AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6K4665 FINAL DRIVE GROUP--Lower Half--Part 2 of 2 Serial No. 44H760 to 44H1122 inclusive D4D TRACK-TYPE TRACTOR


POWER TRAIN
DRIVE GP-FINAL
COVER GP-PROTECTION
STEERING AND BRAKING SYSTEM
BRAKE GP
CLUTCH & BRAKE GP-STEERING
CLUTCH GP-STEERING

TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 44H
 D4D TRACTOR 44H01191-UP (MACHINE) UEH0796S D4D 44H   (1968)

POWER TRAIN

DRIVE GP-FINAL
FINAL DRIVE GROUP
6K-4665 FINAL DRIVE GROUP
6K-4665 FINAL DRIVE GROUP
FINAL DRIVE GROUP
6K-4665 FINAL DRIVE GROUP
6K-4665 FINAL DRIVE GROUP
 

#UEH0796S0070
 

6K-4665: FINAL DRIVE GROUP

6K4665 FINAL DRIVE GROUP--Lower Half--Part 2 of 2
Serial No. 44H760 to 44H1122 inclusive
c200783 UEH0796S
6K4665 FINAL DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3F-1530 [2] GUARD  
  1B-4203 [8] NUT  
  3B-4506 [8] LOCKWASHER  
  3K-3815 [20] BOLT (1.75" long)  
  6B-6683 [20] NUT  
  2A-3710 [10] LOCK  
  6K-4618 [2] HUB  
  1A-2610 [4] DOWEL  
  4B-9374 [2] CUP  
  4B-9373 [2] CONE  
  7H-2742 [2] NUT  
  2B-8847 [2] RING  
  2B-8093 [2] PIN  
  6K-4617 [2] SHAFT  
  8K-6521 [2] PLATE  
  0S-1585 [28] BOLT  
  3B-4508 [28] LOCKWASHER  
  0S-1585 [16] BOLT  
  2M-0849 [16] WASHER  
  4K-6049 R [4] SEAL GROUP  
  4K-0212 [4] RETAINER  
  2K-2939 [4] SEAL  
  4F-6029 [4] GUARD  
  3A-2339 [12] RIVET  
    (1/2 OF EACH IN EACH SPROCKET ASSEM. 7K5481)
  1B-5170 [2] PLUG  
  4K-0173 [8] RING  
    (2 IN EACH SEAL GROUP 4K6049)
  4F-8396 [2] GUARD  
  4B-1322 [12] SCREW  
  3B-4504 [12] LOCKWASHER  
  7K-4771 [2] GEAR(52 TEETH)  
  7K-3582 [2] NUT  
    NOTE: QUANTITIES SHOWN ARE REQUIRED FOR BOTH R.H. AND L.H. SIDES
  7K-5481 [2] SPROCKET ASSEM. (Standard)  
    NOTE: 7K2514 SPROCKET RIM IS AVAILABLE FOR REPLACEMENT OF WORN SPROCKET RIM.
  0S-0509 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  0S-0509 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  1A-4145 [2] LOCK  
  5K-1787 [2] SEAL  
  3F-1547 [2] SEAL  
  3F-1542 [2] DOWEL  
    (1 in each 9K5382 Assem.)
  6B-3223 C [2] CUP  
    (1 in each 9K6842 Assem.)
  4B-7270 [2] CONE  
  3H-2617 [4] PIN (SPRING)  
    (2 IN EACH RETAINER ASSEM.3F1554)
  5K-5887 [2] KEY  
  3F-1556 [2] CAP  
  2B-8828 [2] NUT  
  3F-1552 [8] SHIM  
  5B-5821 [4] PIN  
    (2 in each 9K5382 Assem.)
  2F-2815 [2] LOCK  
  9K-5382 C [2] HOLDER ASSEM.  
  3F-1554 [2] RETAINER ASSEM  
  3F-1537 [2] NUT  
  3F-1536 [2] LOCK  
  3F-1548 [2] BUSHING  
    (1 IN EACH SUPPORT ASSEM.1M1947)
  0S-1587 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  3F-1555 [2] GASKET  
  1M-1947 [2] SUPPORT ASSEM.  
  3B-8486 [2] FITTING  
  2M-0122 [4] DOWEL  
  4B-1280 [16] SCREW  
  3F-1546 [2] RETAINER  
  9K-6842 C [2] CAGE ASSEM.  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#UEH0796S0071
 

