AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5J5389 TILT CYLINDER GROUP--R.H.--6.00" Bore x 27.40" Stroke 5J5390 TILT CYLINDER GROUP--L.H.--6.00" Bore x 27.40" Stroke Serial No. 48J1 to 48J583 inclusive 977K


HYDRAULIC SYSTEM
CYLINDER GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
HYDRAULIC SYSTEM
CYLINDER GP
ELECTRICAL AND STARTING SYSTEM
STARTING AR

TRACK LOADER 977K TRACK LOADER 48J
 977K TRAXCAVATOR 48J00001-00585 (MACHINE) UEH0138S 977K 48J   (1968)

HYDRAULIC SYSTEM

CYLINDER GP
LIFT CYLINDER GROUP
7J-1936 LIFT CYLINDER GROUP
LIFT CYLINDER GROUP
7J-9376 LIFT CYLINDER GROUP
5J-5389 TILT CYLINDER GROUP--R.H.,TILT CYLINDER GROUP--L.H.
TILT CYLINDER GROUP--R.H.,TILT CYLINDER GROUP--L.H.
5J-5390 TILT CYLINDER GROUP--R.H.,TILT CYLINDER GROUP--L.H.
TILT CYLINDER GROUP
7J-9645 TILT CYLINDER GROUP
TILT CYLINDER GROUP
7J-9646 TILT CYLINDER GROUP
 

#UEH0138S0230
 

5J-5389: TILT CYLINDER GROUP--R.H.,TILT CYLINDER GROUP--L.H.

5J5389 TILT CYLINDER GROUP--R.H.--6.00" Bore x 27.40" Stroke
5J5390 TILT CYLINDER GROUP--L.H.--6.00" Bore x 27.40" Stroke
Serial No. 48J1 to 48J583 inclusive
c125795 UEH0138S
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-5387 [1] CYLINDER ASSEM. (Right Hand)  
    (Part of 5J5389 Cylinder Group)
  5J-5388 [1] CYLINDER ASSEM. (Left Hand)  
    (Part of 5J5390 Cylinder Group)
  1F-0748 [1] NUT  
2. 5J-5973 [1] BEARING  
    (Parts of 5J5387 and 5J5388 Cylinder Assem.)
3. 3J-6899 [1] NUT  
4. 5J-5056 [1] PISTON  
5. 1D-4610 [6] BOLT  
6. 5H-1504 [8] WASHER  
7. 5J-8275 [1] SEAL  
8. 1J-3540 [1] SEAL  
9. 5J-9771 [1] ROD ASSEM.  
10. 3K-5242 [1] BEARING  
    (Part of 5J9771 Rod Assem.)
11. 3B-2968 [2] BOLT  
12. 5J-4989 [2] SEAL ASSEM.  
13. 1J-0708 [1] RING  
14. 2B-7408 [1] PLUG  
15. 5H-3252 [1] SEAL  
16. 2K-3258 [1] RING  
17. 6J-7591 C [1] HEAD  
18. 6J-6553 C [1] SEAL  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEH0138S0231
 

5J-5390: TILT CYLINDER GROUP--R.H.,TILT CYLINDER GROUP--L.H.

5J5389 TILT CYLINDER GROUP--R.H.--6.00" Bore x 27.40" Stroke
5J5390 TILT CYLINDER GROUP--L.H.--6.00" Bore x 27.40" Stroke
Serial No. 48J1 to 48J583 inclusive
c125795 UEH0138S
5J5390 TILT CYLINDER GROUP--R.H.,TILT CYLINDER GROUP--L.H. Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-5387 [1] CYLINDER ASSEM. (Right Hand)  
    (Part of 5J5389 Cylinder Group)
  5J-5388 [1] CYLINDER ASSEM. (Left Hand)  
    (Part of 5J5390 Cylinder Group)
  1F-0748 [1] NUT  
2. 5J-5973 [1] BEARING  
    (Parts of 5J5387 and 5J5388 Cylinder Assem.)
3. 3J-6899 [1] NUT  
4. 5J-5056 [1] PISTON  
5. 1D-4610 [6] BOLT  
6. 5H-1504 [8] WASHER  
7. 5J-8275 [1] SEAL  
8. 1J-3540 [1] SEAL  
9. 5J-9771 [1] ROD ASSEM.  
10. 3K-5242 [1] BEARING  
    (Part of 5J9771 Rod Assem.)
11. 3B-2968 [2] BOLT  
12. 5J-4989 [2] SEAL ASSEM.  
13. 1J-0708 [1] RING  
14. 2B-7408 [1] PLUG  
15. 5H-3252 [1] SEAL  
16. 2K-3258 [1] RING  
17. 6J-7591 C [1] HEAD  
18. 6J-6553 C [1] SEAL  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEH0138S0232
 

