AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J6773 PISTON MOTOR GROUP--Link--Part 2 of 2 Serial No. 64R265-Up. Also part of 8K2631 Swing Motor Lines Group shown on Page 62 Note: Two required for propelling track and one required for actuating swing 235


HYDRAULIC SYSTEM
MOTOR GP
PUMP GP
PLATE GP-HYDRAULIC BLOCKING
PUMP GP
VALVE GP-COMBINER & RELIEF
LINES GP-SWING
VALVE GP-RELIEF
LINES GP-TRAVEL MOTOR

EXCAVATOR 235 EXCAVATOR 64R
 235 EXCAVATOR - 64R1-64R454 BASIC ENGINE NOT INCLUDED 64R00001-UP (MACHINE) UEH0887S 235 64R   (1977)

HYDRAULIC SYSTEM

MOTOR GP
MOTOR GP-PISTON-LINK
8J-6773 MOTOR GP-PISTON-LINK
8J-6773 MOTOR GP-PISTON-LINK
MOTOR GP-PISTON-LINK
8J-6773 MOTOR GP-PISTON-LINK
8J-6773 MOTOR GP-PISTON-LINK
GUARD GP-TRACK MOTOR
8K-3830 GUARD GP-TRACK MOTOR
GUARD GP-TRACK MOTOR
8K-3830 GUARD GP-TRACK MOTOR
TRACK MOTOR GUARD GROUP
2V-1175 TRACK MOTOR GUARD GROUP
 

#UEH0887S0130
 

8J-6773: MOTOR GP-PISTON-LINK

8J6773 PISTON MOTOR GROUP--Link--Part 2 of 2
Serial No. 64R265-Up. Also part of 8K2631 Swing Motor Lines Group shown on Page 62
Note: Two required for propelling track and one required for actuating swing
c160124 UEH0887S
8J6773 MOTOR GP-PISTON-LINK Parts scheme
  For full view, you need register

Parts for your 235 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-6280 [1] PLATE  
2. 8J-6856 [1] DOWEL  
3. 7F-8267 [1] SEAL  
4. 8J-6235 [1] JOINT ASSEM.  
    (Includes)
  2R-1256 [2] RING  
5. 8J-6244 [1] RACE AND ROLLER ASSEM. (outer)  
  8J-6243 [1] RACE (inner)  
6. 9J-8052 C [1] RETAINER  
7. 6J-7846 [3] RACE  
8. 8J-6234 [1] SHAFT  
9. 3S-6867 [1] BEARING  
10. 6J-7855 [2] RING  
11. 6J-8712 [1] WASHER ASSEM.  
    (Includes)
12. 4S-6525 [1] DOWEL  
13. 6J-7857 [1] BOLT  
  8J-6236 [1] LOCK  
14. 8J-6781 [1] TUBE ASSEM.  
15. 8J-6241 [1] SPRING  
16. 8J-6274 [1] RING  
17. 8J-6324 [9] PISTON  
18. 8J-6276 [9] RETAINER  
19. 6J-7836 [9] RING  
20. 8J-6699 [1] BARREL  
21. 6J-7854 C [1] RING  
22. 6J-8439 [9] LINK  
23. 8J-6273 [9] RING  
24. 8J-6240 [9] RETAINER  
  C   INDICATES CHANGE
 

#UEH0887S0131
 

8J-5615: GEAR PUMP GROUP

8J5615 GEAR PUMP GROUP
Serial No. 64R1 to 64R417 inclusive
c118673 UEH0887S
8J5615 GEAR PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 235 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-4625 [8] STUD  
2. 8H-5724 [8] NUT  
3. 6J-2391 [8] WASHER  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  8J-9239 [1] KIT (Seal)  
    (Includes Seals, Plates & Retainer)
  8J-9420 [1] KIT (Gear Pump-Rear)  
  8J-9421 [1] KIT (Gear Pump-Front)  
 

#UEH0887S0132
 

8K-3570: PLATE GP-HYDRAULIC BLOCKING

8K3570 HYDRAULIC BLOCKING PLATE GROUP
Only separate parts serviced
UEH0887S0132 UEH0887S
  For full view, you need register

