AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

FRONT AND REAR DIFFERENTIAL AND CARRIER (8K6512 N/S & 8K6513 N/S)--2 Required Serial No. 14R133-Up Refer also to Page 127 for special parts 814


POWER TRAIN
DIFFERENTIAL & BEVEL GEAR GP
AXLE GP
BRAKING SYSTEM
BRAKE GP
FRAME AND BODY
FRAME GP

WHEEL DOZER 814 WHEEL DOZER 14R
 814 TRACTOR 14R00001-00149 (MACHINE) UEH0318S 814 14R   (1971)

POWER TRAIN

DIFFERENTIAL & BEVEL GEAR GP
FRONT AND REAR DIFFERENTIAL AND CARRIER
6K-5314 FRONT AND REAR DIFFERENTIAL AND CARRIER
DIFFERENTIAL & BEVEL GEAR GP
8K-6512 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
8K-6512 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GROUP
5K-4246 DIFFERENTIAL GROUP
DIFFERENTIAL GROUP
8K-6507 DIFFERENTIAL GROUP
DIFFERENTIAL GROUP
9K-5654 DIFFERENTIAL GROUP
DIFFERENTIAL GROUP
9K-5654 DIFFERENTIAL GROUP
 

#UEH0318S0130
 

8K-6512: DIFFERENTIAL & BEVEL GEAR GP

FRONT AND REAR DIFFERENTIAL AND CARRIER (8K6512 N/S & 8K6513 N/S)--2 Required
Serial No. 14R133-Up
Refer also to Page 127 for special parts
c149479 UEH0318S
8K6512 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 814 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1589 [10] BOLT (1.75" LONG)  
  1A-8537 [2] BOLT (2.75" LONG)  
  3B-4510 [12] LOCKWASHER  
  4H-6520 [1] SEAL  
  1J-2860 [1] CUP  
  2K-5103 [1] CONE  
  4K-6212 [1] SHAFT (12 TEETH)  
  2D-9455 [1] CONE  
  2D-9454 [1] CUP  
  4H-7859 [2] NUT  
  1B-6161 [1] LOCK  
  1A-2029 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  5K-2595 [1] SEAL  
  4K-9598 [1] RETAINER  
  2K-5109 [1] GASKET  
  5K-3078 [1] HOUSING  
  1A-1135 [12] BOLT  
  3B-4510 [12] LOCKWASHER  
  5J-3941 [1] PIN  
  2K-5106 [1] SHIM  
  5K-7828 [1] CARRIER ASSEM.  
  6A-7277 C [2] GEAR (16 teeth)  
  3K-1852 [1] RING  
  2B-7557 [4] CORK  
  2K-0535 [2] NUT  
  2K-0537 [2] LOCK  
  2K-5097 [2] CONE  
  1H-5338 [2] CUP  
  5K-8245 [2] BOLT  
  4S-8775 H [52IN.] LOCKWIRE  
  2K-5161 [12] BOLT  
    (Part of 8K7581 Assem.)
  4K-7502 [12] BOLT  
  4K-2287 [12] WASHER  
  5H-6371 C [6] LOCK  
  8K-6630 [3] DOWEL  
  9K-3413 C [1] GEAR (43 Teeth)  
  2K-5060 [4] WASHER  
  3K-8702 [1] SPIDER  
  6A-8703 C [4] GEAR (9 teeth)  
  1B-4441 [12] NUT  
    (Part of 8K7581 Assem.)
  3B-4611 [12] COTTER PIN  
  7K-9048 [2] WASHER  
  8K-7581 [1] CASE ASSEM.  
  2K-0527 [4] BOLT  
    (Part of 5K7828 Assem.)
  C   INDICATES CHANGE
  H   ORDER BY THE FOOT
 

#UEH0318S0131
 

4K-6137: FINAL DRIVE AND WHEEL

FINAL DRIVE AND WHEEL (4K6137 N/S)--4 Required
Serial No. 14R1 to 14R117 inclusive
c110432 UEH0318S
4K6137 FINAL DRIVE AND WHEEL Parts scheme
  For full view, you need register

