AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7K5443 MULTI-PURPOSE BUCKET ARRANGEMENT Only separate parts serviced. When complete Group is required order 9K6717 shown on Page 148-2 930


WORK TOOLS
BUCKET GP
HYDRAULIC SYSTEM
CYLINDER GP
WORK TOOLS
BUCKET GP
HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
WORK TOOLS
BUCKET GP

WHEEL LOADER 930 WHEEL LOADER 79J
 930 WHEEL LOADER 79J00001-02223 (MACHINE) UEH0112S 930 79J   (1978)

WORK TOOLS

BUCKET GP
9K-6717 MULTI-PURPOSE BUCKET ARRANGEMENT
7K-5443 MULTI-PURPOSE BUCKET ARRANGEMENT
6K-9240 SIDE DUMP BUCKET ARRANGEMENT
7K-0388 MULTI-PURPOSE BUCKET ARRANGEMENT
BUCKET AND SUPPORT GROUP
6K-7103 BUCKET AND SUPPORT GROUP
 

#UEH0112S0390
 

7K-5443: MULTI-PURPOSE BUCKET ARRANGEMENT

7K5443 MULTI-PURPOSE BUCKET ARRANGEMENT
Only separate parts serviced. When complete Group is
required order 9K6717 shown on Page 148-2
UEH0112S0390 UEH0112S
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7J-6789 Y [2] CYLINDER GROUP  
  7K-0524 Y [1] CYLINDER MOUNTING GROUP  
  7K-5166 Y [1] INDICATOR GROUP  
  7K-6440 Y [1] MULTI-PURPOSE BUCKET GROUP  
  7K-6868 Y [1] HYDRAULIC LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEH0112S0391
 

6K-9240: SIDE DUMP BUCKET ARRANGEMENT

6K9240 SIDE DUMP BUCKET ARRANGEMENT--
1.34 Cubic Meters (1.75 Cubic Yards) 2781.3 mm (109.50") Wide
UEH0112S0391 UEH0112S
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6J-5827 Y [1] CYLINDER GROUP  
    - OR -
  8J-5670 Y [1] CYLINDER GROUP  
  6K-7103 Y [1] BUCKET AND SUPPORT GROUP  
  7K-0511 Y [1] HYDRAULIC LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEH0112S0392
 

7K-0388: MULTI-PURPOSE BUCKET ARRANGEMENT

7K388 MULTI-PURPOSE BUCKET ARRANGEMENT--
1.34 Cubic Meters (1.75 Cubic Yards) 2438 mm (96") Wide
UEH0112S0392 UEH0112S
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6J-2805 Y [1] CYLINDER GROUP R.H.  
  6J-2806 Y [1] CYLINDER GROUP L.H.  
  7K-0392 Y [1] HYDRAULIC LINES GROUP  
  7K-0389 Y [1] MULTI-PURPOSE BUCKET GROUP  
  7K-0524 Y [1] CYLINDER MOUNTING GROUP  
  7K-5166 Y [1] INDICATOR GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEH0112S0393
 

6J-5827: CYLINDER GROUP

6J5827 CYLINDER GROUP--(chg. V0 & V1)--101.6 mm (4") Bore X 467.4 mm (18.60") Stroke
Replaced by 8J5670 shown on Page 150A
Part of 6K9240 Side Dump Bucket Arrangement listed on Page 149
c105541 UEH0112S
6J5827 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-5820 [1] CYLINDER ASSEM.  
2. 2K-4505 [1] BEARING  
    (Part of 6J5820 Cylinder Assem.)
3. 1H-8128 [1] SEAL  
4. 2K-6830 [1] RING  
5. 6J-9250 [1] HEAD  
6. 6J-6917 [1] SEAL  
7. 5J-8200 [1] SEAL  
8. 1K-6981 [1] SEAL  
9. 6J-5819 [1] ROD ASSEM.  
10. 2K-4505 [1] BEARING  
    (Part of 6J5819 Rod Assem.)
11. 0S-1625 [4] BOLT  
12. 3B-4510 [4] LOCKWASHER  
13. 5J-5402 [2] SEAL ASSEM.  
14. 3J-9325 [1] PISTON  
15. 1M-1571 [1] RING  
16. 2J-3950 [1] NUT  
 