Parts for your 235 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-8092 [1] BLOCKING PLATE ASSEMBLY  
  9S-8093 [1] BLOCKING PLATE ASSEMBLY  
  9S-8094 [1] BLOCKING PLATE ASSEMBLY  
  4F-7391 [1] SEAL  
  4F-7952 [1] SEAL  
  7F-8267 [1] SEAL  
 

#UEH0887S0133
 

3G-1686: PUMP GP-GEAR

3G1686 GEAR PUMP GROUP
Serial No. 64R418-Up
c161676 UEH0887S
3G1686 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your 235 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-0974 [8] STUD  
2. 8H-5724 [8] NUT  
3. 6J-2391 [8] WASHER  
4. 7J-4772 [1] COUPLING  
  5S-1522 [1] RING  
5. 9J-5654 [2] SEAL  
6. 3G-1280 [1] SPACER  
7. 9J-9841 [1] PLUG  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  8J-9239 [1] KIT (seal)  
    (Includes Seals, Plates, & Retainer)
  8J-9420 [1] KIT (Gear-Pump-Rear)  
  3G-1858 [1] KIT (Gear Pump-Front)  
 

#UEH0887S0134
 

8J-8921: VALVE GP-COMBINER & RELIEF

8J8921 COMBINER AND RELIEF VALVE GROUP
Part of 8K2631 Swing Motor Lines Group shown on Page 62. 8J9357 Valve parts
are shown on Page 63
c203959 UEH0887S
8J8921 VALVE GP-COMBINER & RELIEF Parts scheme
  For full view, you need register

Parts for your 235 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-8960 [2] SPRING  
2. 8J-8908 C [1] VALVE GP  
3. 9S-8010 [2] PLUG-O-RING  
  2S-4078 [2] SEAL-O-RING  
4. 8J-9357 Y [1] VALVE GP-RELIEF  
5. 9S-8005 [1] PLUG-O-RING  
  3K-0360 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#UEH0887S0135
 

8K-2631: LINES GP-SWING MOTOR

SWING MOTOR LINES (8K2631 N/S)
8J6773 Motor and 8J8921 Valve parts are shown on Pages 58, 59 and 61
c148586 UEH0887S
8K2631 LINES GP-SWING MOTOR Parts scheme
  For full view, you need register

Parts for your 235 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4556 [8] BOLT  
2. 3B-4507 [16] LOCKWASHER  
3. 1P-3704 [4] SEAL  
4. 8J-6773 Y [1] MOTOR GROUP  
    (Separate Illustration)
5. 1V-1387 [1] TUBE ASSEM.  
6. 9S-4181 [1] PLUG  
  7M-8485 [1] SEAL  
7. 1V-1389 [1] TUBE ASSEM.  
8. 9S-4181 [1] PLUG  
  7M-8485 [1] SEAL  
9. 0T-0768 [24] BOLT  
10. 8J-8921 Y [1] VALVE GROUP  
    (Separate Illustration)
11. 1P-5766 [8] FLANGE  
12. 8K-2775 [2] HOSE ASSEM.  
13. 1P-3703 [4] SEAL  
14. 0S-1585 [7] BOLT  
  3B-4508 [7] LOCKWASHER  
15. 2M-0849 [3] WASHER  
16. 1V-1388 [1] SUPPORT ASSEM.  
17. 4N-3641 [1] HOSE ASSEM. (36 in. long)  
18. 1D-4609 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
19. 030-7950 [1] ELBOW  
  3D-2824 [1] SEAL  
20. 4B-4279 C [16] WASHER  
21. 3R-9704 C [1] ELBOW  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEH0887S0136
 

8J-9357: VALVE GP-RELIEF

8J9357 RELIEF VALVE GROUP
Part of 8J8921 Combiner and Relief Valve Group shown on Page 61
c118130 UEH0887S
8J9357 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your 235 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8002 [2] PLUG  
  3J-7354 [2] SEAL  
2. 5J-2437 [1] BODY GROUP  
3. 5J-3237 [1] STOP  
4. 4J-5309 [1] SEAL  
5. 4J-0519 [1] SEAL  
6. 5J-0901 [1] VALVE  
7. 5J-0704 [1] BODY ASSEM.  
8. 2J-0075 [1] SPRING  
9. 4J-0523 [1] SEAL  
10. 3J-3435 [1] BODY GROUP  
11. 4J-5573 [1] SEAL  
12. 8S-9089 [1] BOLT  
  3B-4508 [2] LOCKWASHER  
13. 4J-0522 [1] SEAL  
14. 8F-9206 [1] SEAL  
15. 3B-1915 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
16. 5J-4571 [1] SPRING  
17. 5J-2722 [1] SHIM (.048 in. thick)  
  5J-2721 [12] SHIM (.005 in. thick)  
 

