AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS (5S9042 N/S)--Side View--Part 1 of 2 Serial No. 62J606 to 62J619 and 62J621-Up 6A6670 Cylinder Block parts are shown on Page 22A See Page 24 for Gasket Kits D5


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS
BASIC ENGINE
FLYWHEEL GP

TRACK-TYPE TRACTOR D5 TRACK-TYPE TRACTOR 62J
 D5 TRACTOR 62J00001-00654 (MACHINE) UEH0111S D5 62J   (1969)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
5S-9042 CYLINDER BLOCK AND COVERS
5S-9042 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-9042 CYLINDER BLOCK AND COVERS
5S-9042 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-9042 CYLINDER BLOCK AND COVERS
5S-9042 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
8S-3301 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
6A-6670 CYLINDER BLOCK AS
 

#UEH0111S0040
 

5S-9042: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S9042 N/S)--Side View--Part 1 of 2
Serial No. 62J606 to 62J619 and 62J621-Up
6A6670 Cylinder Block parts are shown on Page 22A
See Page 24 for Gasket Kits
c143083 UEH0111S
5S9042 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6A-6670 CY [1] BLOCK ASSEM.  
    (Separate Illustration)
2. 0S-1594 [10] BOLT  
3. 3B-4506 [53] LOCKWASHER  
4. 1M-0130 [1] COVER  
  4M-6480 [1] GASKET  
5. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
6. 5S-6670 C [18] SEAL  
7. 2P-8889 C [6] LINER  
8. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
9. 5S-7134 [1] GASKET  
10. 5M-6214 [1] PLUG  
11. 5B-8030 [1] WASHER  
12. 5M-6213 [6] PLUG  
13. 5S-7135 [1] GASKET  
14. 0T-0573 [5] BOLT  
15. 9H-6067 [1] SEAL  
16. 8S-0501 [1] TUBE ASSEM.  
17. 8S-1965 [1] GASKET  
18. 0S-1591 [13] BOLT (1.50" long)  
19. 2A-4639 [7] BOLT (1.625" long)  
20. 8S-1961 [1] PLATE ASSEM.  
21. 4M-2969 [1] GASKET  
22. 0T-0102 [1] BOLT  
  0L-0364 [1] LOCK  
23. 0L-1351 [18] BOLT  
24. 0L-0827 [1] PLUG  
  0L-1124 [1] GASKET  
25. 9H-5921 [1] GASKET  
26. 7S-7780 [1] HOUSING ASSEM.  
27. 2A-3798 [2] DOWEL  
28. 8S-0775 [2] SHIM (.049" thick)  
  8S-0776 [2] SHIM (.065" thick)  
  8S-0777 [2] SHIM (.083" thick)  
29. 9M-3637 [4] SPACER  
30. 3S-0919 [1] BRACKET (R.H.)  
  3S-0920 [1] BRACKET (L.H.)  
31. 1D-4586 [4] BOLT  
  9H-1024 [4] WASHER  
32. 0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
33. 4B-3938 [1] PLUG  
34. 7M-4593 [6] PLUG  
35. 3J-5389 [2] PLUG  
36. 4B-4278 [28] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEH0111S0041
 

5S-9042: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S9042 N/S)--End View--Part 2 of 2
Serial No. 62J606 to 62J619 and 62J621-Up
Refer also to Page 111 for special parts
c143201 UEH0111S
5S9042 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-0633 [1] SUPPORT ASSEM.  
2. 7S-1234 [1] BUSHING ASSEM.  
3. 0L-1143 [9] BOLT  
4. 3B-4506 C [20] LOCKWASHER  
5. 0S-1594 [9] BOLT  
6. 9S-3187 [1] LOCK  
7. 9H-4891 [1] GASKET  
8. 1B-4203 [6] NUT  
9. 2N-2753 [1] COVER  
10. 1C-2251 [2] BOLT  
11. 9S-8991 [1] COVER ASSEM.  
12. 6H-0192 [4] STUD  
13. 8S-6814 [2] DOWEL  
14. 3B-2460 [1] STUD  
15. 5S-8055 [1] GASKET  
16. 1A-2029 [3] BOLT  
17. 5S-8092 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 8S-3995 [1] GAUGE ASSEM.  
19. 9S-1796 [1] TUBE ASSEM.  
20. 7S-1803 [1] CAP ASSEM.  
21. 9S-3188 [1] LOCK  
22. 4M-4419 [1] LOCK  
23. 1D-4612 [2] BOLT  
  2J-3506 [2] NUT  
  5H-1504 [2] WASHER  
24. 0S-1595 [4] BOLT  
  4F-7356 [4] LOCK  
25. 8S-1326 [1] FITTING  
26. 0L-1352 [3] BOLT  
27. 9S-5417 [1] PAN  
28. 5M-9136 [1] LOCK  
29. 1A-1460 [11] BOLT  
30. 5M-9132 [1] LOCK  
31. 5M-9135 [1] LOCK  
32. 2B-0947 [2] BOLT  
33. 5M-9134 [1] LOCK  
34. 5M-9131 [1] LOCK  
35. 6A-3246 [1] TUBE  
36. 3B-8998 [3] FITTING  
  1F-1344 [1] NUT  
37. 4B-7739 [1] PLUG  
38. 4B-4278 [3] WASHER  
  C   INDICATES CHANGE
 