Parts for your 814 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-6736 [1] DRUM  
  4K-6737 [1] GEAR (64 TEETH)  
  4K-6765 [1] WHEEL ASSEM.  
  2K-5069 [1] CUP  
  2K-5066 [1] CONE  
  4K-6800 [1] RETAINER ASSEM.  
  2A-3348 [3] DOWEL  
    (PART OF RETAINER ASSEM. 4K6800)
  4K-6810 [1] RETAINER  
  5M-1176 R [1] SEAL GROUP  
  2K-5073 [1] BUSHING  
    (PART OF HUB ASSEM. 7K7433)
  7K-7433 C [1] HUB ASSEM.  
  9S-6575 C [1] CONE  
  2K-5067 [1] CUP  
  2K-2939 [1] SEAL  
  2M-0344 [2] SEAL  
    (PART OF SEAL GROUP 5M1176)
  4K-6804 [1] SEAL  
  3B-1915 [4] BOLT  
  2H-3504 [4] LOCK  
  4K-7342 [4] BAR  
  0T-0102 [8] BOLT  
  0L-0796 [4] LOCK  
  2K-5127 [4] PLATE  
  4K-6754 [16] BOLT  
    (PART OF WHEEL ASSEM. 4K6765)
  1A-1135 [16] BOLT  
  2A-3710 [8] LOCK  
  0S-1589 [16] BOLT  
  3B-4510 [16] LOCKWASHER  
  7K-1848 C [1] CARRIER  
  2B-7557 [2] CORK  
  0S-1585 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
  2K-5133 [1] NUT  
  4K-4288 [1] WASHER  
  6K-4554 [1] GEAR (17 TEETH)  
  2K-0723 [1] RING  
  2D-0604 [1] BUTTON  
    (PART OF COVER ASSEM. 5K5933)
  9S-4181 C [1] PLUG  
  7M-8485 C [1] SEAL  
  3K-7020 [3] GEAR (23 TEETH)  
  7K-1840 C [6] WASHER (STEEL)  
  4K-6806 [3] SHAFT  
  4K-6801 [3] RING  
  5K-5933 [1] COVER ASSEM.  
  2L-3650 [1] PIN  
  7K-1839 C [6] WASHER (BRONZE)  
  6K-0356 [1] SEAL  
  5K-8245 [4] BOLT  
  4S-8775 C [2 FEET] LOCKWIRE  
  5K-8247 [1] LOCK  
  4M-3915 [6] BEARING ASSEM.  
  6K-0358 [1] SEAL  
  5K-1555 [1] PLUG  
  4K-8476 [1] GASKET  
  8F-3469 [1] SEAL  
  C   INDICATES CHANGE FROM PREVIOUS
  R   REMFG PART MAY BE AVAILABLE
 

#UEH0318S0132
 

8K-6467: WHEEL & FINAL DRIVE GP

FINAL DRIVE AND WHEEL (8K6467 N/S)--4 Required
Serial No. 14R118 to 14R132 inclusive
c145986 UEH0318S
8K6467 WHEEL & FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 814 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-6736 [1] DRUM  
  4K-6737 [1] GEAR (64 TEETH)  
  8K-6953 [1] WHEEL ASSEM.  
  2K-5069 [1] CUP  
  2K-5066 [1] CONE  
  4K-6810 [1] RETAINER  
  5M-1176 R [1] SEAL GROUP  
  2K-5073 [1] BUSHING  
    (PART OF HUB ASSEM 7K7433)
  7K-7433 [1] HUB ASSEM.  
    (64 TEETH)
  9S-6575 [1] CONE  
  2K-5067 [1] CUP  
  2M-0344 [2] SEAL  
    (PART OF SEAL GROUP 5M1176)
  4K-6804 [1] SEAL  
  3B-1915 [4] BOLT  
  2H-3504 [4] LOCK  
  4K-7342 [4] BAR  
  0T-0102 [8] BOLT  
  0L-0796 [4] LOCK  
  2K-5127 [4] PLATE  
  4K-6754 [16] BOLT  
    (PART OF WHEEL ASSEM. 8K6953)
  1A-1135 [16] BOLT  
  2A-3710 [8] LOCK  
  0S-1589 [16] BOLT  
  3B-4510 [16] LOCKWASHER  
  7K-1848 [1] CARRIER  
  2B-7557 [2] CORK  
  0S-1585 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
  2K-5133 [1] NUT  
  8K-6019 [1] WASHER  
  6A-8678 [1] GEAR (17 TEETH)  
  8K-6464 [1] RING  
  2D-0604 [1] BUTTON  
    (PART OF COVER ASSEM. 5K5933)
  9S-4181 [1] PLUG  
  7M-8485 [1] SEAL  
  3K-7020 [3] GEAR (23 TEETH)  
  7K-1840 [6] WASHER (STEEL)  
  4K-6806 [3] SHAFT  
  4K-6801 [3] RING  
  5K-5933 [1] COVER ASSEM.  
  2L-3650 [1] PIN  
  7K-1839 [6] WASHER (BRONZE)  
  6K-0356 [1] SEAL  
  5K-8245 [4] BOLT  
  4S-8775 [2 FEET] LOCKWIRE  
  5K-8247 [1] LOCK  
  4M-3915 [6] BEARING ASSEM.  
  6K-0358 [1] SEAL  
  5K-1555 [1] PLUG  
  4K-8476 [1] GASKET  
  8F-3469 [1] SEAL  
  R   REMFG PART MAY BE AVAILABLE
 