#UEH0887S0137
 

8K-2632: TRACK MOTOR LINES GROUP

8K2632 TRACK MOTOR LINES GROUP--Part 1 of 3
Serial No. 64R1 to 64R332 inclusive
8J7231 Swivel parts are shown on Page 67
c203971 UEH0887S
8K2632 TRACK MOTOR LINES GROUP Parts scheme
  For full view, you need register

Parts for your 235 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-7948 [2] ELBOW  
2. 9K-3529 [1] TUBE ASSEM.  
3. 9K-3540 [3] CLIP  
4. 0S-1594 [8] BOLT  
5. 4J-8265 [12] NUT  
6. 5M-2894 [20] WASHER  
7. 8K-3959 [2] ANGLE  
8. 0S-1591 [4] BOLT  
9. 8K-4805 [2] ANGLE ASSEM.  
  9F-2978 [3] NUT (weld)  
10. 0S-1588 [4] BOLT  
11. 1P-3703 [8] SEAL  
12. 8K-1974 [4] CLAMP  
13. 0L-1352 [2] BOLT  
14. 9K-3527 [1] TUBE ASSEM.  
15. 8M-0505 [1] CONNECTOR  
16. 3K-0360 [3] SEAL  
17. 2B-0947 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
18. 2V-0286 [1] HOSE ASSEM.  
20. 1P-3704 [4] SEAL  
21. 2V-0287 [1] HOSE ASSEM.  
23. 0T-0768 [32] BOLT  
  4B-4279 [32] WASHER  
24. 3B-4507 [16] LOCKWASHER  
25. 8J-7231 Y [1] SWIVEL GROUP  
    (Separate Illustration)
26. 8K-3843 [1] PLATE ASSEM.  
27. 2V-0289 [1] HOSE ASSEM.  
28. 2V-0288 [1] HOSE ASSEM.  
31. 7J-7187 [1] CONNECTOR  
  4K-1388 [1] SEAL  
32. 9K-3533 [1] TUBE ASSEM.  
33. 9K-3536 [1] BRACKET ASSEM.  
34. 9F-2978 [2] NUT  
35. 9K-3535 [1] TUBE ASSEM.  
36. 9K-3530 [1] TUBE ASSEM.  
37. 2R-6276 [2] CONNECTOR  
  3D-2824 [2] SEAL  
38. 9K-3534 [1] TUBE ASSEM.  
39. 1P-5766 [16] FLANGE  
40. 8K-4908 [4] MANIFOLD  
41. 4F-5192 [16] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#UEH0887S0138
 

8K-2632: TRACK MOTOR LINES GROUP

8K2632 TRACK MOTOR LINES GROUP--Part 2 of 3
Serial No. 64R1 to 64R332 inclusive
8J2601 Valve parts are shown on Page 68
c207101 UEH0887S
8K2632 TRACK MOTOR LINES GROUP Parts scheme
  For full view, you need register

Parts for your 235 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0319 [36] BOLT  
2. 3B-4507 [26] LOCKWASHER  
3. 1V-2193 [1] TUBE ASSEM.  
4. 1P-3704 [10] SEAL  
5. 1V-2192 [1] TUBE ASSEM.  
6. 1P-5761 [6] FLANGE  
7. 1V-2186 [1] TUBE ASSEM.  
8. 1H-2415 [4] BOLT  
9. 3B-4508 [4] LOCKWASHER  
10. 8K-3842 [1] ARM  
11. 1D-4719 [2] NUT  
12. 2V-0795 C [1] TUBE ASSEM.  
13. 8J-2601 Y [1] VALVE GROUP (track brake)  
    (Separate Illustration)
14. 005-4173 [1] ELBOW  
  2M-9780 [1] SEAL  
15. 9K-9855 [1] TUBE ASSEM.  
16. 5P-0931 [1] TEE  
  067-6684 C [1] REDUCER  
  1P-0043 [1] NUT  
17. 8K-3871 [1] TUBE ASSEM.  
18. 3R-2704 [1] UNION  
19. 0S-1595 [12] BOLT  
20. 0S-1587 [1] BOLT  
21. 2H-3788 [11] NUT  
  2M-0849 [11] WASHER  
22. 1V-2183 [5] CLAMP  
23. 1V-2185 [1] TUBE ASSEM.  
24. 8K-3829 [1] ANGLE  
25. 1V-2194 [1] TUBE ASSEM.  
26. 8K-3856 [1] TUBE ASSEM.  
27. 6K-5535 C [2] CLIP  
  6K-5536 [2] BRACKET  
28. 1D-4556 [2] BOLT  
29. 4B-4279 [12] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEH0887S0139
 

