AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4K6037 LOW SPEED GEAR GROUP Note: This Group provides the following speeds: (Forward) First--1.8, Second--2.4, Third--3.0, Fourth--3.4 and Fifth--4.4 M.P.H.; (Reverse) First--2.2, Second--2.9, Third--3.5, Fourth--4.0 and Fifth--5.2 M.P.H. D4D


POWER TRAIN
TRANSMISSION GP
UNDERCARRIAGE
TRACK GP
FRAME GP-TRACK ROLLER
ADJUSTMENT GP-HYDRAULIC TRACK
IDLER GP
TRACK GP

TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 60J
 D4D TRACTOR 60J00001-03269 (MACHINE) UEH0025S D4D 60J   (1968)

POWER TRAIN

TRANSMISSION GP
TRANSMISSION GROUP
4K-5035 TRANSMISSION GROUP
4K-5035 TRANSMISSION GROUP
TRANSMISSION GROUP
4K-5035 TRANSMISSION GROUP
4K-5035 TRANSMISSION GROUP
TRANSMISSION CASE AND COVERS
4K-5032 TRANSMISSION CASE AND COVERS
LOW SPEED GEAR GROUP
4K-6037 LOW SPEED GEAR GROUP
GEAR GP-LOW SPEED
5K-8017 GEAR GP-LOW SPEED
 

#UEH0025S0280
 

4K-6037: LOW SPEED GEAR GROUP

4K6037 LOW SPEED GEAR GROUP
Note: This Group provides the following speeds: (Forward) First--1.8,
Second--2.4, Third--3.0, Fourth--3.4 and Fifth--4.4 M.P.H.; (Reverse)
First--2.2, Second--2.9, Third--3.5, Fourth--4.0 and Fifth--5.2 M.P.H.
c72441 UEH0025S
4K6037 LOW SPEED GEAR GROUP Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5M-2477 [1] PLATE (NUMBER)  
    (NOT SHOWN-MOUNTED ON REAR OF STEERING CLUTCH CASE)
  4K-6038 [1] GEAR (21 TEETH)  
  1K-7978 [1] GEAR (36 AND 40 TEETH)  
  1K-7973 [1] GEAR (28 TEETH)  
  1K-7962 [1] GEAR (30 AND 34 TEETH)  
  1K-7977 [1] GEAR (27 TEETH)  
  1K-7974 [1] GEAR (31 AND 33 TEETH)  
 

#UEH0025S0281
 

5K-8017: GEAR GP-LOW SPEED

5K8017 LOW SPEED GEAR GROUP
Note: This Group provides the following speeds: (Forward) First--1.5,
Second--2.0, Third--3.0, Fourth--3.4 & Fifth--4.4 M.P.H.; (Reverse) First--1.7,
Second--2.3, Third--3.5, Fourth--4.0 & Fifth--5.1 M.P.H.
c95412 UEH0025S
5K8017 GEAR GP-LOW SPEED Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5K-8004 [1] PLATE (NUMBER)  
    (NOT SHOWN-MOUNTED ON REAR OF STEERING CLUTCH CASE)
  1M-1695 [1] GEAR (22 TEETH)  
  4K-5781 [1] GEAR (18 TEETH)  
  1M-1694 [1] GEAR (39 AND 43 TEETH)  
  1K-7973 [1] GEAR (28 TEETH)  
  1K-7962 [1] GEAR (30 AND 34 TEETH)  
  1K-7977 [1] GEAR (27 TEETH)  
  1K-7974 [1] GEAR (31 AND 33 TEETH)  
 

