AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9N542 CRANKSHAFT SEAL GROUP Serial No. 40S1 to 40S20338 inclusive 3208 TRUCK ENGINE


BASIC ENGINE
CRANKSHAFT GP
FLYWHEEL GP
CAMSHAFT GP
PISTON & ROD GP
CYLINDER HEAD GP

TRUCK ENGINE 3208 TRUCK ENGINE 40S
 3208 TRUCK ENGINE COVERING ENGINE ARRANGEMENTS 9L6082 9L6260 40S00001-UP UEG0894S 3208 40S   (1974)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT GP
9N-0310 CRANKSHAFT GP
CRANKSHAFT GP
9N-2017 CRANKSHAFT GP
CRANKSHAFT GP
9N-0315 CRANKSHAFT GP
CRANKSHAFT GP
9N-2133 CRANKSHAFT GP
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
SEAL GP-CRANKSHAFT
9N-0542 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
9N-0542 SEAL GP-CRANKSHAFT
 

#UEG0894S0050
 

9N-0542: SEAL GP-CRANKSHAFT

9N542 CRANKSHAFT SEAL GROUP
Serial No. 40S1 to 40S20338 inclusive
c149080 UEG0894S
9N0542 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0307 [1] SEAL-LIP TYPE  
2. 9L-7600 C [1] SEAL-CRANKSHAFT  
3. 9L-5968 [1] SHIELD-DUST  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0894S0051
 

9N-0542: SEAL GP-CRANKSHAFT

9N542 CRANKSHAFT SEAL GROUP
Serial No. 40S20339-Up
c158853 UEG0894S
9N0542 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0307 [1] SEAL  
2. 9L-7600 [1] SEAL  
 

#UEG0894S0052
 

9N-0399: FASTENER GP-FLYWHEEL

9N399 CRANKSHAFT COVER GROUP
c205496 UEG0894S
9N0399 FASTENER GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0401 [1] COVER-PROTECTIVE  
2. 9L-7816 C [10] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0894S0053
 

9N-0728: CAMSHAFT GP-SINGLE

9N728 CAMSHAFT GROUP
c204912 UEG0894S
9N0728 CAMSHAFT GP-SINGLE Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9378 [1] PIN  
  5L-5180 [1] WASHER  
2. 9L-7036 [1] CAMSHAFT ASSEM.  
    (Includes)
3. 9L-7032 [1] DOWEL .375 in.(9.5 mm) long  
    -OR-
  5P-4283 C [1] DOWEL .625 in. (15.88 mm) long  
4. 9L-7029 [1] GEAR ASSEM.  
    (Includes)
  9L-7028 [2] DOWEL  
  C   INDICATES CHANGE
 

#UEG0894S0054
 

9N-0150: PISTON & ROD GP

9N150 CONNECTING ROD AND PISTON GROUP--8 Required
Serial No. 40S1 to 40S43905 inclusive
Also part of 9N1250 and 9N2139 Short Block Groups listed on Page 38
c164268 UEG0894S
9N0150 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6979 [1] PISTON GROUP (standard)  
  9N-0579 H [1] PISTON GROUP (.020 in. oversize)  
  9N-0580 H [1] PISTON GROUP (.040 in. oversize)  
2. 9L-9316 [1] RING (standard-oil)  
    (Part of 9L6979 Group)
  9L-9673 [1] RING (.020 in. oversize-oil)  
    (Part of 9N579 Group)
  9L-9323 [1] RING (.040 in. oversize-oil)  
    (Part of 9N580 Group)
3. 9L-6233 [1] RING (standard-compression)  
    (Part of 9L6979 Group)
  9N-0581 C [1] RING (.020 in. oversize)  
    (Part of 9N579 Group)
  9N-0578 [1] RING (.040 in. oversize)  
    (Part of 9N580 Group)
4. 1J-6473 [2] RING  
5. 9N-0407 RC [1] ROD ASSEM.  
    (Includes)
6. 9L-8382 [1] BEARING  
7. 9L-8225 [2] BOLT  
8. 9L-7669 [2] NUT  
9. 9N-0397 [1] BEARING  
  6N-9837 CH BEARING (.010 in. undersize)  
  6N-9838 CH [1] BEARING (.020 in. undersize)  
10. 9L-9889 [1] PIN  
  9N-0875 H [1] PISTON RING GROUP  
    (Includes Complete Set of Rings for One Piston)
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF 9N150 CONNECTING R
 

