AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5S6429 CONNECTING ROD AND PISTON GROUP--6 Required D5 TRACK-TYPE TRACTOR


BASIC ENGINE
PISTON & ROD GP
CAMSHAFT GP
OPERATOR STATION
PANEL GP
BASIC ENGINE
DRIVE GP-ACCESSORY
FUEL SYSTEM
CONTROL GP-GOVERNOR
OPERATOR STATION
PANEL GP

TRACK-TYPE TRACTOR D5 TRACK-TYPE TRACTOR 63J
 D5 TRACTOR 63J00001-00953 (MACHINE) UEH0117S D5 63J   (1968)

BASIC ENGINE

PISTON & ROD GP
CONNECTING ROD AND PISTON GROUP
5S-6429 CONNECTING ROD AND PISTON GROUP
 

#UEH0117S0050
 

5S-6429: CONNECTING ROD AND PISTON GROUP

5S6429 CONNECTING ROD AND PISTON GROUP--6 Required
c203943 UEH0117S
5S6429 CONNECTING ROD AND PISTON GROUP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4029 C [1] PISTON ASSEM.  
2. 7S-8378 [1] RING (Top)  
3. 5S-6750 [1] RING (Intermediate)  
4. 9S-7788 [1] RING (Oil)  
5. 7M-7821 [1] BEARING (Standard)  
  2S-0502 [1] BEARING (.010" Undersize)  
  2S-0503 [1] BEARING (.020" Undersize)  
  7M-7826 [1] BEARING (.030" Undersize)  
6. 5S-6360 [1] ROD ASSEM.  
  7S-9347 [1] BEARING  
7. 1P-9956 C [2] BOLT  
8. 5S-6348 [2] NUT  
9. 9H-4016 [1] PIN  
10. 9H-4015 [2] RETAINER  
  7S-9404 [1] RING GROUP  
    (Consists of Complete set of Rings FOR ONE PISTON)
  C   INDICATES CHANGE
 

#UEH0117S0051
 

5S-6438: CAMSHAFT

CAMSHAFT (5S6438 N/S)
c112404 UEH0117S
5S6438 CAMSHAFT Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [4] BOLT  
2. [1] GEAR (80 Teeth)  
3. [1] CAMSHAFT  
4. [2] BOLT  
5. [1] WASHER  
6. [1] LOCK  
7. [1] LOCK  
 

#UEH0117S0052
 

7S-0770: ENGINE GAUGES

ENGINE GAUGES (7S770 N/S)
Serial No. 63J1 to 63J342 inclusive
Refer also to Page 115 for special parts
c124083 UEH0117S
7S0770 ENGINE GAUGES Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-9068 [1] GAUGE (Fuel Pressure)  
2. 4S-8385 CH TUBE (Fuel Pressure) 14.62"  
3. 3B-9054 C [1] FITTING  
  8F-8996 [1] NUT  
    (Part of 3B9054 Fitting)
4. 3S-4131 C [1] GAUGE (Water Pressure)  
5. 3B-8989 [2] FITTING  
  1F-1344 [2] NUT  
    (1 in each 3B8989 Fitting)
6. 4S-9207 C [1] HEAT INDICATOR  
7. 5M-1065 [1] GAUGE (Engine Oil Pressure)  
8. 4S-8385 CH TUBE (Fuel Pressure) 24.01"  
9. 3B-9000 C [2] FITTING  
  1F-1344 [4] NUT  
    (2 in each 3B9000 Fitting)
10. 4S-8990 C [3] CLAMP  
  4S-8989 C [6] GROMMET  
11. 0S-1617 C [3] BOLT  
12. 1S-0432 [4] GROMMET  
13. 1D-4717 [4] NUT  
  3B-4506 [4] LOCKWASHER  
14. 1S-0430 [2] CLAMP  
15. 3B-8998 [1] FITTING  
  1F-1344 [1] NUT  
    (Part of 3B8998 Fitting)
16. 4S-8385 H TUBE (Fuel Pressure) 25.59"  
17. 3B-8990 [1] FITTING  
  1F-1344 [2] NUT  
    (Part of 3B8990 Fitting)
  5K-6437 [1] CLIP  
18. 4S-8385 H TUBE (Fuel Pressure) 35.64"  
19. 1H-7922 [1] FITTING  
  1F-1344 [1] NUT  
    (Part of 1H7922 Fitting)
20. 4S-8385 CH TUBE (Engine Oil Pressure) 51.10"  
21. 6H-6699 [1] ADAPTER (Heat Indicator)  
  C   INDICATES CHANGE FROM PREVIOUS
  H   ORDER BY THE FOOT
 

