AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9K2 FUEL LINES GROUP Serial No. 70H4261-Up 941 TRACK LOADER


FUEL SYSTEM
LINES GP-FUEL
TANK GP-FUEL
CONTROL GP-GOVERNOR
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

TRACK LOADER 941 TRACK LOADER 70H
 941B TRAXCAVATOR 70H02942-04263 (MACHINE) UEH0843S 941 70H   (1979)

FUEL SYSTEM

LINES GP-FUEL
FUEL SYSTEM GROUP
6K-2983 FUEL SYSTEM GROUP
FUEL LINES GROUP
9K-0002 FUEL LINES GROUP
FUEL LINES GROUP
9K-0002 FUEL LINES GROUP
 

#UEH0843S0020
 

9K-0002: FUEL LINES GROUP

9K2 FUEL LINES GROUP
Serial No. 70H4261-Up
c208096 UEH0843S
9K0002 FUEL LINES GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9K-9325 [1] TUBE ASSEM.  
2. 3A-2431 [2] CLIP  
3. 4F-4879 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
4. 7K-1456 [1] UNION  
5. 9M-8406 C [1] CLIP  
6. 5K-9235 C [1] ELBOW  
7. 4B-4278 [3] WASHER  
8. 4S-1936 C [1] CLIP  
9. 5P-1520 CH HOSE 91.4 cm(35.98 in.)  
10. 1V-3546 C [2] COUPLING  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEH0843S0021
 

9K-0037: FUEL TANK GROUP

9K37 FUEL TANK GROUP--35 Imperial Gallons--159 litres
Serial No. 70H4094-Up
c202173 UEH0843S
9K0037 FUEL TANK GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-2755 [1] TANK ASSEM.  
    (Includes)
2. 8H-3496 [1] FITTING  
3. 1L-5784 [1] FITTING  
4. 1F-2417 [1] FITTING  
5. 4B-5441 [1] CAP ASSEM.  
    (Includes)
6. 4B-5949 [2] ELEMENT  
7. 4B-5423 [1] GASKET  
8. 2A-1763 [1] GASKET  
9. 3F-4134 [1] BAFFLE  
10. 3H-8389 [1] BOLT  
11. 7B-2002 [1] WASHER  
12. 8H-3497 [1] RING  
13. 1M-1682 [1] PLUNGER  
14. 8H-3498 [1] STRAINER ASSEM.  
15. 5K-9246 [1] CONNECTOR  
16. 1S-1830 [2] VALVE ASSEM.  
17. 0S-1589 [6] BOLT  
  3B-4510 [6] LOCKWASHER  
  9H-3457 [6] WASHER  
 

#UEH0843S0022
 

3A-3702: GOVERNOR CONTROL GROUP

3A3702 GOVERNOR CONTROL GROUP
Serial No. 70H2942 to 70H4093 inclusive
c202270 UEH0843S
3A3702 GOVERNOR CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7F-8092 [1] KNOB  
2. 0L-1351 [4] BOLT  
3. 3B-4506 [8] LOCKWASHER  
4. 5K-0065 [2] BRACKET  
5. 4B-4278 [4] WASHER  
6. 6D-5974 [2] BEARING  
7. 1J-5799 [1] PIN  
8. 5K-9259 [1] SHAFT  
9. 7K-1873 [1] LEVER  
10. 1B-0676 [4] PIN  
11. 3B-4615 [4] COTTER PIN  
12. 3K-4618 [1] LEVER  
13. 4H-4851 [1] LEVER  
14. 0S-1591 [6] BOLT  
15. 1D-4717 [2] NUT  
16. 3A-2716 [2] BRACKET  
17. 5K-9260 [1] SHAFT  
18. 1B-8706 [2] KEY  
19. 5K-2294 [2] BEARING  
20. 1A-9252 [2] ROD END  
21. 9K-9302 [1] ROD  
22. 2K-0400 [2] END  
23. 5B-9079 [4] NUT  
24. 5K-9255 [1] LEVER  
25. 1B-8704 [1] KEY  
26. 0S-1588 [1] BOLT  
27. 5B-0639 [1] WASHER  
28. 8K-6981 [1] ROD  
29. 1L-3047 [2] WASHER  
 

