UNDERCARRIAGE AR 9Q5034 - Caterpillar

Illustration 1 g02027693
(1) Torque for the 8 bolts ... 135 20 N m (100 15 lb ft) (2) Torque for the 8 bolts ... 135 20 N m (100 15 lb ft) (3) Pack grease into 1/3 of the cavity in order to lubricate the lip of the seal. Use 5P-0960 Molybdenum Grease. (4) 213-3410 Carrier (5) Lubricate both ends of the splines with grease on installation. (6) 213-3409 Flange Note: Apply 4C-5592 Anti-Seize Compound to threads. (7) 146-2985 Lock Plate (8) Torque for the 3 bolts ... 240 20 N m (175 15 lb ft) (9) Torque for the 9 bolts ... 240 20 N m (175 15 lb ft)Note: Before setting the torque for the nine bolts (9), back off flange (6) in order to ensure that there is full contact between carrier (4) and the rear face of the hitch assembly. Torque nuts (9). Adjust the flange in order to give an end float of 0.275 0.125 mm (0.011 0.005 inch). Install locking lock plate (7) and three bolts (8).