AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS (5S6432 N/S)--Side View--Part 1 of 2 Serial No. 64J3994 to 64J4355 and 64J4709 to 64J4713 inclusive Cylinder Block parts are shown on Page 22. Note: 9S8914 Piston and Liner Group, consisting of: 1--Piston Assembly, 1--Liner and 2--Seal, is available. See Page 24 for Gasket Kits 955L


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS
BASIC ENGINE
FLYWHEEL GP

TRACK LOADER 955L TRACK LOADER 64J
 955L TRAXCAVATOR 64J03994-05182 (MACHINE) UEH0595S 955L 64J   (1976)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
5S-6432 CYLINDER BLOCK AND COVERS
5S-6432 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-6432 CYLINDER BLOCK AND COVERS
5S-6432 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
8S-3201 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
6A-6669 CYLINDER BLOCK AS
 

#UEH0595S0020
 

5S-6432: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S6432 N/S)--Side View--Part 1 of 2
Serial No. 64J3994 to 64J4355 and 64J4709 to 64J4713 inclusive
Cylinder Block parts are shown on Page 22. Note: 9S8914 Piston and Liner Group, consisting of:
1--Piston Assembly, 1--Liner and 2--Seal, is available. See Page 24 for Gasket Kits
c114437 UEH0595S
5S6432 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9H-5921 [1] GASKET  
2. 9S-6557 [4] LINER  
3. 5S-6670 [8] SEAL  
4. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
5. 8M-3023 [4] ORIFICE  
6. Y [1] BLOCK  
    (See Separate Illustration)
7. 5S-7135 [1] GASKET  
8. 5M-6214 [1] PLUG  
9. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
10. 5M-6213 [4] PLUG  
11. 0L-1143 [9] BOLT  
12. 3B-4506 [46] LOCKWASHER  
13. 8S-1959 [1] PLATE ASSEM.  
  8M-5362 [5] BOSS  
14. 0S-1591 [12] BOLT (1.50" Long)  
15. 5B-8030 [1] SPACER  
16. 3J-5389 [2] PLUG  
17. 9H-6067 [1] SEAL  
18. 0S-1625 [4] BOLT  
19. 3B-4510 [4] LOCKWASHER  
20. 8S-0499 [1] TUBE ASSEM.  
21. 8S-1963 [1] GASKET  
22. 6K-7196 [2] BRACKET  
23. 0L-1351 [12] BOLT (.875" Long)  
24. 5S-6045 [1] GASKET  
25. 4F-4879 [1] BOLT  
26. 0L-0364 [1] LOCK  
27. 3B-4626 [1] COTTER PIN  
28. 6B-7948 [1] PLUG  
29. 0L-1124 [1] GASKET  
30. 5S-8030 [1] HOUSING  
31. 0S-1594 [8] BOLT  
32. 9S-1761 [1] TUBE  
33. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
34. 2A-4639 [5] BOLT (1.625" Long)  
  Y   SEPARATE ILLUSTRATION
 

#UEH0595S0021
 

5S-6432: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S6432 N/S)--End View--Part 2 of 2
Serial No. 64J3994 to 64J4355 and 64J4709 to 64J4713 inclusive
Refer also to Page 126 for special parts
c147705 UEH0595S
5S6432 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-2753 C [1] COVER  
2. 1B-4203 [6] NUT  
3. 3B-4506 [19] LOCKWASHER  
4. 9S-8991 C [1] COVER ASSEM.  
5. 0T-0101 [4] STUD  
6. 8S-6814 [2] DOWEL  
7. 3B-2460 [1] STUD  
8. 9H-4891 [1] GASKET  
9. 1C-2251 [2] BOLT  
10. 5S-8055 [1] GASKET  
11. 0S-1594 [11] BOLT  
12. 6A-3244 [1] TUBE ASSEM.  
13. 3B-1915 [1] BOLT  
14. 5S-2898 [1] GAUGE ASSEM.  
15. 7S-1803 [1] CAP ASSEM.  
16. 7S-1801 [1] ANCHOR  
17. 8S-5089 [1] TUBE ASSEM.  
18. 8M-6744 [1] CLAMP  
19. 9S-1366 [1] BOLT  
20. 1D-5117 [4] NUT  
21. 3B-4508 [8] LOCKWASHER  
22. 5S-9594 [1] GASKET  
23. 9H-5919 [1] COVER  
24. 1A-5822 [3] BOLT  
25. 4M-4419 [1] LOCK  
26. 7S-0633 [1] SUPPORT ASSEM.  
27. 8S-1326 [1] FITTING  
28. 8F-8998 [1] NUT  
29. 0S-1595 [4] BOLT  
30. 4B-7739 [1] PLUG  
31. 7S-1234 [1] BUSHING ASSEM.  
32. 1A-1460 [11] BOLT  
33. 5M-9131 C [1] LOCK  
34. 8S-6018 [1] PAN  
35. 5M-9136 [1] LOCK  
36. 5M-9132 [1] LOCK  
37. 5M-9135 [1] LOCK  
38. 5M-9134 [1] LOCK  
39. 2B-0947 [2] BOLT  
40. 9S-3187 [1] LOCK  
41. 9S-3188 [1] LOCK  
42. 5S-7134 [1] GASKET  
43. 1A-5964 [5] BOLT (4.50" Long)  
  0L-1352 [2] BOLT (3.25" Long)  
  C   INDICATES CHANGE
 

