8K176 FINAL DRIVE GROUP--L.H.--Part 2 of 2 225 EXCAVATOR

Pos.	Part No	Qty	Parts name
1.	1P-2695	[1]	CUP
2.	1P-2694	[1]	CONE
3.	2V-0813	[1]	GEAR (45 & 12 Teeth)
4.	2V-0814	[1]	GEAR (43 Teeth)
5.	1J-2860	[1]	CUP
6.	8K-1749	[1]	SHAFT
7.	1J-4757	[1]	CONE
8.	8K-0577	[1]	SPACER
9.	4B-2363	[1]	PLUG
	6F-4868	[1]	GASKET
10.	8K-1487	[1]	CASE ASSEM.
11.	7M-8480	[2]	DOWEL
12.	8K-1754	[2]	SPACER
13.	2P-1373	[1]	CUP
	2P-1374	[1]	CONE
14.	8K-1316	[1]	SHIM
15.	0S-1625	[7]	BOLT
	4D-3704	[7]	WASHER
16.	3V-1727	[1]	SPROCKET
17.	8K-1756	[1]	CAGE
18.	5H-8624	[1]	SEAL
19.	8K-0709	[1]	SHIM
20.	2K-0439	[1]	BOLT
	4K-0684	[1]	WASHER
21.	8K-1755	[1]	RETAINER
22.	1P-7249	[1]	SEAL GROUP
	1P-7239	[1]	RING
23.	1T-0132	[1]	SEAL
24.	0S-1587	[5]	BOLT
	2M-0849	[5]	WASHER
25.	8K-0487	[1]	COVER
	8K-1314	[1]	SHIM
26.	1B-3993	[1]	CONE
27.	1B-3994	[1]	CUP
28.	2K-8257	[1]	SEAL

#UEH0804S0261

8K-0164: DRIVE GP-SWING

DRIVE GP-SWING

SWING DRIVE (8K164 N/S)--Part 1 of 2

c114914 UEH0804S

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2K-0439	[2]	BOLT
2.	8K-0579	[2]	RETAINER
	8K-0709	[1]	SHIM PACK
3.	8K-0437	[1]	GEAR (43 Teeth)
4.	6B-5262	[1]	PLUG
	6K-5551	[1]	GASKET
5.	2B-7557	[4]	CORK
6.	2B-0947	[19]	BOLT
7.	2M-0849	[23]	WASHER
8.	8K-0578	[1]	SPACER
9.	8S-9076	[1]	CUP
10.	8S-9075	[1]	CONE
11.	0S-1625	[8]	BOLT
	4D-3704	[8]	WASHER
12.	8K-1945	[1]	SHAFT ASSEM.
		[2]	DOWEL
13.	8K-1946	[1]	RETAINER ASSEM.
	2A-3348	[1]	DOWEL
14.	2K-2939	[1]	SEAL
15.	1P-7249	[1]	SEAL GROUP
	1P-7239	[2]	RING
16.	8K-0270	[1]	PINION (17 Teeth)
	9M-2092	[1]	SEAL
17.	8K-1940	[1]	RETAINER ASSEM.
	2A-3348	[2]	DOWEL
18.	8K-0578	[1]	SPACER
19.	2D-8009	[1]	SEAL
20.	2P-1374	[1]	CONE
21.	2P-1373	[1]	CUP
22.	8K-1938	[1]	CARTRIDGE
23.	7M-7260		LIQUID GASKET
24.	0S-1585	[4]	BOLT
25.	8K-0576	[1]	CAGE
	1H-8128	[1]	SEAL
26.	8K-0520	[1]	COVER

#UEH0804S0262

8K-0164: DRIVE GP-SWING

DRIVE GP-SWING

SWING DRIVE (8K164 N/S)--Part 2 of 2
3K5801 Swing Brake parts are shown on Page 114

