AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS (7S7742 N/S)--End View-Part 2 of 2 Serial No. 41J1 to 41J1142 inclusive Refer also to Page 140 for special parts 920


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP

WHEEL LOADER 920 WHEEL LOADER 41J
 920 WHEEL LOADER 41J00001-02576 (MACHINE) UEH0136S 920 41J   (1970)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
8S-3201 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
8S-3201 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
6A-6669 CYLINDER BLOCK AS
 

#UEH0136S0020
 

7S-7742: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S7742 N/S)--End View-Part 2 of 2
Serial No. 41J1 to 41J1142 inclusive
Refer also to Page 140 for special parts
c112075 UEH0136S
7S7742 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [8] BOLT  
2. 9S-3188 [1] LOCK  
3. 9S-3187 [1] LOCK  
4. 7M-0232 [1] COVER  
5. 9H-4891 [1] GASKET  
6. 1B-4203 [6] NUT  
7. 3B-4506 [11] LOCKWASHER  
8. 5S-6385 [1] COVER ASSEM.  
9. 3B-2460 [1] STUD  
10. 8S-6814 [2] DOWEL  
11. 6H-0192 [4] STUD  
    (Parts of 5S6385 Cover Assem.)
12. 1C-2251 [2] BOLT  
13. 5S-8055 [1] GASKET  
14. 7S-1803 [1] CAP ASSEM.  
15. 5S-8115 [1] GAUGE ASSEM.  
16. 9S-1796 [1] TUBE ASSEM.  
17. 7S-0637 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 4M-4419 [2] LOCK  
19. 7S-7043 [2] BUSHING  
20. 7S-7779 [1] SUPPORT ASSEM.  
21. 8S-1326 [1] FITTING  
22. 0S-1595 [4] BOLT  
23. 7S-1234 [1] BUSHING ASSEM.  
24. 5M-9131 [1] LOCK  
25. 0S-1587 [13] BOLT  
26. 5M-9136 [1] LOCK  
27. 5M-9132 [1] LOCK  
28. 7M-7205 [2] LOCK  
29. 3B-4508 [6] LOCKWASHER  
30. 1A-2029 [3] BOLT  
31. 4B-2363 [1] PLUG  
  6F-4868 [1] GASKET  
32. 8S-8204 [1] PAN ASSEM.  
 

#UEH0136S0021
 

7S-7742: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S7742 N/S)--Side View-Part 1 of 2
Serial No. 41J1143 to 1882, 1887 to 1889, 1893, 1903, 1908 and 41J1916 inclusive
Cylinder Block parts are shown on Pages 22 and 22A. Note: 8S4635 Piston and Liner Group,
consisting of: 1--Piston Assembly, 1--Liner and 2--Seal, is available. See Page 24 for Gasket Kits
c139669 UEH0136S
7S7742 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-6557 [4] LINER  
2. 5S-6670 [8] SEAL  
3. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
4. 0L-1351 [14] BOLT  
5. 3B-4506 [55] LOCKWASHER  
6. 5M-1903 [1] COVER  
7. 4M-2250 [1] GASKET  
8. Y [1] BLOCK ASSEM.  
    (Separate Illustration)
9. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
10. 5S-7134 [1] GASKET  
11. 0S-1594 [8] BOLT  
12. 9H-5921 [1] GASKET  
13. 5S-7135 [1] GASKET  
14. 0L-1143 [9] BOLT  
15. 0S-1588 [18] BOLT  
16. 6A-3243 [1] TUBE  
17. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
18. 3J-5389 [2] PLUG  
19. 5B-8030 [1] SPACER  
20. 9H-6067 [1] SEAL  
21. 8S-0499 [1] TUBE ASSEM.  
22. 8S-1963 [1] GASKET  
23. 1A-2029 [6] BOLT  
24. 5S-6045 [1] GASKET  
25. 8S-1959 [1] PLATE ASSEM.  
26. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
27. 7S-0566 [1] HOUSING (Flywheel)  
28. 5M-6213 [4] PLUG  
29. 8M-3023 [4] ORIFICE  
  Y   SEPARATE ILLUSTRATION
 

