AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

951C TRAXCAVATOR 69H01869-02519 (MACHINE) UNDERCARRIAGE Caterpillar SIS



TRACK LOADER 951C TRACK LOADER 69H
 951C TRAXCAVATOR 69H01869-02519 (MACHINE) UEH0600S 951C 69H   (1980)

Parts group 951C:

  For full view, you need register
UNDERCARRIAGE
IDLER GP
FRONT IDLER
9K-6022 FRONT IDLER
FRONT IDLER (9K6022 N/S)
ROLLER GP
TRACK ROLLER GP
7K-8572 TRACK ROLLER GP
7K8572 TRACK ROLLER GROUP--Single Flange--6 Required
Serial No. 69H1869 to 69H2432 inclusive. Only separate parts serviced
When complete Group is required order 1--9S9539 Track Roller Group plus:
4--S1625 Bolt and 4--4D3704 Washer. Refer also to Pages 133 # 134
for special parts
TRACK ROLLER GP
7K-8571 TRACK ROLLER GP
7K8571 TRACK ROLLER GROUP--Double Flange--4 Required
Serial No. 69H1869 to 69H2432 inclusive. Only separate parts serviced
When complete Group is required order 1--9S9538 Track Roller Group
plus: 4--S1625 Bolt and 4--4D3704 Washer. Refer also to Pages
133 and 134 for special parts
TRACK ROLLER GP
7K-8572 TRACK ROLLER GP
7K8572 TRACK ROLLER GROUP--Single Flange--6 Required
Serial No. 69H2433-Up. Only separate parts serviced. When complete
Group is required order 19S9539 Track Roller Group plus: 4S1625 Bolt
and 44D3704 Washer. Refer also to Pages 133 & 134 for special parts
TRACK ROLLER GP
7K-8571 TRACK ROLLER GP
7K8571 TRACK ROLLER GROUP--Double Flange--4 Required
Serial No. 69H2433-Up. Only separate parts serviced. When complete
Group is required order 19S9538 Track Roller Group plus: 4S1625 Bolt
and 44D3704 Washer. Refer also to Pages 133 & 134 for special parts
TRACK ROLLER GP
9S-9538 TRACK ROLLER GP
9S9538 TRACK ROLLER GROUP--Double Flange--Field Installation
ROLLER GP-TRACK SINGLE FLANGE
9S-9539 ROLLER GP-TRACK SINGLE FLANGE
9S9539 TRACK ROLLER GROUP--Single Flange--Field Installation
ROLLER GP-TRACK CARRIER
9S-3570 ROLLER GP-TRACK CARRIER
9S3570 TRACK CARRIER ROLLER GROUP--2 Required
Serial No. 69H1869 to 69H2432 inclusive
ROLLER GP-TRACK CARRIER
9S-3570 ROLLER GP-TRACK CARRIER
9S3570 TRACK CARRIER ROLLER GROUP--2 Required
Serial No. 69H2433-Up
TRACK ROLLER DIRT GUARD GROUP
7K-4175 TRACK ROLLER DIRT GUARD GROUP
7K4175 TRACK ROLLER DIRT GUARD GROUP
TRACK GP
TRACK GROUP
8K-9600 TRACK GROUP
8K9600 TRACK GROUP--14" Grouser Shoe
Note: 7S6160 Track Pin and Bushing Group is available
Refer also to Pages 129 and 132 for special parts
3A-3601 TRACK ARRANGEMENT
3A3601 TRACK ARRANGEMENT
TRACK GROUP
7K-3017 TRACK GROUP
7k3017 TRACK GROUP--R.H.--16" Offset Triple Grouser Shoe
Part of 3A3601 Track Arrangement
TRACK GROUP
7K-3018 TRACK GROUP
7K3018 TRACK GROUP--L.H.--16" Offset Triple Grouser Shoe
Part of 3A3601 Track Arrangement listed on Page 129
3A-3638 TRACK ARRANGEMENT
3A3638 TRACK ARRANGEMENT
TRACK GROUP
3A-3636 TRACK GROUP
3A3636 TRACK GROUP--16" Grouser Shoe--R.H.--Off-Set
Part of 3A3638 Track Arrangement
Note: 7S6160 Track Pin and Bushing Group is available
TRACK GROUP
3A-3637 TRACK GROUP
3A3637 TRACK GROUP--16" Grouser Shoe--L.H.--Off-Set
Part of 3A3638 Track Arrangement
Note: 7S6160 Track Pin and Bushing Group is available
FRAME GP-TRACK ROLLER
TRACK ROLLER FRAME
9K-6014 TRACK ROLLER FRAME
TRACK ROLLER FRAME (9K6014 N/S)
Refer also to Page 131 for special parts
TRACK ROLLER FRAME GROUP
8K-9601 TRACK ROLLER FRAME GROUP
8K9601 TRACK ROLLER FRAME GROUP