8K-2632: TRACK MOTOR LINES GROUP

8K2632 TRACK MOTOR LINES GROUP--Part 3 of 3
Serial No. 64R1 to 64R332 inclusive
c207102 UEH0887S
8K2632 TRACK MOTOR LINES GROUP Parts scheme
  For full view, you need register

Parts for your 235 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-5761 [2] FLANGE  
2. 0T-0319 [12] BOLT  
3. 7K-4129 [1] UNION  
4. 8K-3940 [1] TUBE ASSEM.  
5. 8B-6127 [3] CLIP  
6. 1B-3057 [3] CLIP  
7. 8K-3935 [1] ANGLE  
8. 0S-1595 [2] BOLT  
9. 3B-4508 [2] LOCKWASHER  
10. 2M-0849 [2] WASHER  
11. 0S-1588 [5] BOLT 1.25 in. (3.18 cm) long  
12. 4J-8265 [5] NUT  
13. 5M-2894 [8] WASHER  
14. 8K-3933 [1] TUBE ASSEM.  
15. 8K-2377 [1] ELBOW  
  4K-1388 [1] SEAL  
16. 030-7948 [1] ELBOW  
17. 3K-0360 [1] SEAL  
18. 8K-3939 [1] TUBE ASSEM.  
19. 2R-6806 [1] CONNECTOR  
20. 3J-1907 [2] SEAL  
21. 6K-5291 C [2] CLIP  
  6K-5290 [2] BRACKET  
22. 8K-3870 [1] TUBE ASSEM.  
23. 1P-3704 [2] SEAL  
24. 9S-7739 [1] UNION  
25. 8K-3938 [1] TUBE ASSEM.  
26. 030-7947 [1] ELBOW  
27. 8K-3932 [1] ANGLE  
28. 0S-1594 [1] BOLT 1 in. (2.54 cm) long  
  3B-4506 [1] LOCKWASHER  
29. 8K-3934 [1] TUBE ASSEM.  
30. 3B-4507 [8] LOCKWASHER  
31. 4B-4279 [4] WASHER  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Installation Of 3G3843 Motor Group{5058}
Installation Of 3G3843 Motor Group{5058}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Track &amp; Swing Motors<BR> (8J6773)
235 EXCAVATOR HYDRAULIC SYSTEM
Track &amp; Swing Motors<BR> (3G3843 &amp; 1U2778)
235 EXCAVATOR HYDRAULIC SYSTEM
Track &amp; Swing Motors<BR> (4T3068)
235 EXCAVATOR HYDRAULIC SYSTEM
Track Motor (9T1208)
SUPPLEMENT FOR HYDRAULIC TRACK MOTOR
Swing Motor And Track Motors<BR> (8J6773)
235 FRONT SHOVEL HYDRAULIC SYSTEM
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Universal Joint Assemblies For Hydraulic Link Motors In 943-973 Track Loaders, 225-245B Excavators, 235 and 245 Front Shovels, and227 Loggers{0599, 3251, 4351, 5058}
Universal Joint Assemblies For Hydraulic Link Motors In 943-973 Track Loaders, 225-245B Excavators, 235 and 245 Front Shovels, and227 Loggers{0599, 3251, 4351, 5058}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Track Motors
SUPPLEMENT FOR HYDRAULIC TRACK MOTOR
Motors
235 EXCAVATOR VEHICLE SYSTEMS
Swing Motor
235 EXCAVATOR VEHICLE SYSTEMS
Track Motors
235 EXCAVATOR VEHICLE SYSTEMS
Service Magazine
Snap Ring No Longer Used On Shaft Of Piston-Type Hydraulic Pumps And Motors{5070,5058}
1980/08/04
Maximum Permissible Rates For Case Drain Leakage Permit Field Checks Of Piston-Type Hydraulic Pumps And Motors{5070,5058}
1980/09/01
Shorter Bolts Used In Four Locations To Fasten Piston Motor Head To Body{3201,4351,5058}
1982/03/01
New Shaft And Retainer Available For Field Installation In Piston Type Hydraulic Motors{5058,3201,4351}
1982/07/19
New Track Motor{3201,4351,5058}
1983/07/11
Checking And Adjusting Travel Drift{5058,5063}
1984/08/13
Add Oil Any Time Track Motor, Parking Brake Or Final Drives Are Installed{4055,4070,4353,4351}
1984/11/19
Identification Grooves Used On Slippers For Pistons In Hydraulic Pumps And Motors{5070,5058}
1984/11/26
Identification Of Track Motor Universal Joint Assemblies{3251,3201,5058}
1985/05/27
New Shaft Available For Parts Service On Earlier Piston Link Motors Without Port Plates{5058,3201,4351}
1985/07/15
Track Balance Line Removed From Track Motor Lines Group {5057,5051,5050}
1985/09/16
Change Made To 3G225 Housing To Prevent Failure Of 9J9847 Swivel Group{5060,5057,7050,4351}
1978/11/20
Installation Of New Seals In Former Track Motor Lines Swivel Groups{5060}
1988/11/14
New Hose Assembly Used In Track Motor Lines Group{5057}
1979/07/02
Loose Orifices Or Ones Not Installed In Main Hydraulic Control Valves Can Cause Track Chatter{5451,5058,4150,4351}
1979/10/15
Remanufactured Caterpillar Piston Pump And Motor Barrels Available{5070,3208,4351,5058}
1990/12/17
Improved Track Motor Lines {5057}
1993/02/15
Information Release Memo PELE0401 Has Information About Remanufactured Hydraulic Piston Pump And Piston Motor Groups {0374,4134,4136,4351,5058,5070,5080,5314,5315,5473}
1994/12/26
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27