#UEH0117S0053
 

7S-0770: ENGINE GAUGES

ENGINE GAUGES (7S770 N/S)
Serial No. 63J343 to 63J805 inclusive
Refer also to Page 115 for special parts
c109996 UEH0117S
7S0770 ENGINE GAUGES Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-9068 [1] GAUGE (Fuel Pressure)  
2. 4S-8385 H TUBE (Fuel Pressure) 14.62"  
3. 3B-9054 [1] FITTING  
  8F-8996 [1] NUT  
    (Part of 3B9054 Fitting)
4. 3S-4131 [1] GAUGE (Water Pressure)  
5. 3B-8989 [1] FITTING  
  1F-1344 [1] NUT  
    (1 in each 3B8989 Fitting)
6. 4S-9207 [1] HEAT INDICATOR  
7. 5M-1065 [1] GAUGE (Engine Oil Pressure)  
8. 4S-8385 H TUBE (Fuel Pressure) 24.01"  
9. 3B-9000 [2] FITTING  
  1F-1344 [4] NUT  
    (2 in each 3B9000 Fitting)
10. 4S-8990 [3] CLAMP  
  4S-8989 [6] GROMMET  
11. 3B-6768 C [1] BUSHING  
12. 1S-0432 [4] GROMMET  
13. 1D-4717 [4] NUT  
  3B-4506 [4] LOCKWASHER  
14. 1S-0430 [2] CLAMP  
15. 3B-8998 [1] FITTING  
  1F-1344 [1] NUT  
    (Part of 3B8998 Fitting)
16. 4S-8385 H TUBE (Fuel Pressure) 25.59"  
17. 3B-8990 [1] FITTING  
  1F-1344 [2] NUT  
    (Part of 3B8990 Fitting)
  5K-6437 [1] CLIP  
18. 4S-8385 H TUBE (Fuel Pressure) 35.64"  
19. 3K-6675 [1] FITTING  
  4K-9822 C [1] NUT  
  4K-9821 [1] SLEEVE  
    (Parts of 3K6675 Fitting)
20. 4S-8381 C TUBE (Engine Oil Pressure) 47.25"  
21. 6H-6699 [1] ADAPTER (Heat Indicator)  
22. 4K-8569 [1] UNION  
  5K-5804 C [1] NUT  
  5K-5803 [1] SLEEVE  
    (Parts of 4K8569 Union)
  C   INDICATES CHANGE FROM PREVIOUS
  H   ORDER BY THE FOOT
 

#UEH0117S0054
 

7S-0770: ENGINE GAUGES

ENGINE GAUGES (7S770 N/S)
Serial No. 63J806 to 63J859 inclusive
Refer also to Page 115 for special parts
c138356 UEH0117S
7S0770 ENGINE GAUGES Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-9068 [1] GAUGE (Fuel Pressure)  
2. 4S-8385 H TUBE (Fuel Pressure) 25"  
3. 4K-8569 [1] UNION  
  5K-5804 [1] NUT  
  5K-5803 [1] SLEEVE  
4. 6H-6699 [1] ADAPTER (Heat Indicator)  
5. 3B-8989 [1] FITTING  
  1F-1344 [1] NUT  
6. 3S-4824 C [1] HEAT INDICATOR  
7. 5M-1065 [1] GAUGE (Engine Oil Pressure)  
8. 4S-8381 H TUBE (Engine Oil Pressure) 47.25"  
9. 3B-9000 C [1] FITTING  
  1F-1344 [2] NUT  
10. 3K-6675 [1] FITTING  
  4K-9822 [1] NUT  
  4K-9821 [1] SLEEVE  
11. 3B-6768 [1] BUSHING  
12. 1S-0432 [4] GROMMET  
13. 1D-4717 [4] NUT  
  3B-4506 [4] LOCKWASHER  
14. 1S-0430 [2] CLAMP  
15. 3B-8998 [1] FITTING  
  1F-1344 [1] NUT  
16. 4S-8385 H TUBE (Fuel Pressure) 25.59"  
17. 3B-8990 [1] FITTING  
  1F-1344 [2] NUT  
  5K-6437 [1] CLIP  
18. 4S-8385 H TUBE (Fuel Pressure) 35.64"  
19. 3A-2429 C [3] CLIP  
  C   INDICATES CHANGE
  H   ORDER BY THE FOOT
 