#UEH0111S0042
 

8S-3301: CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY (8S3301 N/S)
Serial No. 62J1 to 62J605 and 62J620 inclusive
Part of Cylinder Block and Covers shown on Page 20 and 20B
Note: For Field Replacement order 8S3710 Service Block Assembly
c106828 UEH0111S
8S3301 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [1] PLUG  
2. 8B-1312 [2] DOWEL  
3. 7M-4046 [4] BEARING  
4. 4B-5387 [2] PLUG  
5. 5B-7652 [2] DOWEL  
6. 5S-8462 [1] STUD  
7. 8B-6349 [2] DOWEL  
8. 4B-9782 [1] BALL  
9. 9M-5477 [1] BEARING  
10. 7S-3224 [14] BOLT  
  2S-5658 [14] WASHER  
11. 8S-4676 [7] BEARING CAP GROUP  
  8S-4674 [2] SHIM (Long)  
  8S-4673 [6] SHIM (Short)  
    (Parts of 8S4676 Bearing Cap Group)
 

#UEH0111S0043
 

6A-6670: CYLINDER BLOCK AS

6A6670 CYLINDER BLOCK ASSEMBLY
Serial No. 62J606 to 62J619 and 62J621-Up
Part of Cylinder Block and Covers shown on Page 20D
Note: For Field Replacement order 6A6670 Block Assembly plus 1-2P8782 Hardware Kit
c142099 UEH0111S
6A6670 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [1] PLUG  
2. 8B-1312 [2] DOWEL  
3. 7M-4046 [4] BEARING  
4. 4B-5387 [2] PLUG  
5. 5B-7652 [2] DOWEL  
6. 5S-8462 [1] STUD  
7. 8B-6349 [2] DOWEL  
8. 4B-9782 [1] BALL  
9. 9M-5477 [1] BEARING  
10. 7S-3224 [14] BOLT  
  2S-5658 [14] WASHER  
11. 1P-2717 [7] CAP  
 

#UEH0111S0044
 

5S-9920: CRANKSHAFT

CRANKSHAFT (5S9920 N/S)
Serial No. 62J1 to 355, 358 to 363, 365, 366, 370, 490 to 628 and 62J639 inclusive
c112032 UEH0111S
5S9920 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-0716 [2] PLATE  
2. 3S-9730 [7] BEARING  
3. 5S-9021 [1] SEAL  
4. 5S-9948 [1] WASHER  
5. 6B-5310 [1] BOLT  
6. 7S-2233 [1] DAMPER ASSEM.  
7. 5S-9022 [1] SEAL  
    -or-
  5S-6297 [1] SEAL ASSEM.  
    (With Sleeve for Worn Flange)
8. 5S-5871 [1] CRANKSHAFT ASSEM.  
9. 9F-2247 [6] PLUG  
10. 5H-2671 [1] KEY  
11. 4M-9933 [1] GEAR (40 Teeth)  
    (Parts of 5S5871 Crankshaft Assem.)
 

#UEH0111S0045
 

6A-3263: CRANKSHAFT

CRANKSHAFT (6A3263 N/S)
Serial No. 62J356, 62J357, 62J364, 62J367 to 62J369 and 62J371 to 62J489 inclusive
c110078 UEH0111S
6A3263 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-7774 [2] PLATE  
2. 3S-9730 [7] BEARING  
3. 5S-9021 [1] SEAL  
4. 5S-9948 [1] WASHER  
5. 6B-5310 [1] BOLT  
6. 7S-2233 [1] DAMPER ASSEM.  
7. 5S-9022 [1] SEAL  
    -or-
  5S-6297 [1] SEAL ASSEM.  
    (With Sleeve for Worn Flange)
8. 6A-3262 [1] CRANKSHAFT ASSEM.  
9. 9F-2247 [6] PLUG  
10. 5H-2671 [1] KEY  
11. 4M-9933 [1] GEAR (40 Teeth)  
    (Parts of 6A3262 Crankshaft Assem.)
 