c116817 UEH0804S

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-4367	[1]	BOLT
2.	9S-4372	[1]	RETAINER
3.	8K-0861	[1]	DRUM
4.	1D-4326	[1]	SEAL
5.	8K-0665	[1]	CAGE
	5F-3106	[1]	SEAL
6.	3K-5799	[1]	CAMSHAFT & LEVER ASSEM.
7.	2N-2138	[1]	CUP
	2N-2139	[1]	CONE
8.	7D-8348	[1]	CUP
	7D-8349	[1]	CONE
9.	8K-0438	[1]	GEAR (38 & 13 Teeth)
10.	8K-0582	[1]	SHIM PACK
11.	9S-3581	[2]	CUP
	9S-3582	[2]	CONE
12.	8K-0439	[1]	GEAR (43 & 13 Teeth)
13.	3K-0649	[1]	CUP
	3P-1210	[1]	CONE
14.	8K-0440	[1]	PINION (13 Teeth)
15.	8K-0583	[1]	CAGE
	2H-3931	[1]	SEAL
16.	0S-1585	[14]	BOLT
17.	2M-0849	[10]	WASHER
	2B-7557	[4]	CORK
18.	8K-0708	[1]	SHIM PACK
19.	8K-1944	[1]	CASE ASSEM.
	7M-8480	[2]	DOWEL
20.	7M-7260	[2]	LIQUID GASKET
21.	1D-4629	[8]	BOLT
	9H-1031	[8]	WASHER
22.	8K-0584	[1]	COUPLING
23.	7K-8876	[1]	CUP
	7K-8877	[1]	CONE
24.	8K-0712		SHIM PACK
25.	3K-5801 Y	[1]	BRAKE ASSEM.
			(Separate Illustration)
26.	3B-4508	[4]	LOCKWASHER
	Y		SEPARATE ILLUSTRATION

#UEH0804S0263

3K-5801: BRAKE AS

BRAKE AS

3K5801 SWING BRAKE ASSEMBLY
Part of Swing Drive shown on Page 113

c114983 UEH0804S

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3K-7056	[1]	SPRING
2.	3K-7057	[2]	SPRING
3.	3K-7058	[1]	PLATE ASSEM.
			THE FOLLOWING REPAIR KITS ARE AVAILABLE:
4.	4K-1265	[1]	KIT (Brake Shoe)
			(Consists of 2-Shoe & Lining Assem.)
5.	3K-9508	[1]	KIT (Lining)
			(Consists of complete set of Linings and Rivets)

#UEH0804S0264

8K-2681: PUMP DRIVE GROUP

PUMP DRIVE GROUP

8K2681 PUMP DRIVE GROUP

c208928 UEH0804S

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6B-5262	[1]	PLUG
	6K-5551	[1]	GASKET
2.	8K-2473	[1]	GEAR ASSEM.
			(Includes)
	8K-0442	[1]	GEAR (94 teeth)
3.	8K-2418	[1]	PLUG
4.	2J-5245	[8]	BOLT
5.	1A-2029	[18]	BOLT
	3B-4506	[18]	LOCKWASHER
5.	9K-3116	[4]	BOLT
	9H-1024	[4]	WASHER
6.	8K-2423	[1]	DRIVER
7.	5P-3118	[2]	SEAL
8.	8K-2518	[1]	JOINT ASSEM.
9.	8K-2682	[1]	ADAPTER
10.	8K-1035	[1]	CASE ASSEM.
11.	8K-2416	[2]	TUBE ASSEM.
12.	7M-8480	[2]	DOWEL
13.	7M-7260		LIQUID GASKET
14.	8K-2779	[2]	CAGE
15.	5F-3106	[3]	SEAL
16.	030-7335	[6]	BOLT
	0L-2119	[6]	WASHER
17.	1P-2662	[5]	CONE
18.	1P-2636	[5]	CUP
19.	5H-3252	[2]	SEAL
20.	8K-2432	[2]	SHIM PACK
21.	8K-0711	[1]	CAGE
22.	2H-3935	[1]	SEAL
23.	8M-3837	[1]	PLUG
	6K-5551	[1]	GASKET
24.	9S-3582	[1]	CONE
25.	9S-3581	[1]	CUP
26.	8K-0710	[1]	SHIM PACK
27.	8K-0441	[1]	GEAR (79 teeth)
28.	8K-0470	[1]	COVER
	2B-7557	[2]	CORK
29.	2H-8829	[1]	PLUG
	7F-0560	[1]	WASHER
30.	1A-5822	[23]	BOLT 6.99 cm(2.75 in.) long
	0L-1329	[2]	BOLT 7.62 cm(3 in.) long
			-OR-
	1A-5822	[20]	BOLT 6.99 cm(2.75 in.) long
	0L-1329	[5]	BOLT 7.62 cm(3 in.) long
	2M-0849	[25]	WASHER
31.	0S-1591	[12]	BOLT
32.	5M-2894	[20]	WASHER
33.	5P-0402	[2]	SEAL

