AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N7613 GOVERNOR AND FUEL INJECTION PUMP GROUP Part of 6N7607 Governor & Fuel Injection Pump Group listed on Page 118-6 6N509 Control & 4N9754 Governor & Fuel Injection Pump parts are shown on Pages 119 & 122 through 125 3306


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
GOVERNOR GP
TORQUE CONTROL GP
GOVERNOR GP

INDUSTRIAL ENGINE 3306 INDUSTRIAL ENGINE 66D
 3306 INDUSTRIAL ENGINE 66D12370-26831 UEG0895S 3306 66D   (1972)

FUEL SYSTEM

GOVERNOR GP
6N-7607 GOV & FUEL INJ PUMP GP
6N-7606 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-7613 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-7614 GOV & FUEL INJ PUMP GP
GOVERNOR SPRINGS
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0310 GOVERNOR AND FUEL INJECTION PUMP GROUP
 

#UEG0895S0400
 

6N-7613: GOV & FUEL INJ PUMP GP

6N7613 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 6N7607 Governor & Fuel Injection Pump Group listed on Page 118-6
6N509 Control & 4N9754 Governor & Fuel Injection Pump parts are shown on Pages 119 & 122 through 125
c160815 UEG0895S
6N7613 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-4710 [2] BOLT  
2. 4N-0053 [1] COVER  
  4N-0159 [1] GASKET  
3. 0S-1616 [1] BOLT  
4. 6N-2843 [1] GASKET  
5. 4N-5490 [1] BASE ASSEM.  
    (Includes)
6. 9S-4167 [1] STUD  
7. 9S-8597 [1] SPRING  
8. 6N-0509 Y [1] CONTROL GROUP  
9. 4N-9754 Y [1] PUMP GROUP  
    (Separate Illustration)
10. 9F-7022 [1] BOLT  
11. 4N-9336 [1] DISC  
12. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
13. 0S-1615 [13] BOLT  
14. 9F-6580 [2] BOLT  
15. 8S-4710 [1] BOLT  
16. 6D-0238 [1] VALVE ASSEM.  
17. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
18. 4N-4431 [1] GASKET  
  6N-2810 [1] CHANNEL  
19. 4N-4351 [1] COVER  
  4N-9057 [1] GASKET  
20. 4N-0443 [1] PIN  
21. 6N-8157 [1] SPRING  
22. 6N-0248 [1] SHAFT ASSEM.  
23. 4N-0444 [2] SPACER  
24. 4N-8179 [1] PIN  
25. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#UEG0895S0401
 

6N-7614: GOV & FUEL INJ PUMP GP

6N7614 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 6N7606 Governor & Fuel Injection Pump Group listed on Page 118-7
6N509 Control & 6N5355 Governor & Fuel Injection Pump parts are shown on Pages 119 & 127G through 127K
c230352 UEG0895S
6N7614 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-4710 [ 2] BOLT  
2. 4N-0053 [ 1] COVER  
  4N-0159 [ 1] GASKET  
3. 0S-1616 [ 1] BOLT  
4. 6N-2843 [ 1] GASKET  
5. 4N-5490 [ 1] BASE ASSEM.  
    (Includes)
6. 9S-4167 [ 1] STUD  
7. 9S-8597 [ 1] SPRING  
8. 6N-0509 Y [ 1] CONTROL GROUP  
9. 6N-5355 Y [ 1] PUMP GROUP  
10. 9F-7022 [ 1] BOLT  
11. 4N-9336 [ 1] DISC  
12. 4N-7572 [ 1] ELBOW  
  4N-9337 [ 1] GASKET  
13. 0S-1615 [ 13] BOLT  
14. 9F-6580 [ 2] BOLT  
15. 8S-4710 [ 1] BOLT  
16. 7N-0450 C [ 1] VALVE ASSEM.  
17. 9S-4180 [ 1] PLUG  
  4J-7533 [ 1] SEAL  
18. 4N-4431 [ 1] GASKET  
  6N-2810 [ 1] CHANNEL  
19. 4N-4351 [ 1] COVER  
  4N-9057 [ 1] GASKET  
20. 4N-0443 [ 1] PIN  
21. 6N-5170 C [ 1] SPRING  
22. 6N-0248 [ 1] SHAFT ASSEM.  
23. 4N-0444 [ 2] SPACER  
24. 4N-8179 [ 1] PIN  
25. 9S-4191 [ 1] PLUG  
  3J-1907 [ 1] SEAL  
26. 4N-5050 [ 2] PLUG  
    SEPARATE ILLUSTRATION
    INDICATES CHANGE
 

#UEG0895S0402
 

GOVERNOR SPRINGS

GOVERNOR SPRINGS
UEG0895S0402 UEG0895S
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4N-4222 GOVERNOR SPRING--5% REGULATION AT 2000 R.P.M.  
  6N-7814 GOVERNOR SPRING--5% REGULATION AT 1800 R.P.M.  
  6N-7815 GOVERNOR SPRING--5% REGULATION AT 1500 R.P.M.  
 