#UEH0117S0055
 

7S-0770: ENGINE GAUGES

ENGINE GAUGES (7S770 N/S)
Serial No. 63J860 to 63J937 inclusive
Refer also to Page 115 for special parts
c142086 UEH0117S
7S0770 ENGINE GAUGES Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-9068 [1] GAUGE (Fuel Pressure)  
2. 3D-5102 C [1] GROMMET  
3. 4K-8569 [2] UNION  
  5K-5804 [1] NUT  
  5K-5803 [1] SLEEVE  
4. 6H-6699 [1] ADAPTER (Heat Indicator)  
5. 6K-7683 C [1] FITTING  
  8H-6913 [2] NUT  
6. 3S-4824 [1] HEAT INDICATOR  
7. 5M-1065 [1] GAUGE (Engine Oil Pressure)  
8. 4S-8381 CH TUBE (Engine Oil Pressure)47.2 in  
9. 3A-2429 C [4] CLIP  
10. 3K-6675 [1] FITTING  
  4K-9822 [1] NUT  
  4K-9821 [1] SLEEVE  
11. 3B-6768 [1] BUSHING  
12. 1S-0432 [4] GROMMET  
13. 1D-4717 [4] NUT  
  3B-4506 [4] LOCKWASHER  
14. 1S-0430 [2] CLAMP  
15. 8H-6912 C [1] FITTING  
16. 4S-8456 CH TUBE (Fuel Pressure) 41.41 in.  
17. 4S-8381 H TUBE (Fuel Pressure) 48.8 in.  
  C   INDICATES CHANGE
  H   ORDER BY THE FOOT
 

#UEH0117S0056
 

7S-0770: ENGINE GAUGES

ENGINE GAUGES (7S770 N/S)
Serial No. 63J938-Up
Refer also to Page 115 for special parts
c119333 UEH0117S
7S0770 ENGINE GAUGES Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] GAUGE (Fuel Pressure)  
2. [1] GROMMET  
3. [2] UNION  
  [1] NUT  
  [1] SLEEVE  
4. [1] ADAPTER (Heat Indicator)  
5. [1] FITTING  
  [2] NUT  
6. [1] HEAT INDICATOR  
7. [1] GAUGE (Engine Oil Pressure)  
8. H TUBE (Engine Oil Pressure)49.2 in  
9. [4] CLIP  
10. C [1] FITTING  
  [1] NUT  
11. [1] BUSHING  
12. [4] GROMMET  
13. [4] NUT  
  [4] LOCKWASHER  
14. [2] CLAMP  
15. C [1] FITTING  
16. CH TUBE (Fuel Pressure) 41.41 in.  
17. H TUBE (Fuel Pressure) 42.12 in.  
18. C [4] WASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE FOOT
 