#UEH0025S0282
 

4K-7210: TRACK GROUP

4K7210 TRACK GROUP--13" Grouser Shoe--2 Required
Part of 5K208 Track Roller Frame Arrangement shown on
Page 96. Note: 4K4082 Track Pin and Bushing Group is available
c927328 UEH0025S
4K7210 TRACK GROUP Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-7144 [1] LINK ASSEM.  
  4K-3918 [36] BUSHING  
  4B-6166 [36] PIN  
  5K-9458 [36] LINK (L.H.)  
  5K-9460 [1] LINK (Master L.H.)  
  4M-0740 [1] BUSHING (Master)  
  5K-9457 [36] LINK (R.H.)  
  4K-3916 [2] SPACER  
  5K-2707 [148] SEAL WASHER  
  5K-9459 [1] LINK (Master R.H.)  
  4K-3919 [1] PIN (Master)  
  4K-7038 [148] BOLT  
  7H-3606 [148] NUT  
  4K-7052 [37] SHOE  
    NOTE - WHEN COMPLETE REPLACEMENT OF MASTER PIN IS REQUIRED YOU MAY ORDER MASTER PIN & SPACER GROUP
  4K-4078 WHICH CONSISTS OF  
  4K-3919 [1] PIN (Master)  
  4K-3916 [2] SPACER  
  5K-2707 [4] SEAL WASHER  
 

#UEH0025S0283
 

5K-0208: TRACK ROLLER FRAME ARRANGEMENT

5K208 TRACK ROLLER FRAME ARRANGEMENT
4K7210 Track and 5K8114 Track Adjusting parts are shown on Pages 95 and 97
c102734 UEH0025S
5K0208 TRACK ROLLER FRAME ARRANGEMENT Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5K-1723 [4] PLATE  
    (2 IN EACH FRAME ASSEM. 1K9103 AND 1K9104)
  4K-8922 [8] ANGLE  
    (4 IN EACH FRAME ASSEM. 1K9103 AND 1K9104)
  4K-3633 [1] BEARING  
    (PART OF BRACE ASSEM. 4K3629)
  4K-3634 [1] BEARING  
    (PART OF BRACE ASSEM. 4K3630)
  3B-2483 [2] DOWEL  
    (1 IN EACH FRAME ASSEM. 1K9103 AND 1K9104)
  [1] BRACE ASSEM.  
    (PART OF FRAME ASSEM. 1K9103)
  4K-3630 [1] BRACE ASSEM.  
    (PART OF FRAME ASSEM. 1K9104)
  4K-7210 Y [2] TRACK GROUP  
    (SEE SEPARATE ILLUSTRATION)
  5K-8114 Y [1] TRACK ADJUSTING GROUP  
    (SEE SEPARATE ILLUSTRATION)
  3K-8171 [2] STOP (R.H.)  
  3K-8172 [2] STOP (L.H.)  
  5K-8037 [1] GUARD ASSEM. (R.H.)  
  5K-8038 [1] GUARD ASSEM. (L.H.)  
  3K-5068 [2] DOWEL  
  2B-7557 [2] CORK  
  4F-4879 [4] BOLT  
  9F-2978 [4] NUT  
    (2 IN EACH GUARD ASSEM. 5K8037 AND 5K8038)
  3B-4506 [4] LOCKWASHER  
  5K-8036 [2] COVER  
  5K-0200 [1] SUPPORT ASSEM.  
  1D-4585 [2] BOLT  
  3B-4510 [2] LOCKWASHER  
  9M-3424 [2] SPACER  
  1B-4367 [6] BOLT  
  1D-4720 [6] NUT  
  3B-4510 [6] LOCKWASHER  
  1A-8063 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  2A-1538 [16] BOLT  
  3B-4512 [16] LOCKWASHER  
  2F-7857 [8] PLATE  
  1F-8952 [8] SHIM (.0299" THICK)  
  1F-8953 [8] SHIM (.0598" THICK)  
  1K-9103 [1] FRAME ASSEM. (R.H.)  
  1K-9104 [1] FRAME ASSEM. (L.H.)  
  3K-8167 [1] GUARD (R.H.)  
  3K-8168 [1] GUARD (L.H.)  
  4K-4780 [4] STRIP ASSEM.  
    (2 IN EACH FRAME ASSEM. 1K9103 AND 1K9104)
  1M-8867 [2] IDLER ASSEM.  
  3K-8186 [4] PLATE  
    (2 IN EACH FRAME ASSEM. 1K9103 AND 1K9104)
  2S-5927 [2] PLATE (WARNING)  
  7B-3028 [8] SCREW  
  Y   SEPARATE ILLUSTRATION
 