6K-4665: FINAL DRIVE GROUP

6K4665 FINAL DRIVE GROUP--Upper Half-Part 1 of 2
Serial No. 44H1123-Up
c215182 UEH0796S
6K4665 FINAL DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1825 [28] BOLT  
  2M-0849 C [28] WASHER  
  7K-7333 [2] RETAINER  
  0S-1591 [12] BOLT  
  5M-2894 C [12] WASHER  
  3K-9619 [2] SEAL  
  1H-9456 C [4] BOLT  
  9K-4058 [2] LOCK  
  2J-5815 [2] NUT  
  2B-6325 [2] GASKET  
    NOTE: QUANTITIES SHOWN ARE REQUIRED FOR BOTH R.H. AND L.H. SIDES
  7K-8238 [2] FLANGE  
  7K-8237 [2] DRUM  
  7M-7260 GASKET SOLUTION  
  9K-7173 C [2] CASE ASSEM.  
  0L-1392 [8] STUD  
    (4 in each 9K7173 Assem.)
  5B-7267 [4] CORK  
  2A-3746 [2] PLUG  
  9K-3230 C [2] DOWEL  
  7K-3007 [2] GASKET  
  5K-1311 [2] GASKET  
  3F-4746 [2] DOWEL  
  4H-0254 [2] DOWEL  
  1M-1930 [2] CAGE  
  1M-1795 [2] SPACER  
  5P-6373 C [2] RACE AND ROLLER ASSEM.  
  3B-3969 [2] RACE (INNER)  
  5P-6372 C [2] RACE AND ROLLER ASSEM.  
  5P-6377 C [2] RACE (OUTER)  
  7K-4770 [2] PINION (9 TEETH)  
  5P-6380 C [2] RACE AND ROLLER ASSEM.  
  2M-0533 [2] RACE (INNER)  
  C   INDICATES CHANGE
 

#UEH0796S0072
 

6K-4665: FINAL DRIVE GROUP

6K4665 FINAL DRIVE GROUP--Lower Half-Part 2 of 2
Serial No. 44H1123-Up
c215183 UEH0796S
6K4665 FINAL DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3F-1530 [2] GUARD  
  1B-4203 [8] NUT  
  3B-4506 [8] LOCKWASHER  
  3K-3815 [20] BOLT (1.75" long  
  7H-3607 C [20] NUT  
  6K-4618 [2] HUB  
  1A-2610 [4] DOWEL  
  4B-9374 [2] CUP  
  4B-9373 [2] CONE  
  7H-2742 [2] NUT  
  2B-8847 [2] RING  
  2B-8093 [2] PIN  
  6K-4617 [2] SHAFT  
  8K-6521 [2] PLATE  
  0S-1585 [28] BOLT  
  3B-4508 [28] LOCKWASHER  
  0S-1585 [16] BOLT  
  2M-0849 [16] WASHER  
  4K-6049 R [4] SEAL GROUP  
  4K-0212 [4] RETAINER  
  2K-2939 [4] SEAL  
  4F-6029 [4] GUARD  
  3A-2339 [12] RIVET  
    (1 2 OF EACH IN EACH SPROCKET ASSEM. 7K5481)
  1B-5170 [2] PLUG  
  4K-0173 [8] RING  
    (2 IN EACH SEAL GROUP 4K6049)
  4F-8396 [2] GUARD  
  4B-1322 [12] SCREW  
  3B-4504 [12] LOCKWASHER  
  7K-4771 [2] GEAR (52 TEETH)  
  9K-9273 C [2] NUT  
    NOTE: QUANTIES SHOWN ARE REQUIRED FOR BOTH R.H. AND L.H. SIDES
  7K-5481 [2] SPROCKET ASSEM. (Standard)  
    NOTE: 7K2514 SPROCKET RIM IS AVAILABLE FOR REPLACEMENT OF WORN SPROCKET RIM.
  0S-0509 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  0S-0509 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  1A-4145 [2] LOCK  
  3J-0634 C [2] SEAL  
  3F-1547 [2] SEAL  
  3F-1542 [2] DOWEL  
    (1 in each 9K9271 Assem.)
  6B-3223 [2] CUP  
    (1 in each 9K6842 Assem.)
  4B-7270 [2] CONE  
  3H-2617 [4] PIN (SPRING)  
    (2 in Each Retainer Assem. 3F1554)
  5K-5887 [2] KEY  
  3F-1556 [2] CAP  
  2B-8828 [2] NUT  
  3F-1552 [8] SHIM  
  5B-5821 [4] PIN  
    (2 in each 9K9271 Assem.)
  2F-2815 [2] LOCK  
  9K-9271 C [2] HOLDER ASSEM.  
  3F-1554 [2] RETAINER ASSEM.  
  3F-1537 [2] NUT  
  3F-1536 [2] LOCK  
  3F-1548 [2] BUSHING  
    (1 in Each Support Assem. 1M1947)
  0S-1587 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  3F-1555 [2] GASKET  
  1M-1947 [2] SUPPORT ASSEM.  
  3B-8486 [2] FITTING  
  2M-0122 [4] DOWEL  
  4B-1280 [16] SCREW  
  3F-1546 [2] RETAINER  
  9K-6842 [2] CAGE ASSEM.  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#UEH0796S0073
 

