V-BELT 0778763 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6K-0806 Cable Strap 3 Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00960222
Illustration 2 g00960224
If the rocker shaft will not be disassembled, install the Tooling (A) around the rocker arms (4) in order to slightly compress the springs (5). The rocker arms must be held away from the machined faces of the cylinder head (2) during installation.
Remove the Torx screws (1) from the rocker shaft (3).
Remove the rocker shaft assembly from the cylinder head.
Remove the pushrods (6) from the cylinder head. Place an identification mark on each of the pushrods for installation.