#UEH0112S0394
 

8J-5670: CYLINDER GROUP

8J5670 CYLINDER GROUP (9K3158 N/S) (Chg. V0)--101.6 mm (4") Bore X 467.4 mm (18.60") Stroke
Part of 6K9240 Side Dump Bucket Arrangement listed on Page 149
c145551 UEH0112S
8J5670 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5671 [1] CYLINDER ASSEM.  
    (Includes)
2. 7J-9351 [1] BEARING  
3. 1H-8128 [1] SEAL  
4. 2K-6830 [1] RING  
5. 6J-9250 [1] HEAD  
6. 6J-6917 [1] SEAL  
7. 5J-8200 [1] SEAL  
8. 1K-6981 [1] SEAL  
9. 8J-5674 [1] ROD ASSEM.  
    (Includes)
10. 7J-9351 [1] BEARING  
11. 0S-1625 [4] BOLT  
12. 3B-4510 [4] LOCKWASHER  
13. 5J-5402 [2] SEAL ASSEM.  
14. 3J-9325 [1] PISTON  
15. 1M-1571 [1] RING  
16. 2J-3950 [1] NUT  
17. 5P-0093 H [4] SEAL  
  H   NOT PART OF 8J5670 CYLINDER GR
 

#UEH0112S0395
 

6K-7103: BUCKET AND SUPPORT GROUP

6K7103 BUCKET AND SUPPORT GROUP
Part of 6K9240 Side Dump Bucket Arrangement listed on Page 149
c105542 UEH0112S
6K7103 BUCKET AND SUPPORT GROUP Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING  
2. 2K-7145 [1] PIN  
3. 0S-1621 [2] BOLT  
4. 3B-4508 [4] LOCKWASHER  
5. 2K-0703 [1] WASHER BAR  
6. 2K-6947 [2] SPACER  
7. 6K-7049 [1] PIN  
8. 6K-7090 [1] YOKE ASSEM.  
9. 3K-9488 [1] SEAL  
10. 2B-4602 [2] PLUG  
11. 2K-6949 [1] COVER  
  2K-8169 [1] GASKET  
12. 0S-1594 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
13. 0S-1850 [1] SPRING  
14. 2K-6951 [1] PIN  
15. 0S-1585 [2] BOLT  
16. 3K-5628 [1] PLATE  
  5K-3285 [1] BAR  
17. 6K-7101 [1] SUPPORT ASSEM.  
18. 2K-3656 [1] BAR  
19. 5K-3284 [1] BEARING  
20. 6K-7044 [2] SHOE  
21. 6K-7045 [1] PLATE ASSEM. (right hand outer)  
22. 6K-7047 [1] PLATE ASSEM. (right hand inner)  
23. 6K-7048 [1] PLATE ASSEM. (left hand inner)  
24. 6K-7046 [1] PLATE ASSEM. (left hand outer)  
25. 6K-7041 [1] BRACKET  
    (Parts of 6K7101 Support Assem.)
26. 0S-1573 [2] BOLT  
  1K-6872 [2] NUT  
27. 3K-8008 [2] PIN  
28. 6K-7102 [1] BUCKET ASSEM.  
  6K-7100 [1] CUTTING EDGE ASSEM.  
    Consisting of:
29. 6K-7098 [1] PLATE  
30. 6K-7099 [1] CUTTING EDGE  
31. 5K-4383 [1] CORNER  
32. 3J-5169 [9] NUT  
33. 2K-3656 [2] BAR  
34. 2K-8196 [1] BEARING  
35. 6K-7104 [1] PLATE  
36. 3K-8009 [4] BEARING  
  3K-9269 [2] RING  
37. 6K-7042 [1] HINGE  
    (Parts of 6K7102 Bucket Assem.)
 