4K-5032: TRANSMISSION CASE AND COVERS

TRANSMISSION CASE AND COVERS (4K5032 N/S)
Part of 6K2687 Transmission Arrangement shown on Page 35
c112069 UEH0796S
4K5032 TRANSMISSION CASE AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  [1] PLUNGER ASSEM.  
  [2] BOLT  
  [2] LOCKWASHER  
  [2] BUSHING  
  [1] GUIDE ASSEM.  
  [1] GASKET  
  [3] BOLT  
  [3] LOCKWASHER  
  [11] BOLT  
  [11] LOCKWASHER  
  [1] SEAL  
  [1] PLUG  
  [1] GASKET  
  [4] STUD  
  [1] BREATHER  
  [1] PLUG  
  [1] GASKET  
  [2] SHAFT  
  [1] BOLT  
  [1] LOCKWASHER  
  [1] COVER  
  [1] SHAFT  
  [1] GASKET  
  [1] SEAL  
  [1] CASE  
  [10] BOLT  
  [10] LOCKWASHER  
 

#UEH0796S0074
 

4K-5027: BRAKES

BRAKES (4K5027 N/S)
Note: Quantities shown are those required for both R.H. and L.H. sides
c116419 UEH0796S
4K5027 BRAKES Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5K-0606 [ 1] PIN  
    (PART OF SUPPORT ASSEM. 4K5557)
  0S-0175 [ 4] PIN  
  3B-4617 [ 4] COTTER PIN  
  3K-4725 [ 4] LINK  
  1M-1789 [ 2] LEVER  
  0S-1585 [ 8] BOLT  
  3B-4508 [ 8] LOCKWASHER  
  3K-4708 [ 2] ANCHOR  
  7H-3908 [ 4] PIN  
  7H-3788 [ 2] FORK  
  7H-3922 [ 2] BAND ASSEM.  
  7H-3926 [ 2] BAND ASSEM.  
  1D-4716 [ 16] NUT  
  3B-4505 [ 16] LOCKWASHER  
  1D-5117 [ 2] NUT  
  3K-4724 [ 2] SCREW  
  4K-6345 [ 2] NUT  
  7B-5054 [ 32] RIVET  
  5H-6030 [ 4] LINING  
  3K-5802 [ 8] BOLT  
    (1/2 OF EACH IN EACH BAND ASSEM 7H3922)
  5H-6030 [ 4] LINING  
  7B-5054 [ 32] RIVET  
    1/2 OF EACH IN EACH BAND ASSEM. 7H3926)
  6H-1298 [ 1] SPRING  
  5K-0634 [ 1] PIN  
    (PART OF PAWL ASSEM. 5K627)
  4K-5557 [ 1] SUPPORT ASSEM.  
  9F-2978 [ 2] NUT  
    (PART OF SUPPORT ASSEM. 4K5557)
  0S-1591 [ 2] BOLT  
  3B-4506 [ 2] LOCKWASHER  
  8S-9092 [ 2] BOLT  
  1D-4720 [ 2] NUT  
  4K-5268 [ 2] SHAFT  
  3K-4723 [ 4] KEY  
  5K-0627 [ 1] PAWL ASSEM.  
  5K-0633 [ 1] PIN  
  9S-1315 [ 2] PIN  
  3B-4617 [ 2] COTTER PIN  
  4K-5110 [ 1] LEVER (RIGHT HAND)  
  4K-5622 [ 1] LEVER (LEFT HAND)  
  0S-1585 [ 2] BOLT  
  3K-4709 [ 1] LEVER (RIGHT HAND)  
  3K-4710 [ 1] LEVER (LEFT HAND)  
  1M-1794 [ 2] BAND ASSEM.  
  5H-6030 [ 4] LINING  
  7B-5054 [ 32] RIVET  
  3K-5802 [ 8] BOLT  
    (1/2 OF EACH IN EACH BAND ASSEM 1M1794)
  9H-4280 [ 2] LINING GROUP  
    EACH CONSISTING OF A COMPLETE SET OF LININGS AND RIVETS FOR ONE BRAKE.
  4K-5213 [ 1] PEDAL (RIGHT HAND)  
  4K-5214 [ 1] PEDAL (LEFT HAND)  
  6K-3475 [ 1] RATCHET  
  4H-4641 [ 1] PIN  
  3B-4617 [ 1] COTTER PIN  
  4K-5284 [ 2] ROD ASSEM  
  4B-6493 [ 2] SPRING  
  9S-1354 [ 2] NUT  
  3B-4617 [ 2] COTTER PIN  
  4K-5563 [ 2] END  
  4K-5251 [ 2] BRACKET  
  0S-1585 [ 6] BOLT  
  3B-4508 [ 6] LOCKWASHER  
  1K-2602 [ 2] WASHER  
  3B-4629 [ 2] COTTER PIN  
  1M-1917 [ 2] SHAFT  
  6K-8088 [ 4] BEARING  
 

