AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GPFUEL SYSTEM
GOVERNOR GPTORQUE CONTROL GP
GOVERNOR GP
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP#UEG0899S0150
6N-9148: CAP GP-AIR CLEANER
6N9148 AIR CLEANER CAP GROUP--Type 1
Serial No. 67D1735-Up. 5L8091 Cap parts are shown on Page 56. AN ATTACHMENT
Serial No. 67D1735-Up. 5L8091 Cap parts are shown on Page 56. AN ATTACHMENT
Parts for your 3306 MARINE ENGINE:
CATERPILLAR SIS#UEG0899S0151
6N-9148: CAP GP-AIR CLEANER
6N9148 AIR CLEANER CAP GROUP--Type 2
Serial No. 67D1735-Up. 5L8091 Cap parts are shown on Page 56. AN ATTACHMENT
Serial No. 67D1735-Up. 5L8091 Cap parts are shown on Page 56. AN ATTACHMENT
#UEG0899S0152
6N-6901: CONVERSION GP-GOVERNOR
6N6901 CLOSE REGULATION GOVERNOR CONVERSION GROUP
FIELD INSTALLATION
FIELD INSTALLATION
Parts for your 3306 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4N-6547 | [1] | HOUSING ASSEMBLY ADJUSTABLE ORIFICE GOVERNOR | ||
| Includes: | ||||
| 5M-6214 | [1] | PLUG | ||
| 4N-0260 | [2] | SEAL | ||
| 4N-2333 | [1] | DOWEL | ||
| 4N-2786 | [1] | SEAL | ||
| 8S-6814 | [2] | DOWEL | ||
| 6N-2578 | [1] | BEARING | ||
| 9S-4180 | [1] | PLUG | ||
| 6N-4655 | [1] | DASHPOT ASSEMBLY | ||
| 4N-0594 | [1] | GASKET GOVERNOR HOUSING TO FUEL PUMP HOUSING | ||
| 4N-5485 | [1] | BODY VALVE | ||
| 4N-5484 | [1] | VALVE NEEDLE | ||
| 6H-9691 | [1] | SEAL VALVE TO BODY | ||
| 5F-9144 | [1] | SEAL BODY TO GOVERNOR HOUSING | ||
| 4N-5524 | [3] | WEIGHTS GOVERNOR | ||
| 4N-1723 | [1] | SHIELD WEIGHT CARRIER | ||
| 4N-2955 | [3] | BOLT WEIGHT CARRIER TO CAMSHAFT | ||
| 3H-0442 | [1] | SEAL RISER LEVER SHAFT | ||
| 4N-0049 | [1] | GASKET IDLE ADJUSTMENT COVER | ||
| 4N-0508 | [1] | GASKET TORQUE SPRING COVER | ||
| 4N-0159 | [1] | GASKET ADAPTER TO GOVERNOR HOUSING | ||
| 6L-5773 | [1] | GASKET SMOKE LIMITER TO SHUT-OFF HOUSING | ||
| 4N-0117 | [2] | GASKET SOLENOID TO SHUT-OFF HOUSING | ||
| 4N-4221 | [1] | SPRING (2) PINK STRIPES | ||
| 4N-4223 | [1] | SPRING (2) YELLOW STRIPES | ||
| 4N-4224 | [1] | SPRING (2) YELLOW AND (1) WHITE STRIPE | ||
| 4N-0402 | [1] | GASKET THROTTLE COVER | ||
| 6N-6597 | [1] | GASKET SHUT-OFF HOUSING TO ADAPTER | ||
| 6N-8158 | [1] | SPRING (3) GREEN AND (1) YELLOW STRIPE | ||
| 6N-8157 | [1] | SPRING (3) PINK AND (1) WHITE STRIPE | ||
| 4N-9191 | [1] | SPRING (2) WHITE AND (1) PINK STRIPE | ||
| 4N-9192 | [1] | SPRING (2) PINK AND (1) WHITE STRIPE | ||
#UEG0899S0153
6N-7606: GOV & FUEL INJ PUMP GP
6N7606 GOVERNOR AND FUEL INJECTION PUMP GROUP
Field Replacement for 6N310--Page 57 and 6N6214--Page 57A
Field Replacement for 6N310--Page 57 and 6N6214--Page 57A
Parts for your 3306 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6N-7614 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| Y | SEPARATE ILLUSTRATION | |||
