AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D4D TRACTOR 60J00001-03269 (MACHINE) UNDERCARRIAGE Caterpillar SIS



TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 60J
 D4D TRACTOR 60J00001-03269 (MACHINE) UEH0025S D4D 60J   (1968)

Parts group D4D:

  For full view, you need register
UNDERCARRIAGE
ADJUSTMENT GP-HYDRAULIC TRACK
HYDRAULIC TRACK ADJUSTING GROUP
5K-8114 HYDRAULIC TRACK ADJUSTING GROUP
5K8114 HYDRAULIC TRACK ADJUSTING GROUP
Part of 5K208 Track Roller Frame Arrangement shown on Page 96
ADJUSTMENT GP-HYDRAULIC TRACK
1M-7743 ADJUSTMENT GP-HYDRAULIC TRACK
1M7743 HYDRAULIC TRACK ADJUSTING GROUP
IDLER GP
FRONT IDLER
9H-5827 FRONT IDLER
FRONT IDLER (9H5827 N/S) Serial No. 60J1 to 60J1527 inclusive. Note: Quantities shown are those
required for both R.H. and L.H. sides. Refer also to Page 98 for special parts
FRONT IDLER
9H-5827 FRONT IDLER
FRONT IDLER (9H5827 N/S)
Serial No. 60J1528-Up
Note: Quantities shown are those required for both R.H. and L.H. sides
Refer also to Page 98 for special parts
FRONT IDLER GROUP
3K-6634 FRONT IDLER GROUP
3K6634 FRONT IDLER GROUP--24.25" Outside Diameter
FRONT IDLER GROUP
5K-4544 FRONT IDLER GROUP
5K4544 FRONT IDLER GROUP--21.88" Outside Diameter
FOR USE WITH 35 SECTION TRACK GROUP
ROLLER GP
1M-4218 TRACK ROLLER GROUP,TRACK ROLLER GROUP
1M4218 TRACK ROLLER GROUP--Single Flange--4 Required--Type 1
1M4213 TRACK ROLLER GROUP--Double Flange--6 Required--Type 1
Serial No. 60J1 to 60N2506 inclusive
TRACK ROLLER GROUP,TRACK ROLLER GROUP
1M-4213 TRACK ROLLER GROUP,TRACK ROLLER GROUP
1M4218 TRACK ROLLER GROUP--Single Flange--4 Required--Type 1
1M4213 TRACK ROLLER GROUP--Double Flange--6 Required--Type 1
Serial No. 60J1 to 60N2506 inclusive
1M-4218 TRACK ROLLER GROUP,TRACK ROLLER GROUP
1M4218 TRACK ROLLER GROUP--Single Flange--4 Required--Type 2
1M4213 TRACK ROLLER GROUP--Double Flange--6 Required--Type 2
Serial No. 60J1 to 60J2506 inclusive
TRACK ROLLER GROUP,TRACK ROLLER GROUP
1M-4213 TRACK ROLLER GROUP,TRACK ROLLER GROUP
1M4218 TRACK ROLLER GROUP--Single Flange--4 Required--Type 2
1M4213 TRACK ROLLER GROUP--Double Flange--6 Required--Type 2
Serial No. 60J1 to 60J2506 inclusive
ROLLER GP-TRACK SINGLE FLANGE
7K-8095 ROLLER GP-TRACK SINGLE FLANGE
7K8095 TRACK ROLLER GROUP--Single Flange--4 Required
Serial No. 60J2507-Up
ROLLER GP-TRACK DOUBLE FLANGE
7K-8096 ROLLER GP-TRACK DOUBLE FLANGE
7K8096 TRACK ROLLER GROUP--Double Flange--6 Required
Serial No. 60J2507-Up
TRACK CARRIER ROLLER GROUP
3K-7962 TRACK CARRIER ROLLER GROUP
3K7962 TRACK CARRIER ROLLER GROUP--2 Required
Serial No. 60J1 to 60J2002 inclusive
ROLLER GP-TRACK CARRIER
6K-9879 ROLLER GP-TRACK CARRIER
6K9879 TRACK CARRIER ROLLER GROUP--2 Required
Serial No. 60J2003-Up
TRACK ROLLER DIRT GUARD GROUP
1M-6286 TRACK ROLLER DIRT GUARD GROUP
1M6286 TRACK ROLLER DIRT GUARD GROUP
TRACK ROLLER GUIDE GUARD GROUP
5K-7976 TRACK ROLLER GUIDE GUARD GROUP
5K7976 TRACK ROLLER GUIDE GUARD GROUP
Serial No. 60J1 to 60J2440 inclusive
SPRING GP
SPRING GP-EQUALIZER
4K-5207 SPRING GP-EQUALIZER
EQUALIZER SPRING (4K5207 N/S)
Serial No. 60J1 to 60J1766 inclusive
SPRING GP-EQUALIZER
4K-5207 SPRING GP-EQUALIZER
EQUALIZER SPRING (4K5207 N/S)
Serial No. 60J1767-Up
TRACK GP
TRACK GROUP
4K-7105 TRACK GROUP
4K7105 TRACK GROUP--13" Grouser Shoe--2 Required
Serial No. 60J1 to 60J1732 inclusive. Note: To service Pins &
Bushings use 1--4K4081 Pin & Bushing Group, 4--4K3918, 4--4B6166 &
16--5K2707. Refer also to Pages 95 & 99 through 101 for special parts
