AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7S9333 GOVERNOR GROUP Part of 7S7859 Fuel Pump Housing and Governor Group shown on Page 31 920 WHEEL LOADER


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
FILTER GP-FUEL
PUMP GP-FUEL INJECTION
LINES GP-FUEL

WHEEL LOADER 920 WHEEL LOADER 41J
 920 WHEEL LOADER 41J00001-02576 (MACHINE) UEH0136S 920 41J   (1970)

FUEL SYSTEM

GOVERNOR GP
GASKET
7S-7859 GASKET
GOVERNOR GROUP
7S-9333 GOVERNOR GROUP
 

#UEH0136S0050
 

7S-9333: GOVERNOR GROUP

7S9333 GOVERNOR GROUP
Part of 7S7859 Fuel Pump Housing and Governor Group shown on Page 31
c158731 UEH0136S
7S9333 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4F-4585 [1] PLUG  
  8S-0134 [1] BEARING  
    (Parts of Housing Assem. 9S1735)
  8S-8950 [1] SCREW (Low Idle)  
  1B-2790 [3] BOLT (Plain)  
  6H-5636 [2] BOLT (Drilled)  
  9M-4690 C [1] PLUG  
  7S-8828 [1] COVER ASSEM.  
  4S-8513 [1] GASKET  
  5S-1221 [1] SPRING  
  7S-9331 [1] SCREW (High Idle)  
  2S-7316 [1] DOWEL  
    (Part of Cover Assem. 7S8828)
  1S-4741 [1] CYLINDER  
  9S-4468 [1] BOLT  
  2F-4159 [1] LOCK  
  9S-0798 [4] BEARING  
  9S-4671 [1] SEAL  
    (Parts of Housing Assem. 9S1735)
  9M-4789 [1] SHAFT  
  5S-5060 [1] WEIGHT ASSEM.  
  2S-0101 [2] WEIGHT  
  1S-5440 [2] DOWEL  
    (Parts of Weight Assem. 5S5060)
  9S-4673 [1] BAND ASSEM.  
  3K-0810 [1] RING  
  8M-8739 [1] BOLT  
  5S-9607 [1] NUT  
  8L-4155 [1] SCREW  
  8L-4154 [1] COLLAR  
  9M-4704 [1] SCREW  
  8H-9181 [1] SPRING  
  9M-6302 [2] WASHER  
  9M-6303 [1] SPRING  
  2S-0008 [1] SEAT  
  3S-9639 [1] SEAT ASSEM.  
  8M-8726 [1] DOWEL  
  2S-0007 [1] SLEEVE  
  7M-7219 [1] BEARING  
  8M-8993 [1] RING  
  7M-7193 [2] RACE  
  9M-1216 [1] PLUNGER  
  2S-7905 [1] PLUG  
    (Part of 9S1735 Assem.)
  1S-9312 [1] SPRING  
  9F-4522 [1] GASKET  
  2S-7289 C [1] COLLAR  
  2S-7235 C [1] SPRING  
  9S-4466 [1] LEVER ASSEM.  
  9M-9788 [1] PLUNGER  
  7M-7316 C [1] SPRING  
  5H-1351 [1] PIN  
  9S-1735 [1] HOUSING ASSEM.  
  8M-8403 [1] GUIDE  
    (Part of Housing Assem. 9S1735)
  7S-8447 [1] PISTON ASSEM.  
  7L-8777 [1] SLEEVE  
  7B-8105 [1] LOCK  
  8M-8997 [1] SEAL  
  0S-1615 [3] BOLT  
  9M-6293 [1] LOCK  
  C   INDICATES CHANGE
 

#UEH0136S0051
 

9S-3312: RACK STOP

RACK STOP (9S3312 N/S)--Type 1
c106207 UEH0136S
9S3312 RACK STOP Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. C [1] BAR  
2. [1] LOCK  
3. [2] BOLT  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEH0136S0052
 

9S-3312: RACK STOP

RACK STOP (9S3312 N/S)--Type 2
c113672 UEH0136S
9S3312 RACK STOP Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9062 C [1] RETAINER  
2. 1P-6452 C [1] INSULATOR  
3. 1P-6453 C [1] BAR  
4. 1P-9958 C [1] INSULATOR  
5. 8S-4317 C [1] CONTACT  
6. 9M-6292 [1] LOCK  
7. 4F-7957 C [2] BOLT  
  C   INDICATES CHANGE
 