#UEH0595S0022
 

5S-6432: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S6432 N/S)--Side View--Part 1 of 2
Serial No. 64J4356 to 64J4708 and 64J4714-Up
6A6669 Cylinder Block parts are shown on Page 22A
See Page 24 for Gasket Kits
c144002 UEH0595S
5S6432 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9H-5921 [1] GASKET  
2. 2P-8889 C [4] LINER  
3. 5S-6670 C [12] SEAL  
4. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
5. 8M-3023 [4] ORIFICE  
6. 6A-6669 YC [1] BLOCK ASSEM.  
    (Separate Illustration)
7. 5S-7135 [1] GASKET  
8. 5M-6214 [1] PLUG  
9. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
10. 5M-6213 [4] PLUG  
11. 0L-1143 [9] BOLT  
12. 3B-4506 [46] LOCKWASHER  
13. 8S-1959 [1] PLATE ASSEM.  
  8M-5362 [5] BOSS  
14. 0S-1591 [12] BOLT (1.50" Long)  
15. 5B-8030 [1] SPACER  
16. 3J-5389 [2] PLUG  
17. 9H-6067 [1] SEAL  
18. 0S-1625 [4] BOLT  
19. 3B-4510 [4] LOCKWASHER  
20. 8S-0499 [1] TUBE ASSEM.  
21. 8S-1963 [1] GASKET  
22. 6K-7196 [2] BRACKET  
23. 0L-1351 [12] BOLT (.875" Long)  
24. 5S-6045 [1] GASKET  
25. 4F-4879 [1] BOLT  
26. 0L-0364 [1] LOCK  
27. 3B-4626 [1] COTTER PIN  
28. 6B-7948 [1] PLUG  
29. 0L-1124 [1] GASKET  
30. 5S-8030 [1] HOUSING  
31. 0S-1594 [8] BOLT  
32. 9S-1761 [1] TUBE  
33. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
34. 2A-4639 [5] BOLT (1.625" Long)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEH0595S0023
 

5S-6432: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S6432 N/S)--End View--Part 2 of 2
Serial No. 64J4356 to 64J4708 and 64J4714-Up
Refer also to Page 126 for special parts
c147705 UEH0595S
5S6432 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-2753 C [1] COVER  
2. 1B-4203 [6] NUT  
3. 3B-4506 [19] LOCKWASHER  
4. 9S-8991 C [1] COVER ASSEM.  
5. 0T-0101 [4] STUD  
6. 8S-6814 [2] DOWEL  
7. 3B-2460 [1] STUD  
8. 9H-4891 [1] GASKET  
9. 1C-2251 [2] BOLT  
10. 5S-8055 [1] GASKET  
11. 0S-1594 [11] BOLT  
12. 6A-3244 [1] TUBE ASSEM.  
13. 3B-1915 [1] BOLT  
14. 5S-2898 [1] GAUGE ASSEM.  
15. 7S-1803 [1] CAP ASSEM.  
16. 7S-1801 [1] ANCHOR  
17. 8S-5089 [1] TUBE ASSEM.  
18. 8M-6744 [1] CLAMP  
19. 9S-1366 [1] BOLT  
20. 1D-5117 [4] NUT  
21. 3B-4508 [8] LOCKWASHER  
22. 5S-9594 [1] GASKET  
23. 9H-5919 [1] COVER  
24. 1A-5822 [3] BOLT  
25. 4M-4419 [1] LOCK  
26. 7S-0633 [1] SUPPORT ASSEM.  
27. 8S-1326 [1] FITTING  
28. 8F-8998 [1] NUT  
29. 0S-1595 [4] BOLT  
30. 4B-7739 [1] PLUG  
31. 7S-1234 [1] BUSHING ASSEM.  
32. 1A-1460 [11] BOLT  
33. 5M-9131 C [1] LOCK  
34. 8S-6018 [1] PAN  
35. 5M-9136 [1] LOCK  
36. 5M-9132 [1] LOCK  
37. 5M-9135 [1] LOCK  
38. 5M-9134 [1] LOCK  
39. 2B-0947 [2] BOLT  
40. 9S-3187 [1] LOCK  
41. 9S-3188 [1] LOCK  
42. 5S-7134 [1] GASKET  
43. 1A-5964 [5] BOLT (4.50" Long)  
  0L-1352 [2] BOLT (3.25" Long)  
  C   INDICATES CHANGE
 

#UEH0595S0024
 

8S-3201: CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY (8S3201 N/S)
Serial No. 64J3994 to 64J4355 and 64J4709 to 64J4713 inclusive
Part of Cylinder Block and Covers shown on Page 20
Note: For Field Replacement order 8S3711 Service Block Assembly
c106653 UEH0595S
8S3201 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [2] BEARING  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 3S-8313 [2] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 8S-4676 [5] CAP GROUP  
  8S-4674 [10] SHIM (Long)  
    (2 in each 8S4676 Cap Group)
  8S-4673 [30] SHIM (Short)  
    (6 in each 8S4676 Cap Group)
10. 7S-3224 [10] BOLT  
11. 2S-5658 [10] WASHER  
12. 5S-6420 [2] BEARING  
13. 4B-9782 [5] BALL  
14. 5S-6419 [4] BEARING  
 