#UEG0895S0403
 

7N-0576: TORQUE CONTROL GP

7N576 TORQUE CONTROL GROUP
Serial No. 66D18793-Up
Part of 7N578 Governor & Fuel Injection Pump Group
shown on Page 118-3
c162050 UEG0895S
7N0576 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-6458 [1] NUT  
2. 4L-7124 [1] BOLT  
3. 4N-3882 [1] CONTACT  
4. 8M-9064 [1] SHIM 1.63 mm(.064 in.) thick  
5. 1P-6452 [2] INSULATOR  
6. 4N-7777 [2] SPACER .254 mm(.010 in.) thick  
7. 9L-7235 [3] SHIM .99 mm(.039 in.) thick  
8. 4N-9098 [1] SPACER 5.08 mm(.20 in.) thick  
9. 1P-6453 [1] BAR 6.35 mm(.25 in.) thick  
10. 9L-3625 [1] SPRING .56 mm(.022 in.) thick  
11. 8L-8601 [6] SPACER .051 mm(.002 in.) thick  
12. 9L-3626 [1] SPACER .41 mm(.016 in.) thick  
13. 9L-9347 [1] SHIM .51 mm(.020 in.) thick  
 

#UEG0895S0404
 

6N-3730: TORQUE CONTROL GP

6N3730 TORQUE CONTROL GROUP
AN ATTACHMENT
c152565 UEG0895S
6N3730 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-6458 [1] NUT  
2. 4L-7124 [1] BOLT  
3. 4N-3882 [1] CONTACT  
4. 8M-9064 [1] SHIM .064 in.(1.63 mm) thick  
5. 1P-6452 [2] INSULATOR  
6. 9L-7235 [3] SHIM .039 in.(1 mm) thick  
7. 4N-7777 [3] SPACER .010 in.(0.26 mm) thick  
8. 4N-9098 [1] SPACER .500 in.(12.70 mm) thick  
9. 1P-6453 [1] BAR  
10. 9S-9662 [1] SPRING .018 in.(0.46 mm) thick  
11. 8L-8601 [6] SPACER .002 in.(0.06 mm) thick  
12. 9L-9347 [1] SHIM .020 in.(0.51 mm) thick  
 

#UEG0895S0405
 

6N-0581: TORQUE CONTROL GP

6N581 TORQUE CONTROL GROUP
Serial No. 66D16503-Up. Part of 9N1292 Governor and Fuel Injection Pump Group shown
on Page 117A
c201372 UEG0895S
6N0581 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-6458 [1] NUT-FULL  
2. 4L-7124 [1] BOLT  
3. 8M-9064 [1] SHIM-SPRING (.064IN THK)  
4. 1P-6452 [2] INSULATOR  
5. 4N-3882 [1] CONTACT-STOP  
6. 9L-7235 [3] SHIM-TORQUE SPRING (.039IN THK)  
7. 4N-7777 [3] SPACER (.010IN THK)  
8. 4N-9098 [1] SPACER (.200IN THK)  
9. 1P-6453 [1] BAR-LOAD STOP  
10. 9L-5176 [1] SPRING-TORQUE  
11. 8L-8601 [6] SPACER  
12. 9L-9347 [1] SHIM-TORQUE SPRING  
 

#UEG0895S0406
 

6N-0454: TORQUE CONTROL GP

6N454 TORQUE CONTROL GROUP
Part of 9N1292, 7N5304 & 7N5947 Governor & Fuel Injection Pump Groups shown on
Pages 117A, 117B & 117D
c201644 UEG0895S
6N0454 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-6458 [1] NUT-FULL  
2. 4L-7124 [1] BOLT  
3. 8M-9064 [1] SHIM-SPRING 1.63MM(.064 IN)THK  
4. 1P-6452 [2] INSULATOR  
5. 4N-3882 [1] CONTACT-STOP  
6. 9L-7235 [3] SHIM-TORQUE SPRING 1.01MM(.039 IN)THK  
7. 4N-7777 [2] SPACER .26MM(.010 IN)THK  
8. 4N-9098 [1] SPACER 12.7MM(.500 IN)THK  
9. 1P-6453 [1] BAR-LOAD STOP  
10. 9L-6483 [1] SPRING-TORQUE .51MM(.020 IN)THK  
11. 8L-8601 [6] SPACER .06MM(.002 IN)THK  
12. 9L-9347 [2] SHIM-TORQUE SPRING .51MM(.020 IN)THK  
 

#UEG0895S0407
 

6N-0310: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N310 GOVERNOR AND FUEL INJECTION PUMP GROUP
6N509 Torque Control & 6N270 Governor & Fuel Injection Pump
parts are shown on Pages 119, 126 & 127
c204122 UEG0895S
6N0310 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0509 Y [1] TORQUE CONTROL GROUP  
    (Separate Illustration)
2. 6N-0270 Y [1] FUEL INJECTION PUMP GROUP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4225 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#UEG0895S0408
 

