AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS (2P2396 N/S)--Part 2 of 3 Serial No. 68H1869 to 2097, 2099 to 2107, 2109, 2110, 2117, 2119, 2156, 2168, 2171, 2274, 2280, 2319 and 69H2368 inclusive 951B


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP

TRACK LOADER 951B TRACK LOADER 69H
 951C TRAXCAVATOR 69H01869-02519 (MACHINE) UEH0600S 951B 69H   (1985)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
2P-2396 CYLINDER BLOCK AND COVERS
2P-2396 CYLINDER BLOCK AND COVERS
2P-2396 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
2P-2396 CYLINDER BLOCK AND COVERS
2P-2396 CYLINDER BLOCK AND COVERS
2P-2396 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AS
6A-6669 CYLINDER BLOCK AS
BLOCK ASSEMBLY
8S-3201 BLOCK ASSEMBLY
 

#UEH0600S0020
 

2P-2396: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (2P2396 N/S)--Part 2 of 3
Serial No. 68H1869 to 2097, 2099 to 2107, 2109, 2110, 2117, 2119, 2156, 2168,
2171, 2274, 2280, 2319 and 69H2368 inclusive
c114519 UEH0600S
2P2396 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 951B TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-9134 [1] LOCK  
2. 1A-1460 [11] BOLT  
3. 5M-9131 [1] LOCK  
4. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
5. 5M-1903 [1] COVER  
6. 4M-2250 [1] GASKET  
7. 0L-1351 [2] BOLT  
8. 3B-4506 [2] LOCKWASHER  
9. 5M-6214 [1] PLUG  
10. 5M-6213 [4] PLUG  
11. 1D-4614 [2] BOLT  
  5J-7947 [2] WASHER  
12. 9H-5921 [1] GASKET  
13. 3J-5389 [2] PLUG  
14. 6B-7948 [1] PLUG  
  0L-1124 [1] GASKET  
15. 3B-4627 [1] COTTER PIN  
16. 5B-8030 [1] SPACER  
17. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
18. 5S-8030 [1] HOUSING  
19. 9S-1761 [1] TUBE  
20. 6K-8716 [2] WASHER (.065" Thick)  
  6K-8717 [2] WASHER (.035" Thick)  
  6K-8714 [2] WASHER (.120" Thick)  
21. 1A-8537 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
22. 7S-1052 [2] BLOCK  
23. 5M-9136 [1] LOCK  
24. 5M-9132 [1] LOCK  
25. 5M-9135 [1] LOCK  
26. 2B-0947 [2] BOLT  
 

#UEH0600S0021
 

2P-2396: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (2P2396 N/S)--Part 3 of 3
Serial No. 69H1869 to 2097, 2099 to 2107, 2109, 2110, 2117, 2119, 2156, 2168,
2171, 2274, 2280, 2319 and 79H2368 inclusive. Refer also to Page
116 for special parts
c114520 UEH0600S
2P2396 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 951B TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-1803 [1] CAP ASSEM.  
2. 5S-2898 [1] GAUGE ASSEM.  
3. 9S-1366 H [1] BOLT  
4. 8S-0275 [1] TUBE ASSEM. (Oil Filler)  
5. 6A-3244 [1] TUBE ASSEM. (Oil Gauge)  
6. 0S-1594 [11] BOLT  
7. 4M-4419 [1] LOCK  
8. 0S-1595 [4] BOLT  
9. 3B-4508 [8] LOCKWASHER  
10. 8S-1326 [1] FITTING  
11. 7S-1234 [1] BUSHING ASSEM.  
12. 0L-1143 [9] BOLT  
13. 3B-4506 [23] LOCKWASHER  
14. 7S-0633 [1] SUPPORT ASSEM.  
15. 6K-8714 [2] WASHER (.120" Thick)  
  6K-8716 [2] WASHER (.065" Thick)  
  6K-8717 [2] WASHER (.035" Thick)  
16. 0S-1756 [2] BOLT  
  2J-3506 [2] NUT  
  5H-1504 [4] WASHER  
17. 9S-3188 [1] LOCK  
18. 9S-3187 [1] LOCK  
19. 9H-4891 [1] GASKET  
20. 1B-4203 [6] NUT  
21. 2N-2753 [1] COVER  
22. 9S-8991 [1] COVER ASSEM. (Timing Gear)  
23. 0T-0101 [4] STUD  
24. 8S-6814 [2] DOWEL  
25. 3B-2460 [1] STUD  
26. 1C-2251 [2] BOLT  
27. 5S-8055 [1] GASKET  
28. 3B-1915 [1] BOLT  
29. 7S-1801 [1] ANCHOR  
30. 0L-1352 [2] BOLT  
31. 4B-7739 [1] PLUG  
32. 1D-5117 H [4] NUT  
33. 1A-5822 H [3] BOLT  
34. 9H-5919 H [1] COVER  
  5S-9594 [1] GASKET  
  H   SHIPPING AND STORAGE
 