#UEG0894S0055
 

9N-2613: PISTON & ROD GP

9N2613 CONNECTING ROD AND PISTON GROUP--8 Required
Serial No. 40S43906-Up
Also part of 9N2139 Short Block Group listed on Page 38
c222210 UEG0894S
9N2613 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 C [1] PIN  
2. 1J-6473 [2] RETAINER  
3. 9N-0407 R [1] ROD ASSEM.  
    (Includes)
  8N-0701 C [1] BEARING  
4. 9L-8225 [2] BOLT  
  9L-7669 [2] NUT  
5. 9N-2601 [1] BEARING (standard)  
  6N-9837 H [1] BEARING (.01 in. undersize)  
  6N-9838 H [1] BEARING (.02 in. undersize)  
6. 9L-6979 [1] PISTON GROUP (standard)  
    (Includes)
7. 9L-6233 [1] RING (standard-compression)  
8. 9L-9316 [1] RING (standard-oil)  
9. 9N-0579 H [1] PISTON GROUP (.02 in. oversize)  
    (Includes)
10. 9L-9673 [1] RING (oversize-oil)  
11. 9N-0581 [1] RING (oversize-compression)  
12. 9N-0580 H [1] PISTON GROUP (.04 in. oversize)  
    (Includes)
13. 9L-9323 [1] RING (oversize-oil)  
14. 9N-0578 [1] RING (oversize-compression)  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF CONNECTING ROD & P
 

#UEG0894S0056
 

9N-3538: PISTON & ROD GP

9N3538 CONNECTING ROD AND PISTON GROUP--8 Required--Field Installation
Part of 9N5190 Short Block Group listed on Page 38A
c222630 UEG0894S
9N3538 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 [1] PIN  
2. 1J-6473 [2] RETAINER  
3. 9N-3504 [1] ROD ASSEM.  
    (Includes)
  9N-1354 [1] BEARING  
4. 9L-8225 [2] BOLT  
  9L-7669 [2] NUT  
5. 9N-2601 [1] BEARING (standard)  
  6N-9837 H [1] BEARING (.01 in. undersize)  
  6N-9838 H [1] BEARING (.02 in. undersize)  
  7N-4352 H [1] BEARING (.05 in. undersize)  
6. 9N-3744 J [1] PISTON GROUP (standard)  
    (Includes)
7. 9L-6233 [1] RING (standard-compression)  
8. 9L-9316 [1] RING (standard-oil)  
9. 9N-5445 H [1] PISTON GROUP (.02 in. oversize)  
    (Includes)
10. 9L-9673 [1] RING (oversize-oil)  
11. 9N-0581 [1] RING (oversize-compression)  
12. 9N-5446 H [1] PISTON GROUP (.04 in. oversize)  
    (Includes)
13. 9L-9323 [1] RING (oversize-oil)  
14. 9N-0578 [1] RING (oversize-compression)  
  9N-0875 J [1] RING GROUP  
    (Includes complete set of rings for one piston)
  H   NOT PART OF CONNECTING ROD & P
 

#UEG0894S0057
 

9N-2565: CYLINDER HEAD GROUP

9N2565 CYLINDER HEAD GROUP
c219812 UEG0894S
9N2565 CYLINDER HEAD GROUP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1329 C [8] BOLT 7.62 cm(3 in.) long-Location "E"  
2. 3H-7654 [36] WASHER  
3. 0S-1571 [1] BOLT 4.44 cm(1.75 in.) Location "C"-Left Hand  
  9L-9166 [1] STUDBOLT (3.6 in.) long-Right Head  
4. 9L-9164 [2] GASKET  
5. 5M-6213 [4] PLUG  
6. 5B-9603 [6] BOLT 12.7 cm(5 in.) long-Location "D"  
7. 9L-7683 [8] VALVE (exhaust)  
8. 9N-3111 C [2] HEAD ASSEM.  
    (Each Includes)
  5M-6214 [1] PLUG  
9. 9N-2837 [4] INSERT (exhaust)  
10. 0L-1329 [3] BOLT 7.63 cm(3 in.) long-Location "H"  
11. 8M-5860 [4] PLUG  
12. 9L-7657 [1] PLUG  
13. 7H-3171 C [1] PLUG  
14. 2A-4429 [32] LOCK  
15. 9L-8889 [16] WASHER  
16. 9N-0906 [16] SPACER  
17. 9L-7682 [8] VALVE (intake)  
  2N-8943 H [8] INSERT (intake)  
18. 2B-0947 C [8] BOLT 5.71 cm(2.25 in.)long-Location "G"  
19. 2B-2006 C [12] BOLT 12 cm(4.75 in.) long-Location "F"  
20. 6F-5282 C [8] BOLT 13.3 cm(5.25 in.) long-Location "A"  
21. 5M-6214 [2] PLUG  
22. 9N-3387 C [16] SPRING  
23. 9L-9425 [16] RETAINER  
  C   INDICATES CHANGE
  H   NOT PART OF CYLINDER HEAD GROU
 

