UNIVERSAL JOINT GP 8Y0787 - Caterpillar

8Y0787 UNIVERSAL JOINT GP Caterpillar parts 950F, 950F II, 960F

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8Y0787
8Y-0787
8Y0787

Weight: 35 pounds 16 kg.

Buy UNIVERSAL JOINT GP 8Y0787 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

8Y0787 - Universal Joint Group for Caterpillar (CAT)

$275.75

07 Apr 2022

US: Florida-Parts-Z

8Y0787 - Universal Joint Group for Caterpillar (CAT)
FIRST PRICE PARTS

$209.25

13 Jan 2019

CATERPILLAR AFTERMARKET: CATERPILLAR AFT

Caterpillar Joint GP 8Y0787 New

29 Dec 2017
3728 Hundredths Pounds
CTP: CTP

Caterpillar JOINT GP (8Y0787) New Aftermarket By CTP
8Y0787 Weight(lbs): 37.20 Length(cm): 95.3000 Width(cm): 17.8000 Depth(cm): 8.9000

Show more prices Caterpillar parts

Number on catalog scheme: 12

Caterpillar 8Y0787 Parts scheme UNIVERSAL JOINT GP

For full view, you need register

Compatible equipment models: 8Y0787:

WHEEL LOADER 950F 950F II 960F Caterpillar

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Start By:
Remove the turbochargers. Refer to Disassembly and Assembly, "Turbochager - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00615014
Install Tooling (A) in the top of exhaust elbow (1). Attach a suitable lifting device onto Tooling (A). The weight of exhaust elbow (1) is approximately 48 kg (106 lb).
Remove bolts (2). Lift exhaust elbow (1) from the engine.
Illustration 2 g00615016
Remove the bolt and clamp (3). Remove bolts and clamps (4) from each end of tube assembly (5). Remove tube assembly (5). Inspect the seals at the end of tube assembly (5). If the seals are damaged or deteriorated, obtain new seals for assembly.
Illustration 3 g00615017
Attach a suitable lifting device onto support bracket (7). The weight of support bracket (7) is approximately 117 kg (257 lb).
Remove bolts (6). Remove support bracket (7). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g00615017
Attach a suitable lifting device onto support bracket (7). The weight of support bracket (7) is approximately 117 kg (257 lb). Position support bracket (7) onto the engine.
Install bolts (6).
Illustration 5 g00615016Note: Ensure that the seals are installed in the ends of tube (5).
Position tube assembly (5) and install bolts and clamps (4) onto each end of tube assembly (5). Install the bolt and clamp (3).
Illustration 6 g00615014
Install Tooling (A) in the top of exhaust elbow (1). Attach a suitable lifting device onto Tooling (A). The weight of exhaust elbow (1) is approximately 48 kg (106 lb). Position exhaust elbow (1).
Install bolts (2). End By:
Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".