#UEH0600S0022
 

2P-2396: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (2P2396 N/S)--Part 1 of 3
Serial No. 69H2098, 2108, 2111 to 2116, 2118, 2120 to 2155, 2157 to 2167, 2169, 2170, 2170, 2172 to 2273, 2275 to 2279, 2281 to
2318, 2320 to 2367 and 69H2369-Up. 6A6669 Block parts are shown on Page 22D. See Page 25 for Gasket Kits
c143402 UEH0600S
2P2396 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 951B TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-6670 C [12] SEAL  
2. 2P-8889 C [4] LINER  
3. 8M-3023 [4] ORIFICE  
4. 6A-6669 CY [1] BLOCK ASSEM.  
    (Separate Illustration)
5. 0S-1594 [8] BOLT  
6. 3B-4506 [42] LOCKWASHER  
7. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
8. 5S-7134 [1] GASKET  
9. 5S-7135 [1] GASKET  
10. 8S-6018 [1] PAN  
11. 1A-5964 [5] BOLT  
12. 9H-6067 [1] SEAL  
13. 8S-0499 [1] TUBE ASSEM.  
14. 8S-1963 [1] GASKET  
15. 2A-4639 [5] BOLT (1.625 in. long)  
  0S-1591 [12] BOLT (1.50 in. long)  
16. 8S-1959 [1] PLATE ASSEM.  
  8M-5362 [5] BOSS  
17. 5S-6045 [1] GASKET  
18. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
19. 0L-1351 [12] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEH0600S0023
 

2P-2396: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (2P2396 N/S)--Part 2 of 3
Serial No. 69H2098, 2108, 2111 to 2116, 2118, 2120 to 2155, 2157 to 2167, 2169, 2170,
2172 to 2273, 2275 to 2279, 2281 to 2318, 2320 to 2367 and 69H2369-Up
c114519 UEH0600S
2P2396 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 951B TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-9134 [1] LOCK  
2. 1A-1460 [11] BOLT  
3. 5M-9131 [1] LOCK  
4. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
5. 5M-1903 [1] COVER  
6. 4M-2250 [1] GASKET  
7. 0L-1351 [2] BOLT  
8. 3B-4506 [2] LOCKWASHER  
9. 5M-6214 [1] PLUG  
10. 5M-6213 [4] PLUG  
11. 1D-4614 [2] BOLT  
  5J-7947 [2] WASHER  
12. 9H-5921 [1] GASKET  
13. 3J-5389 [2] PLUG  
14. 6B-7948 [1] PLUG  
  0L-1124 [1] GASKET  
15. 3B-4627 [1] COTTER PIN  
16. 5B-8030 [1] SPACER  
17. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
18. 5S-8030 [1] HOUSING  
19. 9S-1761 [1] TUBE  
20. 6K-8716 [2] WASHER (.065" Thick)  
  6K-8717 [2] WASHER (.035" Thick)  
  6K-8714 [2] WASHER (.120" Thick)  
21. 1A-8537 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
22. 7S-1052 [2] BLOCK  
23. 5M-9136 [1] LOCK  
24. 5M-9132 [1] LOCK  
25. 5M-9135 [1] LOCK  
26. 2B-0947 [2] BOLT  
 

