WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)MACHINE ARRANGEMENT
MACHINE ARBRAKING SYSTEM
VALVE GPWORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#UEH0112S0430
5K-7580: TOOTH GROUP
5K7580 TOOTH GROUP--Short Tip
FOR USE WITH 6A4933 GENERAL PURPOSE BUCKET ASSEMBLY
FOR USE WITH 6A4933 GENERAL PURPOSE BUCKET ASSEMBLY
For full view, you need register
#UEH0112S0431
5K-3257: TOOTH GROUP
5K3257 TOOTH GROUP--Long Tip
FOR USE WITH 6A4933 GENERAL PURPOSE BUCKET ASSEMBLY
FOR USE WITH 6A4933 GENERAL PURPOSE BUCKET ASSEMBLY
For full view, you need register
#UEH0112S0432
4K-8941: TOOTH GROUP
4K8941 TOOTH GROUP--Long Tip
FOR USE WITH 92" and 96" WIDE GENERAL PURPOSE BUCKET ASSEMBLIES
FOR USE WITH 92" and 96" WIDE GENERAL PURPOSE BUCKET ASSEMBLIES
For full view, you need register
#UEH0112S0433
7K-0274: LUMBER FORK GROUP
7K274 LUMBER FORK GROUP--Type 1
For full view, you need register
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-3381 | [2] | STANDARD ASSEM. | |
| 2. | 5K-3383 | [2] | PIN ASSEM. | |
| 3. | 8B-2377 | [2] | BOLT | |
| 2D-6235 | [2] | NUT | ||
| 4. | 1D-4644 | [4] | BOLT | |
| 1B-4333 | [4] | NUT | ||
| 3B-4516 | [4] | LOCKWASHER | ||
| 5. | 5K-3388 | [2] | TINE ASSEM. | |
| 6. | 7K-0273 | [1] | CARRIAGE ASSEM. | |
| 7. | 7K-0269 | [1] | PLATE ASSEM. (right hand-outer) | |
| 7K-0271 | PLATE ASSEM. (right hand-inner) | |||
| 7K-0272 | [1] | PLATE ASSEM. (left hand-inner) | ||
| 7K-0270 | PLATE ASSEM. (left hand-outer) | |||
| 8. | 2K-3656 | [1] | BAR | |
| (Parts of 7K273 Carriage Assem.) | ||||
| 9. | 0S-1615 | [3] | BOLT | |
| 3B-4504 | [3] | LOCKWASHER | ||
| 10. | 4B-4276 | [1] | WASHER | |
| 11. | [2] | NUT | ||
| 12. | 7K-2353 | [1] | CAM ASSEM. | |
#UEH0112S0434
7K-0274: LUMBER FORK GROUP
7K274 LUMBER FORK GROUP--Type 2
For full view, you need register
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-3381 | [2] | STANDARD ASSEM. | |
| 2. | 5K-3383 | [2] | PIN ASSEM. | |
| 3. | 8B-2377 | [2] | BOLT | |
| 2D-6235 | [2] | NUT | ||
| 4. | 1D-4644 | [4] | BOLT | |
| 1B-4333 | [4] | NUT | ||
| 3B-4516 | [4] | LOCKWASHER | ||
| 5. | 5K-3388 | [2] | TINE ASSEM. | |
| 6. | 7K-0273 | [1] | CARRIAGE ASSEM. | |
| 7. | 7K-0269 | [1] | PLATE ASSEM. (R.H.-outer) | |
| 7K-0271 | [1] | PLATE ASSEM. (R.H.-inner) | ||
| 7K-0272 | [1] | PLATE ASSEM. (L.H.-inner) | ||
| 7K-0270 | [1] | PLATE ASSEM. (L.H.-outer) | ||
| 8. | 2K-3656 | [1] | BAR | |
| 9. | 0S-1615 C | [1] | BOLT | |
| 3B-4504 | [1] | LOCKWASHER | ||
| 10. | 4B-4278 C | [1] | WASHER | |
| 11. | 1D-4717 C | [2] | NUT | |
| 12. | 2V-5127 C | [1] | CAM ASSEM. | |
| 13. | 0T-0102 | [2] | BOLT | |
| 3B-4506 C | [2] | LOCKWASHER | ||
| 4B-4278 | [2] | WASHER | ||
| 14. | 8K-4079 C | [1] | BRACKET | |
| C | INDICATES CHANGE | |||
#UEH0112S0435
7J-9969: VALVE GP
For full view, you need register
#UEH0112S0436
5K-7581: TOOTH GROUP
5K7581 TOOTH GROUP--Short Tip
FOR USE WITH 92" AND 96" WIDE BUCKET ASSEMBLIES AND
7K388 MULTI-PURPOSE BUCKET ARRANGEMENT
FOR USE WITH 92" AND 96" WIDE BUCKET ASSEMBLIES AND
7K388 MULTI-PURPOSE BUCKET ARRANGEMENT
For full view, you need register
#UEH0112S0437
8J-6658: TOOTH GROUP
8J6658 TOOTH GROUP--Long Tip
9J3169 Tip parts are shown on Page 160A-4
9J3169 Tip parts are shown on Page 160A-4
For full view, you need register
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS#UEH0112S0438
8J-6657: TOOTH GROUP
8J6657 TOOTH GROUP--Short Tip
9J3178 Tip parts are shown on Page 160A-4
9J3178 Tip parts are shown on Page 160A-4
For full view, you need register
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS#UEH0112S0439
6A-8646: TOOTH GROUP
6A8646 TOOTH GROUP
Only separate parts serviced
Only separate parts serviced
For full view, you need register
Parts for your 930 WHEEL LOADER:
CATERPILLAR SISInformation:
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
Special Instruction
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
1981/02/23
New Bucket Cutting Edges Give Longer Service Life And Improved Penetration (Cutting Ability){6801}
1981/11/16
1981/11/16