#UEH0025S0284
 

3A-2020: TRACK ROLLER FRAME GROUP

3A2020 TRACK ROLLER FRAME GROUP
Serial No. 60J1084 to 60J1584 inclusive
Only separate parts serviced
c111618 UEH0025S
3A2020 TRACK ROLLER FRAME GROUP Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1A-1135 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  4K-3628 [2] CAP ASSEM.  
  3B-2484 [2] DOWEL  
    (1 in each Assem. 4K3628)
  4B-8629 [4] BEARING  
  3A-1010 [1] BRACE (R.H.)  
    (Part of 7K1575 Assem.)
  3A-1011 [1] BRACE (L.H.)  
    (Part of 7K1576 Assem.)
  [2] DOWEL  
    (1 in each 7K1575 & 7K1576 ASSEM.)
  1A-5405 [4] BOLT  
  9H-1024 [4] WASHER  
  6J-1019 [2] PLATE  
  3B-8487 [2] FITTING  
  1D-4586 [4] BOLT  
  9H-1024 [4] WASHER  
  7K-1575 [1] FRAME ASSEM. (R. H.)  
  7K-1576 [1] FRAME ASSEM. (L. H.)  
  1A-1460 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  1M-9476 [2] BRACKET  
  4B-4043 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  4B-5440 [12] SCREW PLATE  
    (6 in each 7k1575 & 7K1576 ASSEM.)
  5K-1904 [2] SUPPORT ASSEM.  
    (1 in each 7K1575 & 7K1576 ASSEM.)
  7K-1294 [4] STRIP ASSEM.  
    (2 in each 7K1575 & 7K1576 ASSEM.)
  2B-7558 [34] CORK  
 

#UEH0025S0285
 

5K-8114: HYDRAULIC TRACK ADJUSTING GROUP

5K8114 HYDRAULIC TRACK ADJUSTING GROUP
Part of 5K208 Track Roller Frame Arrangement shown on Page 96
c101407 UEH0025S
5K8114 HYDRAULIC TRACK ADJUSTING GROUP Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  [2] SEAL  
  [2] PILOT ASSEM.  
  [2] CYLINDER  
  [2] BOLT  
  [4] RING  
  [2] PISTON  
  [2] RING  
  [2] VALVE  
  [2] VALVE  
  [4] WASHER  
  [2] PLATE (WARNING)  
  [8] SCREW  
  [2] WASHER  
  [2] ROD ASSEM.  
  [2] RING  
  [2] SEAL  
  [8] BOLT  
  [8] WASHER  
  [2] SEAL  
 

#UEH0025S0286
 

1M-7743: ADJUSTMENT GP-HYDRAULIC TRACK

1M7743 HYDRAULIC TRACK ADJUSTING GROUP
c163111 UEH0025S
1M7743 ADJUSTMENT GP-HYDRAULIC TRACK Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2S-5926 [2] VALVE  
  2S-5925 [2] VALVE  
  5M-6708 [4] WASHER  
  5F-3092 [2] RING  
  2V-7198 C [2] PILOT ASSEM.  
  8M-6676 [2] CYLINDER  
  6H-7759 [2] BOLT (coarse thread)  
    -OR-
  9K-5446 C [2] BOLT (fine thread)  
  1B-4334 C [2] NUT  
  7H-2423 [4] RING  
  9H-7670 [2] PISTON  
  9H-7668 [2] RING  
  2S-5927 [1] PLATE  
    (warning)
  7B-3028 [4] SCREW  
    (Parts of 8K5589 Group)
  1S-5242 [2] PLATE  
    (WARNING AND INSTRUCTION)
  7B-3028 C [8] SCREW  
  6F-7048 [2] WASHER  
  8K-5589 C [2] ROD GROUP  
  4M-7022 [2] RING  
  4M-7021 [2] SEAL  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  2S-5867 [2] SEAL  
  C   INDICATES CHANGE
 

#UEH0025S0287
 

3K-6634: FRONT IDLER GROUP

3K6634 FRONT IDLER GROUP--24.25" Outside Diameter
c60855 UEH0025S
3K6634 FRONT IDLER GROUP Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8B-5144 [8] BOLT  
  4B-8649 [4] SPACER  
  1M-8867 [2] IDLER ASSEM.  
 

#UEH0025S0288
 

5K-4544: FRONT IDLER GROUP

5K4544 FRONT IDLER GROUP--21.88" Outside Diameter
FOR USE WITH 35 SECTION TRACK GROUP
c91442 UEH0025S
5K4544 FRONT IDLER GROUP Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3K-2866 [2] IDLER ASSEM.  
 

