AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

955K TRAXCAVATOR 64J00001-03993 (MACHINE) WORK TOOLS Caterpillar SIS



TRACK LOADER 955L TRACK LOADER 64J
 955K TRAXCAVATOR 64J00001-03993 (MACHINE) UEH0013S 955L 64J   (1976)

Parts group 955L:

  For full view, you need register
WORK TOOLS
BUCKET GP
BUCKET ASSEMBLY
5K-6401 BUCKET ASSEMBLY
5K6401 BUCKET ASSEMBLY--General Purpose--1 3/4 Cubic Yard--86" Wide
Serial No. 64J1 to 64J2573 inclusive
Refer also to Pages 126A, 127, 128, 130, 131 and 135 for special parts
BUCKET ASSEMBLY
5K-6401 BUCKET ASSEMBLY
5K6401 BUCKET ASSEMBLY--General Purpose--1 3/4 Cubic Yard--86" Wide
Effective with Serial No. 64J2574
Refer also to Pages 126A, 127, 128, 130, 131 and 135 for special parts
BUCKET ASSEMBLY
6K-0326 BUCKET ASSEMBLY
6K326 BUCKET ASSEMBLY--2 Cubic Yard--86" Wide--Loose Material
Serial No. 64J1 to 64J2191 inclusive. For maximum stability use 6K7710
Counterweight Group. Only separate parts serviced
When complete Group is required order 8K7865 shown on Pages 124E and 124F
BUCKET ASSEMBLY
6K-0326 BUCKET ASSEMBLY
6K326 BUCKET ASSEMBLY--2 Cubic Yard--86" Wide--Loose Material
Serial No. 64J2192-Up. For maximum stability use 6K7710 Counterweight Group
Only separate parts serviced. When complete Group is required order 8K7865 shown on Pages 124E and 124F
BUCKET ASSEMBLY
8K-7865 BUCKET ASSEMBLY
8K7865 BUCKET ASSEMBLY--2.25 Cubic Yard--88.50" Wide--Type 1
Loose Material
BUCKET ASSEMBLY
8K-7865 BUCKET ASSEMBLY
8K7865 BUCKET ASSEMBLY--2.25 Cubic Yard--88.50" Wide--Type 2
Loose Material
SPILL PLATE EXTENSION GROUP
5K-9156 SPILL PLATE EXTENSION GROUP
5K9156 SPILL PLATE EXTENSION GROUP
FOR USE WITH 86" WIDE BUCKET ASSEMBLIES
SPILL PLATE EXTENSION GROUP
5K-9997 SPILL PLATE EXTENSION GROUP
5K9997 SPILL PLATE EXTENSION GROUP
FOR USE WITH 6K703 SIDE DUMP BUCKET ARRANGEMENT LISTED ON PAGE 135
SPILL PLATE EXTENSION GROUP
5K-3659 SPILL PLATE EXTENSION GROUP
5K3659 SPILL PLATE EXTENSION GROUP
FOR USE WITH ROCK LOADING BUCKET ASSEMBLY
ROCK BUCKET SIDE PLATE GROUP
5K-4188 ROCK BUCKET SIDE PLATE GROUP
5K4188 ROCK BUCKET SIDE PLATE GROUP--FIELD INSTALLATION
FOR USE WITH ROCK LOADING BUCKET ASSEMBLY
ROCK LOADING BUCKET ASSEMBLY
6K-1006 ROCK LOADING BUCKET ASSEMBLY
6K1006 ROCK LOADING BUCKET ASSEMBLY--2 CUBIC YARDS--90" WIDE
GENERAL PURPOSE BUCKET GROUP
9K-8457 GENERAL PURPOSE BUCKET GROUP
9K8457 GENERAL PURPOSE BUCKET GROUP--2.00 Cubic Yard--88.50" Wide
9K8462 Bucket parts are shown on Page 130C
GENERAL PURPOSE BUCKET GROUP
3A-3746 GENERAL PURPOSE BUCKET GROUP
3A3746 GENERAL PURPOSE BUCKET GROUP--2.00 Cubic Yard--88.50" Wide--Type 1
9K8462 Bucket parts are shown on Page 130C
GENERAL PURPOSE BUCKET GROUP
3A-3746 GENERAL PURPOSE BUCKET GROUP
3A3746 GENERAL PURPOSE BUCKET GROUP--2.00 Cubic Yard--88.50" Wide--Type 2
9K8462 Bucket parts are shown on Page 130C
GENERAL PURPOSE BUCKET GROUP
9K-8453 GENERAL PURPOSE BUCKET GROUP
9K8453 GENERAL PURPOSE BUCKET GROUP--2.25 Cubic Yard--88.50" Wide--Type 1
9K8468 Bucket parts are shown on Page 130D
GENERAL PURPOSE BUCKET GROUP
9K-8453 GENERAL PURPOSE BUCKET GROUP
9K8453 GENERAL PURPOSE BUCKET GROUP--2.25 Cubic Yard--88.50" Wide--Type 2
9K8468 Bucket parts are shown on Page 130D
GENERAL PURPOSE BUCKET GROUP
9K-8453 GENERAL PURPOSE BUCKET GROUP
9K8453 GENERAL PURPOSE BUCKET GROUP--2.25 Cubic Yard--88.50" Wide--Type 3
9J3167 Tip and 9K8468 Bucket parts are shown on Pages 130A-1 and 130D