#UEH0112S0396
 

7K-0511: LINES GP-HYDRAULIC

7K511 FRONT HYDRAULIC LINES GROUP--Rear View--Type 1
Part of 6K9240 Side Dump Bucket Arrangement listed on Page 149
c107226 UEH0112S
7K0511 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7K-0508 [1] HOSE ASSEM. (40" long overall)  
    Consisting of
1. 5S-8347 [1] HOSE  
2. 3S-7166 [2] SLEEVE  
3. 3S-8363 [2] STEM ASSEM.  
4. 2K-7835 [1] BLOCK  
5. 0S-1619 [3] BOLT  
6. 1D-4717 [3] NUT  
7. 3B-4506 [35] LOCKWASHER  
8. 2K-0190 [14] FLANGE  
9. 4J-5267 [7] SEAL  
10. 1A-2029 [32] BOLT  
  7K-2130 [1] HOSE ASSEM. (54" long overall)  
    Consisting of
11. [1] HOSE  
12. 3S-7165 [1] STEM ASSEM.  
13. 3S-7166 [2] SLEEVE  
14. 3S-8359 [1] STEM ASSEM. (30 degrees)  
  7K-2129 [1] HOSE ASSEM. (57.40" long overall)  
    Consisting of:
15. [1] HOSE  
16. 3S-7165 [1] STEM ASSEM.  
17. 3S-7166 [2] SLEEVE  
18. 3S-8359 [1] STEM ASSEM. (30 degrees)  
  7K-0507 [1] HOSE ASSEM. (36" long overall)  
    Consisting of:
19. [1] HOSE  
20. 3S-8362 [1] STEM ASSEM.  
21. 3S-7166 [2] SLEEVE  
22. 5S-6102 [1] STEM ASSEM. (90 degrees)  
23. 4J-0519 [1] SEAL  
24. 1H-3305 [2] FLANGE  
 

#UEH0112S0397
 

7K-0511: LINES GP-HYDRAULIC

7K511 FRONT HYDRAULIC LINES GROUP--Rear View--Type 2
Part of 6K9240 Side Dump Bucket Arrangement listed on Page 149
c215078 UEH0112S
7K0511 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-0508 [1] HOSE ASSEM.  
    (Includes)
  5P-0180 CH HOSE 90.42 cm(35.6 in.)  
2. 3S-7166 [2] SLEEVE  
3. 3S-8363 [2] STEM ASSEM. (90 degrees)  
4. 2K-7835 [1] BLOCK  
5. 0S-1619 [3] BOLT  
6. 1D-4717 [3] NUT  
7. 3B-4506 C [3] LOCKWASHER  
8. 1P-4576 C [14] FLANGE  
9. 4J-5267 [7] SEAL  
10. 1P-4577 C [2] FLANGE  
11. 7K-2130 [1] HOSE ASSEM.  
    (Includes)
  5P-0180 CH HOSE 125.98 cm(49.6 in.)  
12. 3S-7165 [1] STEM ASSEM. (straight)  
13. 3S-7166 [2] SLEEVE  
14. 3S-8359 [1] STEM ASSEM. (30 degrees)  
15. 7K-2129 [1] HOSE ASSEM.  
    (Includes)
  5P-0180 CH HOSE 134.62 cm(53 in.)  
16. 3S-7165 [1] STEM ASSEM. (straight)  
17. [2] SLEEVE  
18. 3S-8359 [1] STEM ASSEM. (30 degrees)  
19. 7K-0507 [1] HOSE ASSEM.  
    (Includes)
  5P-0180 CH HOSE 80.01 cm(31.5 in.)  
20. 3S-8362 [1] STEM ASSEM.  
21. 3S-7166 [2] SLEEVE  
22. 5S-6102 [1] STEM ASSEM. (90 degrees)  
23. 4J-0520 C [1] SEAL  
24. 1A-2029 [32] BOLT 2.86 cm(1.125 in.)  
    -OR-
  0S-1588 C [32] BOLT 3.18 cm(1.25 in.)  
  4B-4278 C [32] WASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEH0112S0398
 

