AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5S3394 CYLINDER BLOCK AND COVERS GROUP--End View--Part 2 of 2 Serial No. 43J2527 to 3373, 3382, 3384, 3406 to 3408, 3418 and 43J3419 inclusive Refer also to Page 133 for special parts 950


BASIC ENGINE
CYLINDER BLOCK GP
BALANCER GP
PISTON & ROD GP

WHEEL LOADER 950 WHEEL LOADER 43J
 950 WHEEL LOADER 43J00001-04063 (MACHINE) UEH0010S 950 43J   (1968)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS GROUP
5S-3394 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK AND COVERS GROUP
5S-3394 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK AND COVERS GROUP
5S-3394 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK AND COVERS GROUP
5S-3394 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK AND COVERS GROUP
5S-3394 CYLINDER BLOCK AND COVERS GROUP
 

#UEH0010S0050
 

5S-3394: CYLINDER BLOCK AND COVERS GROUP

5S3394 CYLINDER BLOCK AND COVERS GROUP--End View--Part 2 of 2
Serial No. 43J2527 to 3373, 3382, 3384, 3406 to 3408, 3418 and 43J3419 inclusive
Refer also to Page 133 for special parts
c113933 UEH0010S
5S3394 CYLINDER BLOCK AND COVERS GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [8] BOLT  
2. [1] LOCK  
3. [1] LOCK  
4. C [1] COVER  
5. [1] GASKET  
6. [6] NUT  
7. [11] LOCKWASHER  
8. C [1] COVER ASSEM.  
9. [1] STUD  
10. [2] DOWEL  
11. [4] STUD  
12. [2] BOLT  
13. [1] GASKET  
14. [1] CAP ASSEM.  
15. [1] GAUGE ASSEM.  
16. [1] TUBE ASSEM.  
17. [1] PIPE  
  [1] ANCHOR  
18. [1] LOCK  
19. [3] BOLT  
20. [1] SUPPORT ASSEM.  
21. [1] FITTING  
22. [4] BOLT  
  [4] LOCKWASHER  
23. [1] BUSHING ASSEM.  
24. [1] LOCK  
25. [13] BOLT  
26. [1] LOCK  
27. [1] LOCK  
28. [2] LOCK  
29. [2] LOCKWASHER  
30. [1] PLUG  
31. [1] GASKET  
32. [1] TUBE  
33. [2] FITTING  
34. [1] NUT  
  C   INDICATES CHANGE
 

#UEH0010S0051
 

5S-3394: CYLINDER BLOCK AND COVERS GROUP

5S3394 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 1 of 2
Serial No. 43J3461, 3467, 3468, 3470, 3472 to 3481, 3483, 3485 to 3518, 3521, 3525,
3530, 3543, 3577 and 43J3589 inclusive. 6A6194 Cylinder Block parts are shown on
Page 26A. See Page 29 for Gasket Kit
c156943 UEH0010S
5S3394 CYLINDER BLOCK AND COVERS GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-8889 C [4] LINER  
2. 5S-6670 C [12] SEAL  
3. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
4. 0L-1351 [12] BOLT  
5. 3B-4506 [53] LOCKWASHER  
6. 8M-3023 [1] ORIFICE  
7. 9H-5921 [1] GASKET  
8. 6A-6194 YC [1] BLOCK ASSEM.  
    (Separate Illustration)
9. 9S-2273 [1] PLATE ASSEM.  
10. 5S-7134 [1] GASKET  
11. 0S-1594 [8] BOLT  
12. 5B-8030 [1] SPACER  
13. 5S-7135 [1] GASKET  
14. 0L-1143 [9] BOLT  
15. 0S-1588 [18] BOLT  
16. 8S-8234 [1] PAN ASSEM.  
17. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
18. 7S-0566 [1] HOUSING (Flywheel)  
19. 5M-6213 [4] PLUG  
20. 9H-6067 [1] SEAL  
21. 8S-0499 [1] TUBE ASSEM.  
22. 8S-1963 [1] GASKET  
23. 1A-2029 [6] BOLT  
24. 5S-6045 [1] GASKET  
25. 8S-1959 [1] PLATE ASSEM.  
26. 5M-6214 [1] PLUG  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEH0010S0052
 

