CYLINDER BLOCK COVER GROUP  
  9N-3538 Y [8] CONNECTING ROD AND PISTON GROUP  
  9L-7816 [2] FLYWHEEL BOLT .438 IN. X 1.69 IN.  
  Y   SEPARATE ILLUSTRATION
 

#UEG0894S0044
 

9L-6560: PANEL GP-CYLINDER BLOCK

9L6560 CYLINDER BLOCK PANEL GROUP
ALSO AN ATTACHMENT
c203350 UEG0894S
9L6560 PANEL GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0742 [1] PANEL ASSEM. (L.H.)  
    (Includes)
2. 066-7948 [2] BUMPER  
3. 9N-0741 [1] PANEL ASSEM. (R.H.)  
    (Includes)
4. 066-7948 [2] BUMPER  
5. 4B-3388 [6] BOLT  
6. 9N-0869 [6] WASHER  
7. 4N-9915 [6] GROMMET ASSEM.  
8. 9L-6692 [4] CLIP  
 

#UEG0894S0045
 

9N-0310: CRANKSHAFT GP

9N310 CRANKSHAFT GROUP
Also part of 9N1250 Short Block Group listed on Page 38
c205084 UEG0894S
9N0310 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0305 R [1] CRANKSHAFT AS  
    (EACH INCLUDES)
2. 9L-8336 [1] SLEEVE-WEAR  
3. 9N-0286 [1] KEY  
4. 9N-0299 [1] GEAR-CRANKSHAFT (51 TEETH)  
5. 9L-7946 [1]  
6. 9L-7945 C [4]  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0894S0046
 

9N-2017: CRANKSHAFT GP

9N2017 CRANKSHAFT GROUP
Also part of 9N2139 Short Block Group listed on Page 38
c219835 UEG0894S
9N2017 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0305 R [1] CRANKSHAFT ASSEM.  
    (Includes)
2. 9L-8336 [1] SLEEVE  
3. 9N-0286 [1] KEY  
4. 9N-0299 [1] GEAR (51 teeth)  
5. 8N-0731 [1] BEARING  
6. 8N-0730 [3] BEARING  
7. 6N-8745 [1] BEARING  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0894S0047
 

9N-0315: CRANKSHAFT GP

9N315 CRANKSHAFT GROUP
For Field Replacement of 9N304 Crankshaft Assembly order 1--9N305 Crankshaft Assembly and 2--9L7816 Bolts
c205085 UEG0894S
9N0315 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0304 R [1] CRANKSHAFT AS  
    (EACH INCLUDES)
2. 9L-8336 [1] SLEEVE-WEAR  
3. 9N-0286 [1] KEY  
4. 9N-0299 [1] GEAR-CRANKSHAFT (51 TEETH)  
5. 9L-7946 [1]  
6. 9L-7945 C [4]  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0894S0048
 

9N-2133: CRANKSHAFT GP

9N2133 CRANKSHAFT GROUP
c219834 UEG0894S
9N2133 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0304 R [1] CRANKSHAFT ASSEM.  
    (Includes)
2. 9L-8336 [1] SLEEVE  
3. 9N-0286 [1] KEY  
4. 9N-0299 [1] GEAR (51 teeth)  
5. 8N-0731 C [1] BEARING  
6. 8N-0730 C [3] BEARING  
7. 6N-8745 C [1] BEARING  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0894S0049
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
UEG0894S0049 UEG0894S
None CRANKSHAFT BEARING REPLACEMENTS Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

Information:

Truck Engine News
New, One-piece Valve Lifter Used
1981/02/04
High Concentration Of Aluminum In Oil Analysis Can Be The Result Of Rocker Arm Support Wear
1981/03/06
Check Oil Level Carefully To Prevent Operation With Too Much Oil In Engine Crankcase
1981/03/06
Crankshaft Failures; New Thrust Plate
1981/05/12
Larger Valve Springs
1981/05/12
New Spacers Used With Larger Valve Springs
1981/08/18
New Idler Pulley Groups Improve Service Life Of Vee-belt
1981/09/09
Comparison And Applications Of Six And Eight Counterweight Crankshafts
1981/09/23
Bolt Torque Specifications Changed For Crankshaft Pulley And Power Take-off Adapter
1981/11/13
New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve
1982/02/17
New Flywheel Assemblies Used
1982/02/17
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Inspection Marks On Bearings
1982/05/19
List Of Main And Connecting Rod Bearings Currently Available
1982/06/23
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings
1982/06/23
Separate Valve Stem Gauges Available
1982/06/23
Use Correct Torque To Prevent Broken Rocker Arm Shafts
1982/09/01
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
Resurfaced Cylinder Blocks And Heads
1982/12/08
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
Engine Valve Stem "use Again " Specifications
1983/03/02
New Procedure And New Tool Can Be Used To Remove Cylinder Sleeves From The Cylinder Block
1983/08/31
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/12/21
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1983/12/21
FT1886 Valve Spring Compressor Group Available
1984/08/06
New Main And Connecting Rod Bearings Have Copper Bond Material
1984/09/26
Identification Of Camshaft Groups And Valve Mechanism Groups
1984/12/17
New Rear Crankshaft Seal Has Longer Service Life
1985/01/01
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/04/01
Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper
1986/01/01
New 8T2998 Lubricant Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Engine Timing Indicator Group Available
1986/07/01
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
All Three Main Bearing Part Numbers Stamped On Lower Portion Of Standard Size Bearing
1987/06/01
Oil Pan Size Identification
1987/12/01
Die Cast Flywheel Housing Has Less Weight
1988/01/01
New Front Crankshaft Seal Requires New Installer Tool
1989/05/01
New Connecting Rod And Main Bearing Kits Available
1989/10/01
New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters)
1989/12/01
New Flywheel Ring Gear Available To Improve Engagements
1990/04/01
Parts Service Information For Pistons
1990/05/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
Clarify Usage Of Parts Service Cylinder Head Gaskets{1124}
1993/12/01
Engine News
5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods
1979/01/24
Engine Valve Springs Are Now Made Of Carbon Steel Alloy
1979/03/07
New Piston And Connecting Rod Are Tapered In Area Of Piston Pin
1979/03/14
New Engine Cylinder Block Used
1979/03/14
Main Bearings Now Have Larger Diameter Oil Hole For Better Lubrication Of Main And Rod Bearings
1979/03/14
New 6V116 Water Sleeve Removal Tool Is Available
1979/05/23
Engines Can Use Crankshafts With Either Six Or Eight Counterweights
1979/09/19
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges
1980/04/30
New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders
1980/06/04
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Lightening Holes Not Drilled In Some Crankshafts
1977/01/28
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor
1977/03/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Engine Valve Springs Are Now Made Of Stronger Steel
1977/09/07
Check For Extra Holes In Crankshaft Flange If Oil Leaks From Between The Flywheel And Crankshaft Flange
1977/09/07
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/10/12
Excessive Oil Consumption Can Be Caused By Dirt In Air Inlet System Or By Flaking Of The Piston Compression Ring
1977/12/14
Tolerance Added To Valve Clearance Specifications
1978/01/18
Modification Of Oil Pan For Installation Of Oil Sump Heater
1978/03/01
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Chamfer Added To Bolt Hole In Auxiliary Drive Pulley For Water Pump
1978/05/03
New Drive Belt Idler Pulleys Have Larger Bearings
1978/05/24
Procedures And Cautions For Use Of A FLEX-HONE On 3204 And 3208 Engines
1978/06/14
Change In Procedure To Check Main Bearing Clearance
1978/08/30
A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group
1978/12/13
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Magazine
Real Value Available Through Caterpillar Remanufacturing Programs{0374}
1980/02/04
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/21
New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders{1216,1201}
1980/06/02
New, One-Piece Valve Lifter Used{1209}
1981/02/02
High Concentration Of Aluminum In Oil Analysis Can Be The Result Of Rocker Arm Support Wear{1318,1102}
1981/03/02
Check Oil Level Carefully To Prevent Operation With Too Much Oil In Engine Crankcase{1316}
1981/03/02
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Inspect Piston Skirts During Engine Overhaul Procedures{1214,1213}
1981/06/08
Troubleshooting Water In Shut-Off Solenoid Housing{1259}
1981/06/08
