AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3N8263 WIRING HARNESS ASSEMBLY--Part 2 of 2--Type 4 FOR USE WITH STAND-BY GENERATOR SET Refer to Chart shown on Page 162A for usage 3306


ELECTRICAL AND STARTING SYSTEM
WIRING GP
ENGINE ARRANGEMENT
CONVERSION GP-ENGINE
ELECTRICAL AND STARTING SYSTEM
WIRING GP
GLOW PLUG GP

INDUSTRIAL ENGINE 3306 INDUSTRIAL ENGINE 66D
 3306 INDUSTRIAL ENGINE 66D12370-26831 UEG0895S 3306 66D   (1972)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
3L-6655 WIRING GP
8L-4849 WIRING GP
HARNESS AS
3N-8263 HARNESS AS
HARNESS AS
3N-8263 HARNESS AS
HARNESS AS
3N-8263 HARNESS AS
HARNESS AS
3N-8263 HARNESS AS
HARNESS AS
3N-8263 HARNESS AS
WIRING HARNESS ASSEMBLY
3N-5486 WIRING HARNESS ASSEMBLY
1N-8509 WIRING GP-SYSTEM
2L-9808 WIRING GP
 

#UEG0895S0630
 

3N-8263: HARNESS AS

3N8263 WIRING HARNESS ASSEMBLY--Part 2 of 2--Type 4
FOR USE WITH STAND-BY GENERATOR SET
Refer to Chart shown on Page 162A for usage
c218055 UEG0895S
3N8263 HARNESS AS Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8413 [90] STRAP (use as required)  
2. [2] TERMINAL  
3. 5P-1477 [4] TERMINAL  
4. 2L-8057 [1] TERMINAL  
5. 8S-4626 C [2] SPLICE  
6. 5P-1476 [1] TERMINAL  
7. 2L-8071 [3] TERMINAL  
8. 5P-1475 [10] TERMINAL  
9. 2L-8061 [1] TERMINAL  
    THE FOLLOWING WIRES ARE AVAILABLE:
  5P-5622 CD WIRE (10 gauge)  
  5P-5624 CD WIRE (14 gauge)  
  5P-5689 CD WIRE (8 gauge)  
  C   INDICATES CHANGE
  D   ORDER BY THE METRE
 

#UEG0895S0631
 

3N-8262: CONVERSION AR-ENGINE

3N8262 WIRING HARNESS ASSEMBLY--Part 1 of 2--Type 5
FOR USE WITH STAND-BY GENERATOR SET
Refer to Chart shown on Page 162A for usage
c237056 UEG0895S
3N8262 CONVERSION AR-ENGINE Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-8076 [2] TERMINAL  
2. 2L-8075 [14] TERMINAL  
3. 2L-8057 [2] TERMINAL  
4. 5N-7501 C [1] CONNECTOR  
5. 5P-1475 [12] TERMINAL  
6. 5P-1476 [1] TERMINAL  
7. 5N-7502 C [1] FERRULE  
8. 5N-7504 CJ CONDUIT 44 cm(17.32 in.)  
9. 2L-8065 [2] TERMINAL  
10. 5P-1477 [1] TERMINAL  
  4L-2791 CFB [1] MARKER (card of)  
  C   INDICATES CHANGE
  J   ORDER BY THE CENTIMETRE
  F   NOT SHOWN
  B   USE AS REQUIRED
 

#UEG0895S0632
 

3N-8262: CONVERSION AR-ENGINE

3N8263 WIRING HARNESS ASSEMBLY--Part 2 of 2--Type 5
FOR USE WITH STAND-BY GENERATOR SET
Refer to Chart shown on Page 162A for usage
c237057 UEG0895S
3N8262 CONVERSION AR-ENGINE Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8413 B [90] STRAP (use as required)  
2. [2] TERMINAL  
3. 5P-1477 [4] TERMINAL  
4. 2L-8057 [1] TERMINAL  
5. 8S-4626 [2] SPLICE  
6. 5P-1476 [1] TERMINAL  
7. 2L-8071 [3] TERMINAL  
8. 5P-1475 [10] TERMINAL  
9. 2L-8061 [1] TERMINAL  
    THE FOLLOWING WIRES ARE AVAILABLE:
  5P-5622 H WIRE (10 gauge)  
  5P-5624 H WIRE (14 gauge)  
  5P-5689 H WIRE (8 gauge)  
  H   ORDER BY THE METRE
  B   USE AS REQUIRED
 

#UEG0895S0633
 

3N-5486: WIRING HARNESS ASSEMBLY

3N5486 WIRING HARNESS ASSEMBLY
Part of 3N7791 Automatic Electric Start-Stop Arrangement listed on Page 162
c151005 UEG0895S
3N5486 WIRING HARNESS ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1475 [17] TERMINAL  
2. 5P-1477 [7] TERMINAL  
3. 2L-8075 [3] TERMINAL  
4. 9M-4492 [1] CONNECTOR  
5. 5P-0696 CJ CONDUIT 17 in.  
6. 2L-8919 [2] DISCONNECT  
7. 2L-8071 [3] TERMINAL  
8. 2L-8068 [2] TERMINAL  
9. 5P-1476 [2] TERMINAL  
10. 032-9798 [2] TERMINAL  
11. 9M-4493 [1] CONNECTOR  
12. 8L-8413 [90] STRAP  
    THE FOLLOWING WIRES ARE AVAILABLE:
  5P-0497 H WIRE (14 gauge)  
  5P-0616 WIRE (10 gauge)  
  C   INDICATES CHANGE
  J   ORDER BY THE CENTIMETRE
  H   ORDER BY THE DECIMETRE
 