7K-0389: MULTI-PURPOSE BUCKET GROUP

7K389 MULTI-PURPOSE BUCKET GROUP--Type 1
Part of 7K388 Multi-Purpose Bucket Arrangement listed on Page 149
c105613 UEH0112S
7K0389 MULTI-PURPOSE BUCKET GROUP Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-0390 [1] BULLDOZER ASSEM.  
2. 2K-3656 [2] BAR  
3. 7K-0327 [1] HINGE ASSEM. (right hand-outer)  
  7K-0329 [1] HINGE ASSEM. (right hand-inner)  
  7K-0330 [1] HINGE ASSEM. (left hand-inner)  
  7K-0328 [1] HINGE ASSEM. (left hand-outer)  
4. 6K-3847 [4] BAR  
    (1 in each 7K327, 7K329, 7K330, and 7K328 Hinge Assem.)
5. 7K-0317 [2] BEARING  
6. 5K-0374 [2] BEARING  
    (Parts of 7K390 Bulldozer Assem.)
7. 1A-2029 [2] BOLT  
8. 3B-4506 [2] LOCKWASHER  
9. 4B-5271 [2] WASHER  
10. 4K-9376 [1] INDICATOR  
11. 6H-1717 [4] BOLT  
12. 3B-4508 [4] LOCKWASHER  
13. 3B-8489 [2] FITTING  
14. 6K-3824 [2] PIN ASSEM.  
15. 7K-0391 [1] BOWL ASSEM.  
16. 7K-0322 [2] HINGE  
17. 7K-0308 [2] BAR  
18. 7K-0312 [1] BAR  
19. 7K-0305 [3] BAR  
20. 2K-3656 [1] BAR  
  7K-0483 [1] CUTTING EDGE ASSEM.  
    (Parts of 7K391 Bowl Assem.)
    Consisting of:
21. 6K-3853 [1] CORNER (right hand)  
  6K-3854 [1] CORNER (left hand)  
22. 7K-0323 [1] CUTTING EDGE  
23. 7K-0310 [1] CUTTING EDGE  
24. 4F-3654 [16] BOLT  
25. 1D-4720 [16] NUT  
 