#UEH0136S0022
 

7S-7742: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S7742 N/S)--End View-Part 2 of 2
Serial No. 41J1143 to 1882, 1887 to 1889, 1893, 1903, 1908 and 41J1916 inclusive
Refer also to Page 140 for special parts
c139690 UEH0136S
7S7742 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [8] BOLT  
2. 9S-3188 [1] LOCK  
3. 9S-3187 [1] LOCK  
4. 2N-2753 C [1] COVER  
5. 9H-4891 [1] GASKET  
6. 1B-4203 [6] NUT  
7. 3B-4506 [11] LOCKWASHER  
8. 9S-8991 C [1] COVER ASSEM.  
9. 3B-2460 [1] STUD  
10. 8S-6814 [2] DOWEL  
11. 0T-0101 [4] STUD  
12. 1C-2251 [2] BOLT  
13. 5S-8055 [1] GASKET  
14. 7S-1803 [1] CAP ASSEM.  
15. 5S-8115 [1] GAUGE ASSEM.  
16. 9S-1796 [1] TUBE ASSEM.  
17. 7S-0637 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 4M-4419 [2] LOCK  
19. 7S-7043 [2] BUSHING  
20. 7S-7779 [1] SUPPORT ASSEM.  
21. 8S-1326 [1] FITTING  
22. 0S-1595 [4] BOLT  
23. 7S-1234 [1] BUSHING ASSEM.  
24. 5M-9131 [1] LOCK  
25. 0S-1587 [13] BOLT  
26. 5M-9136 [1] LOCK  
27. 5M-9132 [1] LOCK  
28. 7M-7205 [2] LOCK  
29. 3B-4508 [6] LOCKWASHER  
30. 1A-2029 [3] BOLT  
31. 4B-2363 [1] PLUG  
  6F-4868 [1] GASKET  
32. 8S-8234 C [1] PAN ASSEM.  
  C   INDICATES CHANGE
 

#UEH0136S0023
 

7S-7742: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S7742 N/S)--Side View-Part 1 of 2
Serial No. 41J1883 to 1886, 1890 to 1892, 1894 to 1902, 1904 to 1907, 1909 to 1915 & 41J1917-Up
6A6669 Block parts are shown on Page 22B. See Page 24 for Gasket Kits
c143399 UEH0136S
7S7742 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-8889 C [4] LINER  
2. 5S-6670 C [12] SEAL  
3. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
4. 0L-1351 [14] BOLT  
5. 3B-4506 [55] LOCKWASHER  
6. 5M-1903 [1] COVER  
7. 4M-2250 [1] GASKET  
8. 6A-6669 CY [1] BLOCK ASSEM.  
    (Separate Illustration)
9. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
10. 5S-7134 [1] GASKET  
11. 0S-1594 [8] BOLT  
12. 9H-5921 [1] GASKET  
13. 5S-7135 [1] GASKET  
14. 0L-1143 [9] BOLT  
15. 0S-1588 [18] BOLT  
16. 6A-3243 [1] TUBE  
17. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
18. 3J-5389 [2] PLUG  
19. 5B-8030 [1] SPACER  
20. 9H-6067 [1] SEAL  
21. 8S-0499 [1] TUBE ASSEM.  
22. 8S-1963 [1] GASKET  
23. 1A-2029 [6] BOLT  
24. 5S-6045 [1] GASKET  
25. 8S-1959 [1] PLATE ASSEM.  
26. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
27. 7S-0566 [1] HOUSING (Flywheel)  
28. 5M-6213 [4] PLUG  
29. 8M-3023 [4] ORIFICE  
30. 5M-6214 C [7] PLUG  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEH0136S0024
 

7S-7742: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S7742 N/S)--End View-Part 2 of 2
Serial No. 41J1883 to 1886, 1890 to 1892, 1894 to 1902, 1904 to 1907, 1909 to 1915 & 41J1917-Up
Refer also to Page 140 for special parts
c143400 UEH0136S
7S7742 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [8] BOLT  
2. 9S-3188 [1] LOCK  
3. 9S-3187 [1] LOCK  
4. 2N-2753 [1] COVER  
5. 9H-4891 [1] GASKET  
6. 1B-4203 [6] NUT  
7. 3B-4506 [11] LOCKWASHER  
8. 9S-8991 [1] COVER ASSEM.  
9. 3B-2460 [1] STUD  
10. 8S-6814 [2] DOWEL  
11. 0T-0101 [4] STUD  
12. 1C-2251 [2] BOLT  
13. 5S-8055 [1] GASKET  
14. 7S-1803 [1] CAP ASSEM.  
15. 5S-8115 [1] GAUGE ASSEM.  
16. 9S-1796 [1] TUBE ASSEM.  
17. 7S-0637 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 4M-4419 [2] LOCK  
19. 7S-7043 [2] BUSHING  
20. 7S-7779 [1] SUPPORT ASSEM.  
21. 8S-1326 [1] FITTING  
22. 0S-1595 [4] BOLT  
23. 7S-1234 [1] BUSHING ASSEM.  
24. 5M-9131 [1] LOCK  
25. 0S-1587 [13] BOLT  
26. 5M-9136 [1] LOCK  
27. 5M-9132 [1] LOCK  
28. 7M-7205 [2] LOCK  
29. 3B-4508 [6] LOCKWASHER  
30. 1A-2029 [3] BOLT  
31. 4B-2363 [1] PLUG  
  6F-4868 [1] GASKET  
32. 8S-8234 [1] PAN ASSEM.  
 

