6A6669 CYLINDER BLOCK ASSEMBLY Serial No. 60J3079 to 60J3091, 60J3093 to 60J3098, 60J3100 to 60J3189 and 60J3191-Up Part of Cylinder Block and Covers shown on Page 18K Note: For Field Replacement order 6A6669 Block Assembly plus 1-2P8783 Hardware Kit D4D

BASIC ENGINE

CYLINDER BLOCK GP

0. 6A-6669 CYLINDER B

CRANKSHAFT GP

1. 7S-5110 CRANKSHAFT
2. CRANKSHAFT

SERVICE EQUIPMENT AND SUPPLIES

GASKET & SEAL KITS

3. GASKET KIT

BASIC ENGINE

FLYWHEEL GP

4. 7S-7878 FLYWHEEL G

BALANCER GP

5. 5S-6425 BALANCER G

FLYWHEEL GP

6. 7S-7878 FLYWHEEL G

PISTON & ROD GP

7. 5S-6429 CONNECTING

CAMSHAFT GP

8. 5S-6428 CAMSHAFT

DRIVE GP-ACCESSORY

9. 5S-8056 ACCESSORY
0. INFORMATION

TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 60J
D4D TRACTOR 60J00001-03269 (MACHINE) UEH0025S D4D 60J (1968)

BASIC ENGINE

CYLINDER BLOCK GP

8S-3201 CYLINDER BLOCK ASSEMBLY

6A-6669 CYLINDER BLOCK AS

#UEH0025S0050

6A-6669: CYLINDER BLOCK AS

CYLINDER BLOCK AS

6A6669 CYLINDER BLOCK ASSEMBLY
Serial No. 60J3079 to 60J3091, 60J3093 to 60J3098, 60J3100 to 60J3189 and 60J3191-Up
Part of Cylinder Block and Covers shown on Page 18K
Note: For Field Replacement order 6A6669 Block Assembly plus 1-2P8783 Hardware Kit

c143401 UEH0025S

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-4046	[2]	BEARING
2.	8B-1312	[2]	DOWEL
3.	5B-7652	[2]	DOWEL
4.	4B-5387	[3]	PLUG
5.	5M-6213	[1]	PLUG
6.	8B-6349	[2]	DOWEL
7.	5S-8462	[1]	STUD
8.	9M-5477	[1]	BEARING
9.	1P-2717	[5]	CAP
10.	7S-3224	[10]	BOLT
11.	2S-5658	[10]	WASHER
12.	5S-6420	[2]	BEARING
13.	4B-9782	[5]	BALL
14.	5S-6419	[4]	BEARING
15.	2A-3798	[2]	DOWEL

#UEH0025S0051

7S-5110: CRANKSHAFT GROUP

CRANKSHAFT GROUP

7S5110 CRANKSHAFT GROUP

c161412 UEH0025S

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
7S-3103	[1]	SEAL
		-OR-
7S-9736 C	[1]	SEAL ASSEM.
		(For Worn Journal)
2P-0716 C	[2]	PLATE
9F-2247	[4]	PLUG
		(Part of Crankshaft Assem. 5S5252)
3S-9730	[5]	BEARING
5S-5252	[1]	CRANKSHAFT ASSEM.
6B-5310	[1]	BOLT
5S-9948	[1]	WASHER
5S-9021	[1]	SEAL
4M-9933	[1]	GEAR (40 TEETH)
5H-2671	[1]	KEY
		(PARTS OF CRANKSHAFT ASSEM. 5S5252)
5S-8038	[1]	PULLEY
C		INDICATES CHANGE

#UEH0025S0052

CRANKSHAFT BEARING REPLACEMENT GROUPS

UEH0025S0052 UEH0025S

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
		(Complete set of Bearing Assemblies as SHOWN WITH STANDARD CRANKSHAFT
4S-8881	[5]	BEARING
2P-0716	[2]	PLATE
4S-8883	[5]	BEARING
2P-0716	[2]	PLATE
4S-8885	[5]	BEARING
2P-0716	[2]	PLATE

#UEH0025S0053

GASKET KITS

UEH0025S0053 UEH0025S

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	8S-9686		DIESEL ENGINE BASIC
	8S-9688		DIESEL ENGINE SUPPLEMENTARY
	8S-9697		VALVE GRINDING
	8S-7057		WATER PUMP

#UEH0025S0054

7S-7878: FLYWHEEL GP

FLYWHEEL GP

FLYWHEEL (7S7878 N/S)
Serial No. 60J1 to 60J2951, 60J2971 and 60J3099 inclusive

c105733 UEH0025S

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1565	[9]	BOLT
2.	1M-7341	[1]	LOCK
3.	8S-8193	[1]	FLYWHEEL ASSEM.
4.	2S-7037	[1]	GEAR (156 Teeth)
			(Part of 8S8193 Flywheel Assem.)