5S-3394: CYLINDER BLOCK AND COVERS GROUP

5S3394 CYLINDER BLOCK AND COVERS GROUP--End View--Part 2 of 2
Serial No. 43J3461, 3467, 3468, 3470, 3472 to 3481, 3483, 3485 to 3518, 3521, 3525,
3530, 3543, 3577 and 43J3589 inclusive. Refer also to Page 133 for special parts
c145396 UEH0010S
5S3394 CYLINDER BLOCK AND COVERS GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [8] BOLT  
2. 9S-3188 [1] LOCK  
3. 9S-3187 [1] LOCK  
4. 2N-2753 [1] COVER  
5. 9H-4891 [1] GASKET  
6. 1B-4203 [6] NUT  
7. 3B-4506 [11] LOCKWASHER  
8. 9S-8991 [1] COVER ASSEM.  
9. 3B-2460 [1] STUD  
10. 8S-6814 [2] DOWEL  
11. 0T-0101 [4] STUD  
12. 1C-2251 [2] BOLT  
13. 5S-8055 [1] GASKET  
14. 7S-1803 [1] CAP ASSEM.  
15. 5S-8115 [1] GAUGE ASSEM.  
16. 5S-8059 C [1] TUBE ASSEM.  
17. 7S-0637 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 4M-4419 [1] LOCK  
19. 1A-2029 [3] BOLT  
20. 7S-1776 [1] SUPPORT ASSEM.  
21. 8S-1326 [1] FITTING  
22. 0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
23. 7S-1234 [1] BUSHING ASSEM.  
24. 5M-9131 [1] LOCK  
25. 0S-1587 [13] BOLT  
26. 5M-9136 [1] LOCK  
27. 5M-9132 [1] LOCK  
28. 7M-7205 [2] LOCK  
30. 4B-2363 [1] PLUG  
  6F-4868 [1] GASKET  
31. 5M-6214 C [1] PLUG  
  C   INDICATES CHANGE
 

#UEH0010S0053
 

5S-3394: CYLINDER BLOCK AND COVERS GROUP

5S3394 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 1 of 2
Serial No. 43J3374 to 3381, 3383, 3385 to 3405, 3409 to 3417, 3420 to 3460, 3462 to 3466, 3469, 3471,
3482, 3484, 3519, 3420, 3422 to 3524, 3526 to 3529, 3531 to 3542, 3544 to 3576, 3578 to 3588 & 43J3590-Up.
6A6194 Block parts are shown on Page 26A. See Page 29 for Gasket Kit
c156943 UEH0010S
5S3394 CYLINDER BLOCK AND COVERS GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-8889 C [4] LINER  
2. 5S-6670 C [12] SEAL  
3. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
4. 0L-1351 [12] BOLT  
5. 3B-4506 [53] LOCKWASHER  
6. 8M-3023 [1] ORIFICE  
7. 9H-5921 [1] GASKET  
8. 6A-6194 YC [1] BLOCK ASSEM.  
    (Separate Illustration)
9. 9S-2273 [1] PLATE ASSEM.  
10. 5S-7134 [1] GASKET  
11. 0S-1594 [8] BOLT  
12. 5B-8030 [1] SPACER  
13. 5S-7135 [1] GASKET  
14. 0L-1143 [9] BOLT  
15. 0S-1588 [18] BOLT  
16. 8S-8234 [1] PAN ASSEM.  
17. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
18. 7S-0566 [1] HOUSING (Flywheel)  
19. 5M-6213 [4] PLUG  
20. 9H-6067 [1] SEAL  
21. 8S-0499 [1] TUBE ASSEM.  
22. 8S-1963 [1] GASKET  
23. 1A-2029 [6] BOLT  
24. 5S-6045 [1] GASKET  
25. 8S-1959 [1] PLATE ASSEM.  
26. 5M-6214 [1] PLUG  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEH0010S0054
 