7J-9645: TILT CYLINDER GROUP

7J9645 TILT CYLINDER GROUP (7K9387 N/S)--R.H.--6.00" Bore x 27.40" Stroke
Serial No. 48J584-Up
c147785 UEH0138S
7J9645 TILT CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7408 [1] PLUG  
2. 7J-9643 [1] CYLINDER ASSEM.  
    (Includes)
3. 1F-0748 [1] NUT  
4. 7J-9346 [1] BEARING  
5. 3J-6899 [1] NUT  
6. 1J-0708 [1] RING  
7. 5J-4989 [2] SEAL ASSEM.  
8. 5J-5056 [1] PISTON  
9. 5H-3252 [1] SEAL  
10. 2K-3258 [1] RING  
11. 6J-7591 [1] HEAD  
12. 6J-6553 [1] SEAL  
13. 5J-8275 [1] SEAL  
14. 1J-3540 [1] SEAL  
15. 7J-9377 R [1] ROD ASSEM.  
    (Includes)
16. 7J-9346 [1] BEARING  
17. 5P-0064 H [4] SEAL  
18. 3B-2968 [2] BOLT  
19. 1D-4610 [6] BOLT  
20. 5H-1504 [8] WASHER  
  H   NOT PART OF 7J9645 CYLINDER GR
  R   REMFG PART MAY BE AVAILABLE
 

#UEH0138S0233
 

7J-9646: TILT CYLINDER GROUP

7J9646 TILT CYLINDER GROUP (7K9388 N/S)--L.H.--6.00" Bore x 27.40" Stroke
Serial No. 48J584-Up
c147782 UEH0138S
7J9646 TILT CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7408 [1] PLUG  
2. 7J-9644 [1] CYLINDER ASSEM.  
    (Includes)
3. 1F-0748 [1] NUT  
4. 7J-9346 [1] BEARING  
5. 3J-6899 [1] NUT  
6. 1J-0708 [1] RING  
7. 5J-4989 [2] SEAL ASSEM.  
8. 5J-5056 [1] PISTON  
9. 5H-3252 [1] SEAL  
10. 2K-3258 [1] RING  
11. 6J-6553 [1] SEAL  
12. 6J-7591 [1] HEAD  
13. 3B-2968 [2] BOLT  
14. 1J-3540 [1] SEAL  
15. 7J-9648 R [1] ROD ASSEM.  
    (Includes)
16. 7J-9346 [1] BEARING  
17. 5P-0064 H [4] SEAL  
18. 5J-8275 [1] SEAL  
19. 1D-4610 [6] BOLT  
20. 5H-1504 [8] WASHER  
  H   NOT PART OF 7J9646 CYLINDER GR
  R   REMFG PART MAY BE AVAILABLE
 

#UEH0138S0234
 

8S-8780: ALTERNATOR ARRANGEMENT

8S8780 ALTERNATOR ARRANGEMENT--24 Volt, 50 Ampere
UEH0138S0234 UEH0138S
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8S-6554 Y [1] ALTERNATOR GROUP  
  8M-7892 [1] AMMETER  
  9S-0173 [1] CIRCUIT BREAKER  
  1P-5391 [1] ALTERNATOR WIRING GROUP  
  1P-0972 Y [1] WIRING HARNESS ASSEMBLY  
  1P-0973 Y [1] WIRING HARNESS ASSEMBLY  
  8M-7892 [1] AMMETER  
  9S-0173 [1] CIRCUIT BREAKER  
  Y   SEPARATE ILLUSTRATION
 

#UEH0138S0235
 

8S-6554: ALTERNATOR GROUP

8S6554 ALTERNATOR GROUP--24 Volt, 50 Ampere
Part of 8S8780 Alternator Arrangement
5S9088 Alternator parts are shown on Pages 122D & 122E
c132922 UEH0138S
8S6554 ALTERNATOR GROUP Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-9088 RY [1] ALTERNATOR ASSEM.  
    (See Separate Illustration)
2. 5M-6214 [1] PLUG  
3. 1H-6936 [1] WIRE ASSEM.  
4. 9F-9353 [1] TERMINAL (.38" Screw)  
  9F-5320 [1] TERMINAL (.25" Screw)  
  8B-0653 [2] INSULATOR  
5. 9S-6129 [1] PULLEY  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#UEH0138S0236
 

