AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N6213 GOVERNOR AND FUEL INJECTION PUMP GROUP Serial No. 23C951-Up NOTE: REFER TO ATTACHMENT GOVERNOR SPRINGS. 6N6269 Pump & 6N509 Torque Control parts are shown on Pages 72F, 73 & 78 3306


FUEL SYSTEM
GOVERNOR GP

INDUSTRIAL ENGINE 3306 INDUSTRIAL ENGINE 23C
 3306 INDUSTRIAL ENGINE 23C00842-01265 UEG0896S 3306 23C   (1968)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0309 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOV & FUEL INJ PUMP GP
6N-6213 GOV & FUEL INJ PUMP GP
GOVERNOR SPRINGS
6N-6901 CONVERSION GP-GOVERNOR
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0273 GOVERNOR AND FUEL INJECTION PUMP GROUP
 

#UEG0896S0150
 

6N-6213: GOV & FUEL INJ PUMP GP

6N6213 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 23C951-Up
NOTE: REFER TO ATTACHMENT GOVERNOR SPRINGS. 6N6269 Pump & 6N509
Torque Control parts are shown on Pages 72F, 73 & 78
c158694 UEG0896S
6N6213 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0509 Y [1] TORQUE CONTROL GROUP  
    (Separate Illustration)
2. 6N-6269 Y [1] FUEL INJECTION PUMP GROUP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4227 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#UEG0896S0151
 

GOVERNOR SPRINGS

GOVERNOR SPRINGS
Serial No. 23C951-Up
AN ATTACHMENT
UEG0896S0151 UEG0896S
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4N-4222 GOVERNOR SPRING--5% REGULATION AT 1800 R.P.M.  
  4N-4224 GOVERNOR SPRING--5% REGULATION AT 2000 R.P.M.  
  6N-7815 GOVERNOR SPRING--5% REGULATION AT 1500 R.P.M.  
 

#UEG0896S0152
 

6N-6901: CONVERSION GP-GOVERNOR

6N6901 CLOSE REGULATION GOVERNOR CONVERSION GROUP
Serial No. 23C842 to 23C950 inclusive
INLINE SMFS. FIELD INSTALLATION
UEG0896S0152 UEG0896S
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4N-6547 [1] HOUSING ASSEMBLY ADJUSTABLE ORIFICE GOVERNOR  
  5M-6214 [1] PLUG  
  4N-0260 [2] SEAL  
  4N-2333 [1] DOWEL  
  4N-2786 [1] SEAL  
  8S-6814 [2] DOWEL  
  6N-2578 [1] BEARING  
  9S-4180 [1] PLUG  
  6N-4655 [1] DASHPOT ASSEMBLY  
  4N-0594 [1] GASKET GOVERNOR HOUSING TO FUEL PUMP HOUSING  
  4N-5485 [1] BODY VALVE  
  4N-5484 [1] VALVE NEEDLE  
  6H-9691 [1] SEAL VALVE TO BODY  
  5F-9144 [1] SEAL BODY TO GOVERNOR HOUSING  
  4N-5524 [3] WEIGHTS GOVERNOR  
  4N-1723 [1] SHIELD WEIGHT CARRIER  
  4N-2955 [3] BOLT WEIGHT CARRIER TO CAMSHAFT  
  3H-0442 [1] SEAL RISER LEVER SHAFT  
  4N-0049 [1] GASKET IDLE ADJUSTMENT COVER  
  4N-0508 [1] GASKET TORQUE SPRING COVER  
  4N-0159 [1] GASKET ADAPTER TO GOVERNOR HOUSING  
  6L-5773 [1] GASKET SMOKE LIMITER TO SHUT-OFF HOUSING  
  4N-0117 [2] GASKET SOLENOID TO SHUT-OFF HOUSING  
  4N-4221 [1] SPRING (2) PINK STRIPES  
  4N-4223 [1] SPRING (2) YELLOW STRIPES  
  4N-4224 [1] SPRING (2) YELLOW AND (1) WHITE STRIPE  
  4N-0402 [1] GASKET THROTTLE COVER  
  6N-6597 [1] GASKET SHUT-OFF HOUSING TO ADAPTER  
  6N-8158 [1] SPRING (3) GREEN AND (1) YELLOW STRIPE  
  6N-8157 [1] SPRING (3) PINK AND (1) WHITE STRIPE  
  4N-9191 [1] SPRING (2) WHITE AND (1) PINK STRIPE  
  4N-9192 [1] SPRING (2) PINK AND (1) WHITE STRIPE  
 