#UEH0318S0133
 

8K-6467: WHEEL & FINAL DRIVE GP

FINAL DRIVE AND WHEEL (8K6467 N/S)--4 Required
Serial No. 14R133-Up
c149799 UEH0318S
8K6467 WHEEL & FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 814 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-6736 [1] DRUM  
  9K-1773 C [1] GEAR (64 TEETH)  
  8K-6953 [1] WHEEL ASSEM.  
  2K-5069 [1] CUP  
  2K-5066 [1] CONE  
  4K-6810 [1] RETAINER  
  5M-1176 R [1] SEAL GROUP  
  2K-5073 [1] BUSHING  
    (PART OF HUB ASSEM. 9K2300)
  9K-2300 C [1] HUB ASSEM  
    (64 TEETH)
  9S-6575 [1] CONE  
  2K-5067 [1] CUP  
  2M-0344 [2] SEAL  
    (PART OF SEAL GROUP 5M1176)
  4K-6804 [1] SEAL  
  3B-1915 [4] BOLT  
  2H-3504 [4] LOCK  
  4K-7342 [4] BAR  
  0T-0102 [8] BOLT  
  0L-0796 [4] LOCK  
  2K-5127 [4] PLATE  
  4K-6754 [16] BOLT  
    (PART OF WHEEL ASSEM 8K6953)
  1A-1135 [16] BOLT  
  2A-3710 [8] LOCK  
  0S-1589 [16] BOLT  
  3B-4510 [16] LOCKWASHER  
  9K-1759 C [1] CARRIER  
  2B-7557 [2] CORK  
  0S-1585 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
  2K-5133 [1] NUT  
  8K-6019 [1] WASHER  
  8K-6282 C [1] GEAR (17 TEETH)  
  8K-6464 [1] RING  
  2D-0604 [1] BUTTON  
    (PART OF COVER ASSEM. 5K5933)
  9S-4181 [1] PLUG  
  7M-8485 [1] SEAL  
  9K-1758 C [3] GEAR (23 TEETH)  
  7K-1840 [6] WASHER (STEEL)  
  9K-1749 C [3] SHAFT  
  4K-6801 [3] RING  
  5K-5933 [1] COVER ASSEM.  
  2L-3650 [1] PIN  
  7K-1839 [6] WASHER (BRONZE)  
  6K-0356 [1] SEAL  
  5K-8245 [4] BOLT  
  4S-8775 [2 FEET] LOCKWIRE  
  5K-8247 [1] LOCK  
  5M-0578 C [6] BEARING ASSEM.  
  6K-0358 [1] SEAL  
  5K-1555 [1] PLUG  
  4K-8476 [1] GASKET  
  8F-3469 [1] SEAL  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#UEH0318S0134
 

4K-6139: REAR BRAKE AND AXLE

REAR BRAKE AND AXLE (4K6139 N/S)
Serial No. 14R1 to 14R117 inclusive
5K4984 Brake parts are shown on Page 81
c112745 UEH0318S
4K6139 REAR BRAKE AND AXLE Parts scheme
  For full view, you need register