#UEH0600S0024
 

2P-2396: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (2P2396 N/S)--Part 3 of 3
Serial No. 69H2098 to 2108, 2111 to 2116, 2118, 2120 to 2155, 2157 to 2167, 2169,
2170, 2172 to 2273, 2275 to 2279, 2281 to 2318, 2320 to 2367 and 69H2369-Up
Refer also to Page 116 for special parts
c114520 UEH0600S
2P2396 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 951B TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-1803 [1] CAP ASSEM.  
2. 5S-2898 [1] GAUGE ASSEM.  
3. 9S-1366 H [1] BOLT  
4. 8S-0275 [1] TUBE ASSEM. (Oil Filler)  
5. 6A-3244 [1] TUBE ASSEM. (Oil Gauge)  
6. 0S-1594 [11] BOLT  
7. 4M-4419 [1] LOCK  
8. 0S-1595 [4] BOLT  
9. 3B-4508 [8] LOCKWASHER  
10. 8S-1326 [1] FITTING  
11. 7S-1234 [1] BUSHING ASSEM.  
12. 0L-1143 [9] BOLT  
13. 3B-4506 [23] LOCKWASHER  
14. 7S-0633 [1] SUPPORT ASSEM.  
15. 6K-8714 [2] WASHER (.120" Thick)  
  6K-8716 [2] WASHER (.065" Thick)  
  6K-8717 [2] WASHER (.035" Thick)  
16. 0S-1756 [2] BOLT  
  2J-3506 [2] NUT  
  5H-1504 [4] WASHER  
17. 9S-3188 [1] LOCK  
18. 9S-3187 [1] LOCK  
19. 9H-4891 [1] GASKET  
20. 1B-4203 [6] NUT  
21. 2N-2753 [1] COVER  
22. 9S-8991 [1] COVER ASSEM. (Timing Gear)  
23. 0T-0101 [4] STUD  
24. 8S-6814 [2] DOWEL  
25. 3B-2460 [1] STUD  
26. 1C-2251 [2] BOLT  
27. 5S-8055 [1] GASKET  
28. 3B-1915 [1] BOLT  
29. 7S-1801 [1] ANCHOR  
30. 0L-1352 [2] BOLT  
31. 4B-7739 [1] PLUG  
32. 1D-5117 H [4] NUT  
33. 1A-5822 H [3] BOLT  
34. 9H-5919 H [1] COVER  
  5S-9594 [1] GASKET  
  H   SHIPPING AND STORAGE
 

#UEH0600S0025
 

6A-6669: CYLINDER BLOCK AS

6A6669 CYLINDER BLOCK ASSEMBLY
Serial No. 69H2098, 2108, 2111 to 2116, 2118, 2120 to 2155, 2157 to 2167 and 69H2169-Up
Part of Cylinder Block and Covers shown on Page 22A. Note: For Field Replacement order
6A6669 Block Assembly plus 1-2P8783 Hardware Kit
c143401 UEH0600S
6A6669 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 951B TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [2] BEARING  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 5M-6213 [1] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 1P-2717 [5] CAP  
10. 7S-3224 [10] BOLT  
11. 2S-5658 [10] WASHER  
12. 5S-6420 [2] BEARING  
13. 4B-9782 [5] BALL  
14. 5S-6419 [4] BEARING  
15. 2A-3798 [2] DOWEL  
 

#UEH0600S0026
 

8S-3201: BLOCK ASSEMBLY

BLOCK ASSEMBLY (8S3201 N/S)
Serial No. 69H1869 to 2097, 2099 to 2107, 2109, 2110, 2117, 2119, 2156 and 69H2168 inclusive
Part of Cylinder Block and Covers shown on Page 20
Note: For Field Replacement order 8S3711 Service Block Assembly
c106653 UEH0600S
8S3201 BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 951B TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [2] BEARING  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 3S-8313 [2] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 8S-4676 [5] CAP GROUP  
  8S-4674 [10] SHIM (Long)  
    (2 in each 8S4676 Cap Group)
  8S-4673 [30] SHIM (Short)  
    (6 in each 8S4676 Cap Group)
10. 7S-3224 [10] BOLT  
11. 2S-5658 [10] WASHER  
12. 5S-6420 [2] BEARING  
13. 4B-9782 [5] BALL  
14. 5S-6419 [4] BEARING  
 