#UEH0112S0399
 

7K-0389: MULTI-PURPOSE BUCKET GROUP

7K389 MULTI-PURPOSE BUCKET GROUP - Type 2
Part of 7K388 Multi-Purpose Bucket Arrangement listed on Page 149
c117007 UEH0112S
7K0389 MULTI-PURPOSE BUCKET GROUP Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-0390 [1] BULLDOZER ASSEM.  
2. 2K-3656 [2] BAR  
3. 7K-0327 [1] HINGE ASSEM. (R.H.-Outer)  
  7K-0329 [1] HINGE ASSEM. (R.H.-Inner)  
  7K-0330 [1] HINGE ASSEM. (L.H.-Inner)  
  7K-0328 [1] HINGE ASSEM. (L.H.-Outer)  
4. 6K-3847 [4] BAR  
    (1 in each 7K327, 7K329, 7K330, and 7K328 Hinge Assem.)
5. 7K-0317 [2] BEARING  
6. 5K-0374 [2] BEARING  
7. 1A-2029 [2] BOLT  
8. 3B-4506 [2] LOCKWASHER  
9. 4B-5271 [2] WASHER  
10. 4K-9376 [1] INDICATOR  
11. 6H-1717 [4] BOLT  
12. 3B-4508 [4] LOCKWASHER  
13. 3B-8489 [2] FITTING  
14. 6K-3824 [2] PIN ASSEM.  
15. 9K-6729 C [1] BOWL ASSEM.  
16. 7K-0322 [2] HINGE  
17. 9K-5697 [2] BAR  
18. 2K-3656 [1] BAR  
19. 8K-6455 [1] CORNER (R.H.)  
  8K-6456 [1] CORNER (L.H.)  
20. 8K-8161 [1] CUTTING EDGE  
21. 7K-0310 [1] CUTTING EDGE  
22. 4F-3654 [16] BOLT  
  1D-4720 [16] NUT  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Installation Of Bucket Hinge Pin Bearing Bosses{6119}
Installation Of Bucket Hinge Pin Bearing Bosses{6119}
Inspection of Slag Buckets{6110}
Inspection of Slag Buckets{6110}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket
920 & 930 WHEEL LOADER VEHICLE SYSTEMS
Bucket Positioner
920 & 930 WHEEL LOADER VEHICLE SYSTEMS
Bucket Positioner Master Cylinder
920 & 930 WHEEL LOADER VEHICLE SYSTEMS
Bucket Positioner Or Lift Kickout Master Cylinder
920 & 930 WHEEL LOADER VEHICLE SYSTEMS
Bucket Positioner And Lift Kickout Slave Cylinders
920 & 930 WHEEL LOADER VEHICLE SYSTEMS
Bucket Positioner Or Lift Kickout Slave Cylinder
920 & 930 WHEEL LOADER VEHICLE SYSTEMS
Service Magazine
New Corner Guard System Improves Bucket Performance And Increases Service Life; Drawings For Fabricated Welding Fixture Available{6120,6121,6122,6801,6802,0626,6101,6103,6104}
1980/10/27
Welding Fixture For Installation Of Bucket Corner Guards Available{0626,6100,6801,6802}
1981/03/30
New Bucket Cutting Edges Give Longer Service Life And Improved Penetration (Cutting Ability){6801}
1981/11/16
Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30
Replacement Tip Or Boss Assemblies Are Available For The Ends Of Bucket Lift Arms{6119}
1978/01/09
Revised Special Instruction, SEHS8433-04, &quot;Repair Of Wheel And Track Loader Lift Arms And Levers&quot; Available {0374,6107,6116,6119}
1998/12/07
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
Wheel Loader Bucket Lifting Point Color Change {6001, 6101, 6102, 6104, 6110, 6131, 6132, 6529, 6531, 6704}
2011/02/24

Caterpillar Parts SIS Catalog 930 :

INDICATOR GROUP
7K-5166 INDICATOR GROUP
9K-6717 MULTI-PURPOSE BUCKET ARRANGEMENT
4V-7917 REAR DIFFERENTIAL GROUP
DIFFERENTIAL GP
8K-5992 DIFFERENTIAL GP
DIFFERENTIAL GP
8K-5992 DIFFERENTIAL GP
SIDE COUNTERWEIGHT GROUP
5K-1616 SIDE COUNTERWEIGHT GROUP
DIFFERENTIAL GROUP
5K-5606 DIFFERENTIAL GROUP
RIM GROUP
5C-4542 RIM GROUP
6K-9240 SIDE DUMP BUCKET ARRANGEMENT
7K-0388 MULTI-PURPOSE BUCKET ARRANGEMENT
CYLINDER GROUP
6J-5827 CYLINDER GROUP
CYLINDER GROUP
8J-5670 CYLINDER GROUP
BUCKET AND SUPPORT GROUP
6K-7103 BUCKET AND SUPPORT GROUP
LINES GP-HYDRAULIC
7K-0511 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
7K-0511 LINES GP-HYDRAULIC
MULTI-PURPOSE BUCKET GROUP
7K-0389 MULTI-PURPOSE BUCKET GROUP

Truck sale:

Caterpillar 930M, Wheel Loaders, Construction
167,500 
Caterpillar 930M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 930M, Wheel Loaders, Construction
245,800 
Caterpillar 930M, Wheel Loaders, Construction
- Wheel Loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 930M, Wheel Loaders, Construction
135,763 
Caterpillar 930M, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 930M, Wheel Loaders, Construction
201,289 
Caterpillar 930M, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 930M, Wheel Loaders, Construction
140,000 
Caterpillar 930M, Wheel Loaders, Construction
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.