4308922 UNIVERSAL JOINT AS Caterpillar parts
R1300G, R1300G II, R1600G, R1600H
Rating:
Alternative (cross code) number:
CA4308922
430-8922
4308922
CA4308922
430-8922
4308922
Weight: 13 pounds 6 kg.
LOAD HAUL DUMP,
This part in 4 request:
Show.
This information for suppliers only!
2023-06-02
2022-04-05
2021-07-09
2020-03-11
Number on catalog scheme:
2
For full view, you need register
Information:
Probable Causes
Active codes and logged codes
Low-quality fuel
Fuel injectors
Lack of lubrication
Valve train components
Gear train and components of the lower endRecommended Actions
Table 1
Troubleshooting Test Steps Values Results
1. Check for Codes
A. Establish communication between Cat® Electronic Technician (ET) and the Electronic Control Module (ECM). Refer to Troubleshooting, "Electronic Service Tools", if necessary.
B. Download the "Warranty Report" from the engine ECM before performing any troubleshooting or clearing codes.
Codes
Result: There are no codes present.
Proceed to Test Step 2.
Result: There are active codes.
Repair: Troubleshoot any active codes before continuing with this procedure.
2. Check the Fuel Quality
A. Refer to Operation and Maintenance Manual for information on the proper characteristics of the fuel for the engine. If necessary, obtain a fuel analysis to confirm that the correct fuel is being used for the engine. Refer to Systems Operation/Testing and Adjusting, "Fuel Quality - Test" for the proper procedure.
Fuel
Result: The fuel quality is OK.
Proceed to Test Step 3.
Result: The fuel quality is not OK.
Repair: Replace the fuel. Verify that the
Active codes and logged codes
Low-quality fuel
Fuel injectors
Lack of lubrication
Valve train components
Gear train and components of the lower endRecommended Actions
Table 1
Troubleshooting Test Steps Values Results
1. Check for Codes
A. Establish communication between Cat® Electronic Technician (ET) and the Electronic Control Module (ECM). Refer to Troubleshooting, "Electronic Service Tools", if necessary.
B. Download the "Warranty Report" from the engine ECM before performing any troubleshooting or clearing codes.
Codes
Result: There are no codes present.
Proceed to Test Step 2.
Result: There are active codes.
Repair: Troubleshoot any active codes before continuing with this procedure.
2. Check the Fuel Quality
A. Refer to Operation and Maintenance Manual for information on the proper characteristics of the fuel for the engine. If necessary, obtain a fuel analysis to confirm that the correct fuel is being used for the engine. Refer to Systems Operation/Testing and Adjusting, "Fuel Quality - Test" for the proper procedure.
Fuel
Result: The fuel quality is OK.
Proceed to Test Step 3.
Result: The fuel quality is not OK.
Repair: Replace the fuel. Verify that the
Caterpillar parts catalog:
Parts universal Caterpillar catalog:
R1600, R1600G, R1600H
793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 797, 797B, 797F
3526379
UNIVERSAL JOINT GP
797, 797B, 797F
797, 797B, 797F
1446456
UNIVERSAL JOINT GP
D400E II
D400E II
735, 735B, 740, 740B, 776D, 777D, 777F, 777G
1267353
UNIVERSAL JOINT GP
D350E, D400E
D350E, D400E
3978099
UNIVERSAL JOINT GP
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
3575499
UNIVERSAL JOINT
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F
R1700 II, R1700G