#UEH0595S0025
 

6A-6669: CYLINDER BLOCK AS

6A6669 CYLINDER BLOCK ASSEMBLY
Serial No. 64J4356 to 64J4708 and 64J4714-Up
Part of Cylinder Block and Covers shown on Page 20B
Note: For Field Replacement order 6A6669 Block Assembly plus 1--2P8783 Hardware Kit
c143401 UEH0595S
6A6669 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [2] BEARING  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 5M-6213 [1] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 1P-2717 [5] CAP  
10. 7S-3224 [10] BOLT  
11. 2S-5658 [10] WASHER  
12. 5S-6420 [2] BEARING  
13. 4B-9782 [5] BALL  
14. 5S-6419 [4] BEARING  
15. 2A-3798 [2] DOWEL  
 

#UEH0595S0026
 

5S-6431: CRANKSHAFT

CRANKSHAFT (5S6431 N/S)
c114220 UEH0595S
5S6431 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3S-9730 [5] BEARING  
  2P-0716 [2] PLATE  
  9F-2247 [4] PLUG  
    (PART OF CRANKSHAFT ASSEM. 5S5252)
  5S-9022 [1] SEAL  
    -OR-
  5S-6297 [1] SEAL ASSEM.  
    (WITH SLEEVE FOR WORN FLANGE)
  5S-5252 [1] CRANKSHAFT ASSEM.  
  6B-5310 [1] BOLT  
  5S-9948 [1] WASHER  
  5S-9021 [1] SEAL  
  4M-9933 [1] GEAR (40 TEETH)  
  5H-2671 [1] KEY  
    (PARTS OF CRANKSHAFT ASSEM. 5S5252)
  5S-8038 [1] PULLEY  
 

#UEH0595S0027
 

CRANKSHAFT BEARING REPLACEMENT GROUP

CRANKSHAFT BEARING REPLACEMENT GROUP
UEH0595S0027 UEH0595S
None CRANKSHAFT BEARING REPLACEMENT GROUP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#UEH0595S0028
 

GASKET KITS

GASKET KITS
UEH0595S0028 UEH0595S
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8S-7057 WATER PUMP  
  8S-9686 DIESEL ENGINE BASIC  
  8S-9691 DIESEL ENGINE SUPPLEMENTARY  
  8S-9698 VALVE GRINDING  
  9S-1075 TRANSMISSION  
 

#UEH0595S0029
 

7S-7753: FLYWHEEL GP

7S7753 FLYWHEEL GROUP
c114058 UEH0595S
7S7753 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1565 [9] BOLT  
2. 8S-1949 [1] FLYWHEEL ASSEM.  
3. 2S-7037 [1] GEAR (156 Teeth)  
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3304 VEHICULAR ENGINE
Cylinder Liner
3304 VEHICULAR ENGINE
Cylinder Liner Projection
3304 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3304 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Radiator and Radiator Guard
ENGINE FOR 955K TRACK TYPE LOADER
Crankshaft Main Bearings
955L TRACK-TYPE LOADER ENGINE
Cylinder Liners
955L TRACK-TYPE LOADER ENGINE
Camshaft Bearings
955L TRACK-TYPE LOADER ENGINE
Crankshaft
955L TRACK-TYPE LOADER ENGINE
Balancer Shaft Bearings
955L TRACK-TYPE LOADER ENGINE
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines {1210,1211}
1999/01/18

Caterpillar Parts SIS Catalog 955L :

5S-8529 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-8529 CYLINDER HEAD AND VALVE MECHANISM
MANIFOLD
3P-0126 MANIFOLD
MANIFOLD
7S-0689 MANIFOLD
MUFFLER
8S-2815 MUFFLER
MUFFLER
8S-2815 MUFFLER
MUFFLER
8S-2815 MUFFLER
TURBOCHARGER OIL LINES
7S-1154 TURBOCHARGER OIL LINES
5S-6432 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-6432 CYLINDER BLOCK AND COVERS
5S-6432 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
8S-3201 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
6A-6669 CYLINDER BLOCK AS
CRANKSHAFT
5S-6431 CRANKSHAFT
CRANKSHAFT BEARING REPLACEMENT GROUP
CRANKSHAFT BEARING REPLACEMENT GROUP
GASKET KITS

Truck sale:

Caterpillar 955L
 
Caterpillar 955L
- track loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 955L, Construction
19,200 
Caterpillar 955L, Construction
- track loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 955L, Construction
 
Caterpillar 955L, Construction
- track loaders
NMC
Caterpillar 955L, Construction
 
Caterpillar 955L, Construction
- track loaders
FABICK CAT
Caterpillar 955L, Construction
17,000 
Caterpillar 955L, Construction
- track loaders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.