#UEH0117S0057
 

5S-8056: ACCESSORY DRIVE AND PRIMARY FUEL FILTER

ACCESSORY DRIVE AND PRIMARY FUEL FILTER (5S8056 N/S)
c112403 UEH0117S
5S8056 ACCESSORY DRIVE AND PRIMARY FUEL FILTER Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-9575 [ 2] BOLT  
2. 3B-4505 [ 7] LOCKWASHER  
3. 8H-9220 [ 1] GASKET  
4. 7S-5045 [ 1] HOUSING ASSEM.  
5. 9F-2247 [ 1] PLUG  
6. 2H-1190 [ 2] DOWEL  
7. 5M-6214 [ 2] PLUG  
8. 2D-6642 [ 1] BALL  
9. 2A-3348 [ 1] DOWEL  
10. 8H-9788 [ 1] GASKET  
11. 8H-9787 [ 1] COVER  
12. 1A-9136 [ 2] BOLT  
13. 8H-9364 [ 1] GASKET  
14. 7S-5047 [ 1] SHAFT  
15. 8H-9789 [ 1] BEARING  
16. 8H-9718 [ 1] RETAINER  
17. 7M-9763 [ 2] LOCK  
18. 0S-1594 [ 4] BOLT  
19. 5S-3828 [ 1] SLEEVE  
20. 5S-7614 [ 1] GEAR (80 Teeth)  
21. 7S-9847 [ 1] WASHER  
22. 9S-1313 [ 1] NUT  
23. 2H-3755 [ 2] BOLT  
24. 2F-6156 [ 1] LOCK  
25. 5S-7612 [ 1] PLATE  
26. 5S-7660 [ 1] GEAR ASSEM. (57 Teeth)  
27. 5S-7630 [ 1] BEARING  
28. 5B-9079 [ 1] NUT  
29. 0L-1351 [ 2] BOLT  
30. 5S-7611 [ 1] LOCK  
31. 5S-7608 [ 1] SHAFT  
32. 9H-2769 [ 1] BOWL  
33. 9H-2770 [ 1] GASKET  
34. 5S-7645 [ 1] ELEMENT ASSEM.  
35. 4D-0322 [ 1] BAIL ASSEM.  
36. 0S-1618 [ 3] BOLT  
37. 9L-2796 [ 1] BOLT  
 

#UEH0117S0058
 

3A-2773: LOCKING SYSTEM

3A2773 LOCKING SYSTEM
Serial No. 63J728-Up
Part of 7S774 Governor Control shown on Page 29
c138290 UEH0117S
3A2773 LOCKING SYSTEM Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-9182 [2] ROLLER  
2. 8H-9186 [2] SPRING  
3. 7M-2167 [1] RING  
4. 2S-6122 [1] PLATE ASSEM.  
5. 2S-6091 [2] DOWEL  
6. 5H-7152 [1] SPRING  
7. 8H-7577 [1] PLATE  
8. 3S-8176 [1] SHAFT  
 

#UEH0117S0059
 

9S-2326: WATER PRESSURE GAUGE GROUP

9S2326 WATER PRESSURE GAUGE GROUP
Serial No. 63J1 to 63J805 inclusive
Provides Field Replacement for 3S4131 shown on Pages 26A and 26B
c111984 UEH0117S
9S2326 WATER PRESSURE GAUGE GROUP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-4131 [1] GAUGE (Water Pressure)  
2. 1P-8563 [1] NUT  
3. 1P-8561 [1] SLEEVE  
4. 1P-8560 [1] CONNECTOR  
  1P-9132 [1] ELBOW (90 degrees)  
    (Not Shown)
 

Information:

Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores{1213,1214}
1980/08/11
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059" (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Guidelines for Inspecting Pistons {1214}
2006/01/02

Caterpillar Parts SIS Catalog D5 :

FLYWHEEL GP
7S-7753 FLYWHEEL GP
FLYWHEEL GP
7S-7753 FLYWHEEL GP
GASKET KITS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT
6A-3263 CRANKSHAFT
CRANKSHAFT
5S-9920 CRANKSHAFT
CRANKSHAFT
5S-9920 CRANKSHAFT
CYLINDER BLOCK AS
6A-6670 CYLINDER BLOCK AS
CAMSHAFT
5S-6438 CAMSHAFT
ENGINE GAUGES
7S-0770 ENGINE GAUGES
ENGINE GAUGES
7S-0770 ENGINE GAUGES
ENGINE GAUGES
7S-0770 ENGINE GAUGES
ENGINE GAUGES
7S-0770 ENGINE GAUGES
ENGINE GAUGES
7S-0770 ENGINE GAUGES
ACCESSORY DRIVE AND PRIMARY FUEL FILTER
5S-8056 ACCESSORY DRIVE AND PRIMARY FUEL FILTER
LOCKING SYSTEM
3A-2773 LOCKING SYSTEM

Truck sale:

1980 CAT D550B
USD $19,800 
1980 CAT D550B

DON'S TRUCK & TRAILER SALES
Henryville, Indiana
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.