#UEH0843S0023
 

9K-0035: GOVERNOR CONTROL GROUP

9K35 GOVERNOR CONTROL GROUP
Serial No. 70H4094-Up
c209922 UEH0843S
9K0035 GOVERNOR CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-8800 [1] LEVER ASSEM.  
    (Includes)
2. 1V-8798 [1] WASHER  
3. 7F-8092 [1] KNOB  
4. 1J-5799 [1] PIN  
5. 0L-1351 [4] BOLT  
  4B-4278 [4] WASHER  
6. 3B-4506 [8] LOCKWASHER  
7. 1V-0045 [1] BRACKET  
8. 8B-4037 C [1] WASHER  
9. 6D-5974 [2] BEARING  
10. 1V-4542 [2] SPACER  
11. 1V-6977 [1] WASHER  
12. 0L-0821 [1] SEAT  
13. 4B-5273 [1] WASHER  
14. 1V-4543 [1] SHAFT  
15. 1V-4546 [1] BAR  
16. 4M-8012 C [1] NUT  
17. 5D-0998 [6] SPRING  
18. 1V-4541 [3] DISC  
19. 1V-8799 [1] SPACER  
20. 1B-0676 [4] PIN  
  3B-4615 [4] COTTER PIN  
21. 1A-9252 [2] YOKE END  
22. 5B-9079 [4] NUT  
23. 8K-6981 [1] ROD  
24. 4H-4851 [1] LEVER  
25. 1B-8706 [2] KEY  
26. 5K-9260 [1] SHAFT  
27. 0S-1591 [6] BOLT  
28. 1D-4717 [2] NUT  
29. 3A-2716 [2] BRACKET  
30. [2] BEARING  
31. 3K-4618 [1] LEVER  
32. 9K-9687 [1] ROD  
33. 2K-0400 [2] ROD END  
34. 1V-0026 [1] LEVER  
35. 1B-7182 [1] BOLT  
  C   INDICATES CHANGE
 

#UEH0843S0024
 

3A-1590: STARTING MOTOR

STARTING MOTOR (3A1590 N/S)--24 Volt
3A1872 Motor parts are shown on Pages 22 and 23
c130799 UEH0843S
3A1590 STARTING MOTOR Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1589 [2] BOLT (1.75" Long)  
  8S-2332 [1] BOLT (1.62" Long)  
  3B-4510 [3] LOCKWASHER  
2. 4H-7869 [1] GASKET  
3. 3A-1872 Y [1] MOTOR ASSEM.  
    (See Separate Illustration)
4. 9F-4337 [1] WIRE ASSEM.  
5. 7F-8032 [1] TERMINAL  
6. 9F-5509 [2] INSULATOR  
7. 9F-3068 [1] TERMINAL  
    (Parts of 9F4337 Assem.)
  Y   SEPARATE ILLUSTRATION
 

#UEH0843S0025
 

7S-4090: STARTING MOTOR GP-ELECTRIC

7S4090 ELECTRIC STARTING MOTOR GROUP--24 Volt
2P2502 and 3P6 Motor parts are shown on Pages 24 through 27
AN ATTACHMENT
c200337 UEH0843S
7S4090 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-2502 YC [1] MOTOR  
    -OR-
  3P-0006 Y [1] MOTOR  
    (Separate Illustration)
2. 8S-2332 [3] BOLT  
3. 3B-4510 [3] LOCKWASHER  
4. 4H-7869 [1] GASKET  
5. 9F-4337 [1] WIRE ASSEM.  
6. 7F-8032 [1] TERMINAL (Ground)  
7. 9F-5509 [2] INSULATOR  
8. 9F-3068 [1] TERMINAL  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEH0843S0026
 