TRACK GROUPS
TRACK GROUPS-2 Required
Effective with Serial No. 60J1733
TRACK GROUP
4K-7210 TRACK GROUP
4K7210 TRACK GROUP--13" Grouser Shoe--2 Required
Part of 5K208 Track Roller Frame Arrangement shown on
Page 96. Note: 4K4082 Track Pin and Bushing Group is available
TRACK GROUPS
TRACK GROUPS--2 Required
Serial No. 60J1 to 60J1732 inclusive. Note: 4K4076 Track Pin and
Bushing Group, consisting of a complete set of Pins and
Bushings for one Track, is available
TRACK GROUPS
TRACK GROUPS--2 Groups Required
Note: To service Pins and Bushing use 1-4K4081 Pin and
Bushing Group, 6-4K3918, 6-4B6166 and 24-5K2707
TRACK GROUPS
TRACK GROUPS--2 Required
Serial No. 60J1 to 60J1732 inclusive. Note: 4K4080 Track
Pin and Bushing Group, consisting of a complete set of Pins
and Bushings for one Track, is available
TRACK GROUP
7K-2077 TRACK GROUP
7K2077 TRACK GROUP--16" Grouser Shoe--2 Required--Replaced by 2V2278
Serial No. 60J1733-Up. Note: 7K8454 Track Pin & Bushing Group, consisting of a complete
set of Pins & Bushings for one track, is available
TRACK GROUP
2V-2278 TRACK GROUP
2V2278 TRACK GROUP--16" Grouser Shoe--2 Required
Serial No. 60J1733-Up. Note: 3V2712 Track Pin & Bushing Group, consisting of a complete
set of Pins & Bushings for one track, is available
TRACK GROUPS
TRACK GROUPS--2 Required
Effective with Serial No. 60J1733
FOR USE WITH LARGE OUTSIDE DIAMETER FRONT IDLER
STREET PLATES
6B-1102 STREET PLATES
STREET PLATES (6B1102 N/S)
FRAME GP-TRACK ROLLER
FRAME GP-TRACK ROLLER
4K-5210 FRAME GP-TRACK ROLLER
TRACK ROLLER FRAME (4K5210 N/S)
Serial No. 60J1 to 60J1083 inclusive. Note: Quantities shown are those required for both R.H. and L.H. sides
Refer also to Pages 96, 96A, 103, 104, 104B and 104C for special parts
FRAME GP-TRACK ROLLER
4K-5210 FRAME GP-TRACK ROLLER
TRACK ROLLER FRAME (4K5210 N/S)
Serial No. 60J1084 to 60J1584 inclusive. Note: Quantities shown are those required for both R.H. and L.H. sides
Refer also to Pages 96, 96A, 103, 104, 104B and 104C for special parts
FRAME GP-TRACK ROLLER
4K-5210 FRAME GP-TRACK ROLLER
TRACK ROLLER FRAME (4K5210 N/S)
Serial No. 60J1585 to 60J2342 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides
Refer also to Pages 96, 96A, 103, 104, 104B & 104C for special parts
FRAME GP-TRACK ROLLER
4K-5210 FRAME GP-TRACK ROLLER
4K5210 TRACK ROLLER FRAME GROUP
Serial No. 60J2343 to 60J2799 inclusive
Refer also to Pages 96, 96A, 103, 104, 104B and 104C for special parts
FRAME GP-TRACK ROLLER
4K-5210 FRAME GP-TRACK ROLLER
4K5210 TRACK ROLLER FRAME GROUP
Serial No. 60J2800 to 60J3084 inclusive
Refer also to Pages 96, 96A, 103, 104, 104B and 104C for special parts
FRAME GP-TRACK ROLLER
4K-5210 FRAME GP-TRACK ROLLER
4K5210 TRACK ROLLER FRAME GROUP
Serial No. 60J3085-Up
Refer also to Pages 96, 96A, 103, 104, 104B and 104C for special parts
TRACK ROLLER FRAME ARRANGEMENT
5K-0208 TRACK ROLLER FRAME ARRANGEMENT
5K208 TRACK ROLLER FRAME ARRANGEMENT
4K7210 Track and 5K8114 Track Adjusting parts are shown on Pages 95 and 97
TRACK ROLLER FRAME GROUP
3A-2020 TRACK ROLLER FRAME GROUP
3A2020 TRACK ROLLER FRAME GROUP
Serial No. 60J1084 to 60J1584 inclusive
Only separate parts serviced
FRAME GP-TRACK ROLLER
7K-3303 FRAME GP-TRACK ROLLER
7K3303 TRACK ROLLER FRAME GROUP--Factory Installation--Type 1
Serial No. 60J2441-Up
FRAME GP-TRACK ROLLER
7K-3303 FRAME GP-TRACK ROLLER
7K3303 TRACK ROLLER FRAME GROUP--Type 2
Serial No. 60J2441-Up
FRAME GP-TRACK ROLLER
3A-3968 FRAME GP-TRACK ROLLER
3A3968 TRACK ROLLER FRAME GROUP