#UEH0136S0025
 

8S-3201: CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY (8S3201 N/S)
Serial No. 41J1 to 1115, 1118 to 1120, 1122, 1123, 1127 to 1129, 1135 and 41J1146 inclusive
Part of Cylinder Block and Covers shown on Pages 20 and 20B
For Field Replacement order 8S3711 Service Block Assembly
c106653 UEH0136S
8S3201 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [2] BEARING  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 3S-8313 [2] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 8S-4676 [5] CAP GROUP  
  8S-4674 [10] SHIM (Long)  
    (2 in each 8S4676 Cap Group)
  8S-4673 [30] SHIM (Short)  
    (6 in each 8S4676 Cap Group)
10. 7S-3224 [10] BOLT  
11. 2S-5658 [10] WASHER  
12. 5S-6420 [2] BEARING  
13. 4B-9782 [5] BALL  
14. 5S-6419 [4] BEARING  
 

#UEH0136S0026
 

8S-3201: CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY (8S3201 N/S)
Serial No. 41J1116, 1117, 1121, 1124 to 1126, 1130 to 1134, 1136 to 1145, 1147 to 1882, 1887 to 1889,
1893, 1903, 1908 and 41J1916 inclusive. Part of Cylinder Block and Covers shown on Pages 20 & 20B
For Field Replacement order 8S3711 Service Block Assembly
c138918 UEH0136S
8S3201 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [2] BEARING  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 3S-8313 [2] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 1P-2717 C [5] CAP  
10. 7S-3224 [10] BOLT  
11. 2S-5658 [10] WASHER  
12. 5S-6420 [2] BEARING  
13. 4B-9782 [5] BALL  
14. 5S-6419 [4] BEARING  
  C   INDICATES CHANGE
 

#UEH0136S0027
 

6A-6669: CYLINDER BLOCK AS

6A6669 CYLINDER BLOCK ASSEMBLY
Serial No. 41J1883 to 1886, 1890 to 1892, 1894 to 1902, 1904 to 1907, 1909 to 1915, & 41J1917-Up
Part of Cylinder Block and Covers shown on Page 20D
For Field Replacement order 6A6669 Block Assembly plus 1-2P8783 Hardware Kit
c143401 UEH0136S
6A6669 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [2] BEARING  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 5M-6213 [1] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 1P-2717 [5] CAP  
10. 7S-3224 [10] BOLT  
11. 2S-5658 [10] WASHER  
12. 5S-6420 [2] BEARING  
13. 4B-9782 [5] BALL  
14. 5S-6419 [4] BEARING  
15. 2A-3798 [2] DOWEL  
 

#UEH0136S0028
 

5S-6431: CRANKSHAFT

CRANKSHAFT (5S6431 N/S)
c114220 UEH0136S
5S6431 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3S-9730 [5] BEARING  
  2P-0716 [2] PLATE  
  9F-2247 [4] PLUG  
    (PART OF CRANKSHAFT ASSEM. 5S5252)
  5S-9022 [1] SEAL  
    -OR-
  5S-6297 [1] SEAL ASSEM.  
    (WITH SLEEVE FOR WORN FLANGE)
  5S-5252 [1] CRANKSHAFT ASSEM.  
  6B-5310 [1] BOLT  
  5S-9948 [1] WASHER  
  5S-9021 [1] SEAL  
  4M-9933 [1] GEAR (40 TEETH)  
  5H-2671 [1] KEY  
    (PARTS OF CRANKSHAFT ASSEM. 5S5252)
  5S-8038 [1] PULLEY  
 

#UEH0136S0029
 

CRANKSHAFT BEARING REPLACEMENT GROUPS

CRANKSHAFT BEARING REPLACEMENT GROUPS
UEH0136S0029 UEH0136S
None CRANKSHAFT BEARING REPLACEMENT GROUPS Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Cylinder Block
3304 VEHICULAR ENGINE
Cylinder Liner
3304 VEHICULAR ENGINE
Cylinder Liner Projection
3304 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3304 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Disassembly and Assembly
Crankshaft Main Bearings
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Cylinder Liners
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Camshaft Bearings
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines {1210,1211}
1999/01/18
Improved Seal Kits for Cylinder Liner Kits {1216}
2005/11/14

Caterpillar Parts SIS Catalog 920 :

CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
5S-6433 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-6433 CYLINDER HEAD AND VALVE MECHANISM
5S-6433 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-6433 CYLINDER HEAD AND VALVE MECHANISM
GLOW PLUG GP
5S-8500 GLOW PLUG GP
MUFFLER GP
7S-7736 MUFFLER GP
MANIFOLD
MANIFOLD
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
8S-3201 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
8S-3201 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
6A-6669 CYLINDER BLOCK AS
CRANKSHAFT
5S-6431 CRANKSHAFT

Truck sale:

Caterpillar 920-14, Wheel Loaders, Construction
185,300 
Caterpillar 920-14, Wheel Loaders, Construction
- Wheel Loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 920-14, Wheel Loaders, Construction
195,400 
Caterpillar 920-14, Wheel Loaders, Construction
- Wheel Loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 920-14, Wheel Loaders, Construction
167,200 
Caterpillar 920-14, Wheel Loaders, Construction
- Wheel Loaders
FOLEY EQUIPMENT COMPANY
 
97,749 
Caterpillar 920 V SL4, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 920, Wheel Loaders, Construction
161,000 
Caterpillar 920, Wheel Loaders, Construction
- Wheel Loaders
THOMPSON TRACTOR CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.