8E8926 UNIVERSAL JOINT GP Caterpillar parts
D4H
Rating:
Alternative (cross code) number:
CA8E8926
8E-8926
8E8926
CA8E8926
8E-8926
8E8926
Weight: 10 pounds 4 kg.
TRACK-TYPE TRACTOR,
Compatible equipment models: 8E8926:
Number on catalog scheme:
1
For full view, you need register
Information:
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01321915
Position gear pump (3) and install bolts (2). Connect hose assemblies (4).
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Lower the cab. Refer to Disassembly and Assembly, "Cab - Tilt".
Illustration 2 g01322019
Raise the lift arms and remove the cylinder lock (1) .
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01321915
Position gear pump (3) and install bolts (2). Connect hose assemblies (4).
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Lower the cab. Refer to Disassembly and Assembly, "Cab - Tilt".
Illustration 2 g01322019
Raise the lift arms and remove the cylinder lock (1) .
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts universal Caterpillar catalog:
950F, 950F II, 960F
1126548
UNIVERSAL JOINT GP
994, 994D
994, 994D
2T2997
UNIVERSAL JOINT GP
611, 615C
611, 615C
928G, IT28G
9U4983
UNIVERSAL JOINT GP
844, 844H, 844K, 990, 990 II, 990H, 990K
844, 844H, 844K, 990, 990 II, 990H, 990K
2304110
UNIVERSAL JOINT GP
784B, 784C, 785B, 785C, 785D
784B, 784C, 785B, 785C, 785D
1457056
UNIVERSAL JOINT GP
950F II, 960F
950F II, 960F