#UEH0136S0053
 

7S-1251: FUEL PRIMING PUMP

FUEL PRIMING PUMP (7S1251 N/S)
9H2256 Pump parts are shown on Page 34
c101330 UEH0136S
7S1251 FUEL PRIMING PUMP Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9H-2256 Y [1] PUMP ASSEM.  
    (See Separate Illustration)
2. 8S-0210 [1] TUBE (Outlet 8.98" Long)  
3. 3B-8998 [3] FITTING  
4. 1F-1344 [3] NUT  
    (1 in each 3B8998 Fitting)
5. 1H-7922 [1] FITTING  
6. 1F-1344 [1] NUT  
    (Part of 1H7922 Fitting)
7. 8S-0211 [1] TUBE (Inlet 17.19" Long)  
8. 2B-2695 [2] BOLT  
9. 3B-4505 [2] LOCKWASHER  
10. 7S-1129 [1] BRACKET  
  Y   SEPARATE ILLUSTRATION
 

#UEH0136S0054
 

9H-2256: FUEL PRIMING PUMP ASSEMBLY

9H2256 FUEL PRIMING PUMP ASSEMBLY
Serial No. 41J1 to 1637, 1639 to 1650, 1652 to 1690, 1700, 1702, 1704, 1709,
1730 to 1733, 1735, 1736 and 41J1738 inclusive
Part of Fuel Priming Pump shown on Page 33
c107655 UEH0136S
9H2256 FUEL PRIMING PUMP ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-3820 C [1] ROD ASSEM.  
  1M-6782 [1] KNOB  
  1M-6783 [1] ROD  
  9S-3819 C [1] PIN (56" LONG)  
  2S-8145 [1] SEAL  
  1M-6784 [1] GUIDE  
  9S-3818 C [1] NUT  
  1M-6781 [3] NUT  
  1M-6735 [1] WASHER  
  9S-3817 C [1] SPRING  
  1M-6779 [1] BARREL  
  1M-6788 [1] NUT  
  1M-6786 [1] PIN  
  1H-1023 [2] RING  
  1M-6778 [1] BODY  
  1M-6780 [2] SPRING  
  1M-6718 [2] BALL  
  1M-6789 [2] RETAINER  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEH0136S0055
 

9H-2256: PUMP ASSEMBLY

9H2256 PUMP ASSEMBLY
Serial No. 41J1638, 1651, 1691 to 1699, 1701, 1703, 1705 to 1708, 1710 to
1729, 1734, 1737 and 41J1739--Up
Part of Fuel Priming Pump shown on Page 33
c145779 UEH0136S
9H2256 PUMP ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-6718 [2] BALL  
2. 1H-1023 [2] SEAL  
3. 1M-6781 [3] NUT  
 

#UEH0136S0056
 

7S-4430: FUEL TRANSFER PUMP GROUP

7S4430 FUEL TRANSFER PUMP GROUP
c112418 UEH0136S
7S4430 FUEL TRANSFER PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2F-8616 [1] NUT  
2. 8H-9806 [1] GEAR (11 Teeth-Drive)  
3. 3H-1489 [1] KEY  
4. 8S-4375 [1] CAGE ASSEM.  
5. 8F-6058 [1] BUSHING  
6. 4S-7756 [2] SEAL  
7. 6J-2419 [2] SEAL  
8. 7S-4439 [1] RING  
9. 7S-2374 [1] GASKET  
10. 7S-4434 [1] BODY ASSEM.  
11. 2S-6838 [1] SHAFT  
12. 8F-6058 [1] BUSHING  
13. 3B-4505 H [2] LOCKWASHER  
14. 4B-3388 H [2] BOLT  
15. 8S-4368 [1] GEAR (10 Teeth-Idler)  
16. 8S-5581 [1] COVER ASSEM.  
17. 8S-5575 [1] SEAL  
18. 7S-4433 [2] FERRULE  
19. 7H-3171 [1] PLUG  
20. 8M-0874 [1] PLUNGER ASSEM.  
21. 8M-3210 [1] SPRING  
22. 2A-1913 [1] GASKET  
23. 7S-4440 [1] BOLT  
24. 7S-6701 [2] SCREW (1.75" long)  
25. 9F-6641 [4] SCREW (1.25" long)  
26. 8S-4373 [1] SHAFT ASSEM. (10 Teeth-Drive)  
  H   NOT PART OF 7S4430 FUEL TRANSF
 