BUCKET GROUP
3A-3745 BUCKET GROUP
3A3745 BUCKET GROUP--Loose Material--2.25 Cubic Yard--88.50" Wide
9K8468 Bucket parts are shown on Page 130D
GENERAL PURPOSE BUCKET ASSEMBLY
9K-8462 GENERAL PURPOSE BUCKET ASSEMBLY
9K8462 GENERAL PURPOSE BUCKET ASSEMBLY--2.00 Cubic Yard--88.50" Wide
Part of 9K8457 and 3A3746 General Purpose Bucket Groups shown on Pages 130A and 130A-1
GENERAL PURPOSE BUCKET ASSEMBLY
9K-8468 GENERAL PURPOSE BUCKET ASSEMBLY
9K8468 GENERAL PURPOSE BUCKET ASSEMBLY--2.25 Cubic Yard--88.50" Wide
Part of 9K8453 General Purpose Bucket and 3A3745 Loose Material Bucket Group shown on Page 130B
6K-1097 MULTI-PURPOSE BUCKET ARRANGEMENT
6K1097 MULTI-PURPOSE BUCKET ARRANGEMENT
1.75 Cubic Yard--88.60" Wide. Only separate parts serviced. When complete
Arrangement is required order 9K8817 shown on Page 131A
9K-8817 MULTI-PURPOSE BUCKET ARRANGEMENT
9K8817 MULTI-PURPOSE BUCKET ARRANGEMENT
2.00 Cubic Yard--91.12" Wide
MULTI-PURPOSE BUCKET GROUP
6K-3275 MULTI-PURPOSE BUCKET GROUP
6K3275 MULTI-PURPOSE BUCKET GROUP--1.75 CUBIC YARD--88.62" WIDE
PART OF 6K1097 MULTI-PURPOSE BUCKET ARRANGEMENT LISTED ON PAGE 131
MULTI-PURPOSE BUCKET LINES GROUP
6K-4151 MULTI-PURPOSE BUCKET LINES GROUP
6K4151 MULTI-PURPOSE BUCKET LINES GROUP
PART OF 6K1097 MULTI-PURPOSE BUCKET ARRANGEMENT LISTED ON PAGE 131
BUCKET GP-MULTI-PURPOSE
9K-8623 BUCKET GP-MULTI-PURPOSE
9K8623 MULTI-PURPOSE BUCKET GROUP--2.00 Cubic Yard--91.12" Wide
Part of 9K8817 Multi-Purpose Bucket Arrangement listed on Page 131A
6K-0703 SIDE DUMP BUCKET ARRANGEMENT
6K703 SIDE DUMP BUCKET ARRANGEMENT--1.75 CUBIC YARD
ONLY SEPARATE PARTS SERVICED. NOTE: A COUNTERWEIGHT IS REQUIRED
BUCKET & SUPPORT GP
6K-0576 BUCKET & SUPPORT GP
6K576 BUCKET AND SUPPORT GROUP--1.75 CUBIC YARD
PART OF 6K703 SIDE DUMP BUCKET ARRANGEMENT LISTED ON PAGE 135
FORK GP
LOG FORK GROUP
6K-1011 LOG FORK GROUP
6K1011 LOG FORK GROUP--Type 1
LOG FORK GROUP
6K-1011 LOG FORK GROUP
6K1011 LOG FORK GROUP--Type 2
LOG FORK GROUP
6K-1011 LOG FORK GROUP
6K1011 LOG FORK GROUP--Type 3
6K-1012 TOP CLAMP ARRANGEMENT
6K1012 TOP CLAMP ARRANGEMENT
For use with 6K1011 Log Fork Group
LOG FORK GROUP
6K-1011 LOG FORK GROUP
6K1011 LOG FORK GROUP--Type 4
TOP CLAMP GROUP
6K-5102 TOP CLAMP GROUP
6K5102 TOP CLAMP GROUP
PART OF 6K1012 TOP CLAMP ARRANGEMENT LISTED ON PAGE 139
GROUND ENGAGING TOOLS (G.E.T.)
TOOTH GROUP
8J-1128 TOOTH GROUP
8J1128 TOOTH GROUP
FOR USE WITH 6K703 SIDE DUMP BUCKET LISTED ON PAGE 135
Only separate parts serviced
TOOTH GROUP
7J-8734 TOOTH GROUP
7J8734 TOOTH GROUP
FOR USE WITH 86" WIDE BUCKET
ASSEMBLIES AND MULTI-PURPOSE BUCKET
TOOTH GROUP
8J-5197 TOOTH GROUP
8J5197 TOOTH GROUP--Extreme Service
Only separate parts serviced. FOR USE WITH
GENERAL PURPOSE AND LOOSE MATERIAL BUCKETS
TOOTH GROUP
8J-5192 TOOTH GROUP
8J5192 TOOTH GROUP--Standard
Only separate parts serviced. FOR USE WITH GENERAL PURPOSE BUCKETS
TOOTH GROUP
5K-8959 TOOTH GROUP
5K8959 TOOTH GROUP--SHORT TIP
FOR USE WITH MULTI-PURPOSE BUCKET AND 86" WIDE BUCKET ASSEMBLIES
TOOTH GROUP
6K-1339 TOOTH GROUP
6K1339 TOOTH GROUP--SHORT TIP
FOR USE WITH 6K703 SIDE DUMP BUCKET LISTED ON PAGE 135
TOOTH GROUP
5K-8958 TOOTH GROUP
5K8958 TOOTH GROUP--SHORT TIP
FOR USE WITH MULTI-PURPOSE BUCKET AND 86" WIDE BUCKET ASSEMBLIES
TIP GP-LONG
9J-3167 TIP GP-LONG
9J3167 TIP GROUP--Long
Part of 9K8453 General Purpose Bucket Group shown on Page 130B