#UEH0796S0075
 

4K-5028: STEERING CLUTCH CONTROL GROUP

4K5028 STEERING CLUTCH CONTROL GROUP--Side View - Part 1 of 2
c200347 UEH0796S
4K5028 STEERING CLUTCH CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3B-8489 [2] FITTING  
  9S-1354 [2] NUT  
  6F-0253 [2] LOCKWASHER  
  1H-7445 [2] SCREW  
  9H-7414 [1] SUPPORT  
  1A-1460 C [3] BOLT (2 IN. LONG)  
  0S-1587 C [3] BOLT (1.75 IN. LONG)  
  3B-4508 [6] LOCKWASHER  
  5K-8642 [2] YOKE ASSEM.  
  1M-1723 [2] INSERT  
    (1 IN EACH YOKE ASSEM. 5K8642)
  7K-8915 [2] SCREW  
  0T-0355 [2] LOCK  
  6F-6672 [2] SEAL  
  5K-8641 [2] BALL  
    (1 IN EACH YOKE ASSEM. 5K8642)
  6B-0041 [2] COVER  
  4K-5685 [2] BUMPER  
  5K-9587 [1] LEVER (RIGHT HAND)  
  5K-9588 [1] LEVER (LEFT HAND)  
  0L-0829 [2] HANDLE  
  0S-1571 [2] BOLT  
  1D-4717 [2] NUT  
  6K-8088 [4] BEARING  
  3B-4629 [2] COTTER PIN  
  1K-2602 [2] WASHER  
  1M-5267 [2] LEVER  
  1B-8736 [2] KEY  
  6B-4285 [2] ROD  
  1B-4430 [2] NUT  
  2M-8340 [2] END  
  0S-0175 [4] PIN  
  3B-4617 [4] COTTER PIN  
  4K-3603 [2] HOSE (12" LONG)  
  1H-7460 [2] LOCK  
  1H-7459 [2] GROMMET  
  3H-0120 [1] ELBOW  
  4K-3643 [2] SCREW  
  0T-0355 [2] LOCK  
  6F-6672 [2] SEAL  
  C   INDICATES CHANGE
 