#UEH0136S0057
 

5S-9666: FUEL FILTER GROUP

5S9666 FUEL FILTER GROUP
c155237 UEH0136S
5S9666 FUEL FILTER GROUP Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1927 [1] NEEDLE ASSEM.  
2. 7F-3901 [1] SEAT  
3. 1H-9722 [1] PLUG  
4. 5S-9580 [1] BASE  
5. 9S-4167 [1] STUD  
6. 1P-2299 Y [1] FILTER ASSEM.  
7. 1B-9575 [3] BOLT  
  8F-7242 [8] WASHER  
8. 5S-9020 [1] GASKET  
9. 5S-6333 [1] ADAPTER  
10. 8H-9402 [1] ADAPTER  
11. 9H-4557 [2] SEAL  
12. 5S-9060 [1] GASKET  
13. 9F-2247 [1] PLUG  
14. 5M-6214 [3] PLUG  
15. 4B-3388 [2] BOLT 1.25 in.(28.58 mm) long  
16. 1D-4538 [3] BOLT 2.25 in.(57.15 mm) long  
  Y   SEPARATE ILLUSTRATION
 

#UEH0136S0058
 

7S-8831: FUEL PUMP HOUSING GROUP

7S8831 FUEL PUMP HOUSING GROUP
Part of Fuel Pump Housing and Governor shown on Page 31
c105895 UEH0136S
7S8831 FUEL PUMP HOUSING GROUP Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4M-0411 [4] BONNET  
  8H-9204 [4] WASHER  
  2M-4314 [4] BUSHING  
  9B-1363 [4] SPRING  
  9H-5746 [4] CHECK  
  1M-3506 [4] RING  
  9H-5797 [4] PLUNGER AND BARREL ASSEM.  
  1S-0206 [4] SPRING  
  9H-5729 [4] WASHER  
  3S-9735 [4] LIFTER ASSEM.  
  4M-1474 [2] PIN  
  4F-6024 [2] DOWEL  
  1S-1953 [1] BEARING  
    (Parts of Housing Assem. 7S8830
  8H-9208 [1] DOWEL  
    (Part of Gear Assem. 5S5058)
  1S-0214 [1] SPRING  
  2S-7905 [1] PLUG  
    (Part of Housing Assem. 7S8830)
  0L-0472 [1] BOLT  
  2H-3504 [1] LOCK  
  8H-9208 [1] DOWEL  
    (Part of Camshaft Assem. 8H9207)
  7M-5940 [1] PLATE  
  5S-5058 [1] GEAR ASSEM.  
    (66 Teeth)
  2A-3746 [1] PLUG  
  2M-8604 [1] BEARING  
  3D-4603 [1] PLUG  
    (Parts of Housing Assem. 7S8830)
  1M-1077 [4] SEAL  
  8M-3020 [4] DOWEL  
  8M-3019 [4] DOWEL  
    (Parts of Housing Assem. 7S8830)
  2M-4208 [4] SPACER (.174" Thick)  
  2M-4209 [4] SPACER (.178" Thick)  
  2M-4210 [4] SPACER (.182" Thick)  
  2M-4211 [4] SPACER (.186" Thick)  
  2M-4212 [4] SPACER (.190" Thick)  
  5M-2691 [4] SPACER (.194" Thick)  
  5M-2697 [4] SPACER (.170" Thick)  
  5S-7189 [4] SPACER (.198" Thick)  
    (Use as required)
  9H-1296 [1] BEARING  
    (Part of Housing Assem. 7S8830)
  2S-0825 [1] RACK  
  9H-1284 [1] BEARING  
    (Part of Housing Assem. 7S8830)
  1M-0690 [1] SLEEVE  
    (Part of Camshaft Assem. 8H9207)
  8H-9207 [1] CAMSHAFT ASSEM.  
  7S-8830 [1] HOUSING ASSEM.  
 