#UEH0804S0265

8K-0177: PARKING BRAKE GROUP

PARKING BRAKE GROUP

8K177 PARKING BRAKE GROUP--2 Required

c207604 UEH0804S

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-8758	[1]	SEAL
2.	8K-0522	[1]	BLOCK
3.	8K-0524	[1]	LOCK
4.	2D-1691 C	[1]	SEAL
5.	8K-0507	[2]	DISC
6.	8K-0509	[3]	PLATE
7.	2V-1235 C	[1]	ADAPTER
8.	4F-7388	[1]	SEAL
9.	2B-0947	[6]	BOLT
	3B-4508	[6]	LOCKWASHER
10.	8K-0508	[2]	SPRING
11.	8K-0510	[2]	RETAINER
12.	5J-8400	[1]	SEAL
13.	5J-5150	[1]	SEAL
14.	5J-1731	[1]	SEAL
15.	8K-0523	[1]	PISTON
16.	4F-7387	[1]	SEAL
17.	8K-0558	[1]	NUT
	8K-0557	[1]	SETSCREW
			-OR-
	8K-4352 C	[1]	NUT
18.	2V-0462 C	[1]	PLATE
19.	0S-1566	[2]	BOLT
20.	0L-2119	[2]	WASHER
21.	1J-6473	[1]	RING
22.	5F-3999	[1]	SEAL
23.	8K-0521	[1]	HOUSING
24.	8K-3584	[1]	VALVE
	C		INDICATES CHANGE

#UEH0804S0266

8K-0185: SWING BRAKE CONTROL

SWING BRAKE CONTROL

SWING BRAKE CONTROL (8K185 N/S)

c211168 UEH0804S

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8K-0761	[1]	LEVER GROUP
2.	5D-4824	[1]	PIN
	4B-4277	[2]	WASHER
	5D-4822	[2]	RING
3.	0S-1590	[4]	BOLT
	1D-4717	[4]	NUT
4.	3B-4506	[10]	LOCKWASHER
5.	0L-1351	[4]	BOLT
6.	8K-0725	[1]	BRACKET
7.	3D-6649	[2]	CLAMP
8.	0S-1571	[1]	BOLT
9.	8K-0726	[1]	SPACER
10.	9F-0348	[1]	PIN
	3B-4615	[1]	COTTER PIN
11.	3H-7550	[1]	CLIP
12.	8K-0762	[1]	CABLE ASSEM.
13.	9N-1534 C	[2]	SPACER 19.84mm(.781 in.)thick
	3D-6650	[1]	SPACER 1.53mm(.060 in.) thick
14.	3D-6648	[2]	SPACER
	C		INDICATES CHANGE

#UEH0804S0267

8K-0159: COUNTERWEIGHT GP

COUNTERWEIGHT GP

COUNTERWEIGHT (8K159 N/S)--Rear--5700 Pounds

c201185 UEH0804S

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6J-4081	[4]	BOLT
	3K-5234	[4]	WASHER
2.	8K-4133	[1]	COUNTERWEIGHT
3.	8K-2725	[1]	TREAD (L.H. side top)
4.	8K-2727	[1]	TREAD (center)
5.	8K-2726	[1]	TREAD (R.H. side top)
6.	8K-3898	[6]	BOLT
	3F-1417	[6]	WASHER
	8K-3970	[6]	SPACER
8.	8K-3709	[1]	PLATE (name)