Information:

(For parts list, see above)

Special Instruction
Installation Of Bucket Hinge Pin Bearing Bosses{6119}
Installation Of Bucket Hinge Pin Bearing Bosses{6119}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Specifications
Master Valve For The Bucket Positioner
955 TRACK-TYPE LOADER HYDRAULIC SYSTEM
Master Valve For The Bucket Positioner<BR> (8J82)
955L LOADER HYDRAULIC SYSTEM
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket
955L VEHICLE SYSTEMS
Bucket Positioner
955L VEHICLE SYSTEMS
Bucket Positioner Master Valve
955L VEHICLE SYSTEMS
Service Magazine
Welding Fixture For Installation Of Bucket Corner Guards Available{0626,6100,6801,6802}
1981/03/30
Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30
Replacement Pin Bosses Available For Loader Bucket{6109}
1983/07/04
Changing Over to New Two-Bolt Corner Guard System{6800,6802,6803}
1993/11/09
Revised Special Instruction, SEHS8433-04, &quot;Repair Of Wheel And Track Loader Lift Arms And Levers&quot; Available {0374,6107,6116,6119}
1998/12/07
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Special Instruction
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the &quot;K Series&quot; Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Welding Fixture For Installation Of Bucket Corner Guards Available{0626,6100,6801,6802}
1981/03/30
Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30
New Tip Pin Retainer Can Be Too Thick To Fit IN Adapter Counterbore{6803}
1979/09/03
Changing Over to New Two-Bolt Corner Guard System{6800,6802,6803}
1993/11/09
Reuse And Salvage Guidelines
Rebuilding Ripper Pin Bores {0599, 0677, 0679, 6310, 6325}
Rebuilding Ripper Pin Bores {0599, 0677, 0679, 6310, 6325}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Hydraulic Swivel {0679, 5060}
Thermal Spray Procedures for Hydraulic Swivel {0679, 5060}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Rebuilding Ripper Pin Bores {0599, 0677, 0679, 6310, 6325}
Rebuilding Ripper Pin Bores {0599, 0677, 0679, 6310, 6325}
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Truck sale:

Caterpillar 955L
 
Caterpillar 955L
- track loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 955L, Construction
19,200 
Caterpillar 955L, Construction
- track loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 955L, Construction
 
Caterpillar 955L, Construction
- track loaders
NMC
Caterpillar 955L, Construction
 
Caterpillar 955L, Construction
- track loaders
FABICK CAT
Caterpillar 955L, Construction
17,000 
Caterpillar 955L, Construction
- track loaders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.