V-JOINT KIT 0316116 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-2241     Camshaft Bearing Tool Group     1    
8H-0684 Ratchet Wrench     1    Start By:
Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01038778
Use Tooling (A) to remove the camshaft bearing from the cylinder block.Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-2241     Camshaft Bearing Tool Group     1    
8H-0684 Ratchet Wrench     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the bore in the cylinder block for the camshaft bearing is clean and free of debris.
Illustration 2 g01038778
Use Tooling (A) to install the camshaft bearing in the cylinder block.Note: Align the oil holes in the camshaft bearing and the cylinder block. The camshaft bearing should be installed to a depth that is flush with the face of the recess in the cylinder block.End By: Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".