Information:

(For parts list, see above)

Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Specifications
Equalizer Spring
D4D TRACTOR POWER TRAIN
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Disassembly and Assembly
Equalizer Spring
D4D TRACTOR POWER TRAIN
Service Magazine
Stronger Saddle Assembly Used In Equalizer Spring Group{7204}
1978/01/09
Special Instruction
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Front Idler And Recoil Spring
D4D TRACTOR POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Disassembly and Assembly
Front Idlers
D4D TRACTOR POWER TRAIN
Front Idler Rod Assemblies
D4D TRACTOR POWER TRAIN
Hydraulic Track Adjusters
D4D TRACTOR POWER TRAIN
Recoil Springs
D4D TRACTOR POWER TRAIN
Service Magazine
Use Cork Plugs To Keep Bearing Blocks Clean In Rebuilt Idlers{4159}
1985/06/10
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Best Practices To Reduce Track Idler Flat Spotting {4159, 4170}
2014/11/18
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Undercarriage Reconditioning Bulletin
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Service Magazine
Track Seal Temperature Guidelines {4169, 4170, 4171}
2012/06/07
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Specifications
Track Rollers
D4D TRACTOR POWER TRAIN
Track Carrier Roller
D4D TRACTOR POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Oval Track Roller Disassembly and Assembly Procedures {4180}
Oval Track Roller Disassembly and Assembly Procedures {4180}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Disassembly and Assembly
Track Carrier Rollers
D4D TRACTOR POWER TRAIN
Track Rollers
D4D TRACTOR POWER TRAIN
Service Magazine
Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Special Instruction
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Specifications
Equalizer Spring
D4D TRACTOR POWER TRAIN
Front Idler And Recoil Spring
D4D TRACTOR POWER TRAIN
Disassembly and Assembly
Equalizer Spring
D4D TRACTOR POWER TRAIN
Recoil Springs
D4D TRACTOR POWER TRAIN
Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Stronger Saddle Assembly Used In Equalizer Spring Group{7204}
1978/01/09
Special Instruction
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Specifications
Front Idler And Recoil Spring
D4D TRACTOR POWER TRAIN
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Disassembly and Assembly
Hydraulic Track Adjusters
D4D TRACTOR POWER TRAIN
Recoil Springs
D4D TRACTOR POWER TRAIN
Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Special Instruction
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Technical Information Bulletin
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Specifications
Track Roller Frame
D4D TRACTOR POWER TRAIN
Alignment Of Track Roller Frame
D4D TRACTOR POWER TRAIN
Adjustment Of The Track
D4D TRACTOR POWER TRAIN
Track Rollers
D4D TRACTOR POWER TRAIN
Track Carrier Roller
D4D TRACTOR POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
Undercarriage Reconditioning Bulletin
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Disassembly and Assembly
Track Carrier Rollers
D4D TRACTOR POWER TRAIN
Track Rollers
D4D TRACTOR POWER TRAIN
Tracks
D4D TRACTOR POWER TRAIN
Hydraulic Track Adjusters
D4D TRACTOR POWER TRAIN
Track Roller Frames
D4D TRACTOR POWER TRAIN
Aligment Of Track Roller Frames
D4D TRACTOR POWER TRAIN
Service Magazine
6V4175 Socket Available For Worn Track Bolts{0612,4179}
1981/12/07
Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Track Seal Temperature Guidelines {4169, 4170, 4171}
2012/06/07
Best Practices To Reduce Track Idler Flat Spotting {4159, 4170}
2014/11/18
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}
Tool Operating Manual
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Service Magazine
Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Undercarriage Reconditioning Bulletin
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Tool Operating Manual
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
Service Magazine
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Specifications
Track Roller Frame
D4D TRACTOR POWER TRAIN
Alignment Of Track Roller Frame
D4D TRACTOR POWER TRAIN
Tool Operating Manual
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Disassembly and Assembly
Track Roller Frames
D4D TRACTOR POWER TRAIN
Aligment Of Track Roller Frames
D4D TRACTOR POWER TRAIN
Service Magazine
Oscillation Limit Group Available{7204,7205,7206}
1983/05/30
Stronger Dowel Used In Bearing Cap On The Diagonal Brace Assembly{4151,4191}
1977/11/14
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Tool Operating Manual
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}
Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}
Special Instruction
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Magazine
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Truck sale:

Caterpillar D4D, Construction
14,000 
Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT
CATERPILLAR D4D 1966
 
CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR D4D 1973
 
CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CAT D4D
USD $39,016 
CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia
CAT D4D
USD $18,900 
CAT D4D

DRC Ranch
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.