5S-9088: ALTERNATOR GP-CHARGING

5S9088 ALTERNATOR ASSEMBLY--24 Volt, 50 Ampere--Part 1 of 2
Part of 8S6554 Alternator Group shown on Page 122C
c202886 UEH0138S
5S9088 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-2260 [1] PLATE  
2. 9S-2544 [4] SCREW  
3. 8H-0878 [6] LOCKWASHER  
4. 9S-2438 [2] SCREW  
5. 7H-2079 [7] LOCKWASHER  
6. 9S-2255 [1] COVER  
7. 9S-2262 [1] GASKET  
8. 9S-2246 [1] LEAD ASSEM.  
9. 9S-9830 [1] SCREW  
10. 8F-1326 [3] WASHER  
11. 9B-7233 [3] LOCKWASHER (Shake Proof)  
12. 9S-9829 [1] SCREW ASSEM.  
13. 4B-2043 [4] NUT  
14. 9S-2259 [1] REGULATOR  
15. 9S-2250 [1] GROMMET  
16. 9S-2011 [1] SCREW  
17. 1L-4789 [1] LOCKWASHER  
18. 9S-2389 [1] STUD ASSEM.  
19. 9S-2398 [1] HOUSING ASSEM.  
20. 9S-2393 [3] DIODE  
21. 9S-2397 [1] COVER  
22. 9F-2247 [1] PLUG  
23. 9S-2395 [1] BEARING  
24. 9S-2394 [1] SEAL  
25. 9S-2396 [1] BUSHING  
26. 9S-2007 [3] SCREW  
27. 9S-2301 [1] INSULATION  
28. 9S-2292 [1] HEAT SINK ASSEM.  
29. 9S-2300 [4] INSULATOR  
30. 9S-9830 C [4] SCREW  
  9S-2247 [4] WASHER (Spring)  
  4B-4863 [4] WASHER (Plain)  
31. 9S-2542 [1] SCREW  
32. 9S-2437 [5] SCREW  
  9S-2013 H [1] KIT (Terminal Relay)  
    (Consists of Bushing, "O" Ring & Hardware)
  9S-2012 H [1] KIT (Terminal Output)  
    (Consists of Gaskets, Terminal & Hardware)
  9S-2290 H [1] KIT (Heat Sink)  
    (Diode Junction Hardware)
  9S-2291 H [1] KIT (Heat Sink)  
    (Positive Diode Hardware)
  C   INDICATES CHANGE
  H   NOT PART OF 5S9088 ALTERNATOR
 

#UEH0138S0237
 

5S-9088: ALTERNATOR GP-CHARGING

5S9088 ALTERNATOR ASSEMBLY--24 Volt, 50 Ampere--Part 2 of 2
Part of 8S6554 Alternator Group shown on Page 122C
c107769 UEH0138S
5S9088 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-2398 [1] HOUSING ASSEM.  
2. 9S-2397 [1] COVER  
3. 9S-2395 [1] BEARING  
4. 9S-2394 [1] SEAL  
5. 9F-2247 [1] PLUG  
6. 9S-2393 [3] DIODE  
7. 9S-2396 [1] BUSHING  
    (Parts of 9S2398 Assem.)
8. 4B-2043 C [1] NUT  
9. 9B-7233 C [3] LOCKWASHER (Shakeproof)  
  9S-9830 C [2] SCREW  
10. 8H-0878 C [2] LOCKWASHER  
  8F-1326 C [3] WASHER  
11. 9S-9829 C [1] SCREW ASSEM.  
12. 9S-2438 [2] SCREW  
13. 7H-2079 [2] LOCKWASHER  
14. 9S-2389 [1] STUD ASSEM.  
15. 9S-2292 [1] HEAT SINK ASSEM.  
16. 4B-2043 [3] NUT  
17. 9S-2246 [1] LEAD ASSEM.  
18. 9S-2542 [1] SCREW  
19. 9S-2250 [1] GROMMET  
  9S-2013 H [1] KIT (Terminal Relay)  
    (Consists of such parts as Bushing, "O" RING AND HARDWARE)
  9S-2012 H [1] KIT (Terminal Output)  
    (Consists of such parts as Gaskets, TERMINAL, AND HARDWARE)
  9S-2290 H [1] KIT (For Heat Sink)  
    (Diode Junction Hardware)
  9S-2291 H [1] KIT (For Heat Sink)  
    (Positive Diode Heat Sink Hardware)
  C   INDICATES CHANGE FROM PREVIOUS
  H   NOT PART OF 5S9088 ALTERNATOR
 