Parts for your 814 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-6330 [1] HOUSING  
  6B-2731 [1] PLUG  
  8B-3410 [1] GASKET  
  6K-8921 [2] AXLE  
  0S-1589 [10] BOLT  
  3B-4510 [10] LOCKWASHER  
  1K-8059 [1] PIN  
  3H-4190 [1] PLUG  
  6B-9186 [1] GASKET  
  7K-0686 [1] TRUNNION  
  4F-7388 [1] SEAL  
  4K-6807 [32] BOLT  
  6B-6682 [32] NUT  
  3B-4512 [32] LOCKWASHER  
  6K-4497 [1] BRACKET ASSEM.  
    (RIGHT HAND)
  6K-4498 [1] BRACKET ASSEM.  
    (LEFT HAND)
  5K-4985 [1] CAMSHAFT  
    (RIGHT HAND)
  5K-4986 [1] CAMSHAFT  
    (LEFT HAND)
  1L-1426 [2] RING  
  1M-0157 [2] WASHER  
  6K-4487 [2] BEARING  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  5K-0663 [2] SLEEVE  
  3B-8485 [2] FITTING  
  0S-0509 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  4B-4278 [12] WASHER  
  4K-6735 [2] COVER (UPPER)  
  4K-6388 [2] SPINDLE  
  5H-3252 [2] SEAL  
  5K-2763 [2] WASHER  
  5K-4984 Y [2] BRAKE ASSEM.  
    (SEE SEPARATE ILLUSTRATION)
  4K-6734 [2] COVER (LOWER)  
  Y   SEPARATE ILLUSTRATION
 

#UEH0318S0135
 

8K-6511: BRAKE & AXLE GP-REAR

REAR BRAKE AND AXLE (8K6511 N/S)
Serial No. 14R118-Up
5K4984 Brake parts are shown on Page 81
c140051 UEH0318S
8K6511 BRAKE & AXLE GP-REAR Parts scheme
  For full view, you need register

Parts for your 814 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-6330 [1] HOUSING  
  6B-2731 [1] PLUG  
  6A-3785 [1] GASKET  
  8K-6285 [2] AXLE  
  0S-1589 [10] BOLT  
  3B-4510 [10] LOCKWASHER  
  5J-3941 [1] PIN  
  3H-4190 [1] PLUG  
  6A-3845 [1] GASKET  
  7K-0686 [1] TRUNNION  
  4F-7388 [1] SEAL  
  4K-6807 [32] BOLT  
  6B-6682 [32] NUT  
  3B-4512 [32] LOCKWASHER  
  6K-4497 [1] BRACKET ASSEM.  
    (RIGHT HAND)
  6K-4498 [1] BRACKET ASSEM.  
    (LEFT HAND)
  5K-4985 [1] CAMSHAFT  
    (RIGHT HAND)
  5K-4986 [1] CAMSHAFT  
    (LEFT HAND)
  1L-1426 [2] RING  
  1M-0157 [2] WASHER  
  6K-4487 [2] BEARING  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  3B-8485 [2] FITTING  
  0S-0509 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  4B-4278 [12] WASHER  
  4K-6735 [2] COVER (UPPER)  
  4K-6388 [2] SPINDLE  
  5H-3252 [2] SEAL  
  5K-2763 [2] WASHER  
  5K-0663 [1] SLEEVE  
  5K-4984 Y [2] BRAKE ASSEM.  
    (SEPARATE ILLUSTRATION)
  4K-6734 [2] COVER (LOWER)  
  Y   SEPARATE ILLUSTRATION
 

#UEH0318S0136
 

4K-6135: FRONT BRAKE AND AXLE

FRONT BRAKE AND AXLE (4K6135 N/S)
Serial No. 14R1 to 14R117 inclusive
5K4984 Brake parts are shown on Page 81
c134883 UEH0318S
4K6135 FRONT BRAKE AND AXLE Parts scheme
  For full view, you need register

