AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS (7S1228 N/S)--Front View-Part 2 of 2 Serial No. 59J1071 to 1075, 1077 to 1081, 1083 to 1102, 1104 to 1160 and 59J1162 inclusive Refer also to Page 102 for special parts D4D


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP

TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 59J
 D4D TRACTOR 59J00001-01280 (MACHINE) UEH0036S D4D 59J   (1968)

BASIC ENGINE

CYLINDER BLOCK GP
7S-1228 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
 

#UEH0036S0040
 

7S-1228: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1228 N/S)--Front View-Part 2 of 2
Serial No. 59J1071 to 1075, 1077 to 1081, 1083 to 1102, 1104 to 1160 and 59J1162 inclusive
Refer also to Page 102 for special parts
c138355 UEH0036S
7S1228 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-0633 [1] SUPPORT ASSEM.  
2. 7S-1234 [1] BUSHING ASSEM.  
3. 0L-1143 [9] BOLT  
4. 3B-4506 [27] LOCKWASHER  
5. 0S-1594 [8] BOLT  
6. 9S-3187 [1] LOCK  
7. 9H-4891 [1] GASKET  
8. 1B-4203 [6] NUT  
9. 2N-2753 C [1] COVER  
10. 1C-2251 [2] BOLT  
11. 9S-8991 C [1] COVER ASSEM.  
12. 0T-0101 [4] STUD  
13. 8S-6814 [2] DOWEL  
14. 3B-2460 [1] STUD  
15. 5S-8055 [1] GASKET  
16. 1A-2029 [3] BOLT (1.125" long)  
17. 5S-8092 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 5S-8115 [1] GAUGE ASSEM.  
19. 5S-7134 [1] GASKET  
20. 7S-1803 [1] CAP ASSEM.  
21. 9S-1796 [1] TUBE ASSEM.  
22. 9S-3188 [1] LOCK  
23. 4M-4419 [1] LOCK  
24. 0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
25. 8S-1326 [1] FITTING  
  8F-8998 [1] NUT  
26. 0L-1352 [2] BOLT  
27. 7S-9415 [1] PLUG  
28. 1A-5964 [5] BOLT  
29. 1A-1460 [11] BOLT  
30. 5M-9131 [1] LOCK  
31. 5M-9134 [1] LOCK  
32. 2B-0947 [2] BOLT  
33. 5M-9135 [1] LOCK  
34. 5M-9132 [1] LOCK  
35. 5M-9136 [1] LOCK  
36. 8S-6018 [1] PAN  
  C   INDICATES CHANGE
 

#UEH0036S0041
 

7S-1228: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1228 N/S)--Side View-Part 1 of 2
Serial No. 59J1103 and 59J1164 inclusive. Cylinder Block parts are shown on Page 22A. See Page 24 for Gasket
Kits. Note: 8S4635 Piston & Liner Group, consisting of: 1--Piston Assembly, 1--Liner & 2--Seal, is available
c139930 UEH0036S
7S1228 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-6557 [4] LINER  
2. 5S-6670 [8] SEAL  
3. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
4. 7M-4593 [4] PLUG  
5. 0L-1351 [14] BOLT  
6. 3B-4506 [39] LOCKWASHER  
7. 5M-1903 [1] COVER  
8. 4M-2250 [1] GASKET  
9. 0S-1594 [8] BOLT  
10. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
11. 5M-6214 [1] PLUG  
12. 5S-7135 [1] GASKET  
13. 5B-8030 [1] SPACER  
14. 9H-5921 [1] GASKET  
15. 3J-5389 [2] PLUG  
16. Y [1] BLOCK ASSEM.  
    (Separate Illustration)
17. 0S-1591 [12] BOLT  
18. 8S-1963 [1] GASKET  
19. 9H-6067 [1] SEAL  
20. 8S-0499 [1] TUBE ASSEM.  
21. 2A-4639 [5] BOLT  
22. 8S-1959 [1] PLATE ASSEM.  
23. 5S-6045 [1] GASKET  
24. [1] BOLT  
  0L-0364 [1] LOCK  
25. 6B-7948 [1] PLUG  
  0L-1124 [1] GASKET  
26. 3B-4627 [1] COTTER PIN  
27. 1A-8537 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
28. 7S-1052 C [2] BLOCK  
29. 5M-6213 [4] PLUG  
30. 5S-8030 [1] HOUSING (Flywheel)  
31. 6A-3243 [1] TUBE  
32. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEH0036S0042
 