#UEH0796S0076
 

4K-5028: STEERING CLUTCH CONTROL GROUP

4K5028 STEERING CLUTCH CONTROL GROUP--Top View - Part 2 of 2
c200348 UEH0796S
4K5028 STEERING CLUTCH CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-0484 [2] BOLT  
  5B-2383 [2] NUT  
  3B-7754 [2] BUSHING  
  0S-0175 [2] PIN  
  3B-4617 [2] COTTER PIN  
  9B-1447 [2] ROD  
  3H-8363 [4] OUTER RACE  
  1B-3756 [4] INNER ROLLER ASSEM.  
  9H-7416 [2] BELLCRANK  
  1M-1730 [2] SCREW  
  9H-7417 [2] PIN  
  5K-7809 [2] SPRING  
  1D-4717 [2] NUT  
  5F-6848 [2] NUT  
  5F-6849 [2] STUD  
  1D-4717 [2] NUT  
  5F-6743 [2] ANCHOR  
  5K-7280 [2] SHAFT  
  3H-8363 [4] OUTER RACE  
  1B-3756 [4] INNER ROLLER ASSEM.  
  9B-1458 [2] PIN  
  5H-6347 [2] SHAFT  
  5B-3254 [2] NUT  
  8F-2188 [2] LOCK  
  5K-7997 [2] PIN  
  1M-1729 [2] NUT  
  1B-4430 [2] NUT  
  4K-3966 [2] END  
  0V-0196 [2] BOLT  
  1B-2578 [2] NUT  
  0L-1351 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  0S-1579 [2] BOLT  
  5B-2383 [2] NUT  
  3B-7754 [2] BUSHING  
  1M-1725 [2] ROD  
  9B-2823 [1] LEVER (RIGHT HAND)  
  9B-2824 [1] LEVER (LEFT HAND)  
  1B-8736 [2] KEY  
  0S-1588 [2] BOLT  
  3K-9021 [2] SPACER  
 

#UEH0796S0077
 

6K-4664: STEERING CLUTCH CASE AND COVERS

STEERING CLUTCH CASE AND COVERS (6K4664 N/S)--Side View - Part 1 of 2
Serial No. 44H760 to 44H764 inclusive
c200327 UEH0796S
6K4664 STEERING CLUTCH CASE AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [4] CORK  
2. 0S-1569 [2] BOLT  
3. 3B-4510 [6] LOCKWASHER  
4. 2B-7558 [4] CORK  
5. 0S-1594 [8] BOLT  
6. 3B-4506 [36] LOCKWASHER  
7. 3K-7812 [2] COVER  
8. 4K-5470 [2] GASKET  
9. 0L-1351 [8] BOLT  
10. 1A-2029 [1] BOLT  
11. 0S-1587 [1] BOLT (1.75 in. long)  
12. 3K-4157 [1] COVER  
13. 3K-4158 [1] GASKET  
14. 5S-2256 [2] BOLT (1.75 in. long)  
15. 5F-8807 [1] BOLT (1.25 in. long)  
16. 3B-4508 [4] LOCKWASHER  
17. 6K-6551 [2] COVER  
18. 6K-6552 [2] GASKET  
19. 0S-1571 [8] BOLT (1.75 in. long)  
20. 3B-1915 [8] BOLT (1.37 in. long)  
21. 0S-0509 [8] BOLT (.75 in. long)  
22. 3B-0867 [2] COVER  
23. 3B-0866 [2] GASKET  
24. 4B-2363 [2] PLUG  
25. 6F-4868 [2] GASKET  
26. 0S-1624 [4] BOLT  
27. 3B-0844 [1] COVER  
28. 3B-0845 [1] GASKET  
29. 4K-5243 [2] SPACER  
 

#UEH0796S0078
 

6K-4664: STEERING CLUTCH CASE AND COVERS

STEERING CLUTCH CASE AND COVERS (6K4664 N/S)--End View - Part 2 of 2
Serial No. 44H760 to 44H764 inclusive
c116421 UEH0796S
6K4664 STEERING CLUTCH CASE AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [4] BOLT  
2. [26] LOCKWASHER  
3. [4] BOLT  
4. [18] LOCKWASHER  
5. [2] COVER  
6. [2] GASKET  
7. [2] COVER  
8. [2] GASKET  
9. [1] COVER  
10. [1] GASKET  
11. [12] BOLT  
12. [1] PLUG  
13. [1] SEAL  
14. C [12] BOLT  
15. [1] COVER  
16. [10] BOLT  
17. C [4] SEAL  
18. C [1] CASE ASSEM.  
19. [1] DOWEL  
20. [4] BOLT  
21. [4] LOCKWASHER  
22. [2] BUSHING  
23. [2] CAP  
24. [2] BOLT  
25. [1] GASKET  
26. [3] PLUG  
27. [1] PLUG  
  [1] GASKET  
28. [1] COVER ASSEM.  
  [2] DOWEL  
29. [4] BEARING  
30. [2] BEARING  
31. [2] PLUG  
32. [2] BEARING  
  C   INDICATES CHANGE
 