Parts for your 814 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6K-8921 [2] AXLE  
  6B-2731 [1] PLUG  
  8B-3410 [1] GASKET  
  3H-4190 [1] PLUG  
  6B-9186 [1] GASKET  
  1K-8059 [1] PIN  
  4K-6331 [1] HOUSING  
  4K-6807 [32] BOLT  
  6B-6682 [32] NUT  
  3B-4512 [32] LOCKWASHER  
  6K-4497 [1] BRACKET ASSEM.  
    (RIGHT HAND)
  6K-4498 [1] BRACKET ASSEM.  
    (LEFT HAND)
  5K-4985 [1] CAMSHAFT  
    (RIGHT HAND)
  5K-4986 [1] CAMSHAFT  
    (LEFT HAND)
  1L-1426 [2] RING  
  1M-0157 [2] WASHER  
  6K-4487 [2] BEARING  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  3B-8485 [2] FITTING  
  0S-0509 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  4B-4278 [12] WASHER  
  4K-6735 [2] COVER (UPPER)  
  4K-6388 [2] SPINDLE  
  5H-3252 [2] SEAL  
  5K-0663 [2] SLEEVE  
  5K-2763 [2] WASHER  
  5K-4984 Y [2] BRAKE ASSEM.  
    (SEE SEPARATE ILLUSTRATION)
  4K-6734 [2] COVER (LOWER)  
  Y   SEPARATE ILLUSTRATION
 

#UEH0318S0137
 

8K-6510: BRAKE & AXLE GP-FRONT

FRONT BRAKE AND AXLE (8K6510 N/S)
Serial No. 14R118-Up
5K4984 Brake parts are shown on Page 81
c140052 UEH0318S
8K6510 BRAKE & AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 814 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8K-6285 [2] SHAFT  
  6B-2731 [1] PLUG  
  6A-3785 [1] GASKET  
  3H-4190 [1] PLUG  
  6A-3845 [1] GASKET  
  5J-3941 [1] PIN  
  4K-6331 [1] HOUSING  
  4K-6807 [32] BOLT  
  6B-6682 [32] NUT  
  3B-4512 [32] LOCKWASHER  
  6K-4497 [1] BRACKET ASSEM.  
    (RIGHT HAND)
  6K-4498 [1] BRACKET ASSEM.  
    (LEFT HAND)
  5K-4985 [1] CAMSHAFT  
    (RIGHT HAND)
  5K-4986 [1] CAMSHAFT  
    (LEFT HAND)
  1L-1426 [2] RING  
  1M-0157 [2] WASHER  
  6K-4487 [2] BEARING  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  3B-8485 [2] FITTING  
  0S-0509 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  4B-4278 [12] WASHER  
  4K-6735 [2] COVER (UPPER)  
  4K-6388 [2] SPINDLE  
  5H-3252 [2] SEAL  
  5K-2763 [2] WASHER  
  5K-0663 [2] SLEEVE  
  5K-4984 Y [2] BRAKE ASSEM.  
    (SEPARATE ILLUSTRATION)
  4K-6734 [2] COVER (LOWER)  
  Y   SEPARATE ILLUSTRATION
 

#UEH0318S0138
 

7K-6573: REAR FRAME

REAR FRAME (7K6573 N/S)
Serial No. 14R1 to 14R134 inclusive
c113811 UEH0318S
7K6573 REAR FRAME Parts scheme
  For full view, you need register