#UEG0894S0058
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP
Serial No. 40S1 to 40S1935 inclusive
c168363 UEG0894S
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4850 C [8] BOLT 7.62 cm(3 in.) long-Location "E"  
2. 3H-7654 [36] WASHER  
3. 0S-1571 [1] BOLT 4.44 cm(1.75 in.) long Location "C" - Left Head  
  9L-9166 [1] STUDBOLT 9.14 cm(3.6 in.) long-Right Head  
4. 9L-9164 C [2] GASKET  
5. 5M-6213 [4] PLUG  
6. 5B-9603 [6] BOLT 12.7 cm(5 in.) long-Location "D"  
7. 9L-7683 [8] VALVE (exhaust)  
8. 9L-7627 [2] HEAD ASSEM.  
    (Each Includes)
  9L-7657 [1] PLUG  
9. 9L-7622 [4] INSERT (exhaust)  
10. 0L-1329 [3] BOLT 7.62 cm(3 in.) long-Location "H"  
11. 8M-5860 [4] PLUG  
12. 9L-9190 [16] SPRING  
13. 9L-9425 [16] RETAINER  
14. 2A-4429 [32] LOCK  
15. 9L-8889 [16] WASHER  
16. 9N-0906 [16] SPACER  
17. 9L-7682 C [8] VALVE (Intake)  
  2N-8943 H [8] INSERT (Intake)  
18. 5P-4849 C [8] BOLT 5.71 cm(2.25 in.)long-Location "G"  
19. 5P-4851 C [8] BOLT 12 cm(4.75 in.) long-Location "F"  
20. 5P-4852 C [8] BOLT 13.3 cm(5.25 in.) long-Location "A"  
  C   INDICATES CHANGE
  H   NOT PART OF CYLINDER HEAD GROUP
 

#UEG0894S0059
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP
Serial No. 40S1936 to 40S57731 inclusive
c215680 UEG0894S
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1329 C [8] BOLT 7.62 cm(3 in.) long-Location "E"  
2. 3H-7654 [36] WASHER  
3. 0S-1571 [1] BOLT 4.44 cm(1.75 in.) Location "C" - Left Head  
  9L-9166 [1] STUDBOLT 9.14 cm(3.6 in.) long-Right Head  
4. 9L-9164 [2] GASKET  
5. 5M-6213 C [3] PLUG  
6. 5B-9603 [6] BOLT 12.7 cm(5 in.) long-Location "D"  
7. 9L-7683 [8] VALVE (exhaust)  
8. 9N-3111 C [2] HEAD ASSEM.  
    (Each Includes)
  9L-7657 [1] PLUG  
9. 9N-2837 [4] INSERT (exhaust)  
10. 0L-1329 [3] BOLT 7.62 cm(3 in.) long-Location "H"  
11. 8M-5860 [4] PLUG  
12. 5M-6214 [1] PLUG  
13. 9L-9425 [16] RETAINER  
14. 2A-4429 [32] LOCK  
15. 9L-8889 [16] WASHER  
16. 9N-0906 [16] SPACER  
17. 9L-7682 [8] VALVE (Intake)  
  2N-8943 H [8] INSERT (Intake)  
18. 2B-0947 C [8] BOLT 5.71 cm(2.25 in.)long-Location "G"  
19. 2B-2006 C [12] BOLT 12 cm(4.75 in.) long-Location "F"  
20. 6F-5282 C [8] BOLT 13.3 cm(5.25 in.) long-Location "A"  
21. 9N-3387 C [16] SPRING  
22. 7H-3171 C [1] PLUG  
  C   INDICATES CHANGE
  H   NOT PART OF CYLINDER HEAD GROUP
 