Information:

(For parts list, see above)

Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Special Instruction
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Recoil Springs <BR> (Machines With One Recoil Spring)
951 TRACK-TYPE LOADER POWER TRAIN
Recoil Springs (Machines With Two Recoil Springs)
951 TRACK-TYPE LOADER POWER TRAIN
Front Idlers
951 TRACK-TYPE LOADER POWER TRAIN
Track Adjustment
951 TRACK-TYPE LOADER POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Undercarriage Reconditioning Bulletin
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Service Magazine
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Specifications
Track Carrier Rollers
951 TRACK-TYPE LOADER POWER TRAIN
Track Rollers<BR> (Single and Double Flange)
951 TRACK-TYPE LOADER POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Oval Track Roller Disassembly and Assembly Procedures {4180}
Oval Track Roller Disassembly and Assembly Procedures {4180}
Service Magazine
Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Special Instruction
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Specifications
Recoil Springs <BR> (Machines With One Recoil Spring)
951 TRACK-TYPE LOADER POWER TRAIN
Recoil Springs (Machines With Two Recoil Springs)
951 TRACK-TYPE LOADER POWER TRAIN
Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Special Instruction
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Special Instruction
Early (175.5 mm (6.91 inch)) Pitch Track Shoes are Discontinued and are Service Replaced{4170}
Early (175.5 mm (6.91 inch)) Pitch Track Shoes are Discontinued and are Service Replaced{4170}
Technical Information Bulletin
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Specifications
Track Roller Frame
951 TRACK-TYPE LOADER POWER TRAIN
Alignment Of Track Roller Frame
951 TRACK-TYPE LOADER POWER TRAIN
Track Adjustment
951 TRACK-TYPE LOADER POWER TRAIN
Track
951 TRACK-TYPE LOADER POWER TRAIN
Track
951 TRACK-TYPE LOADER POWER TRAIN
Track Carrier Rollers
951 TRACK-TYPE LOADER POWER TRAIN
Track Rollers<BR> (Single and Double Flange)
951 TRACK-TYPE LOADER POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Reconditioning Bulletin
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Service Magazine
Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
General Duty Link Assemblies Replace SALT and Classic Link Assemblies for Certain D5, and D6 Track-Type Tractors and 951, 953, and 955 Track-Type Loaders {4169, 4171}
General Duty Link Assemblies Replace SALT and Classic Link Assemblies for Certain D5, and D6 Track-Type Tractors and 951, 953, and 955 Track-Type Loaders {4169, 4171}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Service Magazine
Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Tool Operating Manual
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Reconditioning Bulletin
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Service Magazine
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Specifications
Track Roller Frame
951 TRACK-TYPE LOADER POWER TRAIN
Alignment Of Track Roller Frame
951 TRACK-TYPE LOADER POWER TRAIN
Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Reuse And Salvage Guidelines
Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}
Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}
Special Instruction
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Magazine
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Truck sale:

CAT 951C
 
CAT 951C

McGrew Equipment Company
Seven Valleys, Pennsylvania
1990 CAT 951C
Call 
1990 CAT 951C

OLM 90 SRL
1977 CAT 951C
USD $10,000 
1977 CAT 951C

Four-D Equipment
Florida
1973 CAT 951C
USD $12,500 
1973 CAT 951C

Paul D Burner Contractor
CAT 951C
 
CAT 951C

BLOUNT PARTS & EQUIPMENT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.