Parts for your 814 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-6558 [1] PIN  
  4K-6780 [1] SPACER  
  4K-7461 [1] SEAL  
  4K-6761 [1] CAP  
  4K-7465 [1] SHIM  
  4K-7467 [1] BEARING ASSEM.  
  4K-7462 [1] SEAL  
  4K-6760 [1] CAP  
  4K-6781 [1] SPACER  
  4K-7464 [1] SHIM  
  4K-6759 [1] PLATE  
  0S-1585 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
  0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  4K-8479 H [5] STUD  
  7K-4267 H [2] PLATE ASSEM.  
  7K-6678 [1] FRAME ASSEM.  
    (Includes parts marked H)
  1A-8537 H [2] BOLT  
  3B-4510 H [2] LOCKWASHER  
  6K-8895 H [1] CAP  
  4K-8542 H [2] STUD  
  4K-8161 H [1] BLOCK  
  0S-1587 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  2B-0947 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  5K-0609 [1] COVER  
  2B-7557 [2] CORK  
  4K-8561 [1] PIN  
  4K-8653 [1] COLLAR  
  4K-8734 [1] BEARING  
  4K-7694 H [1] HITCH ASSEM.  
  3B-8489 [1] FITTING  
  5K-1021 H [1] BAR  
  2B-2006 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  7K-8925 H [1] CLAMP ASSEM. (R.H.)  
  7K-8926 H [1] CLAMP ASSEM. (L.H.)  
  4K-7239 [4] DOWEL  
  5K-1011 H [4] BLOCK  
  4K-7661 H [1] HITCH ASSEM.  
  8K-6851 H [1] PLATE  
  0S-1756 [2] BOLT  
  3B-4512 [2] LOCKWASHER  
  1D-4615 [8] BOLT  
  2J-3506 [10] NUT  
  3B-4512 [8] LOCKWASHER  
  4K-7287 [1] SUPPORT ASSEM.  
    (Rear)
  3B-8486 [1] FITTING  
  4K-7286 [1] SUPPORT ASSEM.  
    (Front)
  8S-9092 [6] BOLT  
  3B-4510 [6] LOCKWASHER  
  7K-1972 H [2] EYE  
  4K-8225 [2] PIN  
  3B-8489 [2] FITTING  
  4K-7251 [1] COVER  
  2K-0714 [1] PLATE  
  2K-0713 [1] BEARING  
    (Part of Support Assem. 4K7287)
  0L-1178 [4] BOLT  
  3K-3008 [2] LOCK  
  2K-0715 [2] WASHER  
  6K-2430 [1] SEAL  
  1A-1135 [2] BOLT (2" Long)  
    -OR-
  0S-1625 C [2] BOLT (2.5" Long)  
  3B-4510 [2] LOCKWASHER  
  7K-6117 [2] WASHER  
  3K-0159 [1] RING  
  3K-0109 [1] BEARING  
    (Part of Support Assem. 4K7286)
  3K-0158 [2] SEAL  
  3B-8489 [1] FITTING  
  C   INDICATES CHANGE
 

#UEH0318S0139
 

7K-6573: REAR FRAME

REAR FRAME (7K6573 N/S)
Serial No. 14R135-Up
c144258 UEH0318S
7K6573 REAR FRAME Parts scheme
  For full view, you need register

Parts for your 814 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-6558 [1] PIN  
  4K-6780 [1] SPACER  
  4K-7461 [1] SEAL  
  4K-6761 [1] CAP  
  4K-7465 [1] SHIM  
  4K-7467 [1] BEARING ASSEM.  
  4K-7462 [1] SEAL  
  4K-6760 [1] CAP  
  4K-6781 [1] SPACER  
  4K-7464 [1] SHIM  
  4K-6759 [1] PLATE  
  0S-1585 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
  0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  4K-8479 H [5] STUD  
  7K-4267 H [2] PLATE ASSEM.  
  7K-6678 [1] FRAME ASSEM.  
    (Includes parts marked H)
  1A-8537 H [2] BOLT  
  3B-4510 H [2] LOCKWASHER  
  6K-8895 H [1] CAP  
  4K-8542 H [2] STUD  
  4K-8161 H [1] BLOCK  
  0S-1587 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  2B-0947 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  5K-0609 [1] COVER  
  2B-7557 [2] CORK  
  4K-8561 [1] PIN  
  4K-8653 [1] COLLAR  
  4K-8734 [1] BEARING  
  4K-7694 H [1] HITCH ASSEM.  
  3B-8489 [1] FITTING  
  5K-1021 H [1] BAR  
  2B-2006 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  7K-8925 H [1] CLAMP ASSEM. (R.H.)  
  7K-8926 H [1] CLAMP ASSEM. (L.H.)  
  4K-7239 [4] DOWEL  
  6K-0852 HC [2] LUG  
  5K-1011 H [4] BLOCK  
  4K-7661 H [1] HITCH ASSEM.  
  8K-6851 H [1] PLATE  
  0S-1756 [2] BOLT  
  3B-4512 [2] LOCKWASHER  
  6K-1330 H [8] BOLT  
  2J-3506 [10] NUT  
  2S-0115 C [16] WASHER  
  4K-7287 [1] SUPPORT ASSEM.  
    (Rear)
  3B-8486 [1] FITTING  
  9K-0854 C [1] SUPPORT ASSEM.  
    (Front)
  8S-9092 [6] BOLT  
  3B-4510 [6] LOCKWASHER  
  7K-1972 H [2] EYE  
  4K-8225 [2] PIN  
  3B-8489 [2] FITTING  
  4K-7251 [1] COVER  
  2K-0714 [1] PLATE  
  2K-0713 [1] BEARING  
    (Part of Support Assem. 4K7287)
  0L-1178 [4] BOLT  
  3K-3008 [2] LOCK  
  2K-0715 [2] WASHER  
  6K-2430 [1] SEAL  
  0S-1625 [2] BOLT (2.5" Long)  
  3B-4510 [2] LOCKWASHER  
  7K-6117 [2] WASHER  
  3K-0159 [1] RING  
  3K-0109 [1] BEARING  
    (Part of 9K854 Assem.)
  3K-0158 [2] SEAL  
  3B-8489 [1] FITTING  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Installation Of New Bevel Gear And Differential Case (Flange Half){3256, 3258}
Installation Of New Bevel Gear And Differential Case (Flange Half){3256, 3258}
Installation of New Bevel Gear and Differential Case (Flange Half){3258}
Installation of New Bevel Gear and Differential Case (Flange Half){3258}
Specifications
Differential Group
814 TRACTOR, 815 & 816 COMPACOTRS, POWER TRAIN
Differential And Bevel Gear<BR> (Front)
814 TRACTOR, 815 & 816 COMPACOTRS, POWER TRAIN
Differential And Bevel Gear<BR> (Rear)
814 TRACTOR, 815 & 816 COMPACOTRS, POWER TRAIN
Torque Proportioning Differential<BR> (814 Only)
814 TRACTOR, 815 & 816 COMPACOTRS, POWER TRAIN
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Torque Proportioning Differential
TORQUE PROPORTIONING DIFFERENTIAL DISASSEMBLY & ASSEMBLY
Rear Differential And Carrier Assembly
814-815-816 WHEEL TRACTOR & COMPACTOR POWER TRAIN
Front Differential And Carrier Assembly
814-815-816 WHEEL TRACTOR & COMPACTOR POWER TRAIN
Differential And Carrier Assembly
814-815-816 WHEEL TRACTOR & COMPACTOR POWER TRAIN
Service Magazine
New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
2001/01/22
Special Instruction, REHS1282, "Installation of New Bevel Gear and Differential Case (Flange Half)"is Available {3258}
2002/03/04