Information:

Truck Engine News
Crankshaft Failures; New Thrust Plate
1981/05/12
Comparison And Applications Of Six And Eight Counterweight Crankshafts
1981/09/23
Bolt Torque Specifications Changed For Crankshaft Pulley And Power Take-off Adapter
1981/11/13
New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve
1982/02/17
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
Inspection Marks On Bearings
1982/05/19
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings
1982/06/23
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
Remanufactured Undersize Crankshafts Are Available
1984/04/04
New Rear Crankshaft Seal Has Longer Service Life
1985/01/01
Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper
1986/01/01
New Front Crankshaft Seal Requires New Installer Tool
1989/05/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
A New Type of Main Bearing is Available {1203}
2004/09/01
Engine News
Engines Can Use Crankshafts With Either Six Or Eight Counterweights
1979/09/19
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Lightening Holes Not Drilled In Some Crankshafts
1977/01/28
Check For Extra Holes In Crankshaft Flange If Oil Leaks From Between The Flywheel And Crankshaft Flange
1977/09/07
Special Instruction
Installation of 0R1210 or 0R1211 Undersize Crankshafts{1202, 1230}
Installation of 0R1210 or 0R1211 Undersize Crankshafts{1202, 1230}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
3208 TRUCK ENGINE
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Main Bearings
3208 TRUCK ENGINE
Crankshaft Pulley
3208 TRUCK ENGINE
Crankshaft Front Seal
3208 TRUCK ENGINE
Crankshaft Rear Seal
3208 TRUCK ENGINE
Crankshaft Rear Seal Wear Sleeve
3208 TRUCK ENGINE
Crankshaft And Gear
3208 TRUCK ENGINE
Service Magazine
Comparison And Applications Of Six And Eight Counterweight Crankshafts{1202,1156}
1981/08/17
Bolt Torque Specifications Changed For Crankshaft Pulley And Power Take-Off Adapter{1205,1165}
1981/10/05
New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/01/25
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings{1202,1203,1400,1405}
1982/06/21
New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/10/18
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
New Rear Crankshaft Seal Has Longer Service Life{1161}
1985/01/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper{1160}
1986/01/13
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Lightening Holes Not Drilled In Some Crankshafts{1202}
1977/01/24
Check For Extra Holes In Crankshaft Flange If Oil Leaks From Between The Flywheel And Crankshaft Flange{1156,1202}
1977/09/05
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/10/17
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
All Three Main Bearing Part Numbers Stamped On Lower Portion Of Standard Size Bearing {1203}
1987/06/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Main Bearings Now Have Larger Diameter Oil Hole For Better Lubrication Of Main And Rod Bearings{1203,1219,1300}
1979/03/05
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Engines Can Use Crankshafts With Either Six Or Eight Counterweights {1202}
1979/09/10
New Front Crankshaft Seal Requires New Installer Tool {1160,1202,0704}
1989/05/22
New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 3208 :

CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT GP
9N-2133 CRANKSHAFT GP
CRANKSHAFT GP
9N-0315 CRANKSHAFT GP
CRANKSHAFT GP
9N-2017 CRANKSHAFT GP
CRANKSHAFT GP
9N-0310 CRANKSHAFT GP
PANEL GP-CYLINDER BLOCK
9L-6560 PANEL GP-CYLINDER BLOCK
9N-5190 BLOCK GP-SHORT
9N-2139 BLOCK GP-SHORT
SEAL GP-CRANKSHAFT
9N-0542 SEAL GP-CRANKSHAFT
FASTENER GP-FLYWHEEL
9N-0399 FASTENER GP-FLYWHEEL
CAMSHAFT GP-SINGLE
9N-0728 CAMSHAFT GP-SINGLE
PISTON & ROD GP
9N-0150 PISTON & ROD GP
PISTON & ROD GP
9N-2613 PISTON & ROD GP
PISTON & ROD GP
9N-3538 PISTON & ROD GP
CYLINDER HEAD GROUP
9N-2565 CYLINDER HEAD GROUP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.