UNIVERSAL JOINT GP 2V4373 - Caterpillar

2V4373 UNIVERSAL JOINT GP Caterpillar parts 824C, 980C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2V4373
2V-4373
2V4373

Weight: 0.99 pounds 0 kg.

Buy UNIVERSAL JOINT GP 2V4373 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL DOZER, WHEEL LOADER,

Compatible equipment models: 2V4373:

WHEEL DOZER 824C

WHEEL LOADER 980C Caterpillar

Number on catalog scheme: 2

Caterpillar 2V4373 Parts scheme UNIVERSAL JOINT GP

For full view, you need register

Information:

Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury to persons on or near the machine.Prevent possible injury by performing the procedure that follows before working on the machine.
The machine must be parked on a level surface before the parking brake is adjusted. Block the wheels of the machine in order to prevent the machine from moving when the parking brake is adjusted.
Install the steering frame lock. Refer to Operation and Maintenance Manual, "Steering Frame Lock".
Start the engine.
If the body or OEM attachment can be raised, raise the body or OEM attachment and install the body prop or OEM attachment prop. Refer to Systems Operation, Testing and Adjusting, "Machine Preparation for Troubleshooting".If the body or OEM attachment cannot be raised, the parking brake can be accessed from a position beneath the machine.
Disengage the parking brake.
Illustration 1 g01032565
Remove plug (5) and gasket (6) from parking brake (4) .
Illustration 2 g01032566
Insert a 6mm allen wrench into parking brake (4). Turn the allen wrench in a clockwise direction until resistance is felt. The gap between two brake shoes (7) and brake disc (8) should be zero.
To set the initial running clearance, turn the allen wrench in a counterclockwise direction. You will feel a click on the allen wrench. Turn the allen wrench for eight clicks.
Illustration 3 g01032567
Illustration 4 g01032568
Use a feeler gauge to check the gap between two brake shoes (7) and brake disc (8). The running clearance between the brake shoes and the brake disc is 0.575 0.075 mm (0.023 0.003 inch) on each side of the brake disc.
If the running gap is not correct, increase or reduce the number of clicks. Refer to Steps 7 through 9.
Install plug (5) and gasket (6) .
Engage the parking brake. Lower the body or OEM attachment. Shut off the engine.
Remove the blocks from the wheels and then remove the steering frame lock. Refer to Operation and Maintenance Manual, "Steering Frame Lock".