#UEH0138S0238
 

7K-0110: LIFT CYLINDER MOUNTING

LIFT CYLINDER MOUNTING (7K110 N/S)
Serial No. 48J1 to 48J583 inclusive
Also part of 9S6233 Steel Mill Arrangement listed on Page 156B
c113493 UEH0138S
7K0110 LIFT CYLINDER MOUNTING Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] PLATE  
2. [4] FITTING  
3. [2] RETAINER ASSEM.  
4. [1] BEARING  
5. [32] BOLT  
6. [32] LOCKWASHER  
7. [2] HOSE ASSEM. (14" long overall)  
8. [2] UNION  
9. [2] RETAINER ASSEM.  
10. [1] BEARING  
11. C [4] PLUG  
  C   INDICATES CHANGE
 

#UEH0138S0239
 

8S-3884: DIRECT ELECTRIC STARTING ARRANGEMENT

8S3884 DIRECT ELECTRIC STARTING ARRANGEMENT--24 Volt
For use in Temperatures of 0 degree Fahrenheit or below
UEH0138S0239 UEH0138S
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8S-3886 Y [1] STARTING MOTOR GROUP  
  8S-1507 Y [1] GENERATOR GROUP  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders
977 TRACK-TYPE LOADER HYDRAULIC SYSTEM
Lift Cylinders<BR> (7K9385, 7K9386)
977L TRACK-TYPE LOADER HYDRAULIC SYSTEM
Tilt Cylinders<BR> (3P6137, 3P6138)
977L TRACK-TYPE LOADER HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Multipurpose Bucket Cylinders
977L TRACK-TYPE LOADER VEHICLE SYSTEMS
Tilt Cylinders
977L TRACK-TYPE LOADER VEHICLE SYSTEMS
Lift Cylinders
977L TRACK-TYPE LOADER VEHICLE SYSTEMS
Service Magazine
New Lift Cylinder Assemblies {5102}
1983/04/18
Use New Drift Rate Chart When Testing And Troubleshooting Cylinder Drift In Hydraulic Circuits{5050,5100}
1979/04/02
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 977K :

LIFT CYLINDER GROUP
7J-9376 LIFT CYLINDER GROUP
LIFT CYLINDER GROUP
7J-1936 LIFT CYLINDER GROUP
LIFT CYLINDER GROUP
7J-9375 LIFT CYLINDER GROUP
LIFT CYLINDER GROUP
7J-1935 LIFT CYLINDER GROUP
LIFT CYLINDER LINES
LIFT CYLINDER LINES
LIFT CYLINDER LINES
TILT CYLINDER LINES
TILT CYLINDER LINES
TILT CYLINDER LINES
TILT CYLINDER LINES
TILT CYLINDER GROUP--R.H.,TILT CYLINDER GROUP--L.H.
5J-5390 TILT CYLINDER GROUP--R.H.,TILT CYLINDER GROUP--L.H.
TILT CYLINDER GROUP
7J-9645 TILT CYLINDER GROUP
TILT CYLINDER GROUP
7J-9646 TILT CYLINDER GROUP
8S-8780 ALTERNATOR ARRANGEMENT
ALTERNATOR GROUP
8S-6554 ALTERNATOR GROUP
ALTERNATOR GP-CHARGING
5S-9088 ALTERNATOR GP-CHARGING
5S-9088 ALTERNATOR GP-CHARGING
LIFT CYLINDER MOUNTING
7K-0110 LIFT CYLINDER MOUNTING

Truck sale:

Caterpillar 977K, Construction
10,250 USD 
Caterpillar 977K, Construction
- track loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 977K, Construction
9,500 
Caterpillar 977K, Construction
- track loaders
MICHIGAN CAT
CATERPILLAR 977K 1969
 
CATERPILLAR 977K 1969
- TRACK LOADERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
3508 - 1974 CAT 977K
 
3508 - 1974 CAT 977K

avspare
1970 CAT 977K
USD $9,500 
1970 CAT 977K

WEACO EQUIPMENT
Womelsdorf, Pennsylvania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.