7S-1228: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1228 N/S)--Front View-Part 2 of 2
Serial No. 59J1103 and 59J1164 inclusive
Refer also to Page 102 for special parts
c138355 UEH0036S
7S1228 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-0633 [1] SUPPORT ASSEM.  
2. 7S-1234 [1] BUSHING ASSEM.  
3. 0L-1143 [9] BOLT  
4. 3B-4506 [27] LOCKWASHER  
5. 0S-1594 [8] BOLT  
6. 9S-3187 [1] LOCK  
7. 9H-4891 [1] GASKET  
8. 1B-4203 [6] NUT  
9. 2N-2753 C [1] COVER  
10. 1C-2251 [2] BOLT  
11. 9S-8991 C [1] COVER ASSEM.  
12. 0T-0101 [4] STUD  
13. 8S-6814 [2] DOWEL  
14. 3B-2460 [1] STUD  
15. 5S-8055 [1] GASKET  
16. 1A-2029 [3] BOLT (1.125" long)  
17. 5S-8092 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 5S-8115 [1] GAUGE ASSEM.  
19. 5S-7134 [1] GASKET  
20. 7S-1803 [1] CAP ASSEM.  
21. 9S-1796 [1] TUBE ASSEM.  
22. 9S-3188 [1] LOCK  
23. 4M-4419 [1] LOCK  
24. 0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
25. 8S-1326 [1] FITTING  
  8F-8998 [1] NUT  
26. 0L-1352 [2] BOLT  
27. 7S-9415 [1] PLUG  
28. 1A-5964 [5] BOLT  
29. 1A-1460 [11] BOLT  
30. 5M-9131 [1] LOCK  
31. 5M-9134 [1] LOCK  
32. 2B-0947 [2] BOLT  
33. 5M-9135 [1] LOCK  
34. 5M-9132 [1] LOCK  
35. 5M-9136 [1] LOCK  
36. 8S-6018 [1] PAN  
  C   INDICATES CHANGE
 

#UEH0036S0043
 

7S-1228: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1228 N/S)--Side View-Part 1 of 2
Serial No. 59J1163 and 59J1165-Up. 6A6669 Cylinder Block parts are shown on Page 22B
See Page 24 for Gasket Kits
c143408 UEH0036S
7S1228 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-8889 C [4] LINER  
2. 5S-6670 C [12] SEAL  
3. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
4. 7M-4593 [4] PLUG  
5. 0L-1351 [14] BOLT  
6. 3B-4506 [39] LOCKWASHER  
7. 5M-1903 [1] COVER  
8. 4M-2250 [1] GASKET  
9. 0S-1594 [8] BOLT  
10. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
11. 5M-6214 [1] PLUG  
12. 5S-7135 [1] GASKET  
13. 5B-8030 [1] SPACER  
14. 9H-5921 [1] GASKET  
15. 3J-5389 [2] PLUG  
16. 6A-6669 YC [1] BLOCK ASSEM.  
    (Separate Illustration)
17. 0S-1591 [12] BOLT  
18. 8S-1963 [1] GASKET  
19. 9H-6067 [1] SEAL  
20. 8S-0499 [1] TUBE ASSEM.  
21. 2A-4639 [5] BOLT  
22. 8S-1959 [1] PLATE ASSEM.  
23. 5S-6045 [1] GASKET  
24. [1] BOLT  
  0L-0364 [1] LOCK  
25. 6B-7948 [1] PLUG  
  0L-1124 [1] GASKET  
26. 3B-4627 [1] COTTER PIN  
27. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
28. 6A-3243 [1] TUBE  
29. 5M-6213 [4] PLUG  
30. 5S-8030 [1] HOUSING (Flywheel)  
31. 7S-1052 [2] BLOCK  
32. 1A-8537 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEH0036S0044
 

7S-1228: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1228 N/S)--Front View-Part 2 of 2
Serial No. 59J1163 and 59J1165-Up
Refer also to Page 102 for special parts
c143409 UEH0036S
7S1228 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-0633 [1] SUPPORT ASSEM.  
2. 7S-1234 [1] BUSHING ASSEM.  
3. 0L-1143 [9] BOLT  
4. 3B-4506 [27] LOCKWASHER  
5. 0S-1594 [8] BOLT  
6. 9S-3187 [1] LOCK  
7. 9H-4891 [1] GASKET  
8. 1B-4203 [6] NUT  
9. 2N-2753 [1] COVER  
10. 1C-2251 [2] BOLT  
11. 9S-8991 [1] COVER ASSEM.  
12. 0T-0101 [4] STUD  
13. 8S-6814 [2] DOWEL  
14. 3B-2460 [1] STUD  
15. 5S-8055 [1] GASKET  
16. 1A-2029 [3] BOLT (1.125" long)  
17. 5S-8092 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 5S-8115 [1] GAUGE ASSEM.  
19. 5S-7134 [1] GASKET  
20. 7S-1803 [1] CAP ASSEM.  
21. 9S-1796 [1] TUBE ASSEM.  
22. 9S-3188 [1] LOCK  
23. 4M-4419 [1] LOCK  
24. 0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
25. 8S-1326 [1] FITTING  
  8F-8998 [1] NUT  
26. 0L-1352 [2] BOLT  
27. 4B-7739 C [1] PLUG  
28. 1A-5964 [5] BOLT  
29. 1A-1460 [11] BOLT  
30. 5M-9131 [1] LOCK  
31. 5M-9134 [1] LOCK  
32. 2B-0947 [2] BOLT  
33. 5M-9135 [1] LOCK  
34. 5M-9132 [1] LOCK  
35. 5M-9136 [1] LOCK  
36. 8S-6018 [1] PAN  
  C   INDICATES CHANGE
 