#UEH0111S0046
 

5S-9920: CRANKSHAFT

CRANKSHAFT (5S9920 N/S)
Serial No. 62J629 to 62J638 and 62J640-Up
c142267 UEH0111S
5S9920 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-0716 [2] PLATE  
2. 3S-9730 [7] BEARING  
3. 5S-9021 [1] SEAL  
4. 5S-9948 [1] WASHER  
5. 6B-5310 [1] BOLT  
6. 2P-3177 C [1] DAMPER ASSEM.  
7. 5S-9022 [1] SEAL  
    -or-
  5S-6297 [1] SEAL ASSEM.  
    (With Sleeve for Worn Flange)
8. 5S-5871 [1] CRANKSHAFT ASSEM.  
9. 9F-2247 [6] PLUG  
10. 5H-2671 [1] KEY  
11. 4M-9933 [1] GEAR (40 Teeth)  
  C   INDICATES CHANGE
 

#UEH0111S0047
 

CRANKSHAFT BEARING REPLACEMENT GROUPS

CRANKSHAFT BEARING REPLACEMENT GROUPS
UEH0111S0047 UEH0111S
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8S-3982 FOR USE WITH STANDARD CRANKSHAFT  
    Complete set of Bearing Assemblies as shown with STANDARD CRANKSHAFT
  8S-3983 FOR USE WITH .010 UNDERSIZE CRANKSHAFT  
  4S-8881 [7] BEARING  
  2P-0716 [2] PLATE  
  8S-3984 FOR USE WITH .020 UNDERSIZE CRANKSHAFT  
  4S-8883 [7] BEARING  
  2P-0716 [2] PLATE  
  8S-3985 FOR USE WITH .030 UNDERSIZE CRANKSHAFT  
  4S-8885 [7] BEARING  
  2P-0716 [2] PLATE  
 

#UEH0111S0048
 

GASKET KITS

GASKET KITS
UEH0111S0048 UEH0111S
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8S-7062 DIESEL ENGINE BASIC  
  8S-7064 DIESEL ENGINE SUPPLEMENTARY  
  8S-7059 VALVE GRINDING  
  8S-7058 CYLINDER LINER AND PISTON REPLACEMENT  
    NOTE: PISTON AND LINER REPLACEMENT REQUIRE THE USE OF 8S7059 AND 8S7058 GASKET KITS
  8S-7057 WATER PUMP  
  9S-1064 FLYWHEEL CLUTCH  
  9S-1068 TRANSMISSION  
 

#UEH0111S0049
 

7S-7878: FLYWHEEL GP

FLYWHEEL (7S7878 N/S)
Serial No. 62J1 to 62J532, 62J558 to 62J564 and 62J566 inclusive
c105733 UEH0111S
7S7878 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1565 [9] BOLT  
2. 1M-7341 [1] LOCK  
3. 8S-8193 [1] FLYWHEEL ASSEM.  
4. 2S-7037 [1] GEAR (156 Teeth)  
    (Part of 8S8193 Flywheel Assem.)
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Caterpillar Parts SIS Catalog D5 :

5S-9042 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-9042 CYLINDER BLOCK AND COVERS
5S-9042 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-9042 CYLINDER BLOCK AND COVERS
5S-6444 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-6444 CYLINDER HEAD AND VALVE MECHANISM
5S-6444 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-6444 CYLINDER HEAD AND VALVE MECHANISM
5S-9042 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
8S-3301 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
6A-6670 CYLINDER BLOCK AS
CRANKSHAFT
5S-9920 CRANKSHAFT
CRANKSHAFT
6A-3263 CRANKSHAFT
CRANKSHAFT
5S-9920 CRANKSHAFT
CRANKSHAFT BEARING REPLACEMENT GROUPS
GASKET KITS

Truck sale:

1980 CAT D550B
USD $19,800 
1980 CAT D550B

DON'S TRUCK & TRAILER SALES
Henryville, Indiana
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.