#UEH0796S0079
 

6K-4664: STEERING CLUTCH CASE AND COVERS

STEERING CLUTCH CASE AND COVERS (6K4664 N/S)--Side View - Part 1 of 2
Serial No. 44H765-Up
c215702 UEH0796S
6K4664 STEERING CLUTCH CASE AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [4] CORK  
2. 0S-1569 [2] BOLT  
3. 3B-4510 [6] LOCKWASHER  
4. 2B-7558 [4] CORK  
5. 0S-1594 [8] BOLT  
6. 0T-0431 C [36] WASHER  
7. 3K-7812 [2] COVER  
8. 4K-5470 [2] GASKET  
9. 0L-1351 [8] BOLT  
10. 1A-2029 [1] BOLT  
11. 0S-1587 [1] BOLT (1.75 in. long)  
12. 3K-4157 [1] COVER  
13. 3K-4158 [1] GASKET  
14. 5S-2256 [2] BOLT (1.75 in. long)  
15. 5F-8807 [1] BOLT (1.25 in. long)  
16. 3B-4508 [4] LOCKWASHER  
17. 6K-6551 [2] COVER  
18. 6K-6552 [2] GASKET  
19. 0S-1571 [8] BOLT (1.75 in. long)  
20. 3B-1915 [8] BOLT (1.37 in. long)  
21. 0S-0509 [8] BOLT (.75 in. long)  
22. 3B-0867 [2] COVER  
23. 3B-0866 [2] GASKET  
24. 4B-2363 [2] PLUG  
25. 6F-4868 [2] GASKET  
26. 0S-1624 [4] BOLT  
27. 3B-0844 [1] COVER  
28. 3B-0845 [1] GASKET  
29. 4K-5243 [2] SPACER  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Specifications
Final Drive
D4 (SA) TRACTOR POWER TRAIN
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Final Drive Cases, Gears, And Hubs
D4D TRACTOR POWER TRAIN
Final Drive Pinions And Flanges
D4D TRACTOR POWER TRAIN
Service Magazine
Use 6V4032 Adapter Plate During Preload Adjustment Of Final Drive Bearings{4066,4074,4054,4053,0626}
1981/04/20
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Stronger Final Drive Gear And Pinion Used{4055,4091}
1978/01/09
Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Caterpillar Parts SIS Catalog D4D :

FINAL DRIVE GROUP
6K-4665 FINAL DRIVE GROUP
6K-2686 TRANSMISSION
TRANSMISSION
6K-2686 TRANSMISSION
4K-5029 GEARSHIFT CONTROL
GEARSHIFT CONTROL
4K-5029 GEARSHIFT CONTROL
TRANSMISSION ARRANGEMENT
6K-2687 TRANSMISSION ARRANGEMENT
UNIVERSAL JOINT GP
5K-5008 UNIVERSAL JOINT GP
OIL PUMP ASSEMBLY
7S-7602 OIL PUMP ASSEMBLY
FINAL DRIVE GROUP
6K-4665 FINAL DRIVE GROUP
6K-4665 FINAL DRIVE GROUP
TRANSMISSION CASE AND COVERS
4K-5032 TRANSMISSION CASE AND COVERS
BRAKES
4K-5027 BRAKES
STEERING CLUTCH CONTROL GROUP
4K-5028 STEERING CLUTCH CONTROL GROUP
4K-5028 STEERING CLUTCH CONTROL GROUP
STEERING CLUTCH CASE AND COVERS
6K-4664 STEERING CLUTCH CASE AND COVERS
6K-4664 STEERING CLUTCH CASE AND COVERS

Truck sale:

Caterpillar D4D, Construction
14,000 
Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT
CATERPILLAR D4D 1966
 
CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR D4D 1973
 
CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CAT D4D
USD $39,016 
CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia
CAT D4D
USD $18,900 
CAT D4D

DRC Ranch
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.