Caterpillar Parts SIS Catalog 235 :

MOTOR GP-PISTON-LINK
8J-6773 MOTOR GP-PISTON-LINK
8J-6773 MOTOR GP-PISTON-LINK
MOTOR GP-PISTON-LINK
8J-6773 MOTOR GP-PISTON-LINK
VALVE GP-FOLLOWER
8J-8447 VALVE GP-FOLLOWER
VALVE GP
6J-9277 VALVE GP
VALVE GP-SERVO
8J-6898 VALVE GP-SERVO
8J-1905 PUMP GP-PISTON
PUMP GP-PISTON
8J-1905 PUMP GP-PISTON
GEAR PUMP GROUP
8J-5615 GEAR PUMP GROUP
8K-3570 PLATE GP-HYDRAULIC BLOCKING
PUMP GP-GEAR
3G-1686 PUMP GP-GEAR
VALVE GP-COMBINER & RELIEF
8J-8921 VALVE GP-COMBINER & RELIEF
LINES GP-SWING MOTOR
8K-2631 LINES GP-SWING MOTOR
VALVE GP-RELIEF
8J-9357 VALVE GP-RELIEF
TRACK MOTOR LINES GROUP
8K-2632 TRACK MOTOR LINES GROUP
8K-2632 TRACK MOTOR LINES GROUP

Truck sale:

 
15,300 
Caterpillar LIFT TRUCKS ETR235, Misc Forklifts, Material handling equipment
- Misc Forklifts
MADISA
Caterpillar DX235LRC, Crawler Excavators, Construction
59,132 
Caterpillar DX235LRC, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
 
19,000 
Caterpillar LIFT TRUCKS ETR235A, Misc Forklifts, Material handling equipment
- Misc Forklifts
MADISA
 
24,600 
Caterpillar ETR235, Misc Forklifts, Material handling equipment


 
22,000 
Caterpillar 235, Crawler Excavators, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.