#UEG0896S0153
 

6N-0273: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N273 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 2--Type 1
Serial No. 23C842 to 23C950 inclusive
Part of 6N309 Governor and Fuel Injection Pump Group shown on Page 71
4N1836 Governor and Fuel Injection Pump parts are shown on Pages 74 through 77-4
c204338 UEG0896S
6N0273 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2831 [1] ADAPTER ASSEM.  
    (Includes)
2. 3N-2813 [1] SEAL  
3. 4N-9467 [2] BEARING  
4. 3N-2820 [1] LEVER ASSEM.  
    (Includes)
5. 7L-4993 [1] DOWEL  
6. 3N-2822 [1] LEVER  
7. 9F-1707 [1] BOLT  
8. 3N-2832 [1] GASKET  
9. 2A-0762 [2] BOLT  
10. 4N-1836 RY [1] FUEL INJECTION PUMP GROUP  
    (Separate Illustration)
11. 4N-5490 [1] BASE ASSEM.  
    (Includes)
12. 9S-4167 [1] STUD  
13. 9F-6580 [2] BOLT  
14. 0S-1615 [13] BOLT  
15. 4N-9336 [1] DISC  
16. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
17. 8S-4710 [1] BOLT  
18. 6D-0238 [1] VALVE ASSEM.  
19. 9F-7022 [1] BOLT  
20. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
21. 4N-4431 [1] GASKET  
  6N-2810 [1] CHANNEL  
22. 4N-4351 [1] COVER  
  4N-9057 [1] GASKET  
23. 6N-0242 [1] COVER  
24. 6N-2843 [1] GASKET  
25. 3N-2815 [1] SHAFT  
26. 4N-0403 [1] GASKET  
27. 3N-2824 [1] LEVER ASSEM.  
28. 2N-2658 [1] BOLT  
29. 9L-5914 [1] WASHER  
30. 6N-0248 [1] SHAFT ASSEM.  
31. 4N-0159 [1] GASKET  
32. 3N-2826 [1] BASE  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#UEG0896S0154
 

6N-0273: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N273 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 2--Type 1
Serial No. 23C842 to 23C950 inclusive
Part of 6N309 Governor and Fuel Injection Pump Group shown on Page 71
c204339 UEG0896S
6N0273 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-0762 [6] BOLT  
2. 3L-5987 [1] COVER  
3. 6L-5773 [1] GASKET  
4. 4N-0444 [2] SPACER  
5. 2P-0726 [1] SPRING  
6. 4N-8179 [1] PIN  
7. 4L-3776 [1] BOLT  
8. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL  
9. 4N-5658 [1] PLUG  
10. 5M-6214 [1] PLUG  
11. 4N-0610 [1] DIAPHRAGM  
12. 4F-7957 [2] BOLT  
13. 4N-0609 [1] COVER  
14. 4N-8507 [2] COVER  
15. 4N-0117 [2] GASKET  
16. 8F-6302 [1] BOLT  
17. 0S-1615 [3] BOLT  
 

#UEG0896S0155
 

6N-0273: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N273 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 2--Type 2
Serial No. 23C842 to 23C950 inclusive
Part of 6N309 Governor and Fuel Injection Pump Group shown on Page 71
4N1836 Governor & Fuel Injection Pump parts are shown on Pages 74 through 77-4
c156284 UEG0896S
6N0273 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2831 [1] ADAPTER ASSEM.  
    (Includes)
2. 3N-2813 [1] SEAL  
3. 4N-9467 [2] BEARING  
4. 3N-2820 [1] LEVER ASSEM.  
    (Includes)
5. 7L-4993 [1] DOWEL  
6. 3N-2822 [1] LEVER  
7. 9F-1707 [1] BOLT  
8. 3N-2832 [1] GASKET  
9. 2A-0762 [2] BOLT  
10. 4N-1836 RY [1] FUEL INJECTION PUMP GROUP  
    (Separate Illustration)
11. 4N-5490 [1] BASE ASSEM.  
    (Includes)
12. 9S-4167 [1] STUD  
13. 9F-6580 [2] BOLT  
14. 0S-1615 [13] BOLT  
15. 4N-9336 [1] DISC  
16. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
17. 8S-4710 [1] BOLT  
18. 6D-0238 [1] VALVE ASSEM.  
19. 9F-7022 [1] BOLT  
20. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
21. 4N-4431 [1] GASKET  
  6N-2810 [1] CHANNEL  
22. 4N-4351 [1] COVER  
  4N-9057 [1] GASKET  
23. 6N-0242 [1] COVER  
24. 6N-2843 [1] GASKET  
25. 3N-2815 [1] SHAFT  
26. 4N-0403 [1] GASKET  
27. 3N-2824 [1] LEVER ASSEM.  
28. 2N-2658 [1] BOLT  
29. 6N-2956 [1] WASHER  
30. 6N-0248 [1] SHAFT ASSEM.  
31. 4N-0159 [1] GASKET  
32. 3N-2826 [1] BASE  
33. 6N-2957 C [2] WASHER  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0896S0156
 