#UEH0036S0045
 

8S-3201: CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY (8S3201 N/S)
Serial No. 59J1 to 59J992 inclusive
Part of Cylinder Block and Covers shown on Pages 20, 20B and 20D
Note: For Field Replacement order 8S3711 Service Block Assembly
c106653 UEH0036S
8S3201 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [2] BEARING  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 3S-8313 [2] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 8S-4676 [5] CAP GROUP  
  8S-4674 [10] SHIM (Long)  
    (2 in each 8S4676 Cap Group)
  8S-4673 [30] SHIM (Short)  
    (6 in each 8S4676 Cap Group)
10. 7S-3224 [10] BOLT  
11. 2S-5658 [10] WASHER  
12. 5S-6420 [2] BEARING  
13. 4B-9782 [5] BALL  
14. 5S-6419 [4] BEARING  
 

#UEH0036S0046
 

8S-3201: CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY (8S3201 N/S)
Serial No. 59J993 to 59J1162 and 59J1164 inclusive. Part of Cylinder Block and Covers shown on Pages
20D, 20F and 20H. Note: For Field Replacement order 8S3711 Service Block Assembly
c138918 UEH0036S
8S3201 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [2] BEARING  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 3S-8313 [2] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 1P-2717 C [5] CAP  
10. 7S-3224 [10] BOLT  
11. 2S-5658 [10] WASHER  
12. 5S-6420 [2] BEARING  
13. 4B-9782 [5] BALL  
14. 5S-6419 [4] BEARING  
  C   INDICATES CHANGE
 

#UEH0036S0047
 

6A-6669: CYLINDER BLOCK AS

6A6669 CYLINDER BLOCK ASSEMBLY
Serial No. 59J1163 and 59J1165-Up. Part of Cylinder Block and Covers shown on Page 20K
Note: For Field Replacement order 6A6669 Block Assembly plus 1-2P8783 Hardware Kit
c143401 UEH0036S
6A6669 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [2] BEARING  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 5M-6213 [1] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 1P-2717 [5] CAP  
10. 7S-3224 [10] BOLT  
11. 2S-5658 [10] WASHER  
12. 5S-6420 [2] BEARING  
13. 4B-9782 [5] BALL  
14. 5S-6419 [4] BEARING  
15. 2A-3798 [2] DOWEL  
 

#UEH0036S0048
 

CRANKSHAFT

CRANKSHAFT
c124368 UEH0036S
None CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3S-9730 [5] BEARING  
  3S-7774 [2] PLATE  
  9F-2247 [4] PLUG  
    (PART OF CRANKSHAFT ASSEM. 5S5252)
  5S-9022 [1] SEAL  
    -OR-
  5S-6297 [1] SEAL ASSEM.  
    (WITH SLEEVE FOR WORN JOURNAL)
  5S-5252 [1] CRANKSHAFT ASSEM.  
  6B-5310 [1] BOLT  
  5S-9948 [1] WASHER  
  5S-9021 [1] SEAL  
  4M-9933 [1] GEAR (40 TEETH)  
  5H-2671 [1] KEY  
    (PARTS OF CRANKSHAFT ASSEM. 5S5252)
  5S-8038 [1] PULLEY  
 

#UEH0036S0049
 

8S-3978: FOR USE WITH STANDARD CRANKSHAFT

8S3978 FOR USE WITH STANDARD CRANKSHAFT
CRANKSHAFT BEARING REPLACEMENT GROUPS
UEH0036S0049 UEH0036S
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    Complete set of Bearing Assemblies as shown with Standard Crankshaft
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3304 VEHICULAR ENGINE
Cylinder Liner
3304 VEHICULAR ENGINE
Cylinder Liner Projection
3304 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3304 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Cylinder Liners
D4 TRACTOR ENGINE
Crankshaft Main Bearings
D4 TRACTOR ENGINE
Camshaft Bearings
D4 TRACTOR ENGINE
Balancer Shaft Bearings
D4 TRACTOR ENGINE
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines {1210,1211}
1999/01/18

Caterpillar Parts SIS Catalog D4D :

CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
8A-2326 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
8A-2326 CYLINDER BLOCK AND COVERS
5S-6433 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
7S-1228 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
8S-3201 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
8S-3201 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
6A-6669 CYLINDER BLOCK AS
CRANKSHAFT
CRANKSHAFT

Truck sale:

Caterpillar D4D, Construction
14,000 
Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT
CATERPILLAR D4D 1966
 
CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR D4D 1973
 
CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CAT D4D
USD $39,016 
CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia
CAT D4D
USD $18,900 
CAT D4D

DRC Ranch
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.