#UEG0895S0634
 

3N-3892: GLOW PLUG GP

3N3892 DUMMY PLUG GROUP
c203033 UEG0895S
3N3892 GLOW PLUG GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4122 C [2] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0895S0635
 

9L-4243: PLUG GP-GLOW

9L4243 GLOW PLUG AND WIRING GROUP--12 Volt
Serial No. 66D12370 to 66D14880 inclusive
c204485 UEG0895S
9L4243 PLUG GP-GLOW Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-6613 [1] WIRE ASSEM.  
    (Includes)
  5P-0683 CH WIRE (12 gauge) 16.03 DM(64. 12 IN.)  
2. 2R-1033 [1] WASHER  
3. 3M-6018 [1] TERMINAL  
4. 7L-6614 [1] SHELL  
5. 5S-8479 [1] LEAD ASSEM.  
6. 1P-7912 [6] GLOW PLUG  
7. 2H-3755 [3] BOLT  
  9M-1974 C [3] WASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE DECIMETRE
 

#UEG0895S0636
 

9L-4243: PLUG GP-GLOW

9L4243 GLOW PLUG GROUP--12 Volt
Serial No. 66D14881-Up
c155732 UEG0895S
9L4243 PLUG GP-GLOW Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-6613 [1] WIRE AS  
  5P-0683 CD WIRE-12 GAUGE  
2. 2R-1033 [1] WASHER  
3. 3M-6018 [1] TERMINAL  
4. 7L-6614 [1] SHELL  
5. 2P-8888 C [1] LEAD AS-PLUG  
6. 9N-0194 C [6] PLUG-GLOW  
7. 2H-3755 [3] BOLT  
  9M-1974 [3] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#UEG0895S0637
 

6N-0981: PLUG GP-GLOW

6N981 GLOW PLUG GROUP--12 Volt--3 Required
AN ATTACHMENT
c203020 UEG0895S
6N0981 PLUG GP-GLOW Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0194 [2] GLOW PLUG  
 

#UEG0895S0638
 

6N-1058: PLUG GP-GLOW

6N1058 GLOW PLUG GROUP--24 Volt--3 Required
AN ATTACHMENT
c203021 UEG0895S
6N1058 PLUG GP-GLOW Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0360 [2] GLOW PLUG  
 

#UEG0895S0639
 

6N-1059: PLUG GP-GLOW

6N1059 GLOW PLUG GROUP--32 Volt--3 Required
AN ATTACHMENT
c203011 UEG0895S
6N1059 PLUG GP-GLOW Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4841 [2] PLUG  
 

Information:

Engine News
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up
1986/08/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
1041820 Wiring Kit Available To Prevent High Coolant Temperature Alarm After Engine Shutdown.
1993/03/01
Wiring Harness Conduit Component Sizes {1408}
1995/02/01
New Glow Plug Wiring Harness Prevents Short Circuit
1978/08/16
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/11/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
BRIDGE RECTIFIER TEST
BRIDGE RECTIFIER TEST
A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412}
A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Testing and Adjusting
Electrical Connector - Inspect
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Connector Contact Identification of Generator Set Control
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Schematics and Wiring Diagrams
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Reading DC Schematics
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up {4450}
1986/07/28
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10
1041820 Wiring Kit Available To Prevent High Coolant Temperature Alarm After Engine Shutdown.{7417}
1993/03/22
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 3306 :

HARNESS AS
3N-8263 HARNESS AS
HARNESS AS
3N-8263 HARNESS AS
HARNESS AS
3N-8263 HARNESS AS
HARNESS AS
3N-8263 HARNESS AS
JUNCTION BOX GP
8L-4960 JUNCTION BOX GP
INSTRUMENT PANEL AS
3N-6354 INSTRUMENT PANEL AS
JUNCTION BOX GP
8L-4960 JUNCTION BOX GP
INSTRUMENT PANEL AS
3N-6354 INSTRUMENT PANEL AS
CONVERSION AR-ENGINE
3N-8262 CONVERSION AR-ENGINE
CONVERSION AR-ENGINE
3N-8262 CONVERSION AR-ENGINE
WIRING HARNESS ASSEMBLY
3N-5486 WIRING HARNESS ASSEMBLY
GLOW PLUG GP
3N-3892 GLOW PLUG GP
PLUG GP-GLOW
9L-4243 PLUG GP-GLOW
PLUG GP-GLOW
9L-4243 PLUG GP-GLOW
PLUG GP-GLOW
6N-0981 PLUG GP-GLOW
PLUG GP-GLOW
6N-1058 PLUG GP-GLOW

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.