5S-3394: CYLINDER BLOCK AND COVERS GROUP

5S3394 CYLINDER BLOCK AND COVERS GROUP--End View--Part 2 of 2
Serial No. 43J3374 to 3381, 3383, 3385 to 3405, 3409 to 3417, 3420 to 3460, 3462 to 3466, 3469, 3471,
3482, 3484, 3519, 3520, 3522 to 3524, 3526 to 3529, 3531 to 3542, 3544 to 3576, 3578 to 3588 and
43J3590-Up. Refer also to Page 133 for special parts
c156944 UEH0010S
5S3394 CYLINDER BLOCK AND COVERS GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [8] BOLT  
2. 9S-3188 [1] LOCK  
3. 9S-3187 [1] LOCK  
4. 2N-2753 [1] COVER  
5. 9H-4891 [1] GASKET  
6. 1B-4203 [6] NUT  
7. 3B-4506 [11] LOCKWASHER  
8. 9S-8991 [1] COVER ASSEM.  
9. 3B-2460 [1] STUD  
10. 8S-6814 [2] DOWEL  
11. 0T-0101 [4] STUD  
12. 1C-2251 [2] BOLT  
13. 5S-8055 [1] GASKET  
14. 7S-1803 [1] CAP ASSEM.  
15. 5S-8115 [1] GAUGE ASSEM.  
16. 9S-1796 [1] TUBE ASSEM.  
17. 7S-0637 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 4M-4419 [1] LOCK  
19. 1A-2029 [3] BOLT  
20. 7S-1776 [1] SUPPORT ASSEM.  
21. 8S-1326 [1] FITTING  
22. 0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
23. 7S-1234 [1] BUSHING ASSEM.  
24. 5M-9131 [1] LOCK  
25. 0S-1587 [13] BOLT  
26. 5M-9136 [1] LOCK  
27. 5M-9132 [1] LOCK  
28. 7M-7205 [2] LOCK  
29. 3B-4508 [2] LOCKWASHER  
30. 4B-2363 [1] PLUG  
31. 6F-4868 [1] GASKET  
32. 6A-3243 [1] TUBE  
33. 3B-8998 [2] FITTING  
34. 1F-1344 [1] NUT  
 

#UEH0010S0055
 

5S-6407: CYLINDER BLOCK ASSEMBLY

5S6407 CYLINDER BLOCK ASSEMBLY
Serial No. 43J1 to 3373, 3382, 3384, 3406 to 3408, 3418 and 64J3419 inclusive
Part of 5S3394 Cylinder Block and Covers Group shown on Pages 24, 24B, 24D & 24F
Note: For Field Replacement order 8S3711 Service Block Assembly
c130130 UEH0010S
5S6407 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [1] PLUG  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 3S-8313 [2] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 1H-0974 [1] DOWEL  
10. 8S-4676 [5] CAP GROUP  
  8S-4674 [10] SHIM (Long)  
    (2 in each 8S4676 Group)
  8S-4673 [30] SHIM (Short)  
    (6 in each 8S4676 Group)
    -or-
  1P-2717 [5] BEARING CAP  
11. 7S-3224 [10] BOLT  
12. 2S-5658 [10] WASHER  
13. 8S-0835 [1] DOWEL  
14. 5S-6420 [2] BEARING  
15. 4B-9782 [5] BALL  
16. 5S-6419 [4] BEARING  
17. 2A-3798 [2] DOWEL  
18. 7M-4046 [2] BEARING  
 

#UEH0010S0056
 

6A-6194: CYLINDER BLOCK ASSEMBLY

6A6194 CYLINDER BLOCK ASSEMBLY
Serial No. 43J3374 to 3381, 3383, 3385 to 3405, 3409 to 3417 and 43J3420-Up. Part of 5S3394 Cylinder
Block and Covers Group shown on Pages 24H & 24K. Note: For Field Replacement order 6A6194 Block
Assembly plus 1--2P8783 Hardware Kit
c156945 UEH0010S
6A6194 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [2] BEARING  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 5M-6213 [1] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 1P-2717 [5] CAP  
10. 7S-3224 [10] BOLT  
11. 2S-5658 [10] WASHER  
12. 5S-6420 [2] BEARING  
13. 4B-9782 [5] BALL  
14. 5S-6419 [4] BEARING  
15. 2A-3798 [2] DOWEL  
 

#UEH0010S0057
 

5S-6425: BALANCER GP

BALANCER (5S6425 N/S)
c105525 UEH0010S
5S6425 BALANCER GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1N-8354 [2] LOCK  
  0S-1594 [4] BOLT  
  8S-0743 [1] SHAFT (RIGHT HAND-20 TEETH)  
  8S-0744 [1] SHAFT (LEFT HAND-20 TEETH)  
  4S-6417 [2] PLATE  
 