7S-4090: STARTING MOTOR GP-ELECTRIC

7S4090 ELECTRIC STARTING MOTOR GROUP--24 Volt--Type 2
4N3182 and 4N7752 Electric Starting Motor parts are shown on Pages 27A through 27F
AN ATTACHMENT
c211432 UEH0843S
7S4090 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-3182 C [1] MOTOR GROUP  
    -OR-
  4N-7752 YC [1] MOTOR GROUP  
    (Separate Illustration)
2. 7J-8902 [3] BOLT  
  8D-5054 [3] WASHER  
3. 4H-7869 [1] GASKET  
4. 9F-4337 [1] WIRE ASSEM.  
5. 9F-3068 [1] TERMINAL  
6. 7F-8032 [1] TERMINAL (Ground)  
7. 9F-5509 [1] INSULATOR  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEH0843S0027
 

3A-1872: STARTING MOTOR ASSEMBLY

3A1872 STARTING MOTOR ASSEMBLY--24 Volt--Part 1 of 2
Part of Starting Motor shown on Page 21
c216624 UEH0843S
3A1872 STARTING MOTOR ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
8. 6H-3622 [1] BOLT  
  4F-9676 [1] WASHER  
9. 1D-4719 [4] NUT  
  6F-9005 [4] NUT (Jam)  
  3B-4508 [4] LOCKWASHER  
  7F-0560 [3] WASHER  
31. 3A-4899 [1] ADAPTER (T)  
  3A-1559 A [1] KIT (brushes) A  
  3A-2288 B-1 [1] KIT (hardware-part 1) B-1  
  3A-2289 B-2 [1] KIT (hardware-part 2) B-2  
  3A-2290 B-3 [1] KIT (hardware-part 3) B-3  
  3A-1565 C [1] KIT (bearing) C  
  3A-1567 D [1] KIT (lever housing assem.) D  
  3A-2859 E [1] KIT (clutch assem.) E  
    -OR-
  3A-4900 T [1] KIT (clutch assem.) T  
  3A-1631 F [1] KIT (pinion assem.) F  
  3A-1868 G [1] KIT (support and brush assem.) G  
  3A-1870 H [1] KIT (drive housing assem.) H  
  3A-1871 I [1] KIT (frame assem.) I  
  3A-3956 J [1] KIT (pinion) J  
 

#UEH0843S0028
 

3A-1872: STARTING MOTOR ASSEMBLY

3A1872 STARTING MOTOR ASSEMBLY--24 Volt--Part 2 of 2
Part of Starting Motor shown on Page 21
c209927 UEH0843S
3A1872 STARTING MOTOR ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
26. 3A-4580 [1] COIL ASSEM. (field)  
  3A-1555 J [1] KIT (Switch Assem.) J  
  3A-1556 K [1] KIT (Contact) K  
  3A-1557 L [1] KIT (Carcase Assem.) L  
  3A-1560 M [1] KIT (Terminal Assem.) M  
  3A-1568 N [1] KIT (Lever Assem.) N  
  3A-1633 O [1] KIT (Seals) O  
  3A-1648 P [1] KIT (Coil Assem.) P  
    -or-
  3A-4804 S [1] KIT (Coil Assem.) S  
  3A-1867 Q [1] KIT (Armature Assem.) Q  
  3A-2291 R [1] KIT (Cover Contact) R  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#UEH0843S0029
 