#UEG0899S0154
6N-7614: GOV & FUEL INJ PUMP GP
6N7614 GOVERNOR AND FUEL INJECTION PUMP GROUP--Field Installation
6N509--Page 57 and 6N5355--Page 63A. Part of 6N7607 Governor and Fuel Injection Pump
6N509--Page 57 and 6N5355--Page 63A. Part of 6N7607 Governor and Fuel Injection Pump
Parts for your 3306 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8S-4710 | [ 2] | BOLT | |
| 2. | 4N-0053 | [ 1] | COVER | |
| 4N-0159 | [ 1] | GASKET | ||
| 3. | 0S-1616 | [ 1] | BOLT | |
| 4. | 6N-2843 | [ 1] | GASKET | |
| 5. | 4N-5490 | [ 1] | BASE ASSEM. | |
| (Includes) | ||||
| 6. | 9S-4167 | [ 1] | STUD | |
| 7. | 9S-8597 | [ 1] | SPRING | |
| 8. | 6N-0509 Y | [ 1] | CONTROL GROUP | |
| 9. | 6N-5355 Y | [ 1] | PUMP GROUP | |
| 10. | 9F-7022 | [ 1] | BOLT | |
| 11. | 4N-9336 | [ 1] | DISC | |
| 12. | 4N-7572 | [ 1] | ELBOW | |
| 4N-9337 | [ 1] | GASKET | ||
| 13. | 0S-1615 | [ 13] | BOLT | |
| 14. | 9F-6580 | [ 2] | BOLT | |
| 15. | 8S-4710 | [ 1] | BOLT | |
| 16. | 7N-0450 C | [ 1] | VALVE ASSEM. | |
| 17. | 9S-4180 | [ 1] | PLUG | |
| 4J-7533 | [ 1] | SEAL | ||
| 18. | 4N-4431 | [ 1] | GASKET | |
| 6N-2810 | [ 1] | CHANNEL | ||
| 19. | 4N-4351 | [ 1] | COVER | |
| 4N-9057 | [ 1] | GASKET | ||
| 20. | 4N-0443 | [ 1] | PIN | |
| 21. | 6N-5170 C | [ 1] | SPRING | |
| 22. | 6N-0248 | [ 1] | SHAFT ASSEM. | |
| 23. | 4N-0444 | [ 2] | SPACER | |
| 24. | 4N-8179 | [ 1] | PIN | |
| 25. | 9S-4191 | [ 1] | PLUG | |
| 3J-1907 | [ 1] | SEAL | ||
| 26. | 4N-5050 | [ 2] | PLUG | |
| SEPARATE ILLUSTRATION | ||||
| INDICATES CHANGE | ||||
#UEG0899S0155
6N-0310: GOVERNOR AND FUEL INJECTION PUMP GROUP
6N310 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 67D1370 to 67D1774 inclusive. 6N270 Governor and Fuel Injection Pump
parts are shown on Pages 58, 59, 59A, 59B, 59C, 59D, 59E and 59F
Serial No. 67D1370 to 67D1774 inclusive. 6N270 Governor and Fuel Injection Pump
parts are shown on Pages 58, 59, 59A, 59B, 59C, 59D, 59E and 59F
Parts for your 3306 MARINE ENGINE:
CATERPILLAR SIS#UEG0899S0156
6N-0509: TORQUE CONTROL GP
6N509 TORQUE CONTROL GROUP
Part of 6N7614, 6N310, 6N6214, 6N6100 and 6N6244 Governor and Fuel Injection
Pump Groups shown on Pages 56D, 57, 57A and 63L
Part of 6N7614, 6N310, 6N6214, 6N6100 and 6N6244 Governor and Fuel Injection
Pump Groups shown on Pages 56D, 57, 57A and 63L
Parts for your 3306 MARINE ENGINE:
CATERPILLAR SIS#UEG0899S0157
6N-6214: GOV & FUEL INJ PUMP GP
6N6214 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 67D1775-Up. 6N509 Torque Control and 6N6270 Governor and Fuel
Injection Pump parts are shown on Pages 57, 59G and 59H. Note: 4N4222 Governor
Spring for nominal 10 percent Governor regulation below 2000 R.P.M.