6N-0509: TORQUE CONTROL GP

6N509 TORQUE CONTROL GROUP
Part of 6N3688, 6N314, 6N2829, 6N313, 6N6214, 7N22, 6N7613, 6N7614
& 6N310 Governor & Fuel Injection Pump Groups shown on Pages 116A,
116B, 117, 118-1, 118-2, 118-8, 118-9 & 119
c201366 UEG0895S
6N0509 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [2] INSULATOR  
2. 8M-9064 [1] SHIM-SPRING  
3. 4L-7124 [1] BOLT  
4. 4N-3882 [1] CONTACT-STOP  
5. 4N-3881 [1] SCREW  
6. 9M-1311 [1] NUT-JAM  
7. 4N-3884 [1] WASHER-SPRING  
8. 4N-3883 [1] BAR-LOAD STOP  
9. 4L-6458 [1] NUT-FULL  
 

#UEG0895S0409
 

6N-0271: GOV & FUEL INJ PUMP GP

6N271 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 2--Type 1
Part of 6N314, 6N2829, 6N2828, 6N313 & 7N22 Governor & Fuel Injection Pump Groups shown on Pages 117, 118 & 118-2
4N9754 Governor & Fuel Injection Pump parts are shown on Pages 122 through 125
c213170 UEG0895S
6N0271 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2831 [1] ADAPTER ASSEM.  
    (Includes)
2. 3N-2813 [1] SEAL  
3. 4N-9467 [2] BEARING  
4. 3N-2820 [1] LEVER ASSEM.  
    (Includes)
5. 7L-4993 [1] DOWEL  
6. 3N-2822 [1] LEVER  
7. 9F-1707 [1] BOLT  
8. 3N-2832 [1] GASKET  
9. 2A-0762 [2] BOLT  
10. 4N-9754 Y [1] FUEL INJECTION PUMP GROUP  
    (Separate Illustration)
11. 4N-5490 [1] BASE ASSEM.  
    (Includes)
12. 9S-4167 [1] STUD  
13. 9F-6580 [2] BOLT  
14. 0S-1615 [13] BOLT  
15. 4N-9336 [1] DISC  
16. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
17. 8S-4710 [1] BOLT  
18. 6D-0238 [1] VALVE ASSEM.  
19. 9F-7022 [1] BOLT  
20. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
21. 4N-4431 [1] GASKET  
  6N-2810 [1] CHANNEL  
22. 4N-4351 [1] COVER  
  4N-9057 [1] GASKET  
23. 6N-0242 [1] COVER  
24. 2N-2658 [1] BOLT  
25. 3N-2824 [1] LEVER ASSEM.  
26. 4N-0403 [1] GASKET  
27. 3N-2815 [1] SHAFT  
28. 6N-2843 [1] GASKET  
29. 9L-5914 [1] WASHER  
30. 6N-0248 [1] SHAFT ASSEM.  
31. 4N-0159 [1] GASKET  
32. 3N-2826 [1] BASE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet
1979/08/22
Improvements Made To Fuel Injection Pump And Governor Group
1979/11/28
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals
1981/09/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Seal Used On Governor Control Shaft
1982/12/15
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Fuel Transfer Pump Improved
1985/11/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Equipment
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (4N4864)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (7L543 and 2N8603)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governors
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Output Shaft Governor<BR> (8L8661)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Equipment
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Adjustable &quot;Dashpot&quot;<BR> (Close Regulation Type Governor)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel System Timing<BR> (Engines With Timing Pointer)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance Unit
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor<BR> (8N6774)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor Control
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Letter-China
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Transfer Pump
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Adapter Housing And Levers
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Check Valve And Bypass Valve
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
If The Fuel Setting Dimension Is More Than 7.00 MM, Remove The End Play Of The Camshaft To Make The Fuel Setting{1257,1286}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Tachometer Drive Adapter Has Increased Service Life{7462,1288}
1979/01/22
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog 3306 :

6N-7606 GOV & FUEL INJ PUMP GP
6N-7607 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-6270 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-6270 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-6270 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-6270 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
7N-0578 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
7N-0022 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOV & FUEL INJ PUMP GP
6N-7614 GOV & FUEL INJ PUMP GP
GOVERNOR SPRINGS
TORQUE CONTROL GP
7N-0576 TORQUE CONTROL GP
TORQUE CONTROL GP
6N-3730 TORQUE CONTROL GP
TORQUE CONTROL GP
6N-0581 TORQUE CONTROL GP
TORQUE CONTROL GP
6N-0454 TORQUE CONTROL GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0310 GOVERNOR AND FUEL INJECTION PUMP GROUP
TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.