#UEH0804S0268

8K-0155: PLATFORM GROUP

PLATFORM GROUP

8K155 PLATFORM GROUP
Note: 8K4371 Floormat Assembly is available

c208929 UEH0804S

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8K-1163	[1]	COVER
	8K-1354	[1]	WRAPPER ASSEM.
2.	9F-6445	[3]	NUT
3.	0S-1615 C	[16]	BOLT
	3B-4504 C	[16]	LOCKWASHER
4.	8K-1358	[1]	COVER ASSEM.
5.	9F-6445	[1]	NUT
6.	8K-1137	[1]	PIN ASSEM.
7.	0S-0509 C	[12]	BOLT
	3B-4506 C	[12]	LOCKWASHER
8.	8K-3081 C	[1]	PLATE
	4B-4159 C	[6]	SCREW
9.	8K-1433	[1]	GROMMET
10.	4K-5718	[3]	GROMMET
11.	8K-1169	[1]	SHEET
12.	8K-1149	[1]	COVER
13.	8K-1170	[1]	SHEET
14.	8K-2250	[1]	SUPPORT ASSEM. (R.H.)
15.	4B-4278	[4]	WASHER
16.	8K-2251	[1]	SUPPORT ASSEM. (L.H.)
17.	8K-1164	[1]	COVER
	8K-1356	[1]	WRAPPER ASSEM.
18.	9F-6445	[4]	NUT
19.	8K-1403	[1]	PLATFORM ASSEM.
20.	9F-6445	[16]	NUT
21.	1S-5304	[3]	LUG
22.	3J-5169	[4]	NUT
23.	2J-3348	[1]	BLOCK
24.	8K-2136	[1]	BLOCK
25.	9F-2978	[37]	NUT
26.	8K-1136	[2]	CLIP
27.	8K-2133	[1]	BLOCK
28.	4H-2558	[1]	GROMMET
29.	8S-4513	[1]	MOUNTING
30.	1B-4333	[4]	NUT
	3B-4516	[4]	LOCKWASHER
31.	0S-1822	[4]	WASHER
32.	8S-4515	[4]	MOUNTING
33.	4B-4276 C	[4]	WASHER
34.	3H-1591 C	[1]	SCREW
35.	2V-1191 C	[2]	STRIP
36.	3L-1979 C	[2]	PLUG
	C		INDICATES CHANGE

#UEH0804S0269

8K-0165: WALKWAY

WALKWAY

WALKWAY (8K165 N/S)

c114907 UEH0804S

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8K-7737	[2]	WALKWAY ASSEM.
2.	8K-7739	[1]	WALKWAY ASSEM.
3.	6H-1717	[18]	BOLT
	3B-4508	[18]	LOCKWASHER
	4B-4280	[18]	WASHER
4.	8K-7738	[1]	WALKWAY ASSEM.

Information:

POWER TRAIN

DRIVE GP-FINAL

Special Instruction

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}

Specifications

Final Drive<BR> (8K175)
225 EXCAVATOR HYDRAULIC SYSTEM

Final Drive<BR> (8K175-Right Side) (8K176-Left Side)
225 EXCAVATOR HYDRAULIC SYSTEM

Final Drive<BR> (3V5273) (on machines 51U2832-Up and 76U1649-Up)
225 EXCAVATOR HYDRAULIC SYSTEM

Tool Operating Manual

226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Disassembly and Assembly

Sprockets
225 EXCAVATOR VEHICLE SYSTEMS

Final Drives
225 EXCAVATOR VEHICLE SYSTEMS

Sprockets
225 EXCAVATOR VEHICLE SYSTEMS

Final Drives
225 EXCAVATOR VEHICLE SYSTEMS

Service Magazine

SAE 30 Oil Now Used In Swing Drive And Final Drive{5459,4070}
1980/02/25

Replacement Sprocket Rim Available{4156,4164}
1982/09/20

Correct Installation Of Sprocket In Final Drive{4164,4058,0374}
1982/11/15

Add Oil Any Time Track Motor, Parking Brake Or Final Drives Are Installed{4055,4070,4353,4351}
1984/11/19

New Collet-Type Collar Used To Fasten Sprocket To Final Drive{4156,4164,4184,4058}
1985/03/18

Different Sealant And Higher Bolt Torque Used In Final Drive{4074,4050}
1986/03/10

Check Bolt Torque On Excavators Equipped With Collar-type Sprocket Assemblies{4164,4184,7522}
1990/05/14

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29

Managing the Life Cycles of Excavator Final Drives {4050}
2007/07/16

Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Final Drive Motor Housings Are Available for Certain Excavators {4050}
2015/06/19

An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 225 :

8K-0176 FINAL DRIVE GROUP

8K-0175 FINAL DRIVE GROUP

8K-0172 CARBODY

8K-1913 GEAR & BEARING GP

8K-4685 FRONT IDLER GROUP

8K-0170 FRONT IDLER

8K-0164 DRIVE GP-SWING

3K-5801 BRAKE AS

8K-2681 PUMP DRIVE GROUP

8K-0177 PARKING BRAKE GROUP

8K-0185 SWING BRAKE CONTROL

8K-0159 COUNTERWEIGHT GP

8K-0155 PLATFORM GROUP

Truck sale:

CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld

CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO

CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus

Call

1986 CAT 225

Sound Heavy Machinery
North Carolina

USD $26,900

1977 CAT 225

Construction Station
Wayne, Michigan