#UEH0025S0289
 

TRACK GROUPS

TRACK GROUPS--2 Required
Serial No. 60J1 to 60J1732 inclusive. Note: 4K4076 Track Pin and
Bushing Group, consisting of a complete set of Pins and
Bushings for one Track, is available
c927329 UEH0025S
None TRACK GROUPS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-7080 [1] LINK ASSEM.  
    CONSISTS OF PARTS MARKED h
  4B-6166 H [34] PIN  
  5K-2707 H [140] SEALWASHER  
  5K-9460 H [1] MASTER LINK  
    (LH)
  4K-3919 H [1] MASTER PIN  
  4K-3916 H [2] SPACER  
  5K-9458 H [34] LINK (LH)  
  5K-9457 H [34] LINK (RH)  
  4K-3918 H [34] BUSHING  
  5K-9459 H [1] MASTER LINK  
    (RH)
  4M-0740 H MASTER BUSHING[[1  
  4K-3919 [1] PIN (MASTER)  
  4K-3916 [2] SPACER  
  4K-3917 [4] SEALWASHER  
 

Information:

Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Specifications
Transmission<BR> (Power Shift)
D4D TRACTOR POWER TRAIN
Transmission<BR> (Direct Drive)
D4D TRACTOR POWER TRAIN
Transmission Oil Pump<BR> (Power Shift) (4S8660)
D4D TRACTOR POWER TRAIN
Transmission Filter<BR> (Power Shift) (4S8679)
D4D TRACTOR POWER TRAIN
Hydraulic Controls For The Transmission<BR> (Power Shift)
D4D TRACTOR POWER TRAIN
Engine Mounting Bolts
3304 VEHICULAR ENGINE
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission Oil Cooler
D4 TRACTOR ENGINE
Transmission Oil Filter (Power Shift)
D4D TRACTOR POWER TRAIN
Transmission Oil Pump (Power Shift)
D4D TRACTOR POWER TRAIN
Transmission (Direct Drive &amp; Special Application)
D4D TRACTOR POWER TRAIN
Transmission Hydraulic Controls (Power Shift)
D4D TRACTOR POWER TRAIN
Torque Converter, Transmission And Transfer Gears (Power Shift)
D4D TRACTOR POWER TRAIN
Service Magazine
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
New Engine Mount Keeps Forces Caused From Engine Side-To-Side Movement Away From The Frame Of The Vehicle{1152}
1977/03/21
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog D4D :

6K-7839 LIGHTING SYSTEM
LIGHTING SYSTEM
6K-7839 LIGHTING SYSTEM
6K-7839 LIGHTING SYSTEM
LIGHTING SYSTEM
6K-7839 LIGHTING SYSTEM
6K-8800 LIGHTING SYSTEM
LIGHTING SYSTEM
6K-8800 LIGHTING SYSTEM
6K-8800 LIGHTING SYSTEM
LIGHTING SYSTEM
6K-8800 LIGHTING SYSTEM
GEAR GP-LOW SPEED
5K-8017 GEAR GP-LOW SPEED
TRACK GROUP
4K-7210 TRACK GROUP
TRACK ROLLER FRAME ARRANGEMENT
5K-0208 TRACK ROLLER FRAME ARRANGEMENT
TRACK ROLLER FRAME GROUP
3A-2020 TRACK ROLLER FRAME GROUP
HYDRAULIC TRACK ADJUSTING GROUP
5K-8114 HYDRAULIC TRACK ADJUSTING GROUP
ADJUSTMENT GP-HYDRAULIC TRACK
1M-7743 ADJUSTMENT GP-HYDRAULIC TRACK
FRONT IDLER GROUP
3K-6634 FRONT IDLER GROUP
FRONT IDLER GROUP
5K-4544 FRONT IDLER GROUP

Truck sale:

Caterpillar D4D, Construction
14,000 
Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT
CATERPILLAR D4D 1966
 
CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR D4D 1973
 
CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CAT D4D
USD $39,016 
CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia
CAT D4D
USD $18,900 
CAT D4D

DRC Ranch
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.