1217648 UNIVERSAL JOINT Caterpillar parts
M312, M313C, M315, M315C, M316C, M318
Rating:
Alternative (cross code) number:
CA1217648
121-7648
1217648
CA1217648
121-7648
1217648
WHEELED EXCAVATOR,
Compatible equipment models: 1217648:
Information:
Introduction
This Technical Information Bulletin describes damage that may occur to the sensor harness for the rear axle. The solution for this damage is identified below.Problem
The 236-7711 Sensor Harness (Rear Axle Oil Temperature) may have inadequate length between the clips at the differential and the trunnion. This may cause the harness to be damaged when the rear axle oscillates.Potential indicators of this problem include the following:
The indicator for rear axle oil temperature may flash.
The indicator for rear axle oil temperature may remain on steadily.
Abnormal service codes for the sensor for the rear axleSolution
Check the harness. If the harness is undamaged, move 25 mm (1.0 inch) of slack from the section of the harness that is nearest to the sensor. Move the slack to the other side of the clip that is nearest to the sensor.If the harness is damaged, replace the harness with a new 236-7711 Sensor Harness (Rear Axle Oil Temperature). The green tape on the new harness will indicate the correct location for the clips for the new harness.
This Technical Information Bulletin describes damage that may occur to the sensor harness for the rear axle. The solution for this damage is identified below.Problem
The 236-7711 Sensor Harness (Rear Axle Oil Temperature) may have inadequate length between the clips at the differential and the trunnion. This may cause the harness to be damaged when the rear axle oscillates.Potential indicators of this problem include the following:
The indicator for rear axle oil temperature may flash.
The indicator for rear axle oil temperature may remain on steadily.
Abnormal service codes for the sensor for the rear axleSolution
Check the harness. If the harness is undamaged, move 25 mm (1.0 inch) of slack from the section of the harness that is nearest to the sensor. Move the slack to the other side of the clip that is nearest to the sensor.If the harness is damaged, replace the harness with a new 236-7711 Sensor Harness (Rear Axle Oil Temperature). The green tape on the new harness will indicate the correct location for the clips for the new harness.
Caterpillar parts catalog:
Parts universal Caterpillar catalog:
2430972
UNIVERSAL JOINT GP
M315C, M315D, M316C, M316D, M318C, M318D
M315C, M315D, M316C, M316D, M318C, M318D
1215938
UNIVERSAL JOINT GP
M312, M315
M312, M315
1217657
UNIVERSAL JOINT GP
M312, M313C, M315, M315C, M316C, M318
M312, M313C, M315, M315C, M316C, M318
2430904
UNIVERSAL JOINT GP
M315C, M315D, M316C, M316D, M318C, M318D
M315C, M315D, M316C, M316D, M318C, M318D
1125015
UNIVERSAL JOINT GP
M312, M313C, M315, M315C, M315D, M316C, M316D, M318, M318C, M318D
M312, M313C, M315, M315C, M315D, M316C, M316D, M318, M318C, M318D
1215940
UNIVERSAL JOINT GP
M312, M313C, M315, M315C, M315D, M316C, M316D, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH
M312, M313C, M315, M315C, M315D, M316C, M316D, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH
1341376
UNIVERSAL JOINT GP
M313C, M313D, M315C, M315D, M316C, M318, M318C, M320
M313C, M313D, M315C, M315D, M316C, M318, M318C, M320
1949216
UNIVERSAL JOINT GP
M316C, M318C
M316C, M318C
2374550
UNIVERSAL JOINT GP
M313C, M313D, M315C, M315D 2
M313C, M313D, M315C, M315D 2
2679150
UNIVERSAL JOINT GP
M313C, M313D
M313C, M313D
1217647
UNIVERSAL JOINT AS
M312, M313C, M315, M315C, M316C, M318
M312, M313C, M315, M315C, M316C, M318
6L4385
UNIVERSAL JOINT
G342C
G342C
2167957
UNIVERSAL JOINT GP
CPT372, RM-300
CPT372, RM-300
2167954
UNIVERSAL JOINT GP
CPT372
CPT372
2164732
UNIVERSAL JOINT
SPF343, SPF343C, SPS343, SPT343
SPF343, SPF343C, SPS343, SPT343
2165154
UNIVERSAL JOINT
SCT673, SPS342, SPT342
SCT673, SPS342, SPT342
4C9819
UNIVERSAL JOINT
3606, 3608, 3612, 3616, G3606, G3608, G3612, G3616
3606, 3608, 3612, 3616, G3606, G3608, G3612, G3616
3949374
UNIVERSAL JOINT GP
M318D MH
M318D MH
3793044
UNIVERSAL JOINT GP
M318D MH, M322D MH
M318D MH, M322D MH
3723536
UNIVERSAL JOINT GP
M313D, M315D 2
M313D, M315D 2
3338012
UNIVERSAL JOINT GP
M315D, M316D, M318D
M315D, M316D, M318D
3338009
UNIVERSAL JOINT GP
M315D, M316D, M317D 2, M318D, M318D MH
M315D, M316D, M317D 2, M318D, M318D MH
1217647
UNIVERSAL JOINT AS
M312, M313C, M315, M315C, M316C, M318
M312, M313C, M315, M315C, M316C, M318