6N-0273: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N273 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 2--Type 2
Serial No. 23C842 to 23C950 inclusive
Part of 6N309 Governor and Fuel Injection Pump Group shown on Page 71
c204339 UEG0896S
6N0273 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-0762 [6] BOLT  
2. 3L-5987 [1] COVER  
3. 6L-5773 [1] GASKET  
4. 4N-0444 [2] SPACER  
5. 2P-0726 [1] SPRING  
6. 4N-8179 [1] PIN  
7. 4L-3776 [1] BOLT  
8. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL  
9. 4N-5658 [1] PLUG  
10. 5M-6214 [1] PLUG  
11. 4N-0610 [1] DIAPHRAGM  
12. 4F-7957 [2] BOLT  
13. 4N-0609 [1] COVER  
14. 4N-8507 [2] COVER  
15. 4N-0117 [2] GASKET  
16. 8F-6302 [1] BOLT  
17. 0S-1615 [3] BOLT  
 

#UEG0896S0157
 

6N-0273: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N273 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 2--Type 3
Serial No. 23C842 to 23C950 inclusive
Part of 6N309 Governor and Fuel Injection Pump Group shown on Page 71
4N1836 Governor & Fuel Injection Pump parts are shown on Pages 74 through 77
c158690 UEG0896S
6N0273 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2831 [1] ADAPTER ASSEM.  
    (Includes)
2. 3N-2813 [1] SEAL  
3. 4N-9467 [2] BEARING  
4. 3N-2820 [1] LEVER ASSEM.  
    (Includes)
5. 7L-4993 [1] DOWEL  
6. 3N-2822 [1] LEVER  
7. 9F-1707 [1] BOLT  
8. 3N-2832 [1] GASKET  
9. 6N-2957 [2] WASHER  
10. 4N-1836 RY [1] FUEL INJECTION PUMP GROUP  
    (Separate Illustration)
11. 4N-5490 [1] BASE ASSEM.  
    (Includes)
12. 9S-4167 [1] STUD  
13. 9F-6580 [2] BOLT  
14. 0S-1615 [13] BOLT  
15. 4N-9336 [1] DISC  
16. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
17. 8S-4710 [1] BOLT  
18. 6D-0238 [1] VALVE ASSEM.  
19. 9F-7022 [1] BOLT  
20. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
21. 4N-4431 [1] GASKET  
  6N-2810 [1] CHANNEL  
22. 4N-4351 [1] COVER  
  4N-9057 [1] GASKET  
23. 3N-2826 [1] BASE  
24. 6N-2843 [1] GASKET  
25. 3N-2815 [1] SHAFT  
26. 4N-0159 [1] GASKET  
27. 3N-2824 [1] LEVER ASSEM.  
28. 2N-2658 [1] BOLT  
29. 6N-2956 [1] WASHER  
30. 6N-0248 [1] SHAFT ASSEM.  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#UEG0896S0158
 

6N-0273: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N273 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 2--Type 3
Serial No. 23C842 to 23C950 inclusive
Part of 6N309 Governor and Fuel Injection Pump Group shown on Page 71
c158691 UEG0896S
6N0273 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-0762 [6] BOLT  
2. 3L-5987 [1] COVER  
3. 6L-5773 [1] GASKET  
4. 4N-0444 [2] SPACER  
5. 2P-0726 [1] SPRING  
6. 4N-8179 [1] PIN  
7. 4L-3776 [1] BOLT  
8. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL  
9. 4N-5658 [1] PLUG  
10. 2S-4652 C [2] WASHER  
11. 0S-1615 C [3] BOLT  
12. 0S-1616 C [2] BOLT  
13. 6N-5933 C [1] COVER  
14. 4N-8507 [2] COVER  
15. 4N-0117 [2] GASKET  
16. 8F-6302 [1] BOLT  
17. 0S-1615 [3] BOLT  
  C   INDICATES CHANGE
 

#UEG0896S0159
 

6N-6269: GOV & FUEL INJ PUMP GP

6N6269 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 2--Type 1
Serial No. 23C951-Up
Part of 6N6213 Governor & Fuel Injection Pump Group shown on Page 71A
6N5355 Pump parts are shown on Pages 77A through 77D
c158695 UEG0896S
6N6269 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7375 [1] ADAPTER ASSEM.  
    (Includes)
2. 3N-2813 [1] SEAL  
3. 4N-9467 [2] BEARING  
4. 3N-2820 [1] LEVER ASSEM.  
    (Includes)
5. 4S-9487 [1] DOWEL  
6. 3N-9633 [1] LEVER ASSEM.  
    (Includes)
  5H-8985 [1] PIN  
7. 9F-1707 [1] BOLT  
8. 6N-6597 [1] GASKET  
9. 6N-0248 [1] SHAFT ASSEM.  
10. 6N-5355 Y [1] FUEL INJECTION PUMP GROUP  
    (Separate Illustration)
11. 4N-5490 [1] BASE ASSEM.  
    (Includes)
12. 9S-4167 [1] STUD  
13. 9F-6580 [2] BOLT  
14. 0S-1615 [13] BOLT  
15. 4N-9336 [1] DISC  
16. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
17. 8S-4710 [1] BOLT  
18. 6D-0238 [1] VALVE ASSEM.  
19. 9F-7022 [1] BOLT  
20. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
21. 4N-4431 [1] GASKET  
  6N-2810 [1] CHANNEL  
22. 4N-4351 [1] COVER  
  4N-9057 [1] GASKET  
23. 6N-6994 [1] BASE  
24. 6N-2843 [1] GASKET  
25. 3N-2815 [1] SHAFT  
26. 4N-0159 [1] GASKET  
27. 3N-2824 [1] LEVER ASSEM.  
    (Includes)
  6N-0265 [1] DOWEL  
28. 2N-2658 [1] BOLT  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet
1979/08/22
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Explanation Of Differences In Timing Advance Information
1981/08/26
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals
1981/09/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Seal Used On Governor Control Shaft
1982/12/15
New Gasket And Cover Used On Governors
1983/04/27
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Equipment
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (4N4864)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (7L543 and 2N8603)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governors
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Output Shaft Governor<BR> (8L8661)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Equipment
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Adjustable &quot;Dashpot&quot;<BR> (Close Regulation Type Governor)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel System Timing<BR> (Engines With Timing Pointer)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance Unit
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor<BR> (8N6774)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor Control
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Transfer Pump
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Adapter Housing And Levers
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Check Valve And Bypass Valve
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
New Gasket And Cover Used On Governors{1264}
1983/04/25
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Tachometer Drive Adapter Has Increased Service Life{7462,1288}
1979/01/22
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog 3306 :

GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0309 GOVERNOR AND FUEL INJECTION PUMP GROUP
FILTER AS-FUEL
1P-2299 FILTER AS-FUEL
METER GP-SERVICE
4N-6656 METER GP-SERVICE
GAUGE GP-AIR CLEANER
2N-3322 GAUGE GP-AIR CLEANER
CAP GP-AIR CLEANER
5L-8091 CAP GP-AIR CLEANER
PRECLEANER GP
5L-7942 PRECLEANER GP
AIR CLEANER GP
6N-3686 AIR CLEANER GP
AIR CLEANER GP
7L-0250 AIR CLEANER GP
GOVERNOR SPRINGS
6N-6901 CONVERSION GP-GOVERNOR
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0273 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0273 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0273 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0273 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0273 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0273 GOVERNOR AND FUEL INJECTION PUMP GROUP

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.