AVSPARE.COM
parts catalog

UNDERCARRIAGE AR 1400065 - Caterpillar



1400065 UNDERCARRIAGE AR Caterpillar parts D5C III UNDERCARRIAGE
Rating:
16
Alternative (cross code) number:
CA1400065
140-0065
1400065
Caterpillar 1400065 UNDERCARRIAGE AR

Buy UNDERCARRIAGE AR 1400065 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

You can buy parts: .

$12.66

13 Nov 2019
0.02[0.00] Pounds
Red Horse Performance 1400-06-5 Hose End Socket, Clear
Superior strength || Leak proof performance || High quality
  For full view, you need register

Compatible equipment models: 1400065:

TRACK-TYPE TRACTOR  D5C III   Caterpillar

Information:

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01057511
Align bearings (11) in the body of the engine oil pump. Align the joints of the bearings to 45 15 degrees from the centerline of the bearing bores.
Use Tooling (A) in order to install bearings (11). The bearings must be 1.5 0.5 mm (0.06 0.02 inch) below the gear bore. Measure the inside diameter of the bearings after installation. The inside diameter of the bearings must be 31.811 0.013 mm (1.2524 0.0005 inch) after installation. Machine the bearing, if necessary.
Illustration 2 g00591963
Install shaft assemblies (10) in body (9).
Illustration 3 g01057514
Ensure that dowels (12) are installed in cover assembly (7) at a distance of 6.0 0.5 mm (0.24 0.02 inch) above the surface of the cover.
Use Tooling (A) in order to install bearings (8) in cover assembly (7) with the bearing joints in the correct position.
Illustration 4 g00591936
Place cover assembly (7) into position and install the bolts.
Illustration 5 g00591932
Ensure that the two pins in cover assembly (6) are installed at a distance of 6.0 1.0 mm (0.24 0.04 inch) above the surface of the cover. Install cover assembly (6).
Illustration 6 g01005318
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Place clean engine oil on valve spool (5). Install valve spool (5), spring (4), gasket (3), cover (2), and the bolts.
Illustration 7 g01005273
Install the gasket and adapter (1). End By:
Install the engine oil pump.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
D5C D5C LGP XL Series III Tractors Power Shift 6ZL00001-UP (MACHINE) POWERED BY 3046 Engine


Parts undercarriage Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.