2P-2502: STARTING MOTOR GP-ELECTRIC

2P2502 ELECTRIC STARTING MOTOR GROUP--Delco-Remy--24 Volt--Part 1 of 2
Part of 7S4090 Electric Starting Motor Group shown on Page 21
6N5123 Switch parts are shown on Page 28
c155230 UEH0843S
2P2502 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7F-4556 [9] BOLT  
  1L-4789 [9] LOCKWASHER  
2. 4M-0189 [2] SEAL  
3. 2L-8166 [1] WASHER  
4. 3P-0173 [1] FRAME ASSEM.  
5. 9F-2247 [1] PLUG  
  9F-2547 [1] WICK  
6. 3P-0170 [1] BUSHING  
7. 6N-5123 YC [1] SWITCH ASSEM.  
    (Separate Illustration)
8. 6H-3622 [4] SCREW ASSEM.  
9. 4M-1850 [1] HOUSING ASSEM.  
  2B-4602 [1] PLUG  
  9F-2547 [1] WICK  
10. 1M-9968 [1] BUSHING  
11. 2F-6678 [1] SEAL  
12. 5L-9056 [4] BRUSH  
13. 8M-5814 [4] SCREW ASSEM.  
14. 066-5545 [2] HOLDER  
15. 5L-8884 [2] SPRING  
16. 5L-8887 [2] SUPPORT ASSEM.  
    (Includes)
17. 9F-3483 [1] LEAD  
18. 4B-4441 [2] RIVET  
19. 5L-8888 [1] PIN  
20. 3L-3867 [2] SCREW  
  4B-2047 [2] NUT  
  7H-2079 [2] LOCKWASHER  
21. 4M-8472 [2] HOLDER  
22. 1S-0297 [1] HOUSING ASSEM.  
    (Includes)
23. 4M-1896 [1] BUSHING  
24. 2P-4708 [1] DRIVE ASSEM. (800068)  
    (Includes)
25. 9S-9771 [1] PINION  
  9S-9770 [1] SPRING  
    -OR-
26. 6N-3827 CH [1] DRIVE ASSEM. (480118)  
27. 4M-1851 [1] GASKET  
28. 1M-9971 [1] SPACER  
29. 8H-1141 [4] SHOE  
30. 3R-8797 [8] SCREW ASSEM.  
31. 3P-0174 [1] COIL ASSEM.  
32. 1H-2629 [1] STRIP  
33. 4M-1833 [5] SCREW 1.5 in. (3.81 cm) long  
  7M-0336 [1] SCREW .86 in. (2.18 cm) long  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE FOR 2P4708 DRIVE ASSEM.:
  9S-9825 [1] KIT (cup)  
  4S-9459 [1] KIT (washer)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   NOT PART OF 2P2502 STARTING MO
 

Information:

Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Specifications
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Water Separator<BR> (Sleeve Metering Fuel System - PC &amp; DI)
3304 VEHICULAR ENGINE
Fuel Bypass Valve<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Fuel Filter Base With Check Valve Prevents High Fuel Pressure After The Engine Is Stopped{1262}
1979/03/05
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank{1275,1253,1274}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

Caterpillar Parts SIS Catalog 941 :

FUEL LINES GROUP
9K-0002 FUEL LINES GROUP
FUEL SYSTEM GROUP
6K-2983 FUEL SYSTEM GROUP
ENGINE MOUNTING HARDWARE GROUP
5K-9717 ENGINE MOUNTING HARDWARE GROUP
3A-1756 ENGINE MOUNTING HARDWARE GROUP
MUFFLER MOUNTING GROUP
3A-5687 MUFFLER MOUNTING GROUP
MUFFLER GROUP
7S-7134 MUFFLER GROUP
CAP GP-PROTECTION
1P-8678 CAP GP-PROTECTION
CAP GP-PROTECTION
1P-8678 CAP GP-PROTECTION
FUEL TANK GROUP
9K-0037 FUEL TANK GROUP
GOVERNOR CONTROL GROUP
3A-3702 GOVERNOR CONTROL GROUP
GOVERNOR CONTROL GROUP
9K-0035 GOVERNOR CONTROL GROUP
STARTING MOTOR
3A-1590 STARTING MOTOR
STARTING MOTOR GP-ELECTRIC
7S-4090 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
7S-4090 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR ASSEMBLY
3A-1872 STARTING MOTOR ASSEMBLY
3A-1872 STARTING MOTOR ASSEMBLY

Truck sale:

Caterpillar 941, Construction
3,000 
Caterpillar 941, Construction
- track loaders
MICHIGAN CAT
7038 - CAT 941
 
7038 - CAT 941

avspare
1974 CAT 941
USD $13,750 
1974 CAT 941

WESTERN MICHIGAN EQUIPMENT
Traverse City, Michigan
1980 CAT 941
Call 
1980 CAT 941

DDG Equipment
1974 CAT 941
USD $5,500 
1974 CAT 941

RP Equipment
Allentown, Pennsylvania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.