#UEH0025S0055

5S-6425: BALANCER GP

BALANCER GP

5S6425 BALANCER GROUP

c220041 UEH0025S

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1N-8354	[2]	LOCK
2.	4S-6417	[2]	PLATE
3.	4N-7978 C	[1]	SHAFT ASSEM. (L.H. 20 teeth)
4.	4N-7977 C	[1]	SHAFT ASSEM. (R.H. 20teeth)
5.	0S-1594	[4]	BOLT
	C		INDICATES CHANGE

#UEH0025S0056

7S-7878: FLYWHEEL GP

FLYWHEEL GP

7S7878 FLYWHEEL GROUP
Serial No. 60J2952 to 60J2970, 60J2972 to 60J3098 and 60J3100-Up

c134027 UEH0025S

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1565	[9]	BOLT
2.	8S-8193	[1]	FLYWHEEL ASSEM.
3.	2S-7037	[1]	GEAR (156 Teeth)

#UEH0025S0057

5S-6429: CONNECTING ROD AND PISTON

CONNECTING ROD AND PISTON

CONNECTING ROD AND PISTON (5S6429 N/S)--4 Required

c203943 UEH0025S

5S6429 CONNECTING ROD AND PISTON Parts scheme

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-4029 C	[1]	PISTON ASSEM.
2.	7S-8378	[1]	RING (Top)
3.	5S-6750	[1]	RING (Intermediate)
4.	9S-7788	[1]	RING (Oil)
5.	7M-7821	[1]	BEARING (Standard)
	2S-0502	[1]	BEARING (.010" Undersize)
	2S-0503	[1]	BEARING (.020" Undersize)
	7M-7826	[1]	BEARING (.030" Undersize)
6.	5S-6360	[1]	ROD ASSEM.
	7S-9347	[1]	BEARING
7.	1P-9956 C	[2]	BOLT
8.	5S-6348	[2]	NUT
9.	9H-4016	[1]	PIN
10.	9H-4015	[2]	RETAINER
	7S-9404	[1]	RING GROUP
			(Consists of Complete set of Rings FOR ONE PISTON)
	C		INDICATES CHANGE

#UEH0025S0058

5S-6428: CAMSHAFT

CAMSHAFT

CAMSHAFT (5S6428 N/S)

c102416 UEH0025S

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5S-3971	[1]	CAMSHAFT
2.	0S-0509	[2]	BOLT
3.	8S-1491	[1]	LOCK
4.	5S-3804	[1]	GEAR (80 Teeth)
5.	0S-1748	[4]	BOLT
6.	8S-2630	[1]	LOCK
7.	7S-2204	[1]	WASHER

#UEH0025S0059

5S-8056: ACCESSORY DRIVE AND PRIMARY FUEL FILTER

ACCESSORY DRIVE AND PRIMARY FUEL FILTER

ACCESSORY DRIVE AND PRIMARY FUEL FILTER (5S8056 N/S)

c110976 UEH0025S

5S8056 ACCESSORY DRIVE AND PRIMARY FUEL FILTER Parts scheme

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1618	[3]	BOLT
2.	3B-4505	[7]	LOCKWASHER
3.	9L-2796	[1]	BOLT
4.	8H-9220	[1]	GASKET
5.	8H-9787	[1]	COVER
6.	8H-9788	[1]	GASKET
7.	1A-9136	[2]	BOLT
8.	7S-5045	[1]	HOUSING ASSEM.
9.	2A-3348	[1]	DOWEL
10.	5M-6214	[2]	PLUG
11.	9F-2247	[1]	DOWEL
12.	2H-1190	[2]	DOWEL
			(Parts of 7S5045 Assem.)
13.	4D-0322	[1]	BAIL ASSEM.
14.	7S-5047	[1]	SHAFT
15.	8H-9789	[1]	BEARING
16.	5S-7614	[1]	GEAR (80 Teeth)
17.	8H-9718	[1]	RETAINER
18.	5S-3828	[1]	SLEEVE
19.	9S-1313	[1]	NUT
20.	7S-9847	[1]	WASHER
21.	0S-1594	[4]	BOLT
22.	7M-9763	[2]	LOCK
23.	8H-9364	[1]	GASKET
24.	0L-1351	[2]	BOLT
25.	5S-7611	[1]	LOCK
26.	5B-9079	[1]	NUT
27.	2H-3755	[2]	BOLT
28.	2F-6156	[1]	LOCK
29.	5S-7612	[1]	PLATE
30.	5S-7660	[1]	GEAR ASSEM. (57 Teeth)
31.	5S-7630	[1]	BEARING
			(Part of 5S7660 Gear Assem.)
32.	5S-7608	[1]	SHAFT
33.	9H-2769	[1]	BOWL
34.	5S-7645	[1]	ELEMENT ASSEM.
35.	9H-2770	[1]	GASKET
36.	1B-9575	[2]	BOLT

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Special Instruction

Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}

Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}

Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}

Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Specifications

Cylinder Block
3304 VEHICULAR ENGINE

Cylinder Liner
3304 VEHICULAR ENGINE

Cylinder Liner Projection
3304 VEHICULAR ENGINE

Bearing Surface (Journal) For Main Bearings
3304 VEHICULAR ENGINE

Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE

Tool Operating Manual

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}

Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Disassembly and Assembly

Cylinder Liners
D4 TRACTOR ENGINE

Crankshaft Main Bearings
D4 TRACTOR ENGINE

Camshaft Bearings
D4 TRACTOR ENGINE

Balancer Shaft Bearings
D4 TRACTOR ENGINE

Service Magazine

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

New Information On Reusable Cylinder Liners{1216}
1978/06/19

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11

Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Pin Bore Is Now Offset (Not In The Center) .059" (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75" Bore Cylinder Blocks{1201,1216,1217}
1990/11/19

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20

Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines {1210,1211}
1999/01/18

Caterpillar Parts SIS Catalog D4D :

8S-3201 CYLINDER BLOCK ASSEMBLY

7S-1236 CYLINDER BLOCK AND COVERS

7S-5110 CRANKSHAFT GROUP

CRANKSHAFT BEARING REPLACEMENT GROUPS

5S-6429 CONNECTING ROD AND PISTON

5S-6428 CAMSHAFT

Truck sale:

14,000

Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT

CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

USD $39,016

CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia

USD $18,900

CAT D4D

DRC Ranch