#UEH0010S0058
 

5S-6429: CONNECTING ROD AND PISTON

CONNECTING ROD AND PISTON (5S6429 N/S)--4 Required
Serial No. 43J1 to 2057, 2059 to 2076, 2081, 2082, 2085, 2086, 2089,
2091 to 2093, 2095, 2096, 2101, 2104, 2111, 2139, 2143, 2159, 2170 &
43J2174 inclusive. Note: 8S4635 Piston & Liner Group, consisting of:
1--Piston, 1--Liner and 2--Seal, is available
c203943 UEH0010S
5S6429 CONNECTING ROD AND PISTON Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4029 C [1] PISTON ASSEM.  
2. 7S-8378 [1] RING (Top)  
3. 5S-6750 [1] RING (Intermediate)  
4. 9S-7788 [1] RING (Oil)  
5. 7M-7821 [1] BEARING (Standard)  
  2S-0502 [1] BEARING (.010" Undersize)  
  2S-0503 [1] BEARING (.020" Undersize)  
  7M-7826 [1] BEARING (.030" Undersize)  
6. 5S-6360 [1] ROD ASSEM.  
  7S-9347 [1] BEARING  
7. 1P-9956 C [2] BOLT  
8. 5S-6348 [2] NUT  
9. 9H-4016 [1] PIN  
10. 9H-4015 [2] RETAINER  
  7S-9404 [1] RING GROUP  
    (Consists of Complete set of Rings FOR ONE PISTON)
  C   INDICATES CHANGE
 

#UEH0010S0059
 

9S-8912: PISTON & ROD GP

CONNECTING ROD AND PISTON (9S8912 N/S)--4 Required
Serial No. 43J2058, 2077 to 2080, 2083, 2084, 2087, 2088, 2090, 2094,
2097 to 2100, 2102, 2103, 2105 to 2110, 2112 to 2138, 2140 to 2142,
2144 to 2158, 2160 to 2169, 2171 to 2173 & 43J2175-Up. Note: 9S8914
Piston & Liner Group, consisting of: 1-Piston, 1-Liner and
2-Seal, is available
c112402 UEH0010S
9S8912 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9H-4016 [1] PIN  
2. 9H-4015 [2] RETAINER  
3. 5S-6360 [1] ROD ASSEM.  
  7S-9347 [1] BEARING  
4. 1P-9956 [2] BOLT  
  5S-6348 [2] NUT  
5. 7M-7821 [1] BEARING (Standard)  
  2S-0502 [1] BEARING (.010" Undersize)  
  2S-0503 [1] BEARING (.020" Undersize)  
  7M-7826 [1] BEARING (.030" Undersize)  
6. 9S-8913 [1] PISTON ASSEM.  
7. 9S-7788 [1] RING (Oil)  
8. 5S-6750 [1] RING (Intermediate)  
9. 7S-8378 [1] RING (Top)  
  7S-9404 [1] RING GROUP  
    (CONSISTS OF COMPLETE SET OF RINGS FOR ONE PISTON
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Cylinder Block
3304 VEHICULAR ENGINE
Cylinder Liner
3304 VEHICULAR ENGINE
Cylinder Liner Projection
3304 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3304 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Disassembly and Assembly
Crankshaft Main Bearings
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Spacer Plate
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Cylinder Liners (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Cylinder Liners (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Camshaft Bearings
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines {1210,1211}
1999/01/18
Improved Seal Kits for Cylinder Liner Kits {1216}
2005/11/14

Caterpillar Parts SIS Catalog 950 :

CYLINDER BLOCK AND COVERS GROUP
5S-3394 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER HEAD AND VALVE MECHANISM
8S-3716 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER BLOCK AND COVERS GROUP
5S-3394 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK AND COVERS GROUP
5S-3394 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK AND COVERS GROUP
5S-3394 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK AND COVERS GROUP
5S-3394 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK ASSEMBLY
5S-6407 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
6A-6194 CYLINDER BLOCK ASSEMBLY
BALANCER GP
5S-6425 BALANCER GP
CONNECTING ROD AND PISTON
5S-6429 CONNECTING ROD AND PISTON

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.