is available
Serial No. 67D1775-Up. 6N509 Torque Control and 6N6270 Governor and Fuel
Injection Pump parts are shown on Pages 57, 59G and 59H. Note: 4N4222 Governor
Spring for nominal 10 percent Governor regulation below 2000 R.P.M.
is available
Parts for your 3306 MARINE ENGINE:
CATERPILLAR SIS#UEG0899S0158
6N-6100: GOVERNOR AND FUEL INJECTION PUMP GROUP
6N6100 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 67D1735-Up. 6N509 Torque Control and 6N3687 Governor and Fuel
Injection Pump parts are shown on Pages 57, 63E and 63F
Serial No. 67D1735-Up. 6N509 Torque Control and 6N3687 Governor and Fuel
Injection Pump parts are shown on Pages 57, 63E and 63F
Parts for your 3306 MARINE ENGINE:
CATERPILLAR SIS#UEG0899S0159
6N-6265: GOV & FUEL INJ PUMP GP
6N6265 GOVERNOR AND FUEL INJECTION PUMP GROUP--Type 1
Serial No. 67D1735-Up. Field Replacement for 6N6100--Page 57A
Serial No. 67D1735-Up. Field Replacement for 6N6100--Page 57A
Parts for your 3306 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6N-6244 Y | [1] | GOVERNOR AND FUEL INJECTION PUMP | ||
| 2H-3934 | [1] | SEAL .139" (3.53 MM) | ||
| 6L-5773 | [1] | GASKET .031" (.79 MM) | ||
| 8L-8601 | [7] | SPACER .002" (.05 MM) | ||
| 9L-5176 | [1] | SPRING | ||
| 9L-7235 | [3] | SHIM TORQUE SPRING .040" (1.02 MM) | ||
| 9L-9347 | [3] | SHIM .020" (.51 MM) | ||
| 8M-9064 | [2] | SHIM | ||
| 4N-0049 | [1] | GASKET IDLE SCREW COVER .031" (.79 MM) | ||
| 4N-0159 | [1] | GASKET .031" (.79 MM) | ||
| 4N-0402 | [1] | GASKET THROTTLE CONTROL COVER .031" (.79 MM) | ||
| 4N-0594 | [1] | GASKET GOVERNOR HOUSING .031" (.79 MM) | ||
| 4N-4225 | [1] | SPRING GOVERNOR | ||
| 6N-5170 | [1] | SPRING | ||
| 4N-4366 | [1] | SPRING | ||
| 4N-4227 | [1] | SPRING GOVERNOR | ||
| 4N-7777 | [4] | SPACER .010" (.25 MM) | ||
| 4N-9057 | [1] | GASKET SIDE COVER .030" (.76 MM) | ||
| 4N-9098 | [1] | SPACER .200" (5.08 MM) | ||
| 4N-9337 | [1] | GASKET FUEL RETURN ELBOW .031" (.79 MM) | ||
| 6N-2843 | [1] | GASKET FILTER BASE .031" (.79 MM) | ||
| 6N-3034 | [1] | SPRING | ||
| 6N-6597 | [1] | GASKET .031" (.79 MM) | ||
| 1P-0436 | [1] | GASKET PRIMING PUMP .047" (1.19 MM) | ||
| 1P-6453 | [1] | BAR | ||
| [1] | FILM | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
Engine News
Special Instruction
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Specifications
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Disassembly and Assembly
Service Magazine
Caterpillar Parts SIS Catalog 3306 :
Truck sale:
9,775
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
35,500
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
- Stationary Generator Sets
RING POWER CORP.
8,185
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
41,500
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
35,000
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC


