AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7S9332 GOVERNOR GROUP--Part 2 of 2 Serial No. 64J3994 to 64J4112, 64J4120, 64J4124, 64J4141 and 64J4142 inclusive Part of Fuel Pump Housing and Governor shown on Page 29 955L


FUEL SYSTEM
GOVERNOR GP
OPERATOR STATION
PANEL GP
FUEL SYSTEM
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
FILTER GP-FUEL
PUMP GP-FUEL TRANSFER

TRACK LOADER 955L TRACK LOADER 64J
 955L TRAXCAVATOR 64J03994-05182 (MACHINE) UEH0595S 955L 64J   (1976)

FUEL SYSTEM

GOVERNOR GP
RACK STOP
9S-3312 RACK STOP
GOVERNOR GROUP
7S-9332 GOVERNOR GROUP
7S-9332 GOVERNOR GROUP
GOVERNOR GROUP
7S-9332 GOVERNOR GROUP
7S-9332 GOVERNOR GROUP
 

#UEH0595S0040
 

7S-9332: GOVERNOR GROUP

7S9332 GOVERNOR GROUP--Part 2 of 2
Serial No. 64J3994 to 64J4112, 64J4120, 64J4124, 64J4141 and 64J4142 inclusive
Part of Fuel Pump Housing and Governor shown on Page 29
c224637 UEH0595S
7S9332 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4154 [1] COLLAR  
2. 4S-8513 [1] GASKET  
3. 1S-0219 [1] BOLT  
4. 2F-4159 [1] LOCK  
5. 3S-9640 [1] LEVER ASSEM.  
6. 9M-9788 [1] PLUNGER  
7. 7M-7316 [1] SPRING  
8. 5H-1351 [1] PIN  
9. 7B-8105 [1] LOCK  
10. 7L-8777 [1] SLEEVE  
11. 7S-8447 [1] PISTON ASSEM.  
12. 8M-8997 [1] SEAL  
13. 9M-6293 [1] LOCK  
14. 0S-1615 [3] BOLT  
15. 1S-4741 [1] CYLINDER  
16. 3K-0810 [1] RING  
17. 7M-7219 [1] BEARING  
18. 7M-7193 [2] RACE  
19. 2S-0007 [1] SLEEVE  
20. 8M-8726 [1] DOWEL  
21. 8M-8993 [1] RING  
22. 2S-0008 [1] SEAT  
23. 5S-5060 [1] WEIGHT ASSEM.  
  2S-0101 C [2] WEIGHT  
24. 1S-5440 [2] DOWEL  
25. 9M-6303 [1] SPRING  
26. 9M-6302 [2] WASHER  
27. 9M-4704 [1] SCREW  
28. 3S-9639 [1] SEAT ASSEM.  
29. 8H-9181 [1] SPRING  
30. 8M-8739 [1] BOLT  
31. 5S-9607 [1] NUT  
32. 8L-4155 [1] SCREW  
33. 7S-8828 [1] COVER ASSEM.  
34. 2S-7316 [1] DOWEL  
  C   INDICATES CHANGE
 

#UEH0595S0041
 

7S-9332: GOVERNOR GROUP

7S9332 GOVERNOR GROUP--Part 1 of 2
Serial No. 64J4113 to 64J4119, 64J4121 to 64J4123, 64J4125 to 64J4140 and
64J4143-Up. Part of Fuel Pump Housing and Governor shown on Page 29
c117428 UEH0595S
7S9332 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-4690 [1] PLUG  
2. 1S-9312 [1] SPRING  
3. 1B-2790 [3] BOLT  
4. 8S-8950 [1] SCREW (Low Idle)  
5. 5S-1221 [1] SPRING  
6. 9S-1726 [1] HOUSING ASSEM.  
  8M-8403 [1] GUIDE  
7. 2S-7905 [1] PLUG  
8. 4F-4585 [1] PLUG  
9. 8S-0134 [1] BEARING  
10. 3S-2898 [1] PLATE ASSEM.  
11. 9S-4671 [1] SEAL  
12. 3S-3005 [1] SHAFT ASSEM.  
13. 9S-2308 [1] GASKET  
14. 6H-5636 [2] BOLT  
15. 8H-9182 [1] ROLLER  
16. 8H-9186 [2] SPRING  
17. 2A-5546 [4] BOLT  
18. 9M-1216 [1] PLUNGER  
19. 2P-8763 C [1] GASKET  
20. 7S-9331 [1] SCREW (High Idle)  
21. 7M-2167 [1] RING  
22. 9S-2309 [1] WASHER  
  C   INDICATES CHANGE
 

#UEH0595S0042
 

7S-9332: GOVERNOR GROUP

7S9332 GOVERNOR GROUP--Part 2 of 2
Serial No. 64J4113 to 64J4119, 64J4121 to 64J4123, 64J4125 to 64J4140 and
64J4143-Up. Part of Fuel Pump Housing and Governor shown on Page 29
c202751 UEH0595S
7S9332 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4154 [1] COLLAR  
2. 4S-8513 [1] GASKET  
3. 9S-4468 C [1] BOLT  
4. 2F-4159 [1] LOCK  
5. 9S-4466 [1] LEVER ASSEM.  
6. 9M-9788 [1] PLUNGER  
7. 7M-7316 [1] SPRING  
8. 5H-1351 [1] PIN  
9. 7B-8105 [1] LOCK  
10. 7L-8777 [1] SLEEVE  
11. 7S-8447 [1] PISTON ASSEM.  
12. 8M-8997 [1] SEAL  
13. 9M-6293 [1] LOCK  
14. 0S-1615 [3] BOLT  
15. 1S-4741 [1] CYLINDER  
16. 3K-0810 [1] RING  
17. 7M-7219 [1] BEARING  
18. 7M-7193 [2] RACE  
19. 2S-0007 [1] SLEEVE  
20. 8M-8726 [1] DOWEL  
21. 8M-8993 [1] RING  
22. 2S-0008 [1] SEAT  
23. 5S-5060 [1] WEIGHT ASSEM.  
  2S-0101 C [2] WEIGHT  
24. 1S-5440 [2] DOWEL  
25. 9M-6303 [1] SPRING  
26. 9M-6302 [2] WASHER  
27. 9M-4704 [1] SCREW  
28. 3S-9639 [1] SEAT ASSEM.  
29. 8H-9181 [1] SPRING  
30. 8M-8739 [1] BOLT  
31. 5S-9607 [1] NUT  
32. 8L-4155 [1] SCREW  
33. 7S-8828 [1] COVER ASSEM.  
34. 2S-7316 [1] DOWEL  
35. 9S-4673 C [1] BAND ASSEM.  
36. 2S-7235 C [1] SPRING  
37. 2S-7289 C [1] COLLAR  
  C   INDICATES CHANGE
 

#UEH0595S0043
 

9S-7993: SERVICE METER

SERVICE METER (9S7993 N/S)
c119764 UEH0595S
9S7993 SERVICE METER Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-3033 [1] CLAMP  
3. 1T-0416 [2] BOLT  
  3F-9556 [2] LOCKWASHER  
4. 9S-7992 [1] SERVICE METER ASSEM.  
  9S-4131 [1] KIT (Service Meter Window)  
    (Includes Window, Gasket & Screws)
6. 9S-3032 [1] CLAMP  
7. 4M-8303 [1] SEAL  
 

#UEH0595S0044
 

7S-1251: FUEL PRIMING PUMP GROUP

7S1251 FUEL PRIMING PUMP GROUP
c101330 UEH0595S
7S1251 FUEL PRIMING PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9H-2256 Y [1] PUMP ASSEM.  
    (See Separate Illustration)
2. 8S-0210 [1] TUBE (Outlet 8.98" Long)  
3. 3B-8998 [3] FITTING  
4. 1F-1344 [3] NUT  
    (1 in each 3B8998 Fitting)
5. 1H-7922 [1] FITTING  
6. 1F-1344 [1] NUT  
    (Part of 1H7922 Fitting)
7. 8S-0211 [1] TUBE (Inlet 17.19" Long)  
8. 2B-2695 [2] BOLT  
9. 3B-4505 [2] LOCKWASHER  
10. 7S-1129 [1] BRACKET  
  Y   SEPARATE ILLUSTRATION
 

#UEH0595S0045
 

9H-2256: PUMP ASSEMBLY

9H2256 PUMP ASSEMBLY
Serial No. 64J3994 to 4126, 4141, 4142, 4153, 4302 and 64J4317 inclusive
Part of 7S1251 Fuel Priming Pump Group
c107655 UEH0595S
9H2256 PUMP ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-3820 C [1] ROD ASSEM.  
  1M-6782 [1] KNOB  
  1M-6783 [1] ROD  
  9S-3819 C [1] PIN (56" LONG)  
  2S-8145 [1] SEAL  
  1M-6784 [1] GUIDE  
  9S-3818 C [1] NUT  
  1M-6781 [3] NUT  
  1M-6735 [1] WASHER  
  9S-3817 C [1] SPRING  
  1M-6779 [1] BARREL  
  1M-6788 [1] NUT  
  1M-6786 [1] PIN  
  1H-1023 [2] RING  
  1M-6778 [1] BODY  
  1M-6780 [2] SPRING  
  1M-6718 [2] BALL  
  1M-6789 [2] RETAINER  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEH0595S0046
 

9H-2256: PUMP ASSEMBLY

9H2259 PUMP ASSEMBLY
Serial No. 64J4127 to 4140, 4143 to 4152, 4154 to 4301, 4303 to 4316 and
64J4318-Up. Part of 7S1251 Fuel Priming Pump Group shown on Page 32
c145779 UEH0595S
9H2256 PUMP ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-6718 [2] BALL  
2. 1H-1023 [2] SEAL  
3. 1M-6781 [3] NUT  
 

#UEH0595S0047
 

7S-4430: FUEL TRANSFER PUMP GROUP

7S4430 FUEL TRANSFER PUMP GROUP
c112418 UEH0595S
7S4430 FUEL TRANSFER PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2F-8616 [1] NUT  
2. 8H-9806 [1] GEAR (11 Teeth-Drive)  
3. 3H-1489 [1] KEY  
4. 8S-4375 [1] CAGE ASSEM.  
5. 8F-6058 [1] BUSHING  
6. 4S-7756 [2] SEAL  
7. 6J-2419 [2] SEAL  
8. 7S-4439 [1] RING  
9. 7S-2374 [1] GASKET  
10. 7S-4434 [1] BODY ASSEM.  
11. 2S-6838 [1] SHAFT  
12. 8F-6058 [1] BUSHING  
13. 3B-4505 H [2] LOCKWASHER  
14. 4B-3388 H [2] BOLT  
15. 8S-4368 [1] GEAR (10 Teeth-Idler)  
16. 8S-5581 [1] COVER ASSEM.  
17. 8S-5575 [1] SEAL  
18. 7S-4433 [2] FERRULE  
19. 7H-3171 [1] PLUG  
20. 8M-0874 [1] PLUNGER ASSEM.  
21. 8M-3210 [1] SPRING  
22. 2A-1913 [1] GASKET  
23. 7S-4440 [1] BOLT  
24. 7S-6701 [2] SCREW (1.75" long)  
25. 9F-6641 [4] SCREW (1.25" long)  
26. 8S-4373 [1] SHAFT ASSEM. (10 Teeth-Drive)  
  H   NOT PART OF 7S4430 FUEL TRANSF
 

#UEH0595S0048
 

5S-9666: FUEL FILTER GROUP

5S9666 FUEL FILTER GROUP
c155237 UEH0595S
5S9666 FUEL FILTER GROUP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1927 [1] NEEDLE ASSEM.  
2. 7F-3901 [1] SEAT  
3. 1H-9722 [1] PLUG  
4. 5S-9580 [1] BASE  
5. 9S-4167 [1] STUD  
6. 1P-2299 Y [1] FILTER ASSEM.  
7. 1B-9575 [3] BOLT  
  8F-7242 [8] WASHER  
8. 5S-9020 [1] GASKET  
9. 5S-6333 [1] ADAPTER  
10. 8H-9402 [1] ADAPTER  
11. 9H-4557 [2] SEAL  
12. 5S-9060 [1] GASKET  
13. 9F-2247 [1] PLUG  
14. 5M-6214 [3] PLUG  
15. 4B-3388 [2] BOLT 1.25 in.(28.58 mm) long  
16. 1D-4538 [3] BOLT 2.25 in.(57.15 mm) long  
  Y   SEPARATE ILLUSTRATION
 

#UEH0595S0049
 

7S-8831: FUEL PUMP HOUSING GROUP

7S8831 FUEL PUMP HOUSING GROUP
Part of Fuel Pump Housing and Governor shown on Page 29
c105895 UEH0595S
7S8831 FUEL PUMP HOUSING GROUP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4M-0411 [4] BONNET  
  8H-9204 [4] WASHER  
  2M-4314 [4] BUSHING  
  9B-1363 [4] SPRING  
  9H-5746 [4] CHECK  
  1M-3506 [4] RING  
  9H-5797 [4] PLUNGER AND BARREL ASSEM.  
  1S-0206 [4] SPRING  
  9H-5729 [4] WASHER  
  3S-9735 [4] LIFTER ASSEM.  
  4M-1474 [2] PIN  
  4F-6024 [2] DOWEL  
  1S-1953 [1] BEARING  
    (Parts of Housing Assem. 7S8830
  8H-9208 [1] DOWEL  
    (Part of Gear Assem. 5S5058)
  1S-0214 [1] SPRING  
  2S-7905 [1] PLUG  
    (Part of Housing Assem. 7S8830)
  0L-0472 [1] BOLT  
  2H-3504 [1] LOCK  
  8H-9208 [1] DOWEL  
    (Part of Camshaft Assem. 8H9207)
  7M-5940 [1] PLATE  
  5S-5058 [1] GEAR ASSEM.  
    (66 Teeth)
  2A-3746 [1] PLUG  
  2M-8604 [1] BEARING  
  3D-4603 [1] PLUG  
    (Parts of Housing Assem. 7S8830)
  1M-1077 [4] SEAL  
  8M-3020 [4] DOWEL  
  8M-3019 [4] DOWEL  
    (Parts of Housing Assem. 7S8830)
  2M-4208 [4] SPACER (.174" Thick)  
  2M-4209 [4] SPACER (.178" Thick)  
  2M-4210 [4] SPACER (.182" Thick)  
  2M-4211 [4] SPACER (.186" Thick)  
  2M-4212 [4] SPACER (.190" Thick)  
  5M-2691 [4] SPACER (.194" Thick)  
  5M-2697 [4] SPACER (.170" Thick)  
  5S-7189 [4] SPACER (.198" Thick)  
    (Use as required)
  9H-1296 [1] BEARING  
    (Part of Housing Assem. 7S8830)
  2S-0825 [1] RACK  
  9H-1284 [1] BEARING  
    (Part of Housing Assem. 7S8830)
  1M-0690 [1] SLEEVE  
    (Part of Camshaft Assem. 8H9207)
  8H-9207 [1] CAMSHAFT ASSEM.  
  7S-8830 [1] HOUSING ASSEM.  
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Governor Housing<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Disassembly and Assembly
Radiator and Radiator Guard
ENGINE FOR 955K TRACK TYPE LOADER
Fuel Injection Pump Housing And Governor
955L TRACK-TYPE LOADER ENGINE
Fuel Injection Pump Housing And Governor
955L TRACK-TYPE LOADER ENGINE
Governor
955L TRACK-TYPE LOADER ENGINE
Fuel Check Valve And Bypass Valve
955L TRACK-TYPE LOADER ENGINE
Fuel Injection Pumps
955L TRACK-TYPE LOADER ENGINE
Fuel Transfer Pump
955L TRACK-TYPE LOADER ENGINE
Fuel Injection Pump Housing
955L TRACK-TYPE LOADER ENGINE
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog 955L :

GOVERNOR GROUP
7S-9332 GOVERNOR GROUP
FUEL PUMP HOUSING AND GOVERNOR
7S-9334 FUEL PUMP HOUSING AND GOVERNOR
RACK STOP
9S-3312 RACK STOP
GOVERNOR TORQUE SPRING
2P-8592 GOVERNOR TORQUE SPRING
GOVERNOR CONTROL
6K-4907 GOVERNOR CONTROL
GOVERNOR CONTROL
6K-4907 GOVERNOR CONTROL
ACCESSORY DRIVE AND PRIMARY FUEL FILTER
5S-8056 ACCESSORY DRIVE AND PRIMARY FUEL FILTER
PISTON & ROD GP
9S-8912 PISTON & ROD GP
GOVERNOR GROUP
7S-9332 GOVERNOR GROUP
7S-9332 GOVERNOR GROUP
SERVICE METER
9S-7993 SERVICE METER
FUEL PRIMING PUMP GROUP
7S-1251 FUEL PRIMING PUMP GROUP
PUMP ASSEMBLY
9H-2256 PUMP ASSEMBLY
PUMP ASSEMBLY
9H-2256 PUMP ASSEMBLY
FUEL TRANSFER PUMP GROUP
7S-4430 FUEL TRANSFER PUMP GROUP
FUEL FILTER GROUP
5S-9666 FUEL FILTER GROUP

Truck sale:

Caterpillar 955L
 
Caterpillar 955L
- track loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 955L, Construction
19,200 
Caterpillar 955L, Construction
- track loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 955L, Construction
 
Caterpillar 955L, Construction
- track loaders
NMC
Caterpillar 955L, Construction
 
Caterpillar 955L, Construction
- track loaders
FABICK CAT
Caterpillar 955L, Construction
17,000 
Caterpillar 955L, Construction
- track loaders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.