#UEH0136S0059
 

5S-9922: FUEL INJECTION VALVES AND LINES

FUEL INJECTION VALVES AND LINES (5S9922 N/S)
Serial No. 41J1 to 1882, 1887 to 1889, 1893, 1903, 1908 and 41J1916 inclusive
c114272 UEH0136S
5S9922 FUEL INJECTION VALVES AND LINES Parts scheme
  For full view, you need register

Parts for your 920 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-7214 [1] LINE ASSEM. (No. 4)  
2. 5S-7213 [1] LINE ASSEM. (No. 3)  
3. 5S-7212 [1] LINE ASSEM. (No. 2)  
4. 5S-7211 [1] LINE ASSEM. (No. 1)  
5. 5H-7225 [4] NUT  
6. 8S-2389 [4] BODY  
7. 8M-1584 [4] VALVE SERVICE GROUP  
8. 6F-1069 [1] SEAL ASSEM.  
9. 5B-3718 [1] SEAL  
10. 1P-9328 [1] FITTING  
11. 9S-1350 [1] CLIP  
12. 5S-7223 [1] TUBE  
13. 1A-2029 [1] BOLT (1.125" long)  
14. 3B-4506 [6] LOCKWASHER  
15. 8M-5248 [2] SEAL  
16. 0S-1588 [1] BOLT (1.25" long)  
17. 7S-6743 [1] BRACKET  
18. 5M-3154 [1] COVER  
  7H-3270 [1] GASKET  
19. 8M-5253 [1] SEAL  
20. 0S-1594 [2] BOLT (1" long)  
21. 0S-1573 [1] BOLT (4" long)  
  3B-4508 [1] LOCKWASHER  
22. 0S-1571 [1] BOLT (1.75" long)  
23. 8M-5260 [1] SEAL  
24. 0S-0509 [1] BOLT  
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Governor Housing<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Injection Pump Housing And Governor (Compact Fuel System)
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Fuel Injection Pump Housing And Governor (Sleeve Metering Fuel System)
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Fuel Injection Pump Housing And Governor (Compact Fuel System)
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Fuel Injection Pump Housing And Governor (Sleeve Metering Fuel System)
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Governor (Compact Fuel System)
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Governor (Sleeve Metering Fuel System)
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Fuel Injection Pumps (Sleeve Metering Fuel System)
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Fuel Transfer Pump (Compact Fuel System)
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Fuel Transfer Pump (Sleeve Metering Fuel System)
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog 920 :

GASKET
7S-7859 GASKET
SERVICE METER
9S-7993 SERVICE METER
SERVICE METER
9S-4137 SERVICE METER
SERVICE METER GROUP
2S-0422 SERVICE METER GROUP
GOVERNOR CONTROL
GOVERNOR CONTROL
AIR COMPRESSOR ASSEMBLY
1P-0028 AIR COMPRESSOR ASSEMBLY
AIR COMPRESSOR ASSEMBLY
9S-9742 AIR COMPRESSOR ASSEMBLY
AIR COMPRESSOR ASSEMBLY
8S-4637 AIR COMPRESSOR ASSEMBLY
RACK STOP
9S-3312 RACK STOP
RACK STOP
9S-3312 RACK STOP
FUEL PRIMING PUMP
7S-1251 FUEL PRIMING PUMP
FUEL PRIMING PUMP ASSEMBLY
9H-2256 FUEL PRIMING PUMP ASSEMBLY
PUMP ASSEMBLY
9H-2256 PUMP ASSEMBLY
FUEL TRANSFER PUMP GROUP
7S-4430 FUEL TRANSFER PUMP GROUP
FUEL FILTER GROUP
5S-9666 FUEL FILTER GROUP
FUEL PUMP HOUSING GROUP
7S-8831 FUEL PUMP HOUSING GROUP

Truck sale:

Caterpillar 920-14, Wheel Loaders, Construction
185,300 
Caterpillar 920-14, Wheel Loaders, Construction
- Wheel Loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 920-14, Wheel Loaders, Construction
195,400 
Caterpillar 920-14, Wheel Loaders, Construction
- Wheel Loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 920-14, Wheel Loaders, Construction
167,200 
Caterpillar 920-14, Wheel Loaders, Construction
- Wheel Loaders
FOLEY EQUIPMENT COMPANY
 
97,749 
Caterpillar 920 V SL4, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 920, Wheel Loaders, Construction
161,000 
Caterpillar 920, Wheel Loaders, Construction
- Wheel Loaders
THOMPSON TRACTOR CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.