#UEH0600S0027
 

9S-0773: CRANKSHAFT

CRANKSHAFT (9S773 N/S)
c114220 UEH0600S
9S0773 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 951B TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3S-9730 [5] BEARING  
  2P-0716 [2] PLATE  
  9F-2247 [4] PLUG  
    (PART OF CRANKSHAFT ASSEM. 5S5252)
  5S-9022 [1] SEAL  
    -OR-
  5S-6297 [1] SEAL ASSEM.  
    (WITH SLEEVE FOR WORN FLANGE)
  5S-5252 [1] CRANKSHAFT ASSEM.  
  6B-5310 [1] BOLT  
  5S-9948 [1] WASHER  
  5S-9021 [1] SEAL  
  4M-9933 [1] GEAR (40 TEETH)  
  5H-2671 [1] KEY  
    (PARTS OF CRANKSHAFT ASSEM. 5S5252)
  5S-8038 [1] PULLEY  
 

#UEH0600S0028
 

8S-3978: CRANKSHAFT BEARING REPLACEMENT GROUPS

CRANKSHAFT BEARING REPLACEMENT GROUPS
8S3978 FOR USE WITH STANDARD CRANKSHAFT
UEH0600S0028 UEH0600S
  For full view, you need register

Parts for your 951B TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    Complete set of bearing assemblies as shown with standard crankshaft
 

#UEH0600S0029
 

8S-3979: CRANKSHAFT BEARING REPLACEMENT GROUPS

CRANKSHAFT BEARING REPLACEMENT GROUPS
8S3979 FOR USE WITH .010 UNDERSIZE CRANKSHAFT
UEH0600S0029 UEH0600S
  For full view, you need register

Parts for your 951B TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4S-8881 [5] BEARING  
  2P-0716 [2] PLATE  
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Cylinder Block
3304 VEHICULAR ENGINE
Cylinder Liner
3304 VEHICULAR ENGINE
Cylinder Liner Projection
3304 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3304 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines {1210,1211}
1999/01/18
Improved Seal Kits for Cylinder Liner Kits {1216}
2005/11/14

Caterpillar Parts SIS Catalog 951B :

CYLINDER BLOCK AND COVERS
2P-2396 CYLINDER BLOCK AND COVERS
5S-6433 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-6433 CYLINDER HEAD AND VALVE MECHANISM
5S-6433 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-6433 CYLINDER HEAD AND VALVE MECHANISM
GLOW PLUG GP
5S-8500 GLOW PLUG GP
MUFFLER GROUP
7S-7134 MUFFLER GROUP
MUFFLER GROUP
7S-7134 MUFFLER GROUP
2P-2396 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
2P-2396 CYLINDER BLOCK AND COVERS
2P-2396 CYLINDER BLOCK AND COVERS
2P-2396 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AS
6A-6669 CYLINDER BLOCK AS
BLOCK ASSEMBLY
8S-3201 BLOCK ASSEMBLY
CRANKSHAFT
9S-0773 CRANKSHAFT
8S-3978 CRANKSHAFT BEARING REPLACEMENT GROUPS

Truck sale:

1968 CAT 951B
USD $19,900 
1968 CAT 951B

Construction Station
Wayne, Michigan
CAT 951B
USD $5,254 
CAT 951B

Roberts Plant Engineers
Gloucestershire, United Kingdom
CAT 951B
 
CAT 951B

Peterson & Associates Auctions
Minnesota
 
 
1974 CAT 951B

Ritchason Auctioneers, Inc.
Lebanon, Tennessee
CAT 951B
 
CAT 951B

Tom Witvoet Sr. Equipment
Herscher, Illinois
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.