Comparison And Applications Of Six And Eight Counterweight Crankshafts{1202,1156}
1981/08/17
New Idler Pulley Groups Improve Service Life Of Vee-Belt{1358}
1981/08/24
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Lubricant Gives Protection To Camshaft And Roller During Initial Start-Up{1210,1209}
1981/09/21
Bolt Torque Specifications Changed For Crankshaft Pulley And Power Take-Off Adapter{1205,1165}
1981/10/05
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Holes Added To Water Pump Impeller{1361}
1982/05/17
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings{1202,1203,1400,1405}
1982/06/21
Use Correct Torque To Prevent Broken Rocker Arm Shafts{1102}
1982/07/05
New Compression Ring Available For Control Of Excessive Oil Consumption{1215}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/10/18
Resurfaced Cylinder BlocksAnd Heads{1201,1101,1000}
1982/10/25
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Piston Design Decreases Oil Consumption{1214,1215}
1982/12/20
Use FT1783 Fixture To Drill Vent Holes In Impeller{0665,1361}
1983/02/28
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
New Shutoff Solenoid Group Used{1259}
1983/03/21
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18
Installation Of Bearing For Connecting Rod Piston Pin{1219}
1983/05/09
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Correct Installation Of New Valve Springs{1108}
1983/11/21
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads{1104}
1983/12/19
Remanufactured Cylinder Head Assemblies{1100,1101}
1984/02/13
New Relief Valve Guide Used In Oil Pump{1315}
1984/07/16
FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0768,1361}
1984/07/16
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
Identification Of Camshaft Groups And Valve Mechanism Groups{1210,1102}
1984/11/26
New Rear Crankshaft Seal Has Longer Service Life{1161}
1985/01/21
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Tachometer Drive Is Now An Attachment{1166,1250,7450,7452,7487}
1985/08/12
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper{1160}
1986/01/13
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Improved Cylinder Head Gasket{1101,1201}
1986/03/24
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Lightening Holes Not Drilled In Some Crankshafts{1202}
1977/01/24
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor{1065}
1977/02/28
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems{1259}
1977/03/07
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Check For Extra Holes In Crankshaft Flange If Oil Leaks From Between The Flywheel And Crankshaft Flange{1156,1202}
1977/09/05
Washer Removed From Variable Timing Unit{1206,1272}
1977/10/03
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/10/17
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Excessive Oil Consumption Can Be Caused By Dirt In Air Inlet System Or By Flaking Of The Piston Compression Ring{1213,1215}
1977/12/12
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
New Plastic Water Sleeve Used{1380}
1987/05/18
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
New Hydraulic Steering Mounting Group Available{4306}
1987/09/21
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Improved Water Pump Group Now Used{1361}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Procedure For Alignment Of Transmission Mounting Parts On 1100 Series And 3208 Truck Engines With Allison MT640, MT650, And AT540 Series Transmissions{3000,1156,1157}
1978/04/03
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
New Drive Belt Idler Pulleys Have Larger Bearings{1358,1359}
1978/05/15
Procedures And Cautions For Use Of A Flex-Hone On 3204 And 3208 Engines{1201}
1978/06/05
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group{1288,7462}
1978/11/20
Die Cast Flywheel Housing Has Less Weight{1157}
1988/01/04
Stepped Compression Ring Temporarily Used{1214,1215}
1988/04/04
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Engine Valve Springs Are Now Made Of Carbon Steel Alloy{1101,1108}
1979/02/19
Main Bearings Now Have Larger Diameter Oil Hole For Better Lubrication Of Main And Rod Bearings{1203,1219,1300}
1979/03/05
New Engine Cylinder Block Used{1201}
1979/03/05
New Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218,1219}
1979/03/05
New Pistons And Timing Advance Unit Give Better Emissions Control And Easier Starts{1214,1272}
1979/04/02
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters){1209,1210}
1989/12/11
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

Caterpillar Parts SIS Catalog 3208 :

COVER GP-CYLINDER BLOCK
9L-6065 COVER GP-CYLINDER BLOCK
9N-1255 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3761 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3551 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3551 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3120 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-0130 CYLINDER BLOCK GP
9N-3750 ENGINE ARRANGEMENT
9N-1250 SHORT BLOCK GP
9N-2139 BLOCK GP-SHORT
9N-5190 BLOCK GP-SHORT
PANEL GP-CYLINDER BLOCK
9L-6560 PANEL GP-CYLINDER BLOCK
CRANKSHAFT GP
9N-0310 CRANKSHAFT GP
CRANKSHAFT GP
9N-2017 CRANKSHAFT GP
CRANKSHAFT GP
9N-0315 CRANKSHAFT GP
CRANKSHAFT GP
9N-2133 CRANKSHAFT GP

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.