Caterpillar Parts SIS Catalog 814 :

DIFFERENTIAL & BEVEL GEAR GP
8K-6512 DIFFERENTIAL & BEVEL GEAR GP
FRONT AND REAR DIFFERENTIAL AND CARRIER
6K-5314 FRONT AND REAR DIFFERENTIAL AND CARRIER
RIM GROUP
5K-5489 RIM GROUP
UNIVERSAL JOINT GP
7K-7613 UNIVERSAL JOINT GP
DRIVE SHAFT GP
4K-6144 DRIVE SHAFT GP
PRESSURE CONTROL VALVE GROUP
1P-8975 PRESSURE CONTROL VALVE GROUP
1P-8215 CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
1P-8215 CONTROL GP-TRANSMISSION HYD
FINAL DRIVE AND WHEEL
4K-6137 FINAL DRIVE AND WHEEL
WHEEL & FINAL DRIVE GP
8K-6467 WHEEL & FINAL DRIVE GP
WHEEL & FINAL DRIVE GP
8K-6467 WHEEL & FINAL DRIVE GP
REAR BRAKE AND AXLE
4K-6139 REAR BRAKE AND AXLE
BRAKE & AXLE GP-REAR
8K-6511 BRAKE & AXLE GP-REAR
FRONT BRAKE AND AXLE
4K-6135 FRONT BRAKE AND AXLE
BRAKE & AXLE GP-FRONT
8K-6510 BRAKE & AXLE GP-FRONT
REAR FRAME
7K-6573 REAR FRAME

Truck sale:

1976 CAT 814
 
1976 CAT 814

Aurteneche
Nanclares De La Oca, ALAVA, Spain
1979 CAT 814
USD $23,900 
1979 CAT 814

Rushmore Equipment
BLACK HAWK, South Dakota
1975 CAT 814
USD $20,067 
1975 CAT 814

Tilly's Crawler Parts
Toowoomba, QLD, Australia
1975 CAT 814
USD $54,458 
1975 CAT 814

Ramson Machinery
1980 CAT 814
Call 
1980 CAT 814

Machinery Action Group
Bardon, Queensland, Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.